Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

CLAMP, LOOP

Awarded
SPE7L126V6225Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract SPE7L126V6225, awarded by the Defense Logistics Agency to Spencer Manufacturing Co LLC (CAGE 11TQ7), was for the supply of a CLAMP, LOOP (NSN 5340-00-057-3037) with an original estimated value of $3,074.76. However, the award was subsequently canceled in its entirety through a unilateral modification issued on July 16, 2026, under the authority of FAR 13.302(a), reducing the total contract value to $0.00. The cancellation resulted from the contractor’s inability to perform, and no delivery, inspection, or acceptance activities occurred. The contract was issued under NAICS code 332510 for fabricated structural metal manufacturing, with no socioeconomic certifications, small business status, or affirmative representations documented. The contracting officer, Robert Michael of DLA Land and Maritime, executed the modification and served as the sole point of contact, with no Contracting Officer’s Representative or technical representative identified. No packaging, marking, inspection, or quality standards were specified, and no MIL-STD requirements or detailed specifications were provided. The place of performance was implicitly the contractor’s facility in Port Huron, MI, but no delivery destination, FOB terms, or invoicing procedures were established. The original solicitation issued on March 4, 2026, was processed through DIBBS, and proposals were to be submitted to the Columbus, OH mailing address. No attachments, clauses, or special requirements such as security clearances, OCI provisions, or option periods were included. The contract remains terminated with no active obligations, deliverables, or future performance.

General Info

Defense Logistics Agency awards Spencer Manufacturing Co LLC $X for CLAMP, LOOP NSN 5340000573037 effective July 16, 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(1)

SPE7L126V6225_P00001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
ContactsNo contacts available
OfficeUSA
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUSA
ContactsNo contact information available

Full Description

Show more
DLA award SPE7L126V6225 posted on DIBBS. Awardee: SPENCER MANUFACTURING CO LLC (CAGE 11TQ7) Total Contract Price: See Award Doc Award Date: 07-16-2026 Line items: - CLAMP, LOOP (NSN/Part 5340000573037)

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
Federal
COVER,ACCESS
Solicitation # N0010426QFD73
This contract, issued under solicitation N0010426QFD73 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA, mandates the supply of an Access Cover for a 3-inch Combination Hull and Backup Ball Valve, designated as SPECIAL EMPHASIS Level I material due to its critical role in shipboard systems where failure could result in catastrophic loss of life, vessel, or system integrity. The item must comply strictly with Naval Sea Systems Command Drawing 845-4558796 and be fabricated from ASTM-B369, alloy UNS C96400, with mandatory quantitative chemical and mechanical certification traceable to heat-lot identifiers permanently marked on the component. All production and repair welding, brazing, and radiographic inspection must adhere to specified Navy standards including S9074-AQ-GIB-010/248, S9074-AR-GIB-010A/278, and T9074-AS-GIB-010/271, with full qualification data submitted for prior approval. Radiography is required on every component and must be accompanied by shooting sketches and film submitted for Navy acceptance at least 45 working days prior to source certification. The contract requires complete material traceability from raw stock through all manufacturing steps to the final delivered item, with electronic submission of test certifications and compliance documents via the Wide Area Work Flow system to Portsmouth Naval Shipyard using DODAAC N50286, with inspections and acceptances also processed through N39040. The vendor must maintain a certified quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, subject to government surveillance and audit at the source. Electronic signatures on certification documents are valid under strict control protocols, and all submissions must be unqualified, with no disclaimers permitted. Delivery of material is capped at 365 days after contract effective date, with certification data submitted no later than 20 days prior to scheduled delivery and subject to official review and acceptance prior to shipment. Subcontractors are bound by the same quality and traceability requirements, and the prime contractor is responsible for enforcing compliance throughout the supply chain. The contract is issued under emergency acquisition flexibilities and is DO-rated under the Defense Priorities and Allocations System, prioritizing national defense use. Any deviations, waivers, or
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 493190
New
DIBBS
Management of Government-Owned Contractor-Operated (GOCO) retail fuel facilities at Altus AFB, OK, Dyess AFB, TX, McConnell AFB, KS, Scott AFB, IL, Offutt AFB, NE, Whiteman AFB, MO.
Solicitation # SPE603-26-R-0527
The Defense Logistics Agency (DLA) Energy is soliciting six separate firm-fixed-price contracts to manage, maintain, and operate Government-Owned, Contractor-Operated (GOCO) retail fuel facilities at six U.S. Air Force bases: Altus AFB, OK; Dyess AFB, TX; McConnell AFB, KS; Offutt AFB, NE; Scott AFB, IL; and Whiteman AFB, MO. The contract requires the selected contractor to ensure the safe, accurate, and timely receipt, storage, transfer, issuance, and accountability of all Defense Wide Working Capital Fund (DWWCF)-owned petroleum products, with strict adherence to environmental, safety, security, and quality control standards. Operations must support base missions, airshows, deployments, exercises, and contingencies under all conditions, including heightened security and adverse weather, while maintaining 24/7 self-service automated fuel station availability for ground vehicles. The contractor is responsible for operator and system maintenance of all facilities, equipment, vehicles, and systems, and must conduct training to ensure personnel are fully qualified. All work must conform to detailed Performance Work Statements (PWS) for each location, including staffing, dispatching, product receipt, inventory management, laboratory testing, and quality surveillance. The procurement is set aside entirely for Service-Disabled Veteran-Owned Small Businesses (SDVOSBs) under NAICS code 493190. Offers are due by August 10, 2026, and will be evaluated under a Lowest Price Technically Acceptable (LPTA) approach, where technical compliance is a pass/fail gate requiring an Acceptable rating across all sub-factors: staffing, operations, maintenance, and contractor-furnished facilities and equipment. Contracts have a four-year base period from November 1, 2026, to October 31, 2030, with a five-year option period through October 31, 2035, and a potential six-month extension through April 30, 2036. The contractor must submit a Quality Control Plan acceptable to the Government, comply with ISO standards if used, and adhere to calibration requirements per ISO 10012. The contract mandates a Security Plan addressing physical, personnel, information, and operational security with contingency procedures for power outages, access controls, and Force Protection Conditions. The contractor assumes fiduciary responsibility for all Government-owned fuel, maintains custody without transferring title, and must
Other Warehousing and Storage

POSTED

2 days ago

DEADLINE

in 4 days
View Details