Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CLAMP, LOOP

Active
SPE7M2-26-Q-0724Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 570 units of CLAMP, LOOP with NSN 5340-01-657-0195 under solicitation SPE7M2-26-Q-0724, issued by the Department of Defense’s Nuclear Reactor Program. The requirement is set aside entirely for small businesses under FAR 19.5, with a NAICS code of 332510, and a response deadline of August 11, 2026. Delivery is scheduled 477 days after award, with performance to occur in San Diego, CA, 92136-3581. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. The item involves export-controlled technical data subject to ITAR or EAR, restricting any disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Access to this data is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. The primary point of contact is Victoria Payne, reachable via email and phone, and further details are accessible through the DIBBS portal.

General Info

570 CLAMP, LOOP units for small businesses, delivery in 477 days, ITAR/EAR controlled, San Diego, CA, response deadline August 11, 2026.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

SBA

Documents

(1)

SPE7M2-26-Q-0724.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
Victoria Payne
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLAMP,LOOP
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5340-01-657-0195 Quantity: 570 EA Purchase Request: 7017235248QTY: 570 Delivery: 477 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
Supply of Machine Thread Plugs (NSN: 5365-011146444)The contract entails the supply of standardized machine thread plugs designated by NSN 5365-011146444, manufactured to meet military specifications for precision applications in defense or industrial systems. These components are critical for ensuring thread integrity and dimensional accuracy in high-stakes operational environments, requiring strict adherence to quality and performance standards. The offering is structured as a subcontract with recurring delivery obligations, indicating an ongoing need for these hardware items across multiple procurement cycles. The solicitation was posted on August 5, 2026, with a response deadline of August 12, 2026, and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The North American Industry Classification System code 332510 identifies the category as machine shop and related services, underscoring the manufacturing and precision machining nature of the work. Performance is expected to be coordinated under DLA-managed logistics channels, though specific delivery locations are not outlined. Interested parties must respond through the official DIBBS portal prior to the deadline to be considered for award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9329
The contract pertains to the procurement of a Right Hand Single Arm Mounting Bracket, identified by NSN 5340016150030 and OSHKOSH DEFENSE LLC part number 3764286, with a total quantity of 176 units. Delivery is required within 116 days under FOB Origin terms, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit container type D3, and marking per MIL-STD-129 with no special marking codes. Packaging and palletization must adhere to DLA’s official procurement requirements, and hazardous materials handling provisions apply if relevant. The contract is issued under a Small Business Set-Aside, with the solicitation number SPE7LX-26-U-9329 and a response deadline in August 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures following MIL-STD-1916 or ASQ H1331, and zero non-conformances expected unless otherwise stated. Identification of U.S. military property must conform to MIL-STD-130N. The unit of issue is each, priced at $176.00 per unit, for a total estimated price of $30,976.00, though this amount is not guaranteed for full purchase by the IDC.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-917N
This contract, identified by solicitation number SPE7L1-26-T-917N, is for the procurement of 346 units of a clamp and loop component with NSN 5340-01-030-4980, priced at $346.00 per unit, totaling $119,716.00. Delivery is required FOB origin within 119 days, with the original delivery date set for November 25, 2026, and a needed ship date of December 15, 2026. All supplies must comply with stringent technical and quality requirements drawn from the DLA Master List of Technical and Quality Requirements, with specific mandates including MIL-STD-130N for identification marking, MIL-STD-1916 or ASQ H1331 for zero-defect sampling, and strict adherence to packaging standards per MIL-STD-129 and RP001. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitution requires prior approval. Compliance documentation such as the Certificate of Quality Compliance is mandatory, and the Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. The item must be shipped to the designated delivery point at DLA District San Joaquin, 25600 S Chrisman Road, Rec Whse 57, Tracy, CA 95304-5000, with packaging requirements depending on hazardous material status per FED-STD-313: non-hazardous items follow ASTM D3951 unless superseded by DLA requirements, while hazardous items must comply with TQ requirement IP025. Palletization must conform to DLA packaging guidelines, and all packaging and labeling must meet MIL-STD-129 with correct Unit of Issue and Quantity per Unit Pack as specified. The contract mandates full and open competition with no set-asides, and all technical data and revisions referenced, including TDP Rev A Gen 1 based on drawing NR 19207, take precedence. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the official point of contact for procurement inquiries is Isabelle Szulewski, reachable via email and phone listed in the contract.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9318
The contract pertains to the procurement of 631 units of a mounting bracket identified by NSN 5340-01-647-8723 under purchase request 1000239184. The solicitation, numbered SPE7LX-26-U-9318, was posted on August 5, 2026, with a response deadline of August 20, 2026, and requires delivery within 113 days of award. The item falls under NAICS code 332510 and is being sourced by the Department of Defense through the Strategic Acquisition Program Directorate. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. Government identification must be removed from any non-accepted supplies. The primary point of contact is Theodore Misiolek, reachable via email and phone, and all submissions must be made through the DIBBS platform.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CRANK, HAND
Solicitation # SPE7LX-26-U-9330
The contract pertains to the procurement of 180 units of a hand crank identified by part number 1103-1945-01 and NSN 5340016237876 under solicitation SPE7LX-26-U-9330, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 76 days FOB origin with no variance allowed in quantity, and acceptance is to occur at the destination point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951 for non-hazardous items and FED-STD-313 for hazardous material classifications. All packaging and labeling must adhere to MIL-STD-129 and palletization must follow RP001 DLA Packaging Requirements. The supply is covered under DLA Direct, CONUS, and the unit of issue is each, with a total price of $180. Documentation for source approval must be submitted if proprietary or insufficient data exists, and government identification must be removed from non-accepted supplies. The contract’s technical specifications are derived from the DLA Master List, the applicable revision of which is controlled by the solicitation issue date. Point of contact for inquiries is Theodore Misiolek, with the response deadline set for August 20, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
LEVER (FPC)
Solicitation # SPEFA3-26-Q-0054
The contract pertains to the procurement of 8 units of a lever designated as FPC with part number 70209-21221-113 and NSN 1560-LLQJ59653, under solicitation SPEFA3-26-Q-0054, issued by the DLA Fleet Readiness Center Southeast. The contract specifies a firm fixed price with no variance allowed in quantity, requiring delivery within 30 days after award at destination with inspection and acceptance also occurring at the destination. The item is to be packaged in compliance with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence, and packaging must be marked and labeled per MIL-STD-129. Palletization must adhere to DLA Packaging Requirements, and unit of issue and packaging quantity must match contract specifications. Item Unique Identification is not required per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) applicable. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery address for freight shipping and parcel post is specified as the Fleet Readiness Center Southeast in Jacksonville, Florida, with the required delivery date set for August 4, 2026.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7LX-26-U-9327
The contract pertains to the procurement of 2,082 units of CLAMP, LOOP with NSN 5340-01-485-6847 under solicitation SPE7LX-26-U-9327, which was posted on August 5, 2026, with a response deadline of August 20, 2026. The acquisition is a Total Small Business Set-Aside as defined by FAR 19.5, classified under NAICS code 332510, and managed by the Strategic Acquisition Program Directorate within the Department of Defense. Delivery is required within 116 days after award, and the contract incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or amendment date. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed per RQ011. The point of contact for inquiries is Theodore Misiolek, reachable via email or phone provided.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A7-26-T-617P
The contract is for the procurement of 77 units of a SPACER, PLATE with NSN/Part Number 5365-00-768-1020 under solicitation SPE4A7-26-T-617P, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 233 days from award, with performance taking place in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and is classified under NAICS code 332510. This item is subject to a comprehensive set of technical, quality, and compliance requirements defined by the DLA Master List of Technical and Quality Requirements, including specific clauses such as RD002 on Covered Defense Information, RQ017 on physical identification and bare item marking, and RQ032 on export control. Technical data associated with this item is subject to ITAR or EAR regulations, restricting disclosure to foreign persons both within and outside the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been formally approved by DLA. Packaging, government identification removal, and cybersecurity compliance including CMMC Level 2 certification for third-party assessors are also mandatory.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-Q-1458
The item specified is a mounting bracket with NSN/Part Number 5340-01-670-3301, with a quantity of one unit and a delivery requirement of 159 days after order. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and non-accepted supplies must be stripped of all government identification prior to return. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign national employees and foreign subsidiaries of U.S. firms. Access to this controlled data is restricted only to DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from the DLA controlling authority. The solicitation number is SPE7L1-26-Q-1458, posted on August 5, 2026, with responses due by August 12, 2026, and the North American Industry Classification System code is 332510. Performance is required at Oak Harbor, WA 98278-5200, and inquiries should be directed to Vittorio Tambaro at the provided contact details.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CATCH, FLUSH
Solicitation # SPE7LX-26-U-9307
The contract pertains to the procurement of 806 units identified by NSN 5340-01-097-4918 under solicitation SPE7LX-26-U-9307, with a delivery requirement of 118 days after award. It mandates compliance with the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and incorporates requirements for Covered Defense Information as defined under RD002. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have all government identification removed prior to disposition. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and falls under NAICS code 332510. The contract is administered by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek listed as the primary point of contact, reachable via email and phone provided. The procurement is classified as federal with no set-aside designation specified.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
LOCK, RIM
Solicitation # SPE7LX-26-U-9319
The contract pertains to the procurement of 297 units of a LOCK, RIM with NSN 5340-01-652-0224, issued under solicitation SPE7LX-26-U-9319 by the Strategic Acquisition Program Directorate within the Department of Defense. The requirement is subject to the DLA Packaging Requirements for Procurement and incorporates technical and quality specifications identified by R or I numbers from the DLA Master List of Technical and Quality Requirements, which must be accessed online for full compliance. For this solicitation, the applicable version of the master list is determined by the solicitation issuance date. The contract is a total small business set-aside under FAR 19.5, with a NAICS code of 332510, indicating it is targeted toward small businesses in the manufacturing sector. The delivery deadline is set for 116 days after award, and the solicitation was posted on August 5, 2026, with responses due by August 20, 2026. Government identification must be removed from any non-accepted supplies in accordance with the specified requirements. The primary point of contact for inquiries is Theodore Misiolek, reachable via email and phone listed in the contract data.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-12TZ
This contract specifies the procurement of 3 hundred-count units of blind rivets under NSN 5320-01-033-8176, with a unit of issue of HD (100), requiring strict compliance with technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements. The item is designated as a critical application component and must conform to non-government standards NAS9304 Rev 7, NAS1686 Rev 5, and Quality Assurance Provision 13873, with inspections performed at origin and acceptance determined there as well. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and attributes must be verified at predefined levels corresponding to AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor characteristics. All packaging and labeling must follow MIL-STD-129 and ASTM D3951, with palletization governed by DLA packaging requirements, and no variance in quantity is permitted. Delivery is due in 165 days FOB origin to Hill Air Force Base, Utah, with a required ship date of January 26, 2027, and original delivery date of March 21, 2027. The contractor must provide a Certificate of Quality Compliance and ensure all materials bear proper physical identification per RQ017, with government identification removed from non-accepted items per RQ011. Packaging and marking must meet all DLA mandates that supersede industry standards, and transportation logistics are governed by DLAD procedural notes C19 and C20. The procurement is managed under solicitation SPE4A6-26-T-12TZ, with primary point of contact Debra Fowler, and the solicitation was issued on August 5, 2026, with responses due by August 13, 2026. The item falls under NAICS code 332510 and is sourced through the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE7M2-26-T-5996
This contract, identified by solicitation number SPE7M2-26-T-5996, specifies the procurement of 175 knobby items with NSN 5355-01-033-2742 under full and open competition. All supplies must comply with DLA’s Packaging Requirements and technical quality standards referenced in the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The contract strictly prohibits the intentional use of mercury or mercury-containing compounds except for specified functional applications such as batteries, fluorescent lights, and certain instruments, which must include secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are banned entirely, and any substitute materials require prior approval. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with plastics avoided for wrapping, cushioning, or dunnage whenever possible. Palletization follows DLA packaging standards, and items must be identified with MIL-STD-130N markings per NASM91528 and NASM3926 specifications. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are verified at stringent levels. Delivery is FOB origin to DLA Distribution San Joaquin in Tracy, California, with a required delivery date 161 days from order and a need ship date of January 26, 2027. Inspection and acceptance occur at destination, with no variance permitted in quantity. The contract mandates compliance with all applicable DoD standards and specifies David Larsen as the primary point of contact.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
SETSCREW
Solicitation # SPE7M2-26-T-5997
This contract pertains to the procurement of 40 set screws identified by NSN 5305-00-655-9246 and part number MS51021-10, under solicitation SPE7M2-26-T-5997, with a required delivery date 161 days from award and delivery terms FOB origin. The items are classified as commercial and must comply with stringent military and industry standards, including MIL-STD-130N for identification marking and MIL-STD-129 for packaging labels, with packaging governed by MIL-STD-2073-1E and DLA packaging requirements. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and all threads must be verified per System 22 of FED-STD-H28/20, excluding small internal and external threads. The hardware must conform to the current revision of the defining standard, with past revisions acceptable only for historically produced items. Mercury and mercury-containing compounds are strictly prohibited except for specific functional applications such as batteries, sensors, and instruments as defined by NAVSEA, with portable devices containing mercury requiring shockproof design and secondary containment per NAVSEA 5100-003D. Ozone-depleting chemicals are banned, and substitute chemicals require prior approval. The item is designated a critical application requiring CMMC Level 2 self-assessment for cybersecurity compliance. All deliveries must be shipped to DLA Distribution Depot Hill in Hill AFB, Utah, with strict adherence to transportation and palletization guidelines outlined in DLA procedural notes. The contract enforces full and open competition and prohibits any deviation from technical or quality requirements without an approved variance.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M2-26-T-5998
This contract specifies the procurement of an electrical receptacle connector identified by NSN 5935-01-171-9431 and part number MS3402D22-22P, manufactured in compliance with SAE AS34021 Revision E dated 01/01/2017 and referenced against SAE AS50151 Revision E dated 06/01/2020. The item is classified as a qualified product under the Qualified Products List for Federal Stock Class 5935, requiring adherence to procurement note H01. Technical and quality requirements are governed by the DLA Master List, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. The connector must not contain mercury or mercury-containing compounds except in permitted exceptions such as batteries, fluorescent lights, weapons systems, or specified instruments, with portable devices containing mercury requiring shockproof design and secondary containment as per NAVSEA 5100-003D. Strict packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with preservation following MIL-DTL-55330 for connectors. The item is designated as a critical application component, and configuration changes require formal engineering change proposals or variance requests. The contract calls for a quantity of 113 units to be delivered FOB origin within 161 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, with delivery directed to the DLA Distribution facility at New Cumberland, Pennsylvania. Packaging must be documented using the specified preserve, wrap, and cushioning codes per QUP 001, with a packaging code of U. No special marking is required. Transportation logistics follow DLA Procurement Notes C19 and C20. The solicitation was issued on August 5, 2026, with responses due by August 17, 2026, under contract number SPE7M2-26-T-5998, and the original required delivery date is March 27, 2027, although the need-by date is January 26, 2027. The unit price is $113.00 per unit, for a total contract value of $12,769.00, with the agency
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
POINTER ASSEMBLY
Solicitation # SPE7M2-26-Q-0721
The contract is for the procurement of 14 units of a POINTER ASSEMBLY with NSN 1720-00-867-0084 under solicitation SPE7M2-26-Q-0721, issued by the Department of Defense’s Nuclear Reactor Program through the Defense Logistics Agency. The requirement mandates that the vendor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization, ensuring adherence to stringent cybersecurity standards. Technical and quality specifications referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition’s scale. The technical data associated with this item is subject to U.S. export control regulations under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States, and restricts distribution strictly to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. Delivery is required within 250 days after delivery order issuance, with responses due by August 13, 2026. The point of contact for inquiries is Kyle Barr, reachable via email and phone provided, with all documentation accessible through the DIBBS portal.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE7M2-26-Q-0722
This contract specifies the procurement of terminal lugs identified by NSN 5940-01-054-6295 and part number MS21004-4, with a total quantity of 684 packing groups, each equivalent to 100 units, for a total of 68,400 individual terminals. The item is designated as a commercial item and is subject to qualification through the Qualified Products List or Qualified Manufacturers List. Technical compliance is governed by SAE AS21004F Revision F dated 12/01/2023 and SAE AS7928 Revision C dated 05/01/2019, with configuration changes requiring formal Engineering Change Proposal requests. The product must be free from intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional uses in batteries, lighting, instruments, weapon systems, or chemical reagents, and all exempt items must meet stringent containment and shock-proofing standards per NAVSEA 5100-003D. Delivery is set for 167 days after contract award, with FOB origin and inspection and acceptance points at destination. Pricing is firm fixed, with zero tolerance for quantity variance. Packaging must adhere strictly to MIL-STD-2073-1E and DLA packaging requirements, including use of approved materials, methods, and marking in accordance with MIL-STD-129 and ISO/IEC 16388 barcoding standards. The item is classified as critical application and subject to covered defense information protocols. The contract specifies the DLA distribution facility in New Cumberland, Pennsylvania, as the delivery point and includes detailed transportation protocols under DLAD Proc Notes C19 and C20. The solicitation, issued by the Department of Defense’s Nuclear Reactor Program, was posted on August 5, 2026, with responses due by August 12, 2026, and the material is required for delivery no later than April 6, 2027.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M2-26-Q-0723
The contract pertains to the supply of a CAP, CYLINDER ASSEMBLY with NSN/Part Number 0001S00000053 in a quantity of 11 units, under Purchase Request 7017441330. The item is subject to strict export control under ITAR or EAR, prohibiting unauthorized disclosure or transfer of associated technical data to foreign persons, regardless of location, and applies to all entities including U.S.-based firms and their foreign subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and distribution is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program (JCP) certification, have completed required DOD export control training, and have been formally approved by DLA to access such data. The contract is a total small business set-aside under solicitation SPE7M2-26-Q-0723, with responses due by August 14, 2026, and a delivery requirement of 781 days after delivery order issuance. Performance is located in San Diego, California, with Victoria Payne of the Department of Defense’s Nuclear Reactor Program serving as the primary point of contact. The contractor must also maintain CMMC Level 2 certification as a C3PAO and adhere to all documentation requirements for source approval requests.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
Precision Fastener Supply – Socket Head Cap ScrewsThe contract requires the supply of Socket Head Cap Screws with NSN 5305-00-959-1082 for use in critical defense systems, where reliability and performance are paramount. All components must meet stringent aerospace quality standards and provide full traceability from raw material through final inspection to ensure integrity in high-stakes operational environments. The items are classified as critical application components, mandating adherence to strict manufacturing, testing, and documentation protocols to support mission-critical defense infrastructure. The solicitation is issued as a subcontract under the NAICS code 332722 by the Nuclear Reactor Program within the Department of Defense, with performance required at Barstow, CA, 92311-5014. The opportunity was posted on August 4, 2026, and responses are due by August 11, 2026. All bidders must be prepared to demonstrate compliance with defense-grade specifications and quality assurance systems, including the ability to furnish complete documentation supporting material origin, processing, and inspection records. The contract emphasizes precision, accountability, and regulatory compliance over cost alone, reflecting the non-negotiable nature of component performance in national defense systems.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 484220
New
DIBBS
Transportation & Shipment Reporting (First Destination)The contract requires the arrangement and accurate reporting of transportation for O-rings to designated delivery points under FOB Origin terms, ensuring full compliance with the Vendor Shipment Module system. All logistics must be managed and documented to meet a strict 150-day deadline, with responsibility for shipping, tracking, and reporting falling entirely on the subcontractor. The performance location is specified as Norfolk, Virginia, with the shipment activities governed by the agency’s operational requirements. This is a subcontract under the NAICS code 484220, issued by the Nuclear Reactor Program within the Department of Defense. The solicitation was posted on August 4, 2026, with responses due by August 14, 2026. The contract emphasizes precise shipment reporting through the Vendor Shipment Module and demands full adherence to FOB Origin conditions, meaning the buyer assumes all costs and risks once the goods leave the supplier’s facility. No set-aside provisions apply, and the contractor must ensure seamless coordination to meet the timeline and reporting standards tied to military logistics protocols.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 541380
New
DIBBS
Quality Assurance & Inspection ServicesThe contract requires the performance of quality assurance and inspection services to ensure compliance with zero-defect sampling standards as defined by MIL-STD-1916 or ASQ H1331, covering the verification of critical, major, and minor product attributes at specified inspection levels. The work is tied to the Nuclear Reactor Program under the Department of Defense and is classified as a subcontract, with performance to be conducted at a designated location in Norfolk, Virginia, with a ZIP code of 23511-0001. The solicitation was posted on August 4, 2026, and responses must be submitted by August 14, 2026, with the NAICS code 541380 indicating it falls under engineering services. There is no set-aside designation specified, and the contract is open for bid through the DIBBS system via the provided link.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling & Preservation ServicesThe contract requires military-compliant packaging, labeling, and preservation services for O-rings in accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring all materials used are non-ozone-depleting. The work must meet strict Department of Defense specifications for handling, marking, and protecting critical components used in sensitive applications, with packaging designed to maintain integrity through storage and transport. Compliance with these military standards is mandatory, and all processes must align with current environmental regulations governing material use. The contract is a subcontract under the Nuclear Reactor Program within the Department of Defense, with performance located in Norfolk, Virginia, 23511-0001. The solicitation was posted on August 4, 2026, and responses are due by August 14, 2026. The NAICS code 561910 categorizes the work under Other Support Activities for Transportation, indicating it involves specialized logistics and handling services. The opportunity is not subject to any set-aside provisions, and submissions must be made through the DIBBS platform via the provided link to meet participation requirements.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 541620
New
DIBBS
Environmental & Material Compliance ManagementThe contract requires strict adherence to environmental regulations governing the use of mercury and ozone-depleting substances in all materials and packaging, demanding full compliance with NAVSEA 5100-003D standards. This includes providing detailed documentation for all components and packaging materials, as well as formal justification for any exceptions that may arise, ensuring that no restricted substances are introduced without authorized approval. The focus is on maintaining environmental integrity throughout the supply chain and verifying that all deliverables meet federal mandates for hazardous substance control. Performance is tied to the location of Norfolk, Virginia, with the contract classified under NAICS code 541620 for environmental consulting services and structured as a subcontract within the Department of Defense’s Nuclear Reactor Program. Responses must be submitted by August 14, 2026, with the solicitation originally posted on August 4, 2026. The requirement emphasizes proactive environmental stewardship, rigorous recordkeeping, and transparent compliance processes to support defense operations while safeguarding regulatory and ecological standards.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332996
New
DIBBS
High-Reliability O-Ring Manufacturing & SupplyThe contract requires the manufacture and supply of high-reliability O-rings designed for use in nuclear reactor applications, with strict compliance to SAE AS3209C and AMS7276J specifications. These components must meet zero-defect quality standards, ensuring exceptional performance under extreme conditions, and must fully adhere to DFARS requirements for domestic sourcing and supply chain integrity. The deliverables are critical to mission-critical nuclear systems, demanding rigorous materials certification, traceability, and manufacturing controls throughout the production process. The contract is classified as a subcontract under NAICS code 332996 and is managed by the Nuclear Reactor Program under the Department of Defense. Performance is required at the specified location in Norfolk, Virginia, with a response deadline of August 14, 2026. The solicitation is openly available through the DIBBS portal, and all bidders must demonstrate proven capability in producing precision elastomeric seals for defense and nuclear environments. No set-aside provisions apply, and the award will be based on technical compliance, quality assurance protocols, and demonstrated experience with high-reliability seal systems.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details