Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CLAMP SUBASSEMBLY, MUZZ

Active
SPE7L7-26-Q-2060Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 15 units of the Clamp Subassembly Muzzle, identified by NSN 1005-01-047-3296, under solicitation SPE7L7-26-Q-2060, with a delivery requirement of 418 days after contract award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is classified as a Category I Munitions List component, requiring demilitarization per DODM 4160.28-Vol.3, and is subject to strict export controls under ITAR or EAR, prohibiting unauthorized disclosure or transfer to foreign persons, whether domestically or abroad. Contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD training on export-controlled technical data, and receive formal approval from DLA to access controlled information. Cybersecurity compliance mandates CMMC Level 2 certification, either through self-assessment or third-party assessment by an accredited C3PAO. Manufacturing and quality standards include tailored higher-level contract quality requirements, configuration change management protocols, and adherence to Qualified Products Lists or Qualified Manufacturers Lists where applicable. Packaging must comply with DLA specifications, and inspection and acceptance occur at the supplier’s origin. Bare item marking is required per RQ017, though Unique Item Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). Government identification must be removed from non-accepted supplies, and all technical data associated with the item remains under strict control as defined by DFARS 252.225-7048.

General Info

Procure 15 Clamp Subassembly Muzzle units, DLA contract, ITAR/EAR controlled, CMMC Level 2, US/Canada certified, demilitarize per DODM 4160.28-Vol.3.

Agency

Department Of Defense → DEPOT HILLView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD BLDG 849W, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

SPE7L7-26-Q-2060.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DEPOT HILL
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DEPOT HILL
View Agency Profile
Office AddressUS
Contacts
Charles Duncan
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLAMP, SUBASSEMBLY MUZZLE.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES
(CATEGORY I MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the
SPE7L7-26-Q-2060
SECTION B
SUPPLY/SERVICE: 1005-01-047-3296 CONT'D
Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1005-01-047-3296 Quantity: 15 EA Purchase Request: 7017236356QTY: 15 Delivery: 418 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332994
New
DIBBS
STOP, DEPRESSION FIRINGThe contract pertains to the procurement of nine units of a STOP ASSEMBLY, DEPRESSION item with NSN 1005-01-518-3791 under solicitation SPE7L1-26-T-869J, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within 168 days after contract award, and the solicitation response deadline is August 3, 2026. The item is classified as a Category I munition under DoDM 4160.28-Vol.3, mandating specific demilitarization procedures upon disposal. Technical data associated with the item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed training on handling DoD export-controlled technical data, and formal DLA authorization. The contract enforces rigorous quality and cybersecurity standards, including CMMC Level 2 certification for third-party assessors and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Configuration changes require formal Engineering Change Proposal review and variance approval. Inspection and acceptance must occur at the origin, and unauthorized government identification must be removed from non-accepted supplies. Packaging must adhere to DLA procurement standards, and all technical or quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The place of performance is New Cumberland, PA, with Miguel Acevedo designated as the primary point of contact for inquiries.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
BAG, EMPTY CARTRIDGEThe contract pertains to the procurement of 26 units of BAG, EMPTY CARTRIDGE with NSN 1005-01-613-6153, issued under solicitation SPE7L1-26-T-870Q by the Department of Defense’s Land Supply Chain. Delivery is required within 189 days from award, with responses due by August 3, 2026. The item is subject to stringent technical and quality requirements mandated by the DLA Master List, including configuration control through engineering change proposals, inspection and acceptance at origin, and removal of government identification from non-accepted supplies. The contractor must comply with DLA packaging standards and ensure compliance with qualified products and manufacturers lists for any components governed by specification-specific QPL/QML requirements. The technical data associated with this item is controlled under ITAR or EAR, requiring prior export authorization and restricting access to only those contractors certified under the US/Canada Joint Certification Program, having completed mandatory DLA export control training, and approved by DLA oversight. Additionally, the contractor must hold CMMC Level 2 certification as a third-party assessment organization and adhere to all applicable cybersecurity and defense information protection protocols. The delivery location is Texarkana, Texas, and the NAICS code reflects manufacturing activity in a specialized industrial category.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
HARNESS, W14This contract is for the procurement of eight units of the HARNESS, W14, identified by NSN 1005-01-566-1820, under solicitation SPE7L4-26-T-5746, awarded to BAE SYSTEMS LAND & ARMAMENTS L.P. with part number TYUH10014A. Delivery is required within 168 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and a strict zero variance allowance on quantity. The item must be packaged and marked in full compliance with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods and no special marking. All packaging must adhere to DLA Packaging Requirements, and palletization must follow referenced standards. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lights, sensors, weapon systems, or chemically specified reagents, with portable devices containing mercury requiring shockproof design and secondary containment per NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced through the DLA Master List, and requires compliance with CMMC Level 2 Self-Assessment for cybersecurity. Demilitarization instructions apply as this item falls under Category I munitions, and government identification must be removed from non-accepted supplies. Transportation and freight handling protocols are governed by DLAD Proc Notes C19 and C20. The item is classified as a critical application item, and all deliveries must meet Destination Inspection and Acceptance Points. The solicitation was issued on July 23, 2026, with a response deadline of August 3, 2026, and is managed by the Department of Defense’s Combat Vehicles and Armament office, with Anna-Rachelle Betts as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
CRADLE ASSEMBLYThe Cradle Assembly is a critical gun part subject to stringent defense and export controls under the International Traffic in Arms Regulations and the Arms Export Control Act, requiring all manufacturers or exporters to register with the Directorate of Defense Trade Controls, with proof of registration mandatory for award eligibility. This item is classified as a defense article and includes technical data governed by ITAR or EAR, restricting its export and disclosure to foreign persons, including employees of foreign subsidiaries, even within the United States. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export-controlled data training, and DLA authorization may access the controlled technical data. The product must be manufactured by a qualified facility identified in the contract, with any change requiring formal contract modification, and inspection is to be conducted by the Quality Assurance Representative at the manufacturer’s facility. The contract mandates conformance with DLA’s master list of technical and quality requirements, including tailored higher-level quality requirements for manufacturers and non-manufacturers, and adherence to specific packaging standards. The item is associated with a Qualified Products List or Qualified Manufacturers List, requiring all components to be sourced from approved suppliers. Product Verification Testing may be triggered before each shipment, requiring five samples per contractor to be provided, one of which may be destroyed, and all samples must be properly identified, packaged, and marked. Configuration changes require formal Engineering Change Proposal or variance requests. The cradle assembly must be delivered within 168 days to New Cumberland, Pennsylvania, with a single unit quantity ordered under solicitation SPE7L3-26-T-129N. Unauthorized removal of government identification from non-accepted supplies is prohibited, and the contractor must comply with demilitarization requirements for Category I munitions items as outlined in DoDM 4160.28-Vol. 3.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
ROD SECTION, CLEANING, SThe contract pertains to the procurement of rod sections for cleaning small arms, specifically for use on Barrett Firearms .50 cal XM107 rifles, identified by NSN 1005015025842 and part number IP-9098-5. The quantity is estimated at 54 units with a guaranteed minimum of 8 units under an indefinite-delivery, indefinite-quantity (IDIQ) contract framework. Delivery is required within 69 days FOB Origin within the Continental United States, and the contract ceiling value is set at $350,000. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede general standards such as ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 for marking, bar-coding, and hazardous material identification, with palletization following RP001 DLA Packaging Requirements. The unit of issue is each (EA), and the quantity per unit pack is specified as 001. The contract incorporates multiple Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses addressing compliance with employment equity, trafficking in persons, sustainable products, hazardous materials handling, cybersecurity safeguards, subcontracting, inspection at destination, and prohibition of hexavalent chromium. It mandates adherence to the Hazard Communication Standard and requires compliance with NIST SP 800-171 for safeguarding covered defense information. Offerors must provide a Unique Entity Identifier (UEI) and disclose size status and socioeconomic certifications, including small business or veteran-owned status. Proposals must be submitted electronically via the DLA-BSM Internet Bid Board System by July 28, 2026. Payment processing is mandated through Wide Area WorkFlow, and all deliveries are restricted to CONUS locations under DLA Direct. Technical specifications referenced by R and I numbers are controlled by the most current revision of the DLA Master List in effect on the solicitation issue date. Government inspection and acceptance occur at the destination, and the contractor is responsible for ensuring full regulatory compliance with no tolerance for variation in quantity.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332994
New
DIBBS
GAS PORT, BOLT
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
DIVERTER-MUZZLE
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
INTERVALOMETER, ROCK
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
UH-1Y RH BRACKET AS
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
DRIVE ASSEMBLY, ELEC
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
MOUNT, RESILIENT, WThe contract pertains to the procurement of a resilient weapon system mount, identified by part number B4582-1 and NSN 5342012658297, with a required quantity of 97 units to be delivered within 120 days from the contract date. Delivery is FOB origin, with inspection and acceptance also occurring at the manufacturer's location, and no variance in quantity is permitted. The item is classified as a Critical Application Item with a non-extendable Type I shelf life of 36 months, requiring special marking code 32 to denote this requirement. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including MIL-STD-129 for labeling, and palletization must meet RP001 requirements. The contractor must adhere to stringent quality assurance provisions, including ISO 9001:2015 for non-tailored higher-level quality, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise stated. All technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements. Measuring and test equipment must be calibrated and documented, and government identification must be removed from non-accepted items. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD procedural notes C19 and C20. The solicitation number is SPE4A7-26-T-575H, with a response deadline of July 23, 2026, and the contract falls under NAICS code 332994 for other fabricated metal product manufacturing.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332994
New
DIBBS
PAWL, AMMUNITION FEED
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → DEPOT HILL

Same awarding agency

NAICS: 332216
New
DIBBS
TIP, SUCTION DEVICE, DESThis contract specifies the procurement of a desoldering suction device, identified by NSN 3439-01-376-8040 and part number 1121-0317, with a quantity of 47 units. The item is classified as critical due to its dimensional requirements and is subject to stringent packaging and quality standards including MIL-STD-2073-1E and MIL-STD-129 for marking and packaging, with all packaging compliant with ASTM-D-3951 and DLA’s procurement requirements. The supplier must ensure no intentional addition or direct contact of mercury or mercury-containing compounds, except for approved applications such as functional batteries, fluorescent lamps, sensors, or weapon systems, with portable devices containing mercury required to have shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. Delivery is FOB origin with zero variance allowed in quantity, inspection and acceptance occurring at destination, and the required delivery date is December 17, 2026, with a 167-day lead time. Packaging must be palletized per DLA guidelines and marked with no special marking code. The contract is issued under solicitation SPE8E6-26-T-3860, with the point of contact being Brett Scull, and the delivery address is DLA Distribution Depot Hill at Hill Air Force Base, Utah. Payment is set at $47.00 per unit, totaling $2,209. The item is sourced from approved vendors including PEK 3 Electronic GmbH, Pace Europe Limited, and Pace Incorporated.
Saw Blade and Handtool Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECKThe contract pertains to the procurement of a check valve, NSN 4820-00-397-9530, for delivery to Hill AFB under solicitation SPE7MC-26-T-146E, with a total quantity of 70 units required and a delivery deadline of 172 days after award. Each valve must be an approved source and accompanied by an acceptance test report upon delivery, while new suppliers must first complete and submit a qualification test report per drawing D695620. The certificate of conformance is prohibited unless specifically approved by the ESA. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by acquisition type and solicitation amendments. The item is subject to stringent configuration change management protocols, export control under ITAR or EAR, and requires strict adherence to DFARS 252.225-7048, including restrictions on access to technical data by foreign nationals and subsidiaries. Only contractors with valid US/Canada Joint Certification Program status, completed DLA export training, and approved access authorization may handle the controlled technical data. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The vendor must be CMMC Level 2 certified as a C3PAO and handle covered defense information per applicable directives.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, LINEAR, DIRECT
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
DIBBS
COCK, DRAIN
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 323111
New
DIBBS
Specialized Packaging, Marking, and Labeling Services
Commercial Printing (except Screen and Books)

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 488510
New
DIBBS
Domestic & International Logistics with U.S.-Flag Vessel Compliance
Freight Transportation Arrangement

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Controlled Unclassified Information (CUI)
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 562910
New
DIBBS
Radioactive Materials Handling & Reporting
Remediation Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) Management
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
O-Ring Manufacturing and Supply for ICBM SystemsThe contract requires the manufacture and delivery of 100 precision O-rings compliant with military drawing TD102475 ST0500 Type 1A Method 41 and identified by NSN 5331-00-881-0296, specifically for use in Intercontinental Ballistic Missile systems. Each unit must meet exacting technical specifications to ensure mission-critical performance, and the supplier is obligated to conduct First Article Testing to validate conformance before full production. The O-rings must be packaged and labeled in accordance with all applicable military standards to maintain traceability, integrity, and readiness for deployment. The opportunity is issued as a subcontract under the Department of Defense, with the contracting office listed as DEPOT HILL and the place of performance designated as Hill Air Force Base, Utah, 84056-5734. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, and falls under NAICS code 332999 for other fabricated metal product manufacturing. All proposals must be submitted through the designated DIBBS platform, and the supplier must demonstrate capability to meet stringent defense sector requirements, including quality assurance, regulatory compliance, and secure handling procedures for national defense applications.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 339950
New
DIBBS
Identification Plate Manufacturing and Compliance PackagingThe contract requires the manufacture of exactly 21 military identification plates aligned with NSN specifications, ensuring full adherence to all technical and procedural standards mandated by the Department of Defense. Each plate must be produced to exacting military quality benchmarks and accompanied by proper labeling in compliance with MIL-STD-129, which governs uniform marking for military shipments. The packaging must meet ASTM D3951 standards for protective packaging of military material, and the entire shipment must be palletized following DLA RP001 guidelines to ensure standardized handling and logistics compatibility across defense supply chains. The procurement is issued as a subcontract under NAICS code 339950, indicating it involves other fabricated metal product manufacturing. It is being managed by DEPOT HILL, a Department of Defense entity, with performance required at Hill Air Force Base, Utah, under the zip code 84056-5734. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026. The contract does not specify a set-aside classification, and while no point of contact is listed, all submissions must be made through the designated DIBBS portal linked in the documentation.
Sign Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details