Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CLAMP, TOGGLE, HAND

Active
SPE8E5-26-T-3657Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 26 units of CLAMP, TOGGLE, HAND with NSN 3444-01-549-4726 under solicitation SPE8E5-26-T-3657, issued by the Department of Defense through the DDSP New Cumberland Facility. Each unit is priced at $26.00 for a total contract value of $676.00, with delivery required within 167 days of award, FOB origin, and inspection and acceptance occurring at the destination. All items must be packaged in strict compliance with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s RP001 Packaging Requirements, and packaging must reflect the specified Unit of Issue and Quantity per Unit Pack. The DLA Master List of Technical and Quality Requirements supersedes all other standards, and government identification must be removed from non-accepted supplies. The delivery address is the DDSP New Cumberland Facility in Pennsylvania, and transportation follows DLA procedural notes C19 and C20. The original required delivery date was January 5, 2027, with a need ship date of January 18, 2027. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and is classified under NAICS code 332216. The primary point of contact is Ira Hedgepeth, reachable via provided phone and email.

General Info

Procurement of 26 toggle clamps at $26 each, total $676, delivery to New Cumberland by January 2027, complying with DLA and military packaging standards.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332216 - Saw Blade and Handtool ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E5-26-T-3657.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Ira Hedgepeth
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLAMP,TOGGLE,HAND
CLAMP,TOGGLE,HAND
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
JCB INC. 0JKF0 P/N 347/21114
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017585074 0001 EA 26.000
NSN/MATERIAL:3444015494726
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
SPE8E5-26-T-3657
SECTION B
PR: 7017585074 PRLI: 0001 CONT’D
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/18/2027 Original Required Delivery Date:01/05/2027
SPE8E5-26-T-3657 NSN/Part Number: 3444-01-549-4726 Quantity: 26 EA Purchase Request: 7017585074QTY: 26 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332216
New
DIBBS
TIP, SUCTION DEVICE, DESThe contract pertains to the procurement of 32 units of a desoldering suction device tip and an electric solder tip, identified by NSN 3439-01-353-4370, under solicitation SPE8E6-26-T-3794. Delivery is required within 52 days after order placement, and responses must be submitted by August 3, 2026. The procurement is fully competitive and governed by military and federal specifications, with all technical and quality requirements referenced through DLA’s Master List of Technical and Quality Requirements, accessible via the designated website. The contract incorporates applicable defense information protocols and mandates strict compliance with packaging and handling standards, including the prohibition of intentional addition or direct contact of mercury or mercury-containing compounds with supplied hardware, except for specific exemptions such as functional mercury in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents. Portable devices containing mercury must be shockproof and feature a secondary containment barrier in accordance with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and all work is to be performed at the New Cumberland, Pennsylvania location under the oversight of the Department of Defense’s DDSP New Cumberland Facility, with Christopher Barraro listed as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
TIP, SUCTION DEVICE, DESThe contract specifies the procurement of 61 units of a desoldering suction device tip with NSN 3439-01-376-8043 under solicitation SPE8E6-26-T-3806, requiring delivery within 167 days to the DLA Distribution facility in New Cumberland, Pennsylvania. All items must be shipped FOB origin with zero variance allowed in quantity and inspected and accepted at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, prioritizing specifications over ASTM D3951, and must conform to MIL-STD-129 for labeling and identification. If the item is classified as hazardous under Fed-Std-313, it must be packaged per TQ requirement IP025; otherwise, commercial packaging per SPE8E6-26-T-3806 is required. Palletization must adhere to RP001, and all packaging must be properly marked and labeled. The delivery must be completed by January 18, 2027, with an original required date of January 4, 2027. Transportation details are governed by DLAD Proc Note C19 for general shipment and C20 for first destination, with point of contact Brett Scull available for inquiries. The item is classified under NAICS code 332216 and is being sourced under a federal acquisition process.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
SOLDERING IRON, ELECTRIThe contract is for the procurement of 41 electric soldering irons under NSN 3439-01-399-4906, with a total value of $1,681.00 at $41.00 per unit, issued under solicitation SPE8E9-26-T-3210 as a Women-Owned Small Business Set-Aside. Delivery is required within 167 days FOB origin to Robins Air Force Base, Georgia, with zero variance allowed in quantity and inspection and acceptance occurring at the destination. The item must comply with DLA packaging standards, specifically MIL-STD-2073-1E, and be marked according to MIL-STD-129 with no special marking required. Packaging must also adhere to RP001 requirements and be palletized as specified, with no hazardous materials permitted except for functional mercury in batteries, fluorescent lights, sensors, controls, weapon systems, or NAVSEA-specified reagents, all of which must include secondary containment for safety. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise stated, and all attributes not otherwise classified are treated as major. Technical and quality requirements are governed by the DLA Master List, and mercury-containing portable lamps and instruments must be shockproof with secondary containment per NAVSEA 5100-003D. The contract prohibits intentional addition of mercury to any hardware or supply, and the seller must comply with all applicable defense information handling requirements under RD003. The solicitation closed August 3, 2026, with the award expected to be made shortly thereafter, and performance is scheduled to begin by January 18, 2027.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
TOOL SET BRIDGE REMThe contract pertains to the procurement of a Tool Set Bridge REM identified by NSN 5210-01-583-1759, with a single unit quantity required under Purchase Request 7017585150. Delivery is due within 167 days from the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. The item must comply with strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including MIL-STD-130 for Item Unique Identification (IUID) and DFARS 252.211-7003, which mandates permanent marking and tracking of the item. Packaging must adhere to ASTM D3951 unless overridden by higher-priority DLA standards, and all labels and markings must follow MIL-STD-129, with palletization conforming to DLA Packaging Requirements RP001. The delivery address is the DLA Distribution facility at DDSP New Cumberland, Pennsylvania, and transportation procedures are governed by DLAD Proc Notes C19 and C20. The original required delivery date is June 8, 2027, with a needed ship date of January 18, 2027, under solicitation SPE8E5-26-T-3663, issued on July 22, 2026, with responses due by August 3, 2026. The contract is classified under NAICS code 332216 and is managed by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Khue Nguyen available for inquiries.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
WRENCH, TORQUEThe contract pertains to a single torque wrench, identified by NSN 5120-01-657-6366 and part number 6302958-5, with a quantity of one unit to be delivered within five days under FOB origin terms. All items must comply with DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, wrapping, and labeling requirements in accordance with MIL-STD-129, with no special marking needed. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. Technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List, and revisions in effect on the solicitation or award date govern compliance. Delivery is to DZ İKMAL MERKEZİ KOMUTANLIĞI in Derince, İzmit, Turkey, with freight handled through the specified forwarder at NUWC Newport. The item is part of project NPT TP 1 and must be delivered no later than July 23, 2026, with no variance permitted in quantity. The solicitation number is SPE4A6-26-T-08GZ, issued under a federal procurement framework managed by the Department of Defense, with Erin Edwards listed as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
REMOVER, BEARING AND BUThe contract specifies the procurement of a remover, bearing, and bushing with NSN 5120-01-714-8167 and part number AID-00212 in a quantity of 21 units, to be delivered FOB origin within 347 days of contract award with no variance allowed in quantity. All items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including ISO 9001:2015 for manufacturers and non-manufacturers, and must meet MIL-STD-2073-1E packaging requirements with marking per MIL-STD-129 and palletization per DLA packaging guidelines. Sampling for inspection follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be verified at designated levels. Item Unique Identification is not required as per the Service customer’s direction, and government identification must be removed from non-accepted supplies. The contract includes cybersecurity compliance under CMMC Level 2 self-assessment and applies to covered defense information. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of July 12, 2027. The solicitation, issued under SPE4A5-26-T-303R, was posted on July 21, 2026, with responses due by July 29, 2026, and the winning suppliers include HABCO Industries LLC, Kell-Strom Tool International, Inc., and Hamilton Sundstrand Corporation.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
FILE, HANDThe contract specifies the procurement of 200 dozen hand files under NSN 5110-00-242-5384, with delivery required within 100 days after award. Each file must meet stringent technical specifications including a bastard cut, American pattern, 8-inch length with tolerances of ±1/8 inch, and exact dimensions for width and thickness. The files must be made of carbon alloy steel, tapered in width and slightly in thickness toward the point, with a conventional tang for wood handle attachment, and tempered to no more than 45 Rockwell C hardness. Teeth must be uniformly chisel-cut or etched, sharp, free of defects or decarburization, and hardened across the cutting surface with 43 to 46 teeth per inch on the flats and 42 to 48 on the edges. The product must conform to the producer’s own commercial standards and be identical to items sold in the open market, with each unit permanently marked with the country of manufacture via engraving, etching, or permanent ink. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using recycled fiberboard and dunnage as mandated by EPA guidelines, and must be palletized according to DLA Packaging Requirements RP001. Items are to be shipped FOB origin with inspection and acceptance occurring at destination, and pricing is firm fixed without variance tolerance. All packaging and marking adheres to standardized codes and must include the special requirement code ZZ. The contract references DLA’s Master List of Technical and Quality Requirements and incorporates specifications from the USDA Forest Service. Delivery is directed to DLA Distribution San Joaquin in Tracy, California, with the solicitation issued under SPE8E5-26-Q-0350 and response due by July 27, 2026.
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 332216
New
DIBBS
CALIPER, DIGITAL DIS
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
WRENCH, TORQUEThe contract is for a single torque wrench with NSN 5120-01-548-6277 under solicitation SPE4A6-26-T-08YG, with a required delivery within five days of award. The item is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect at the time of solicitation or award. The contractor must adhere to DLA packaging specifications and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Cybersecurity requirements mandate certification at CMMC Level 2 by a certified third-party assessment organization. The technical data associated with this item is controlled under ITAR or EAR, restricting any export or disclosure to foreign persons without prior authorization, and access is limited to contractors approved under the US/Canada Joint Certification Program who have completed mandatory DLA export control training and questionnaires. Physical identification and bare item marking are required, and any non-accepted supplies must have government identification removed. The contracting activity is the Department of Defense’s ASC Commodities Division, with Mellisa Heise as the primary point of contact, and responses must be submitted by July 29, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
FILE SET, RIFFLERThe contract pertains to the procurement of one unit of a FILE SET, RIFFLER with NSN 5180-01-073-8197, under solicitation SPE4A7-26-T-589N. Delivery is required within 345 days of the award, with a firm delivery date of October 14, 2026, and a need ship date of July 10, 2027. The item must be delivered FOB origin with no variance in quantity allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit containers, and packaging codes, while marking follows MIL-STD-129 with no special markings required. Palletization and packaging adhere to DLA’s standardized procurement requirements, and the final destination is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract specifies zero defect acceptance under sampling procedures governed by MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned strict verification levels or AQLs. Item identification does not require unique identification per customer request, and technical and quality standards are referenced from the DLA Master List. The unit of issue is each, priced at $1.00, with total contract value of $1.00. The procurement is under N-AICS code 332216 and managed by the Department of Defense, with James Stearns as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
CROWFOOT WRENCH ATTACHThe contract covers the procurement of two Crowfoot Wrench Attachments, Socket Head, identified by NSN 5120-01-508-3321 and manufacturer part number 106672 from B M F Torque Wrench Company DBA 0SJL5. The item is designated as a critical application component and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, incorporated by reference under R and I numbers. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special marking code. The item is subject to strict mercury restrictions, prohibiting intentional addition or direct contact with mercury or mercury-containing compounds except in specified exceptions such as batteries, fluorescent lights, sensors, controls, weapon systems, and chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. Sampling and inspection procedures require compliance with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with zero non-conformances required unless otherwise stipulated. Attributes are to be categorized as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are treated as major. The contract specifies a delivery timeline of 171 days, with delivery to be made FOB origin under a 0% quantity variance, and inspection and acceptance to occur at the destination. The shipping address is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required ship date is January 17, 2027, with an original delivery deadline of March 23, 2027. The solicitation number is SPE4A6-26-T-08EB, issued by the Department of Defense’s ASC Commodities Division, with Alexander Sotos as the primary point of contact. All units of issue are governed by ANSI X12 standards as defined in DLA’s official documentation.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
INSERTER, SEALThe contract pertains to the supply of three inserter, seal units identified by NSN 5120-01-689-7840, with a delivery requirement of 20 days after contract award. The solicitation, numbered SPE4A6-26-T-08RA, was posted on July 21, 2026, and responses are due by July 29, 2026. It falls under NAICS code 332216 and is managed by the ASC Commodities Division of the Department of Defense. The place of performance is Yorktown, Virginia, with Bernice Adams designated as the primary point of contact. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date, depending on acquisition size. The item includes technical data subject to export control under ITAR or EAR, necessitating strict adherence to DFARS 252.225-7048 and prohibiting unauthorized disclosure to foreign persons, including foreign nationals employed by U.S. entities. Access to this data is restricted to contractors with approved JCP certification, completed DOD export control training, and formal authorization from DLA. Packaging must conform to DLA requirements. The contractor must also maintain CMMC Level 2 certification as a third-party assessment organization.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332313
New
DIBBS
DECONTAMINATION SUBThis contract pertains to the procurement of a decontamination subsystem for personnel, identified by part number H-807S and NSN 4230-01-606-7328, with a quantity of twelve units to be delivered FOB origin within 105 days. The item is classified as a commercial item and must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s packaging requirements. No asbestos as defined by FED-STD-313 is permitted, and mercury or mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lights, certain instruments, weapon systems, or chemical reagents approved by NAVSEA; in those cases, portable devices must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Documentation for source approval is required, and government identification must be removed from any non-accepted supplies. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is November 17, 2026, with an original delivery target of January 25, 2027. Transportation logistics are governed by DLAD procedural notes C19 and C20, and all units of issue follow DoD standards as referenced in the official DLA unit of issue file.
Plate Work Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThe contract specifies the procurement of two power supply units identified by NSN 6130-01-461-4359 and part number AW50S/28-A-ER, supplied by SURE POWER, INC, under solicitation SPE7L7-26-T-4402. Delivery is required within 182 days from the contract date, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container specifications, with marking adhering to MIL-STD-129 and palletization following DLA’s packaging requirements. The power supplies must not contain intentional additions of mercury or mercury compounds, except in permitted exceptions such as batteries, fluorescent lighting, sensors, and weapon systems specified by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof design and secondary containment. Sampling for quality verification follows MIL-STD-1916 or comparable zero-based inspection plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless otherwise stated. The item is to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, and the original required delivery date was October 14, 2026, with a revised need date of February 2, 2027. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on contract type and amendment dates.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
COLLECTOR, DUSTThe contract pertains to the procurement of a DUST COLLECTOR under solicitation SPE8E8-26-T-4793, with a unit of issue of each (EA) and a total quantity of 18 units. The item is identified by NSN 4460-01-423-6533 and has a unit price of $18.00, resulting in a total price of $324. Delivery is required within 167 days from the contract award, with delivery terms set to FOB origin. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, and marked according to MIL-STD-129 with no special marking required. Palletization must adhere to DLA’s packaging requirements, and the final destination is the DDSP New Cumberland Facility in Pennsylvania. The contract enforces stringent material restrictions, prohibiting the intentional addition of mercury or mercury-containing compounds in or in direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The procurement is governed by technical and quality standards referenced from the DLA Master List, with revisions determined based on solicitation and award timelines. Inspection and acceptance occur at the destination. The delivery deadline is January 18, 2027, originally required for September 8, 2026. All transportation logistics are directed per DLAD Proc Notes C19 and C20, and point of contact for inquiries is Alexis Selby at the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
VALVE, CONTROLThis contract specifies the procurement of a control valve identified by NSN 4410008629398 and part number 020360DU from Clyde Bergemann Inc, with a quantity of five units to be delivered FOB origin within 167 days. The item is classified as a critical application component, and all supplies must strictly comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including packaging, marking per MIL-STD-129, and palletization standards. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. The contract includes no variance in quantity, with inspection and acceptance occurring at the destination, and requires adherence to DLA’s technical and quality standards referenced from the DLA Master List. Delivery is to be made to the DDSP New Cumberland Facility in Pennsylvania, with a required ship date of January 18, 2027, and the solicitation was issued as a Women-Owned Small Business Set-Aside under NAICS code 332410 with a response deadline of August 3, 2026.
Power Boiler and Heat Exchanger Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326191
New
DIBBS
PLUMBING SUB-ASSYThe contract is for the procurement of a plumbing sub-assembly identified by NSN 4510-01-601-1511, with a quantity of 28 units, under purchase request 7017585193. Delivery is required within 167 days after award, and the solicitation number is SPE8E8-26-T-4824, with a response deadline of August 3, 2026. The solicitation was posted on July 22, 2026, and is managed by the DLA New Cumberland Facility under the Department of Defense. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, accessible via the specified DLA website, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to removal of government identification if not accepted. The NAICS code is 326191, and the place of performance is New Cumberland, Pennsylvania, with Alexis Selby listed as the primary point of contact via email and phone.
Plastics Plumbing Fixture Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
BOILERThe contract pertains to the procurement of a single boiler unit identified by NSN 4410-01-667-3882 and part number 61301608364, supplied by GETINGE USA SALES, LLC and GETINGE USA INC, under solicitation SPE8E8-26-T-4805. The requirement is part of a total small business set-aside under NAICS code 332410, with delivery due in 167 days from the contract award, targeting a ship date of January 18, 2027, and an original delivery deadline of December 31, 2026. The item is to be delivered FOB origin with zero variance in quantity, inspected and accepted at destination, and must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Packaging must be palletized per DLA requirements, using specified methods and materials, and shipped to the DLA Distribution facility at New Cumberland, PA. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions controlled by the solicitation or award date depending on acquisition size. Documentation for source approval, removal of government identification from non-accepted items, and covered defense information protocols also apply. The point of contact for the contract is Alexis Selby, reachable via email and phone provided.
Power Boiler and Heat Exchanger Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEETThe contract involves the procurement of four units of plastic sheet identified by NSN 9330-01-550-5779 under solicitation SPE8E5-26-T-3658, with a delivery requirement of 167 days after award. The sourcing is governed by DLA packaging and technical quality requirements referenced through R and I numbers, which are defined in the DLA Master List of Technical and Quality Requirements accessible online. Compliance with these requirements is mandatory, and the applicable revision of the master list depends on whether the acquisition is simplified or large, with the relevant date being either the solicitation issue date, award date, or amendment date if modified. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied items, except in specific exempted cases such as batteries, fluorescent lights, designated instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier, in accordance with NAVSEA 5100-003D. The place of performance is New Cumberland, Pennsylvania, with the contract managed by the Defense Logistics Agency’s New Cumberland Facility under the Department of Defense. The point of contact is Don Trachtman, reachable via email and phone listed. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026.
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 444180
New
DIBBS
FOUNTAIN, EYE AND FACEThe contract is for the procurement of 260 portable, self-contained eye and face wash stations manufactured by Bradley Corporation, part number S19-921, meeting ANSI Z358.1 standards. Each unit features gravity flow, an 8-ounce bottle of water preservative, and is designed to deliver a 15-minute flush with a 7-gallon capacity. The equipment must be counter or wall mounted and comply strictly with DLA packaging, marking, and shipping requirements under MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Mercury or mercury-containing compounds are prohibited from direct contact with the hardware except under specific exceptions for functional components like batteries or sensors, with additional containment rules for portable devices per NAVSEA 5100-003D. The product is identified by NSN 4240-01-234-1796, and delivery is required FOB origin within 28 days to the DDSP New Cumberland Facility in Pennsylvania, with a required ship date of April 24, 2026. The contract is subject to DLA’s Master List of Technical and Quality Requirements, and the solicitation is a total small business set-aside under NAICS code 444180, issued under contract number SPE8E6-26-T-3792 with a response deadline of August 3, 2026.
Other Building Material Dealers

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
COMPENSATOR, BUOYANCThe contract specifies the procurement of 33 units of the COMPENSATOR, BUOYANC with NSN 4220-01-524-8491 and part number RANGER BC/M from ZEAGLE SYSTEMS INC, issued under solicitation SPE8E6-26-T-3791. Delivery is required within 167 days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and palletization requirements per RP001, with each unit packaged in accordance with the specified unit of issue and quantity per unit pack. Final delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 18, 2027, following an original required delivery date of September 12, 2026. Transportation logistics are governed by DLAD Proc Notes C19 and C20, and the item is subject to potential Covered Defense Information protocols under RD003. All technical, quality, and packaging specifications referenced take precedence over general industry standards.
All Other Rubber Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332618
New
DIBBS
WIRE FABRICContract SPE8E4-26-T-1908 specifies the procurement of 10 rolls of steel welded wire fabric, each roll measuring 60 inches wide and 150 feet long, with a square mesh of 6 inches by 6 inches and filament size of 0.1920 inches, featuring unfinished edges. The product must comply with ASTM A1064/A1064M Revision dated April 15, 2024, and is subject to technical and quality requirements from the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over all other standards including ASTM D3951. Each shipment requires a Certificate of Quality Compliance or Mill-Material Certification, with copies provided to both the recipient and the DLA Troop Support Contracting Officer. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are verified at specified levels. Packaging must conform to MIL-STD-129 and DLA Packaging Requirements RP001, with palletization and unit packing as defined, while transport and delivery are governed by DLA procedural notes. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with delivery due 167 days after contract award under FOB Origin terms, no quantity variance permitted, and inspection and acceptance occurring at the destination. The purchase request number is 7017585539, with the original required delivery date of February 18, 2027, and a need ship date of January 18, 2027.
Other Fabricated Wire Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
PURIFIER UNIT, AIRThe contract is for the procurement of eight air purifier units, identified by NSN 4460-01-460-6553 and part number 080143 from BAUER COMPRESSORS, INC., under solicitation SPE8E8-26-T-4794. Delivery is required within 151 days of contract award, with shipment originating FOB origin and no tolerance for quantity variance. The units must comply with strict packaging standards per MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping materials, and unit container specifications, and must be palletized according to DLA packaging requirements. Mercury or mercury-containing compounds are strictly prohibited unless part of exempted functional components like batteries or instruments, and any such exempted items must include a secondary containment as specified by NAVSEA 5100-003D. The contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation issue date. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, with a required ship date of January 2, 2027, although the original delivery deadline is September 30, 2026. Inspection and acceptance occur at the destination point, and special marking is not required. Transportation and freight shipping instructions align with DLA Procurement Notes C19 and C20. The contract falls under NAICS code 333413 and is managed by the Department of Defense through the DDSP New Cumberland Facility, with primary point of contact Alexis Selby. All supplies must be free of government identification upon rejection and meet the full scope of defense acquisition regulations regarding controlled information, as this is designated as a critical application item.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
LIGHT, NAVIGATIONAL,The contract pertains to the procurement of 70 units of a navigational light, identified by NSN 6220-01-628-9651 and part number 34000-7 manufactured by GLAMOX AQUA SIGNAL CORPORATION, under solicitation SPE8E7-26-T-3386. Delivery is required within 167 days from the award date, with terms set at FOB origin and no variance allowed in quantity, meaning exactly 70 units must be delivered. Inspection and acceptance occur at the destination, and packaging must comply fully with MIL-STD-2073-1E and MIL-STD-129 for marking, including precise codes for packaging methods, materials, and containers as specified. The item is subject to DLA’s Packaging Requirements for Procurement and Hazmat packaging standards, with shipments directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates technical and quality requirements referenced from the DLA Master List, and all provisions are governed by the version of the master in effect on the solicitation issue date. The original delivery deadline is December 14, 2026, but the needed ship date is set for January 18, 2027, allowing time for processing and logistics. Payment is based on a unit price of $70, resulting in a total contract value of $4,900. The point of contact for inquiries is Kelly Mitchell of the Department of Defense, with all correspondence and compliance governed under DLA procedures and federal acquisition standards.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details