Top

Classified Systems Maintenance and Repair

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → FA2398 Cm Ct Interior Srv Rcn Aflcmc/hbgView Agency

NAICS

811211 - Consumer Electronics Repair and MaintenanceView NAICS

Place of Performance

Salt Lake City, UT, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedNov 25

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → FA2398 Cm Ct Interior Srv Rcn Aflcmc/hbg

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA2398 Cm Ct Interior Srv Rcn Aflcmc/hbg

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Perform OEM-level maintenance, testing, and repair of Secret, TS, and TS/SCI-capable DDSA systems using proprietary test infrastructure and in compliance with NIST cybersecurity standards.

Similar Contracts

Same NAICS industry code

NAICS: 811211

New

International

Emergency Calibration and On-Demand Response ServicesThe contract demands the provision of 24/7 emergency calibration services to respond rapidly to unplanned equipment failures within a GMP-compliant environment, ensuring uninterrupted operations and regulatory adherence. Contractors must be prepared to deploy qualified personnel at any time to recalibrate critical measurement instruments, minimizing downtime and maintaining product quality and process integrity. Service levels require immediate response capabilities, with strict protocols for documentation, traceability, and compliance with GMP standards throughout all calibration activities. The opportunity is structured as a subcontract under the National Research Council of Canada, part of the Government of Canada, with performance obligations located across Canada. The solicitation was posted on August 1, 2026, and responses are due by August 25, 2026, under NAICS code 811211 for industrial and commercial equipment repair and maintenance. Bidders must demonstrate proven experience in regulated environments, capable of meeting stringent response time expectations and maintaining rigorous calibration records acceptable to health and safety authorities. Successful vendors will be expected to integrate seamlessly with existing facility operations and uphold the high standards required for pharmaceutical, biotech, or similar GMP-regulated manufacturing settings.

National Research Council of Canada

POSTED

DEADLINE

Scheduled Calibration Services for Laboratory and Manufacturing InstrumentsThe contract requires the performance of routine, on-site calibration services for 365 scientific and industrial instruments during scheduled shutdown periods to ensure continued compliance with Good Manufacturing Practices and equipment validation standards. All calibration work must be conducted in Canada, with services aligned to operational downtime to minimize disruption to critical laboratory and manufacturing processes. The scope emphasizes precision, regulatory adherence, and timely execution to support ongoing quality assurance protocols in a regulated environment. The solicitation is classified as a subcontract under NAICS code 811211 and is managed by the National Research Council of Canada, operating under the Government of Canada. The opportunity was posted on August 1, 2026, with a response deadline of August 25, 2026. Proposals must demonstrate technical capability, experience with GMP-regulated environments, and the ability to coordinate calibration activities within tight operational windows. No set-aside provisions are specified, and all interested parties are expected to meet the stringent calibration and documentation requirements necessary for federal compliance.

National Research Council of Canada

POSTED

DEADLINE

Long-Term Maintenance and Service SupportThis contract provides long-term maintenance and service support for installed ultra-low temperature freezers, encompassing ongoing preventive maintenance, regular calibration, alarm system verification, and prompt emergency repairs to ensure operational continuity and equipment reliability. Remote diagnostics capabilities are included to facilitate proactive issue identification and reduce downtime, supporting sustained performance over the contract period. The work is designated as a Small Business Set Aside under NAICS code 811211, restricted to small businesses, and falls under a subcontract structure managed by the Department of Commerce, National Institute of Standards and Technology. The solicitation was posted on July 31, 2026, with responses due by August 13, 2026, and performance will be carried out at unspecified locations under the oversight of the agency.

Department Of Commerce Nist

POSTED

DEADLINE

LC System Maintenance (Pumps, Detectors, Column Compartments)The contract entails the maintenance and repair of integrated liquid chromatography components within an LC-MS system, specifically focusing on pumps, detectors, and column compartments. Required services include calibration, leak testing, and routine replacement of consumables to ensure optimal system performance and analytical accuracy. The work is classified under NAICS code 811211 and is designated as a Small Business Set Aside for total award, meaning only small businesses are eligible to compete. Performance is to be carried out in Grand Forks, North Dakota, with a zip code of 58203. The solicitation was posted on July 31, 2026, and responses are due by August 7, 2026, at 9:00 p.m. Eastern Time. The contracting agency is the U.S. Department of Agriculture, specifically the Agricultural Research Service, and the opportunity is structured as a subcontract.

POSTED

DEADLINE

Preventative and Corrective Maintenance Services for Orbitrap Mass SpectrometerThe contract outlines the provision of comprehensive maintenance services for the Thermo Fisher Scientific Orbitrap Exploris 240 Mass Spectrometer, covering annual preventative maintenance, remote technical support, and on-site corrective repairs. These services include calibration, replacement of wear-prone components, and operational qualification to ensure the instrument remains within optimal performance parameters throughout the contract term. All work must be performed in accordance with manufacturer specifications and industry best practices to maintain data integrity and instrument reliability. The solicitation is designated as a Small Business Set Aside under NAICS code 811211, exclusively available to small business concerns, and is being managed by the USDA ARS AFM APD with performance required at the facility located in Grand Forks, North Dakota, 58203. Proposals must be submitted by August 7, 2026, and the contract will be structured as a subcontract under the broader federal agency procurement framework. While no point of contact is listed, interested parties should navigate to the provided SAM.gov link for detailed submission guidelines and requirements.

POSTED

DEADLINE

EV Charging Station Inspection & MaintenanceThis contract involves the inspection, troubleshooting, and repair of electric vehicle charging stations, requiring comprehensive technical expertise in electrical safety assessments, communication system diagnostics, and user interface maintenance. The work demands a skilled technician capable of identifying and resolving hardware and software issues to ensure continuous, safe operation of charging infrastructure. The contract is structured as a subcontract under a Small Business Set Aside designation, specifically reserved for small businesses, with the North American Industry Classification System code 811211 indicating it falls under repair and maintenance services. The solicitation was posted on July 31, 2026, with a response deadline of August 21, 2026, and is governed by the Department of the Interior through its Ner Services Mabo (43000) entity, though the specific location of performance remains undetermined. All tasks must comply with relevant safety standards and operational requirements to support the reliability of public and federal EV charging networks.

Ner Services Mabo (43000)

POSTED

DEADLINE

Repair and Component Replacement ServicesThe contract entails the performance of corrective repairs and replacement of defective components on Guldmann ceiling lift systems, including motors, rails, Combi-locks, and switch tracks, with the goal of restoring full operational functionality. All work must be carried out to ensure the systems meet manufacturer specifications and safety standards for reliable patient transfer and mobility support. The services are required to be delivered in Decatur, Georgia, with a zip code of 30033, and must be completed within the specified timeline following award. This subcontract is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), as defined by FAR 19.14, under NAICS code 811211, which categorizes the work under repair and maintenance services. The solicitation was posted on July 31, 2026, with responses due by August 6, 2026, at 2:00 PM Eastern Time. The contracting office is the 247-NETWORK Contract Office 7 within the Department of Veterans Affairs, and the award will be made to a qualified SDVOSB capable of executing the technical requirements with precision and timeliness.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Preventive Maintenance & Inspection Services for Ceiling Lift SystemsThe contract involves providing routine preventive maintenance, inspection, testing, and cleaning services for Guldmann 3G ceiling lift systems across multiple Veterans Affairs facilities in Georgia. The work is critical to ensuring the mechanical integrity and operational safety of these systems which support patient mobility and caregiver safety in healthcare environments. All services must adhere to established safety standards and manufacturer guidelines to maintain compliance and reliability. The contract is structured as a subcontract under a Service-Disabled Veteran-Owned Small Business set-aside, classified under NAICS code 811211, indicating it is targeted specifically for businesses owned and operated by service-disabled veterans. The solicitation was posted on July 31, 2026, with a response deadline of August 6, 2026. Performance is centered in Decatur, Georgia with a zip code of 30033, and the contracting office is the 247-NETWORK Contract Office 7 under the Department of Veterans Affairs.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Preventive & Remedial Maintenance – SP 200/CCC DispensersThe contract calls for comprehensive preventive and remedial maintenance services for ScriptPro SP 200 and CCC robotic dispensing units, encompassing all aspects of mechanical, electrical, and software diagnostics and repairs. Services include routine inspections, troubleshooting malfunctions, component replacements, calibration, and software updates to ensure uninterrupted operation and regulatory compliance in high-volume pharmacy environments. The work requires skilled technicians with proven experience in automated dispensing systems, capable of performing on-site or remote diagnostics and delivering timely resolutions to minimize downtime. The contract is classified as a subcontract under NAICS code 811211, with a posting date of July 31, 2026, and a response deadline of August 10, 2026. The contracting office is the Department of Veterans Affairs through the 256-NETWORK Contract Office 16 (36C256), and performance location details are unspecified. No set-aside designation or point of contact information is provided, and the solicitation number is not listed. Interested parties must respond through the SAM. gov platform prior to the deadline to be considered for award.

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

Annual Preventive Maintenance Services for LAM-12 SystemThe contract requires the provision of annual preventive maintenance services for the LAM-12 system, encompassing comprehensive inspection, calibration, and performance verification to ensure optimal operational readiness. These services are critical for maintaining system reliability and must be performed in accordance with established technical standards and protocols. The work is to be carried out at Port Hueneme CBC Base, California, with a zip code of 93043, and the contract is structured as a subcontract under the NAICS code 811211 for medical and dental equipment repair and maintenance. The solicitation was posted on July 31, 2026, and responses are due by August 14, 2026, at 10:00 PM Eastern Time. The contracting entity is the Department of Defense, specifically under the authority of the Commanding Officer, indicating the service is intended for military or defense-related operations. There is no set-aside designation specified, and while a point of contact is not listed, interested parties are directed to the SAM.gov portal for additional details and submission procedures.

POSTED

DEADLINE

Military-Compliant Labeling and Bar-Coding ServicesThe contract requires the application of durable labels and barcodes to military containers and units in strict compliance with MIL-STD-129 standards to enable accurate automated logistics tracking. All labeling must meet the Department of Defense’s DLA RQ017 marking requirements, ensuring full interoperability with defense supply chain systems. The work involves precise, high-reliability marking procedures to maintain legibility and scannability through harsh operational environments and extended storage periods. This is a subcontract opportunity issued under the NAICS code 811211, with a response deadline of August 10, 2026, and a posting date of July 30, 2026. The contracting entity is the Active Devices Division within the Department of Defense, and performance is expected to support military logistics operations without specified geographic limitations. Bidders must be prepared to demonstrate capability in adhering to federal military labeling standards and delivering error-free, traceable unit identification through standardized barcode formats.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Quality Inspection and Acceptance SupportThe contract requires the performance of origin inspections on delivered items using either MIL-STD-1916 or ASQ Z1.4 sampling plans, with a strict zero tolerance policy for critical defects, ensuring only conforming products are accepted. The work is focused on quality assurance activities to verify that all goods meet established military and industry standards prior to acceptance. The inspection must be conducted at the point of delivery, with rigorous adherence to defined sampling methodologies to detect any non-conformances that could impact safety, functionality, or mission readiness. The contract is issued under the NAICS code 811211 and is classified as a subcontract by the ASC COMMODITIES DIVISION under the Department of Defense. Performance is required at the location in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026. Interested parties must submit proposals by the stated deadline, and the work is expected to be carried out in compliance with federal procurement requirements for defense-related quality control services.

ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days

View Details

More opportunities from Department Of Defense → FA2398 Cm Ct Interior Srv Rcn Aflcmc/hbg

Same awarding agency

NAICS: 541690

Federal

Mission-Critical System Availability Assurance

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Secure Communications Systems Engineering

POSTED

DEADLINE

Program Management and Technical Data Support

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Global Contractor Field Service Representatives (CFSRs)

Computer and Office Machine Repair and Maintenance

POSTED

8 months ago

DEADLINE

N/A

View Details