Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CLEANING SOLUTION, STER

Active
SPE2DH-26-T-5725Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits a cleaning solution, sterilizer, and ultrasonic unit cleaner/descaler specifically designed for steam autoclaves, with the product identified as CHAMBER BRITE. This item comes in pre-measured packs, sold in boxes of ten, and the requirement is for four boxes. The product is used to clean and descale the chamber, reservoir, and tubing of steam autoclaves, ensuring proper sterilization functionality. The National Stock Number is 6530-01-632-8471, with a delivery deadline of five days after award. The solicitation number is SPE2DH-26-T-5725, issued on August 2, 2026, with responses due by August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must comply with DLA standards, and suppliers are required to remove government identification from non-accepted supplies. Covered defense information may apply, and bidders must specify the source and part number being offered. The contracting office is the Medical Supply Chain FSH under the Department of Defense, with performance located in Suffolk, Virginia, and primary point of contact is Tina Vu.

General Info

CHAMBER BRITE in pre-measured packs, four boxes, for steam autoclave cleaning, delivery in five days, DLA standards apply.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

456199 - All Other Health and Personal Care RetailersView NAICS

Place of Performance

DOORWAY 71, SUFFOLK, VA, 23435-5000, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5725.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLEANING SOLUTION,STERILIZER AND ULTRASO
CLEANING SOLUTION, STERILIZER AND ULTRASONIC UNIT CLEANER/DESCALER
STERILIZER (CHAMBER BRITE); CLEANS AND DESCALES THE CHAMBER, RESERVOIR
AND TUBING OF MOST STEAM AUTOCLAVES; PRE-MEASURED PACKS; BOX OF 10
UNIT OF ISSUE: BOX/10EA
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
BIDDER: PLEASE SPECIFY SOURCE AND PART NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6530-01-632-8471 Quantity: 4 BX Purchase Request: 7017638295QTY: 4 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 456199
New
DIBBS
LUBRICANT, SURGICAL
Solicitation # SPE2DP-26-T-4417
The contract is for surgical lubricant, a sterile, latex-free, water-soluble jelly containing parabens, with each foil packet containing 2.7 grams and packaged in boxes of 144 packets as the unit of issue. The product must comply with strict technical and quality requirements outlined in the DLA Master List, and all packaging and marking must adhere to the Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item has a non-extendable shelf life of 36 months and must be stored at 20°C to 25°C (68°F to 77°F). It is regulated by the FDA and classified as a TYPE I (CODE Q) item with specific shelf-life controls. The supplier, MEDLINE INDUSTRIES, LP, must provide the item under part number MDS032273H, and the NSN is 6505-01-626-5774. The contract requires delivery of one box within 20 days to a designated military destination, with FOB destination terms and zero variance permitted on quantity. All packaging must be commercial-grade, sealed, and designed for safe transit with minimal cost to ensure unharmed delivery. The item must be marked according to MMS No. 1, and transportation details are governed by DLAD procedural notes. The contract is issued under solicitation SPE2DP-26-T-4417 with a required delivery date of August 4, 2026, and the point of contact is Nicholas Quigley of the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 456199
New
DIBBS
PAPER, MEDICAL RECORDIN
Solicitation # SPE2DS-26-T-298U
The contract specifies the procurement of medical recording paper intended for use with Propaq MD and X defibrillator monitor systems, with each unit consisting of a box containing six individual sheets. The packaging must comply with commercial standards outlined in the procurement documentation, requiring each complete unit to be sealed in a container that safeguards against damage or breakage, and all units must be shipped in exterior containers suitable for safe transport by common carriers at the lowest available rate to the designated delivery point. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must reference the NSN/Part Number 6515-01-628-6597 while clearly identifying the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivery is required within 20 days after order, under solicitation SPE2DS-26-T-298U, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance located at Tinker AFB, Oklahoma, and primary point of contact Marc Canalichio.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 456199
New
DIBBS
CATHETER AND NEEDLE UN
Solicitation # SPE2DS-26-T-299Y
The contract specifies the procurement of 84 units of a sterile, disposable, latex-free intravenous catheter and needle unit designed for decompression of pneumothorax, featuring a 14-gauge by 3.25-inch long stainless steel needle and a radiopaque F.E.P. polymer catheter with a luer-lock connection. Each unit must have a mandatory 60-month shelf life, with no more than nine months elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA Packaging Requirements, adhering strictly to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all units must be sealed in protective containers and packed in commercial shipping containers suitable for safe transport at the lowest carrier rate to the delivery point. The unit of issue is each (EA), and the quantity is fixed with zero variance allowed. Delivery is required FOB destination within five days of contract award, with inspection and acceptance occurring at the delivery point. All packaging and labeling must follow ASTM D3951 unless superseded by DLA Master List technical or quality requirements, and palletization must conform to DLA standards. The shipment must be sent via the fastest traceable means, excluding parcel post, to the specified military address at Fort Lewis, Washington, under contract SPE2DS-26-T-299Y. The item’s NSN is 6515-01-626-7948, and the procurement is governed under federal acquisition protocols with no set-aside type specified.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 456199
New
DIBBS
DOXYCYCLINE HYCLATE
Solicitation # SPE2DP-26-T-4429
DOXYCYCLINE HYCLATE TABLETS, USP, specified as 100 mg equivalent per tablet, are procured under contract SPE2DP-26-T-4429 with a total quantity of one unit of issue (BT), equivalent to 1,000 tablets. The product must be manufactured by PURACAP LABORATORIES LLC with NDC 24658-0312-10 and must adhere to a 24-month shelf life with a minimum of 21 months remaining at the time of receipt by the first government activity. Storage requirements mandate controlled room temperature between 20° to 25°C (68° to 77°F), with protection from light and moisture. All packaging must comply with commercial standards as outlined in the procurement document, requiring each unit to be sealed in a container that prevents damage or breakage, and all shipments must use commercial exterior containers that ensure safe delivery at the lowest cost to the designated destination. Labeling must follow Medical Marking Standard No. 1 dated February 4, 2013, which supersedes MIL-STD-129, and must include the NSN, manufacturer name and CAGE code, date of manufacture, expiration date, contract number, and lot number. The item is regulated by the FDA and requires referral through EBS for buyer confirmation. Delivery is due within 20 days FOB destination, with no quantity variance permitted. The shipment must be marked for delivery to MX0132, USMC/US Government-SOFA Tariff Act, Robertson Barracks, Palmerston, Australia, with additional logistics and transportation directives referenced under DLAD Proc Notes C19 and C20. The unit of issue system uses BT for 1,000 tablets, and all packaging and marking must align with the specified standards to ensure government acceptance and traceability.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 456199
New
DIBBS
INTUBATION KIT
Solicitation # SPE2DS-26-T-293P
The intubation kit is a disposable medical device containing one endotracheal tube with a stylet, one 10 cc syringe, one Velcro tube tie, and one pack of surgical lubricant, sold as a single unit. The product must have a shelf life of 24 months, with no more than three months elapsed between the date of manufacture and the date of delivery to the government. All packaging and labeling must clearly display the NSN, manufacturer name, CAGE code, date of manufacture, expiration or retest date, contract number, and lot number to ensure traceability and compliance. The kit is governed by technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed. The NSN is 6515-01-632-4831, with a quantity of one unit required under purchase request 7017682510, and delivery is due within 20 days after award. The solicitation number is SPE2DS-26-T-293P, issued by the Department of Defense’s Medical Supply Chain under the NAICS code 456199, with performance located at Hurlburt Field, Florida, and primary point of contact James Burke at james.burkejr@dla.mil or 215-737-4950.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 456199
New
DIBBS
CATHETERIZATION KIT, PN
Solicitation # SPE2DS-26-T-293X
The contract specifies the procurement of a pneumothorax catheterization kit containing a 11 Fr catheter measuring 13 cm in length, along with a thoracic vent, trocar, double-valved aspiration cannula, suction tubing set, 60 cc and 3 cc syringes, two safety needles (25 G and 22 G), a scalpel, Halstead forceps, two gauze sponges, a fenestrated drape, a CSR wrap, and a plug. The kit is regulated by the FDA and must have a shelf life of 36 months with no more than five months elapsed from manufacture to government delivery. Each unit must be sealed in a protective container and packed in commercial exterior shipping containers suitable for safe transport at the lowest cost to the designated delivery point. Packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all packaging must conform to the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951. The unit of issue is each, and the item must be shipped by traceable means—parcel post is prohibited. The kit is identified by NSN 6515-01-632-2087 and is sourced from Owens & Minor Distribution Inc and URESIL LLC under part numbers 6597TV1113 and TV11-13 respectively. Delivery is required within 20 days to Hurlburt Field, Florida, with no tolerance for quantity variance. The original required delivery date is August 3, 2026, and the contracting official must submit a referral in EBS for FDA-regulated product confirmation.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 456199
New
DIBBS
NEEDLE, HYPODERMIC
Solicitation # SPE2DS-26-T-290S
This contract is for the procurement of 100-count packages of disposable hypodermic needles,规格为21 gauge by 2 inches, with regular wall and regular bevel design, intended for medical use. The needles are sterile, latex-free, and feature a thin-wall construction that enables higher flow rates compared to standard needles of the same gauge, making them suitable for injecting high-viscosity fluids. The unit of issue is a package of 100, and the item is identified by NSN 6515-01-630-7803. Strict shelf-life requirements apply, with a non-extendable 60-month shelf life under RS001 for TYPE I (CODE S) items. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The procurement falls under the NAICS code 456199 and is managed by the Department of Defense’s Medical Supply Chain. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The delivery location is Fort Bliss, Texas, with a 20-day delivery window, and the bid must include the supplier source and part number. The solicitation, issued on July 30, 2026, has a response deadline of August 5, 2026, with Allen Costello as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 456199
New
DIBBS
TEST STRIPS, GLUCOSE
Solicitation # SPE2DS-26-T-288W
Test strips for glucose measurement compatible with the Accu-Chek Performa meter are being procured under solicitation SPE2DS-26-T-288W, with a quantity of six packages, each containing fifty strips. The product must have a minimum shelf life of eighteen months from the date of manufacture, and no more than two months may have elapsed between manufacturing and government delivery. Labeling requirements mandate clear indication of the manufacture date, expiration date, and contract or lot number in compliance with the latest Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must adhere to commercial standards, ensuring each unit is sealed and protected from damage, while exterior shipping containers must support safe, cost-effective delivery to Fort Bragg, North Carolina, with all markings conforming to the specified medical marking guidelines. The items are subject to Defense Logistics Agency packaging and quality requirements, including the removal of government identification from non-accepted supplies, and technical specifications referenced in the DLA Master List of Technical and Quality Requirements apply fully. The product code NSN 6550-01-641-7852 identifies this item within the federal supply system, and delivery is required within five days of award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 456199
New
DIBBS
CLAMP, HEMORRHAGE CO
Solicitation # SPE2DS-26-T-291H
The contract is for the procurement of a combat-ready hemorrhage control clamp designed to rapidly control severe bleeding through self-application or buddy application, featuring sterile medical-grade polycarbonate and stainless steel construction. The device is intended for immediate use in trauma scenarios and is sourced from Innovative Trauma Care US in San Antonio, Texas. Each unit is designated by NSN 6515-01-629-7044, with a quantity of 10 units required under purchase request 7017677542, and delivery must be completed within 20 days of award. The item has a non-extendable 48-month shelf life and is subject to DLA packaging standards and defense information handling protocols. Technical and quality requirements are referenced from the DLA Master List, with compliance governed by the revision in effect on the solicitation issue date. Bidders must identify their source and part number, and government identification must be removed from non-accepted supplies. The solicitation number is SPE2DS-26-T-291H, with a response deadline of August 5, 2026, and performance is to occur at Camp Lejeune, North Carolina. The contract is managed by the Department of Defense’s Medical Supply Chain under the point of contact Elizabeth Cruz.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 456199
New
DIBBS
TEST KIT, CUTANEOUS LEI
Solicitation # SPE2DS-26-T-285S
The contract is for the procurement of 2 kits of the CL Detect Rapid Test for Cutaneous Leishmaniasis, a FDA-cleared, hand-held, qualitative in vitro immunochromatographic assay designed to detect Leishmania species antigen in ulcerative skin lesions less than four months old, using samples collected with a dental broach from patients with suspected disease. Each kit contains reagents for 25 tests and is intended for medical use in military health settings. The item is classified as a Type I (Code K) medical supply with a non-extendable shelf life of 18 months and must be stored at room temperature. Packaging and labeling must strictly comply with the Medical Marking Standard No. 1 (MMS NO. 1), which supersedes MIL-STD-129 for medical acquisitions; each unit must be sealed in a protective container and shipped in commercial exterior packaging compliant with ASTM D3951 unless the material is hazardous, in which case TQ Requirement IP025 applies. Palletization must conform to DLA’s RP001 requirements, and all packaging must be marked with the contract number, NSN (6550-01-633-9195), part number (CL025), quantity, and delivery destination at Fort Bliss, Texas. Shipping must be traceable via common carrier, excluding parcel post, with delivery to the designated military address. The contract requires the offeror to specify the manufacturer and part number, and the item is subject to FDA oversight, mandating referral to a product specialist for confirmation prior to award. The contract is awarded on a fixed-price basis with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Payment will be processed electronically through Wide Area WorkFlow, and the delivery deadline is 20 days after order placement, with an original required delivery date of July 31, 2026. All contractual obligations are governed by multiple FAR and DFARS clauses addressing equal opportunity, trafficking in persons, cybersecurity, hazardous material handling, supply chain restrictions on foreign telecommunications equipment, cyber incident reporting, and safeguarding of covered defense information under NIST SP 800-171. Offerors must provide a Unique Entity ID and CAGE code, represent their small business status if applicable, and comply with DLA’s Master List of Technical and Quality Requirements, which takes precedence over commercial standards.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 456199
New
DIBBS
DRESSING, CHEST SEAL WO
Solicitation # SPE2DS-26-T-283J
The chest seal dressing is a specialized medical device designed for rapid deployment in trauma scenarios involving open chest wounds. It features a three-channel pressure relief vent system that prevents air from entering the chest cavity during inhalation while allowing trapped air and blood to escape during exhalation, reducing the risk of tension pneumothorax. The design includes a fail-safe mechanism ensuring functionality even if two of the three vents become obstructed. The dressing utilizes advanced adhesive technology to maintain a secure seal under extreme environmental conditions and is equipped with a large red-tipped pull tab for single-step peel-and-apply application, enabling easy repositioning or venting if needed. It is packaged in a foil pouch with tear-notches, measuring 7.75 inches square when undeployed, and expands to a 6-inch by 6-inch coverage area upon application. Each unit weighs 1.37 ounces and is issued individually. The product must have a shelf life of 60 months with no extensions permitted, and no more than nine months may have elapsed from the manufacturer’s production date to delivery to the government. Labeling must comply with Medical Marking Standard No. 1, including clear indications of the date of manufacture, expiration or retest date, contract number, and lot number. Packaging must meet commercial standards, with each unit sealed in a protective container and shipped in appropriate exterior packaging to ensure safe transit at the lowest feasible cost. All packaging and marking must conform to DLA requirements, superseding older military standards. The item is identified by NSN 6510-01-624-0840, with a purchase request for two units under contract SPE2DS-26-T-283J, requiring delivery within 20 days to Fort Bragg, North Carolina. Bidders must specify their source and part number, and all technical specifications referenced are governed by the DLA Master List of Technical and Quality Requirements.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 456199
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-281T
The product is a pediatric surgical sponge measuring 24 inches by 38 inches, designed for use on partial to full thickness wounds and first to second degree burns. It is a multi-layered, sterile, non-permeable dressing with a high-density polyethylene outer and wound contact layer, an anti-shear layer of the same material, and inner layers composed of a highly absorbent rayon and cellulose blend. The dressing is engineered to wick exudate away from the wound site throughout the entire padding, thereby reducing the frequency of dressing changes and minimizing the risk of tissue maceration and irritation. Each case contains 24 units, sold as a box of 24, and is labeled to meet strict government specifications. The item has a fixed 36-month shelf life with no extension permitted, and delivery to the government must occur within five months of the manufacturer’s date. Labeling must include the manufacturer date, expiration or retest date, contract number, and lot number in compliance with MMS1A standards. The product falls under NSN 6510-01-630-8705, with a procurement quantity of two boxes and a delivery deadline of 20 days after award. Packaging must comply with DLA requirements, and all supplies must be free of government identification prior to delivery. The solicitation, issued under SPE2DS-26-T-281T, is governed by DLA’s Master List of Technical and Quality Requirements, and the point of contact is Mary-Kathryn Donahue of the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

5 days ago

DEADLINE

in about 20 hours
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 339114
New
DIBBS
FILE, ENDODONTIC, HAND
Solicitation # SPE2DH-26-T-5706
These endodontic hand files are precision dental instruments with a square cross-sectional design, optimized for root canal cleaning, unclogging, and shaping procedures. Manufactured from premium stainless steel, they are engineered for durability, resistance to fracture, and high cutting efficiency, ensuring reliable performance during clinical use. The instruments feature color-coded plastic handles with grooves and an ergonomic shape to enhance tactile feedback and provide a secure, comfortable grip for dental professionals. Each unit is packaged as a set of six, with the specified NSN 6520-01-718-4102 and a quantity of four packages required under purchase request 7017638333. A shelf-life restriction of 12 months applies and is non-extendable, with packaging and supply requirements governed by DLA standards including the removal of government identification from non-accepted items. The solicitation, issued by the Department of Defense under contract SPE2DH-26-T-5706, mandates supplier information including source and part number, with bids due by August 10, 2026, and delivery required within five days of award to Suffolk, Virginia. The items are subject to defense information protocols and technical quality standards as referenced in the DLA Master List.
Dental Equipment and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
SURGICAL PACK, DISPOSAB
Solicitation # SPE2DH-26-T-5695
The contract specifies the procurement of a disposable surgical pack containing one drape towel with adhesive, one lithotomy sheet with attached legging, two absorbent towels, and one reinforced plastic outer wrap or table cover measuring 44 inches by 90 inches, all packaged as a unit of issue consisting of ten each per package. Two such packages are required under purchase request 7017656189 for delivery within 20 days of award. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a container that safeguards contents from damage and breakage, and shipped in robust exterior containers suitable for safe delivery by common carriers at the lowest possible rate to the specified delivery point in APO, 09094-3219. Marking must adhere strictly to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support or online. The solicitation is governed by DLA Packaging Requirements and incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. This is a federal solicitation under NAICS code 423450 issued by the Department of Defense’s Medical Supply Chain FSH, with responses due by August 10, 2026, and technical inquiries directed to Tina Vu.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339920
New
DIBBS
FILTER SET, RADIOGRAPHI
Solicitation # SPE2DH-26-T-5711
The contract specifies the procurement of one filter set for radiographic use, part number 9703045-00, supplied by RTI Electronics, Inc. with CAGE code 46PM4, under the NSN 6525-01-606-9939. The item is intended for medical applications and must comply with stringent packaging and marking requirements outlined in Medical Marking Standard No. 1, which supersedes all references to MIL-STD-129. Each unit must be sealed in a protective container to prevent damage during transit and packed within commercial shipping containers suitable for safe and cost-effective delivery via common carrier to the destination point. Packaging must adhere to DLA’s procurement requirements and the specified commercial standards for medical acquisitions, with no use of military packaging standards unless explicitly overridden. Delivery is required within 20 days FOB destination, with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The contract references technical and quality requirements from the DLA Master List, and the item is subject to provisions regarding covered defense information. The solicitation number is SPE2DH-26-T-5711, with a response deadline of August 10, 2026, and a required delivery date of August 4, 2026. The point of contact for inquiries is Tina Vu with the Medical Supply Chain FSH.
Sporting and Athletic Goods Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
CASSETTE, FILTER
Solicitation # SPE2DH-26-T-5704
The contract is for a single unit of a cassette filter with a 5.0 micron rating, 25mm disk size, identified by NSN 6640-01-492-5120, under solicitation SPE2DH-26-T-5704. The item must be supplied in compliance with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Packaging must adhere to DLA packaging standards and the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in a suitable container to prevent damage during transit. Shipments must be placed in commercial exterior containers capable of safe delivery via common carrier at the lowest cost to the designated delivery point in Tampa, Florida. Bidders are required to specify the source and part number being offered, and all items must be marked in accordance with the Medical Marking Standard. The contract includes provisions for the removal of government identification from non-accepted supplies and potential application of covered defense information standards. Delivery is required within five days of award, and responses are due by August 10, 2026. The purchasing office is part of the Department of Defense, Medical Supply Chain FSH, with point of contact Tina Vu available for inquiries.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
BUFFER SOLUTION, STA
Solicitation # SPE2DH-26-T-5688
The contract specifies the procurement of 30 packets of buffer solution powder, comprising 15 red packets for pH 4.01 and 15 yellow packets for pH 7.00, packaged in plastic cases for medical use. Each unit must be sealed in a suitable container to prevent damage or breakage and shipped in commercial exterior containers that ensure safe delivery at the lowest cost to the designated point. All packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number. The item has a non-extendable shelf life of 24 months, and no more than three months may have passed from manufacture to government delivery. The NSN is 6630-01-494-3676, and the contract number is SPE2DH-26-T-5688, with a 20-day delivery requirement. Bidders must provide the source and part number being supplied, and the procurement falls under DLA packaging and quality requirements, including compliance with the DLA Master List of Technical and Quality Requirements. Covered defense information may apply, and government identification must be removed from non-accepted supplies as per applicable standards.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
SHAVING KIT, HOSPITAL P
Solicitation # SPE2DH-26-T-5732
The contract is for the procurement of hospital patient shaving kits, each containing one disposable razor and one tube of shaving cream, packaged in units of 25 kits per pack (PG). The kits are intended for patient personal care in hospital settings and must comply with DLA’s packaging and marking standards, specifically Medical Marking Standard No. 1, which replaces MIL-STD-129. Each kit must be sealed in a protective unit container and packed in commercial exterior shipping containers suitable for safe delivery via common carrier at the lowest cost to the designated destination. The items are identified by NSN 6530-01-354-1156 and manufacturer part number DYKD2001S from MEDLINE INDUSTRIES, LP. Delivery is required within five days FOB destination with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The contract is subject to DLA’s technical and quality requirements referenced from the Master List, and all material must be marked and packaged in accordance with specified defense and medical standards. The solicitation number is SPE2DH-26-T-5732, with a response deadline of August 10, 2026, and the place of performance is Travis AFB, CA. The federal agency managing the acquisition is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334510
New
DIBBS
ANALYZER, BLOOD CHOLEST
Solicitation # SPE2DH-26-T-5680
The contract is for the procurement of four kits of the Accutrend Plus blood cholesterol analyzer, a portable, lightweight device designed for reliable cholesterol testing without the need for fasting, refrigeration, or capillary tubes. The meter features a larger, easy-to-read display, ergonomic design for convenient handling, built-in self-testing and safety features that reduce contamination risk by allowing blood application outside the device, and operational capability in ambient temperatures between 64°F and 95°F, making it suitable for both clinical and field use. Each kit includes the meter, user manual, reference card, troubleshooting guide, four AAA batteries, and a protective case. The product is commercial off-the-shelf medical equipment, packaged and marked in compliance with Medical Marking Standard No. 1, superseding MIL-STD-129, and shipped in commercial containers ensuring safe delivery at the lowest freight cost to Fort Hood, Texas, with a 20-day delivery requirement. The acquisition is conducted under solicitation SPE2DH-26-T-5680 issued by the Department of Defense’s Medical Supply Chain FSH, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, and packaging standards enforced per RP001 and RQ011. The NSN 6630-01-689-9343 identifies the item, and the contract fall under NAICS code 334510 for medical equipment manufacturing. All supplies must be free of government identification if not accepted, and the point of contact for inquiries is Tina Vu, with full documentation available through the DLA eProcurement portal. The solicitation closed on August 10, 2026, and the purchase request is numbered 7017684185, with delivery specified for ADO.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334515
New
DIBBS
WATER SAMPLING TEST RE
Solicitation # SPE2DH-26-T-5687
The contract specifies the procurement of Monochloramine Reagent Powder Pillows, identified by NSN 6630-01-606-5361, with a unit of issue being a package containing 100 pills per pallet. The item is classified as a Type I hazardous material with a non-extendable shelf life of 12 months, requiring that no more than two months have elapsed from the date of manufacture to the date of delivery to the government. All packaging and labeling must strictly adhere to MMS1D standards, including clear markings for the date of manufacture, expiration or retest date, and the contract or lot number. Compliance with hazardous materials regulations under 49 CFR and ICAO standards is mandatory, and a current Material Safety Data Sheet (MSDS) must accompany each shipment and be submitted electronically to DLA.MSDS@DLA.MIL with the required cover sheet. The item is subject to DLA packaging requirements and the removal of government identification from non-accepted supplies. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The solicitation, issued under SPE2DH-26-T-5687, has a response deadline of August 10, 2026, and requires delivery within 20 days of award, with the placing organization being the Department of Defense’s Medical Supply Chain FSH.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339114
New
DIBBS
RUBBER DAM
Solicitation # SPE2DH-26-T-5723
The contract specifies the procurement of 15 sheets of a non-latex rubber dam measuring 6 x 6 inches, identified by the NSN 6520-01-717-7806, with a teal green color and regular medium thickness, packaged as a single unit of issue. The item is intended for medical use and must comply with technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. Packaging must meet DLA procurement standards, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being submitted. The solicitation, issued under SPE2DH-26-T-5723 on August 2, 2026, with a response deadline of August 10, 2026, is managed by the Department of Defense’s Medical Supply Chain FSH, with performance delivery to APO 09094-3219 within 20 days of award. Primary point of contact is Tina Vu via email and phone provided. Covered defense information may apply, and the NAICS code 339114 denotes classification under dental and orthopedic appliances manufacturing.
Dental Equipment and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
GOWN, OPERATING, SURG
Solicitation # SPE2DH-26-T-5694
The contract is for the procurement of adult surgical gowns in X-large, extra-long size with an A-line design, full back, full length, waist tie, long raglan sleeves, and white elastic cuffs, all in blue, sterile, disposable, and fluid-resistant, constructed from plastic polypropylene SMS material meeting AAMI Level 4 standards. Each gown is accompanied by a hand towel, and the unit of issue is a case containing sixteen gowns. The product must have a shelf life of 60 months, with no more than nine months elapsed from the date of manufacture to the date of delivery to the government. Packaging and technical requirements are governed by DLA standards, including compliance with the DLA Master List of Technical and Quality Requirements referenced under RP001, RA001, and RQ011, which dictate packaging, quality controls, and the removal of government identification from non-accepted supplies. The item is identified by NSN 6532-01-730-7599 with a total quantity of eight cases required under purchase request 7017405710, with delivery due within twenty days after award. The solicitation, issued under SPE2DH-26-T-5694, was posted on August 2, 2026, with responses due by August 10, 2026, and is targeted for performance at Fort Detrick, Maryland, under the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
ROOT CANAL PREPARATION
Solicitation # SPE2DH-26-T-5699
This contract pertains to the procurement of a Root Canal Preparation Syringe Kit, which includes five 3cc syringes and fifty application tips, formulated with a specialized water-soluble base containing glycol, urea peroxide, and EDTA to effectively remove calcifications and lubricate root canals for improved instrumentation efficiency. Each kit is the unit of issue, and the item is identified by NSN 6520-01-674-0176 with a procurement quantity of four kits. The item has a non-extendable shelf life of 24 months and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements under identification codes RS016, RA001, RD003, RP001, and RQ011. Hazardous materials regulations apply, requiring a current Material Safety Data Sheet (MSDS) to be submitted electronically to DLA.MSDS@DLA.MIL with cover sheet P-75 and to physically accompany each shipment, packaged in accordance with SPE2DH-26-T-5699, 49 CFR, and ICAO standards. The solicitation issued on August 2, 2026, with a response deadline of August 10, 2026, is under the NAICS code 339112, managed by the Department of Defense’s Medical Supply Chain FSH office, with performance delivery required in Suffolk, Virginia, within five days of award, and primary point of contact is Tina Vu.
Surgical and Medical Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423450
New
DIBBS
TABLE, SURGICAL INST
Solicitation # SPE2DH-26-T-5733
The contract specifies the procurement of two surgical anesthesia utility tables, each with a single drawer made of stainless steel, rectangular in shape, measuring 20 inches in width, 16 inches in depth, and 34 inches in height, equipped with 3-inch wheel casters. These units are destined for federal medical use under the NSN 6530-00-710-0220 and must be delivered within 170 days of award. Packaging requirements are strictly defined: each unit must be sealed in a commercial container that prevents damage or breakage, with exterior shipping containers compliant with commercial standards and capable of safe transport at the lowest cost to the delivery point in New Cumberland, PA. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must clearly indicate the source and part number being supplied. The contract references DLA’s Master List of Technical and Quality Requirements, indicating adherence to specific technical and quality criteria identified by R or I numbers, and incorporates DLA’s packaging guidelines. Government identification must be removed from non-accepted supplies, and all bids must respond to the solicitation number SPE2DH-26-T-5733 with full compliance to the stated procurement rules and deadlines.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details