Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CLIP, HEADBAND HELME

Active
SPE1C1-26-T-1587Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 240 units of CLIP, HEADBAND HELME with NSN 8470-01-729-3458, to be delivered FOB destination within 20 days of award, with no tolerance for quantity variance. The items must comply with MIL-STD-2073-1E packaging standards and be marked according to MIL-STD-129 and MIL-STD-147, with no special marking required. Packaging must adhere to DLA’s procurement requirements, and all units must be palletized accordingly. Delivery is directed to the USS GEORGE H W BUSH CVN 77 in Norfolk, Virginia, with shipment coordinated under DLA procedural notes C19 and C20. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date. The contract is issued under solicitation SPE1C1-26-T-1587, with a response deadline of August 17, 2026, and an original required delivery date of August 7, 2026. The item is classified under NAICS code 339999, and point of contact is Jennifer Scarpello at safetyprotection@dla.mil. Covered Defense Information provisions may apply, and government-specific identifiers are included for internal tracking and logistics use.

General Info

Procure 240 CLIP HEADBAND HELME units, FOB destination, deliver to CVN 77 by August 7, 2026, per DLA and MIL-STD standards.

Agency

Department Of Defense → C AND T SUPPLY CHAINView Agency

NAICS

339999 - All Other Miscellaneous ManufacturingView NAICS

Place of Performance

1968 MORRIS STREET, NORFOLK, VA, 23511, US

Set-Aside

NONE

Documents

(1)

SPE1C1-26-T-1587.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → C AND T SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → C AND T SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Jennifer Scarpello
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLIP,HEADBAND HELME
CLIP,HEADBAND HELME
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
TEAM WENDY LLC 3FNR9 P/N 80-CAK-BP
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017744595 0001 EA 240.000
NSN/MATERIAL:8470017293458
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
SPE1C1-26-T-1587
SECTION B
PR: 7017744595 PRLI: 0001 CONT’D
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGING SHALL BE IN ACCORDANCE WITH MIL-STD-129 and MIL-STD-147
PARCEL POST ADDRESS:
V23170
USS GEORGE H W BUSH CVN 77
BLDG Y-109 DOORWAY 11
1968 MORRIS STREET
NORFOLK VA 23511
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V23170
USS GEORGE H W BUSH CVN 77
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
M/F: (TCN) V2317062150725
RDD: 777
PROJ: 9AL TP 2
SUPP ADD: YYSTOC SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A41 DIST: V9B ADV: FC: KZ
Need Ship Date:00/00/0000 Original Required Delivery Date:08/07/2026
SPE1C1-26-T-1587 NSN/Part Number: 8470-01-729-3458 Quantity: 240 EA Purchase Request: 7017744595QTY: 240 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339999
New
DIBBS
DRAFTING INSTRUMENT
Solicitation # SPE8E9-26-T-3303
This contract governs the procurement of drafting instruments under NSN 6675-00-641-3531, with a quantity of 64 units, pursuant to solicitation SPE8E9-26-T-3303. The technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, referenced by R-numbers such as RP001, RQ006, and RA001, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless a solicitation amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents. Portable devices containing mercury must meet shock-proof standards and include a secondary containment boundary as mandated by NAVSEA 5100-003D. The product specification deviates from CID A-A-52034 in specific ways: the center horn must be a transparent plastic disc with defined diameter and tolerance, paired with a centered rubber gasket having prescribed dimensions and protrusion, and revised nomenclature replaces obsolete classifications for protractors and triangles, now correctly identifying them as semicircular protractors and triangles with specified angles and dimensions. The contract item is procured as a fully competitive commercial item under federal specification, with delivery due 167 days after award, and is managed by the Department of Defense’s Construction & Equipment MRO Service I, with performance located in New Cumberland, Pennsylvania.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
VALVE, FIRE EXTINGUI
Solicitation # SPE8E6-26-T-4005
The contract pertains to the procurement of four fire extinguisher valves with NSN 4210-01-107-3418 under solicitation SPE8E6-26-T-4005, issued by the Department of Defense through the Albany Transportation Officer office. Delivery is required within 167 days after award, and the solicitation closed on August 17, 2026. The item is classified under NAICS code 339999 and is subject to stringent export control regulations under ITAR or EAR, meaning all technical data associated with it is restricted and cannot be disclosed to foreign persons, including foreign nationals within the U.S., without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs handling of this controlled data, and access is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been explicitly approved by DLA’s controlling authority. Additionally, the vendor must be a CMMC Level 2 certified third-party assessment organization, as the contract involves covered defense information, requiring implementation of specified cybersecurity practices to protect sensitive data.
ALBANY TRANSPORTATION OFFICER

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
SLING, ENDLESS
Solicitation # SPE8EE-26-T-2281
The contract pertains to the procurement of 13 units of an endless sling identified by NSN 3940-99-853-3232 under purchase request 7017758345, with a delivery requirement of 167 days ADO. The solicitation, issued under number SPE8EE-26-T-2281, was posted on August 5, 2026, with responses due by August 17, 2026. The acquisition falls under the NAICS code 339999 and is categorized as a federal procurement managed by the Department of Defense through the Construction & Equipment Manu & Con agency. The place of performance is specified as New Cumberland, Pennsylvania, with Philip Ferrara listed as the primary point of contact, reachable via email and phone provided. Compliance with DLA packaging requirements is mandatory, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a later amendment supersedes it. Additionally, the contract may involve covered defense information, and any non-accepted supplies must have government identification removed in accordance with prescribed protocols.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
BLOCK, TACKLE
Solicitation # SPE8EE-26-T-2219
The contract covers the procurement of 496 units of a block and tackle item under solicitation SPE8EE-26-T-2219, awarded to Royson Engineering Company with part number 1776 and NSN 3940-00-263-3041, at a unit price of $496.00 for a total value of $246,016. Delivery is required FOB origin within 73 days of award, with no tolerance for quantity variance, and must be completed by May 20, 2026, despite the original required delivery date of January 13, 2027. All items must comply strictly with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, using specific packaging methods including dry preservation and intermediate containment in E5 containers. The item must be palletized in accordance with DLA guidelines and shipped to the designated receiving warehouse in Tracy, California, with no special marking required. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the supplied hardware, except in specific exceptions such as functional mercury in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier as mandated by NAVSEA 5100-003D. The solicitation is set aside for Women-Owned Small Businesses under NAICS code 339999 and is governed by the DLA Master List of Technical and Quality Requirements with revisions effective as of the solicitation issue date; inspection and acceptance occur at the destination. The contract’s point of contact is Philip Ferrara, and all transportation details are subject to DLAD Procurement Notes C19 and C20.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
BUSHING, NONMETALLIC
Solicitation # SPE4A7-26-Q-0972
The contract is for the procurement of 325 nonmetallic bushings with NSN 5365-01-620-9298 under solicitation SPE4A7-26-Q-0972, with a response deadline of August 15, 2026, and a delivery requirement of 108 days after contract award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, regardless of location, without explicit authorization from the Department of State or Commerce. This restriction applies to all entities, including U.S. companies and their foreign subsidiaries, and extends to foreign national employees. Access to the controlled data is limited exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA. The Defense Logistics Agency enforces these controls through DFARS 252.225-7048, ensuring compliance with federal export policies. The place of performance is Hill Air Force Base, Utah, and the primary point of contact for the solicitation is Mykhara Robinson of the Department of Defense’s ASC Supplier Oper AE and AF Division, reachable via email at mykhara.robinson@dla.mil.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 339999
New
DIBBS
EXTINGUISHER, FIRE
Solicitation # SPE8E6-26-T-4027
The contract pertains to the procurement of 193 portable dry chemical fire extinguishers, specifically modeled as gas cartridge type using potassium bicarbonate, each weighing 20 pounds and colored red, conforming to the Commercial Item Description for fire extinguishers and meeting MIL-STD-130N identification standards. The extinguishers are classified as hazardous under Title 49 CFR Division 2.2 as non-flammable, non-poisonous gas and must be packaged, marked, and shipped in strict compliance with MIL-STD-2073-1E and IP025 requirements for hazardous materials, with palletization and labeling governed by DLA’s RP001 packaging guidelines and MIL-STD-129 marking specifications. The contract is issued under solicitation SPE8E6-26-T-4027 with a critical application designation, full and open competition, and no quantity variance allowed. Deliveries are split into two CLINs—12 units to be delivered to the New Cumberland, Pennsylvania facility and 181 units to the San Joaquin, California facility—both FOB destination with an inspection and acceptance point at the delivery location, and a mandatory 69-day delivery window from the need ship dates of December 16, 2025 and May 26, 2026 respectively, with a final required delivery date of December 4, 2026. All technical and quality requirements are incorporated via the DLA Master List of Technical and Quality Requirements referenced by R-numbers, and the item is identified by NSN 4210-01-290-0755 and part number AA393-B2D.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
SLING, ASSEMBLY
Solicitation # SPE8EE-26-T-2252
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
Federal
Rocket Parts
Solicitation # W911S226U3945
The U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is seeking qualified small businesses to provide rocket parts under a combined solicitation with the number W911S226U3945. This opportunity is exclusively set aside for small businesses as defined by the Small Business Administration, ensuring that only eligible small business concerns may respond. The North American Industry Classification System code is 339999, indicating it falls under miscellaneous manufacturing. The solicitation was posted on August 5, 2026, with a firm deadline for responses set for August 12, 2026, at 8:30 p.m. Eastern Time. Performance will be carried out at an unspecified location with a ZIP code of 10996, though the contracting office is located at Fort Drum, New York, 13602-5220. Primary point of contact for all inquiries is Jessica Kelley, reachable via phone at 845-938-4955 or email at jessica.l.kelley24.civ@army.mil. Interested parties must submit responses through the SAM.gov portal using the provided UI link.
W6QM Micc-Ft Drum

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339999
New
SLED
Pop-Up Stationary Infantry Targets Supply
Utah

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339999
New
DIBBS
Identification Marker Manufacturing and SupplyThe contract involves the manufacture and supply of identification markers with the NSN 7690-01-242-4556, which must have a 12-month shelf life and adhere strictly to MIL-STD-129 and MIL-STD-2073-1E for labeling and packaging requirements. These standards ensure uniformity, durability, and compatibility with military logistics systems, making compliance essential for acceptance and use across Department of Defense supply chains. The product must be produced to exact specifications to guarantee traceability, environmental resilience, and proper handling throughout its usable life. This is a subcontract opportunity posted by the Defense Logistics Agency under the NAICS code 339999, with a response deadline of August 17, 2026. The solicitation is part of broader efforts to maintain standardized identification systems for military inventory and distribution, and all offers must demonstrate the capability to meet the stringent packaging and labeling mandates. The place of performance and specific delivery locations are not detailed in the posted information, but contractors are expected to support DLA’s nationwide and potentially global logistics infrastructure. Participation requires proven experience in military-grade production and the ability to deliver consistent quality within the specified shelf life timeframe.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
Procurement of Identification Markers (NSN: 7690011686885)
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
NON-NSN ITEM
Solicitation # SPE7L1-26-T-916E
A single unit of a non-NSN item, part number 6C040-56150 manufactured by KUBOTA ENGINE AMERICA CORP with CAGE code 1Q0C4, is being procured under contract SPE7L1-26-T-916E for delivery to Fort Carson, Colorado, with a required delivery date of August 4, 2026. The item must be delivered within 20 days of contract award FOB destination, with no variance allowed in quantity—exactly one unit is required. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 unless superseded by higher-priority DLA technical and quality requirements, with all markings and labeling strictly following MIL-STD-129. Packaging must adhere to DLA’s RP001 palletization standards, with a single unit per pack. The shipment must be sent by the fastest traceable means, excluding parcel post, and the receiving point is the Central Receiving Point, Building 330, at Fort Carson, with the mandatory marking reference W91FPV62160002. The contract is issued by the Department of Defense under the Land Supply Chain, and all government-specific identifiers, including the IPD, DIC, and supply chain codes, are embedded for tracking and administrative use.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → C AND T SUPPLY CHAIN

Same awarding agency

NAICS: 315210
New
DIBBS
GLOVES, MEN'S AND WOMEN
Solicitation # SPE1C1-26-T-1589
The contract specifies the procurement of men’s and women’s gloves compliant with the MechMIX MG55 specification sheet under Cage Code 07LZ4, available in five sizes—small, medium, large, x-large, and xx-large—each associated with a unique NSN and UPC code for inventory and tracking purposes. The gloves are to be delivered in a quantity of 15 pairs with a 20-day delivery window from award, under purchase request 7017683157. No PDMs, FAT, or patterns are required, and the acquisition falls under a simplified process governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the controlling revision determined by the solicitation issue date. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed. The contract is issued under solicitation SPE1C1-26-T-1589 by the Department of Defense through C and T Supply Chain, with performance located in Harrison, AR, and point of contact Ryan Zarkowski listed for inquiries.
Cut and Sew Apparel Contractors

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
DIBBS
LINER, FLYER'S HELME
Solicitation # SPE1C1-26-T-1586
The contract pertains to the procurement of Liner, Flyer’s Helmet, identified by NSN 8415-01-682-1462 and part number PFG-5-4015-2, with a total quantity of three units to be delivered within twenty days of order placement. Delivery is specified as FOB destination with no tolerance for variance in quantity, and inspection and acceptance will occur at the destination point. Packaging must comply with applicable federal standards—ASTM D3951 for non-hazardous material or TQ requirement IP025 if classified as hazardous, with all packaging and labeling strictly following MIL-STD-129. Palletization must adhere to DLA Packaging Requirement RP001, and the unit of issue is each (EA). The shipment must not be sent via parcel post and must use traceable freight methods, directed to the designated delivery location at 400 Langley Rd, Building 52, Egg Harbor Twp, NJ 08234-9507. The contract number is SPE1C1-26-T-1586, with a required delivery date of July 29, 2026, and the procuring activity is the Department of Defense through C and T Supply Chain. The point of contact for inquiries is Jennifer Scarpello, with contact information provided for email and phone. Covered defense information potentially applies, and the contract includes internal government tracking identifiers for procurement and distribution management.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
DIBBS
BAG, INDIVIDUAL EQUI
Solicitation # SPE1C1-26-T-1591
The contract specifies the procurement of three individual equipment bags under NSN 8465-01-690-3107 with a unit price of $3.00 and a total value of $9.00, to be delivered within 20 days FOB destination. Each item must be individually labeled with a paper tag made of standard bleached sulfate paper weighing 100 pounds, featuring a smooth finish suitable for thermal transfer and direct printing, with a hole for attachment via fastener. The label must display a 13-digit National Stock Number (NSN) and a corresponding 12-digit Universal Product Code (UPC) assigned by the government, both printed in medium to high density and positioned to remain fully visible when the item is folded and packaged without damaging the product. Barcodes must be scannable, with human-readable interpretation clearly legible. Tags must adhere to MIL-DTL-32075 Type VIII if items are bundled or sold individually, or Type VII if enclosed in plastic. Packaging must comply with MIL-STD-129, and if non-hazardous, follow ASTM D3951 unless superseded by DLA Master List requirements. Hazardous items must meet TQ requirement IP025 per FED-STD-313. Palletization and unit packing follow DLA Packaging Requirements, and inspection is governed by FAR 52.246-2. The deliver address is a U.S. Navy facility in Yokosuka, Japan, with delivery required by August 7, 2026. The solicitation number is SPE1C1-26-T-1591, issued by the Department of Defense under C and T Supply Chain, with technical and quality specifications binding as defined by the current DLA Master List, and sampling procedures may now reference MIL-STD-1916 or ANSI/ASQ Z1.4 instead of the canceled MIL-STD-105E.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 315210
New
DIBBS
GLOVES, MEN'S AND WOMEN
Solicitation # SPE1C1-26-T-1588
Gloves for men and women must be manufactured in strict compliance with the MechaniX MG55 specification sheet and are identified by specific NSNs for each size—small, medium, large, x-large, and xx-large—each paired with a designated UPC for tracking. The contract requires a quantity of 50 pairs, with delivery expected within 20 days of award, under purchase request 7017684025. No PDMs, FATs, or patterns are needed, and the items are not subject to packaging or inspection requirements beyond those referenced in the DLA Master List of Technical and Quality Requirements, which governs compliance. The solicitation, issued under SPE1C1-26-T-1588, was posted on August 5, 2026, with responses due by August 17, 2026, and is classified under NAICS code 315210. Performance is to be delivered to Harrison, Arkansas, 72601-0000, with Ryan Zarkowski designated as the primary point of contact. Covered defense information provisions apply, and all non-accepted supplies must have government identification removed prior to return.
Cut and Sew Apparel Contractors

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
DIBBS
GLOVES, MEN'S AND WOMEN
Solicitation # SPE1C1-26-T-1590
Gloves for men and women must be manufactured in strict compliance with the MechaniX MG55 specification sheet under cage code 07LZ4, ensuring consistent quality and performance standards. The contract specifies five sizes—small, medium, large, x-large, and xx-large—each linked to a unique NSN and corresponding UPC barcode for accurate inventory and distribution tracking. No PDMs or FATs are required, and no pattern submission is needed, simplifying the procurement process. The contract references technical and quality requirements from the DLA Master List, with the applicable revision controlled by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and all non-accepted supplies must have government identification removed prior to return. The item is being procured under solicitation SPE1C1-26-T-1590, with a target delivery within 20 days of award for a quantity of 50 pairs. The purchase request number is 7017683200, and the place of performance is Harrison, Arkansas. All proposals must be submitted by August 17, 2026, and the point of contact for inquiries is Ryan Zarkowski of the Department of Defense, C and T Supply Chain.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 315210
New
DIBBS
MAS SHIELD KIT, SPEC
Solicitation # SPE1C1-26-T-1580
The contract specifies the procurement of MAS SHIELD KITS under solicitation SPE1C1-26-T-1580, with the NSN 8415-01-594-0416 and part number 05D12001-2 or 05D12001-3, supplied by GENTEX CORPORATION. Five units are required across multiple CLINs, each with a unit price of $1.00 or $3.00, totaling $13.00, and all deliveries must occur within five days of order placement under FOB destination terms with no tolerance for quantity variance. Compliance with MIL-STD-2073-1E, MIL-STD-147, and MIL-STD-129 packaging and marking standards is mandatory, including the use of specific packaging codes and prohibiting parcel post in favor of traceable shipping methods. Delivery addresses span multiple U.S. Marine Corps locations, including Jacksonville, North Carolina; Quantico, Virginia; and Okinawa, Japan, with detailed shipping instructions and transport control numbers provided for each destination. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, with revisions tied to solicitation or award dates depending on acquisition size. The original required delivery dates range from July 20 to August 3, 2026, and all shipments must be palletized according to DLA packaging guidelines. Government use codes, distribution identifiers, and project tracking data are included for internal logistics and accountability.
Cut and Sew Apparel Contractors

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
DIBBS
FIELD PACK
Solicitation # SPE1C1-26-T-1585
The contract is for the procurement of 12 units of a FIELD PACK with NSN 8465-01-706-1442 and part number 56565, to be delivered to JBSA Lackland, Texas within 20 days of contract award. The unit of issue is each, with a fixed quantity of 12 and no variance allowed. Delivery is FOB destination, where inspection and acceptance occur upon receipt. Packaging must comply with DLA’s packaging requirements and MIL-STD-129 for marking and labeling; the cage color must be Kangaroo 134. If the item is not hazardous under FED-STD-313, it must be commercially packaged per ASTM D3951, but DLA’s Master List of Technical and Quality Requirements override any conflicting provisions. Hazardous material shipments must adhere to SPE1C1-26-T-1585. Palletization must follow RP001 guidelines. Shipping is strictly by traceable freight; parcel post is prohibited. The delivery address and freight address are identical and must be used for all shipments. A government point of contact is listed for safety and protection inquiries. The required delivery date is August 6, 2026, and the solicitation closed for responses on August 17, 2026.
Apparel Accessories and Other Apparel Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 315210
New
DIBBS
MAS SHIELD KIT, SPEC
Solicitation # SPE1C1-26-T-1582
The contract specifies the procurement of MAS SHIELD KITS with NSN 8415015940415, covering four distinct line items totaling 12 units at unit prices of $3.00, $4.00, $1.00, and $5.00 respectively, with all deliveries required FOB destination within five days of order. The supplier, GENTEX CORPORATION, must adhere to strict packaging standards including MIL-STD-147, MIL-STD-129, and MIL-STD-2073-1E, with no special marking required and palletization compliant with DLA packaging requirements. All shipments must be traceable and parcel post is explicitly prohibited. Delivery addresses vary by CLIN, targeting locations in Jacksonville, North Carolina, and Okinawa, Japan, with each shipment linked to specific transportation procedures and government tracking identifiers. Inspection and acceptance occur at origin, with zero variance allowed in quantity and no flexibility in delivery timing as dates are fixed for July and August 2026. The contract incorporates technical and quality requirements from the DLA Master List, applicable defense information protocols, and mandates compliance with government serialization and distribution protocols, including designated contact points and administrative codes for government use.
Cut and Sew Apparel Contractors

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
DIBBS
BELT, INDIVIDUAL EQU
Solicitation # SPE1C1-26-T-1578
This contract pertains to the procurement of three individual equipment belts under NSN 8465-01-718-7382 and part number MARCH-MC-M, issued by the Department of Defense through DLA with solicitation number SPE1C1-26-T-1578. The units are to be delivered FOB destination within 20 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur upon arrival at the specified delivery point. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and codes, with labeling adhering to MIL-STD-129 and a UPC of 718020955469. Palletization follows DLA packaging requirements, and shipments must be traceable—parcel post is prohibited. The delivery is directed to Fort Bragg, North Carolina, with a designated shipping and marking address tied to W91KBP, and the government reference number is TCN W91KBP61970220. The contract incorporates technical and quality requirements from the DLA Master List, and covered defense information provisions apply. The unit price is $3.00 per EA, resulting in a total price of $9.00 for the three units, and the original required delivery date is July 23, 2026. All items are subject to federal acquisition regulations and must meet applicable defense standards without modification.
Apparel Accessories and Other Apparel Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 313210
New
DIBBS
WEBBING, TEXTILE
Solicitation # SPE1C1-26-T-1581
Webbing, textile with part number 406701000OD7 and NSN 8305016903011 is procured under solicitation SPE1C1-26-T-1581 with a required delivery date of January 15, 2027, and a delivery window of 112 days. The material specifications include a width between 0.9375 and 1.0625 inches, thickness of 0.038 to 0.050 inches, plain weave with a two-up two-down binder, and a minimum breaking strength of 1200 pounds. Weight must not exceed 0.71 ounces per square yard, with ground and binder yarns at 840 denier and filling yarn at 420 denier. The contract mandates compliance with DLA’s master list of technical and quality requirements, packaging standards per MIL-STD-2073-1E, and marking per MIL-STD-129 without special codes. Delivery is FOB destination to Arizona Industries for the Blind in Phoenix, with zero variance allowed in quantity. The supplier, Bally Ribbon Mills with CAGE code 83435, must adhere to documentation requirements for source approval, removal of government identification from non-accepted items, and handling of covered defense information. The unit of issue is RL, with a total quantity of 4 rolls ordered at a total price of $4.000. Transportation and shipping protocols are governed by DLA procedural notes C19 and C20, and the contract falls under NAICS code 313210 with the Department of Defense as the contracting agency.
Broadwoven Fabric Mills

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
DIBBS
LEG IRONS
Solicitation # SPE1C1-26-T-1584
The contract pertains to the procurement of five pairs of leg irons, identified by NSN 8465-01-446-8616 and part number 703 from Peerless Handcuff Co Inc, with a unit price of $5.00 and a total value of $25.00. Delivery is required within five days of contract award, delivered FOB destination, with no variance allowed in quantity. Inspection and acceptance occur at the destination point, and packaging must comply with DLA’s master list of technical and quality requirements, superseding ASTM D3951 if applicable. All packaging and labeling must follow MIL-STD-129, and palletization must adhere to RP001 packaging standards. If the material is hazardous per Fed-Std-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging under ASTM D3951 is permitted but subordinate to DLA requirements. Shipment must be sent via the fastest traceable means, excluding parcel post, to the specified freight address in Gulfport, MS, with the RDD code 777 and project reference ZN0 TP 1. The original required delivery date is August 6, 2026, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Covered defense information applies, and all contractual obligations are governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date. The contract is issued under solicitation SPE1C1-26-T-1584, with point of contact Jennifer Scarpello at safetyprotection@dla.mil.
Apparel Accessories and Other Apparel Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
DIBBS
STRAP, INVOLUNTARY, R
Solicitation # SPE1C1-26-T-1579
This contract specifies the procurement of 2 bags of involuntary restraints with part number 8465-01-470-6253, each bag containing 10 restraints, for delivery to the Center for Security Forces Learning Site in Silverdale, Washington. The restraints must be packaged in strict accordance with MIL-STD-2073-1E, ASTM D 3951, MIL-STD-147, and MIL-STD-129, including proper marking, palletization, and hazardous material handling as defined by DLA packaging requirements. The unit of issue is the bag (BG), with a total quantity of two, and delivery is required within 20 days FOB destination, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and shipping must be conducted via traceable means, explicitly prohibiting parcel post. All packaging and marking must comply with applicable military standards, and any government identification on non-accepted supplies must be removed. The solicitation number is SPE1C1-26-T-1579, issued under the Department of Defense, with a response deadline of August 17, 2026, and a required delivery date of August 6, 2026. The contract incorporates technical and quality requirements referenced from the DLA Master List, effective on the solicitation issue date. The unit of issue conversions and procurement data align with standardized ANSI X12 codes as provided by DLA. The point of contact is Jennifer Scarpello at safetyprotection@dla.mil, with a specific freight shipping address and government-only codes for internal tracking. This procurement is governed by federal acquisition protocols and is subject to the technical specifications and compliance conditions detailed in referenced military standards, with the UI change from bag to BG effective January 1, 2026.
Apparel Accessories and Other Apparel Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details