Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SLING, ASSEMBLY

Active
SPE8EE-26-T-2252Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 26 units of SLING, ASSEMBLY with NSN 3940-01-382-9781 under solicitation SPE8EE-26-T-2252, with a delivery deadline of 167 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with compliance dictated by the master list version in effect on the solicitation issuance or award date, depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes deemed major. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with supplied hardware except in specific cases such as functional batteries, fluorescent lights, instruments, sensors, weapon systems, or NAVSEA-specified reagents, with portable fluorescent lamps and instruments requiring shockproof design and a secondary mercury containment boundary per NAVSEA 5100-003D. The item is subject to export controls under ITAR or EAR, restricting disclosure of technical data to foreign persons anywhere, including foreign national employees, and requires DFARS 252.225-7048 compliance; access is limited to DLA contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and formal DLA authorization. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and all supplies must comply with DLA packaging standards and the removal of government identification from non-accepted items. The solicitation was posted on August 5, 2026, with responses due August 17, 2026, under NAICS code 339999, and performance is designated for Tracy, California, with Philip Ferrara as the primary point of contact.

General Info

Procure 26 SLING ASSEMBLIES, NSN 3940-01-382-9781, delivery in 167 days, ITAR/EAR controlled, CMMC Level 2, zero nonconformances.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

339999 - All Other Miscellaneous ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE8EE-26-T-2252.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
View Agency Profile
Office AddressUS
Contacts
Philip Ferrara
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SLING,ASSEMBLY
SLING,ASSEMBLY
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
SPE8EE-26-T-2252
SECTION B
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3940-01-382-9781 Quantity: 26 EA Purchase Request: 7017757387QTY: 26 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339999
New
DIBBS
DRAFTING INSTRUMENT
Solicitation # SPE8E9-26-T-3303
This contract governs the procurement of drafting instruments under NSN 6675-00-641-3531, with a quantity of 64 units, pursuant to solicitation SPE8E9-26-T-3303. The technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, referenced by R-numbers such as RP001, RQ006, and RA001, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless a solicitation amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents. Portable devices containing mercury must meet shock-proof standards and include a secondary containment boundary as mandated by NAVSEA 5100-003D. The product specification deviates from CID A-A-52034 in specific ways: the center horn must be a transparent plastic disc with defined diameter and tolerance, paired with a centered rubber gasket having prescribed dimensions and protrusion, and revised nomenclature replaces obsolete classifications for protractors and triangles, now correctly identifying them as semicircular protractors and triangles with specified angles and dimensions. The contract item is procured as a fully competitive commercial item under federal specification, with delivery due 167 days after award, and is managed by the Department of Defense’s Construction & Equipment MRO Service I, with performance located in New Cumberland, Pennsylvania.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
CLIP, HEADBAND HELME
Solicitation # SPE1C1-26-T-1587
The contract pertains to the procurement of 240 units of CLIP, HEADBAND HELME with NSN 8470-01-729-3458, to be delivered FOB destination within 20 days of award, with no tolerance for quantity variance. The items must comply with MIL-STD-2073-1E packaging standards and be marked according to MIL-STD-129 and MIL-STD-147, with no special marking required. Packaging must adhere to DLA’s procurement requirements, and all units must be palletized accordingly. Delivery is directed to the USS GEORGE H W BUSH CVN 77 in Norfolk, Virginia, with shipment coordinated under DLA procedural notes C19 and C20. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date. The contract is issued under solicitation SPE1C1-26-T-1587, with a response deadline of August 17, 2026, and an original required delivery date of August 7, 2026. The item is classified under NAICS code 339999, and point of contact is Jennifer Scarpello at safetyprotection@dla.mil. Covered Defense Information provisions may apply, and government-specific identifiers are included for internal tracking and logistics use.
C AND T SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
VALVE, FIRE EXTINGUI
Solicitation # SPE8E6-26-T-4005
The contract pertains to the procurement of four fire extinguisher valves with NSN 4210-01-107-3418 under solicitation SPE8E6-26-T-4005, issued by the Department of Defense through the Albany Transportation Officer office. Delivery is required within 167 days after award, and the solicitation closed on August 17, 2026. The item is classified under NAICS code 339999 and is subject to stringent export control regulations under ITAR or EAR, meaning all technical data associated with it is restricted and cannot be disclosed to foreign persons, including foreign nationals within the U.S., without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs handling of this controlled data, and access is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been explicitly approved by DLA’s controlling authority. Additionally, the vendor must be a CMMC Level 2 certified third-party assessment organization, as the contract involves covered defense information, requiring implementation of specified cybersecurity practices to protect sensitive data.
ALBANY TRANSPORTATION OFFICER

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
SLING, ENDLESS
Solicitation # SPE8EE-26-T-2281
The contract pertains to the procurement of 13 units of an endless sling identified by NSN 3940-99-853-3232 under purchase request 7017758345, with a delivery requirement of 167 days ADO. The solicitation, issued under number SPE8EE-26-T-2281, was posted on August 5, 2026, with responses due by August 17, 2026. The acquisition falls under the NAICS code 339999 and is categorized as a federal procurement managed by the Department of Defense through the Construction & Equipment Manu & Con agency. The place of performance is specified as New Cumberland, Pennsylvania, with Philip Ferrara listed as the primary point of contact, reachable via email and phone provided. Compliance with DLA packaging requirements is mandatory, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a later amendment supersedes it. Additionally, the contract may involve covered defense information, and any non-accepted supplies must have government identification removed in accordance with prescribed protocols.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
BLOCK, TACKLE
Solicitation # SPE8EE-26-T-2219
The contract covers the procurement of 496 units of a block and tackle item under solicitation SPE8EE-26-T-2219, awarded to Royson Engineering Company with part number 1776 and NSN 3940-00-263-3041, at a unit price of $496.00 for a total value of $246,016. Delivery is required FOB origin within 73 days of award, with no tolerance for quantity variance, and must be completed by May 20, 2026, despite the original required delivery date of January 13, 2027. All items must comply strictly with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, using specific packaging methods including dry preservation and intermediate containment in E5 containers. The item must be palletized in accordance with DLA guidelines and shipped to the designated receiving warehouse in Tracy, California, with no special marking required. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the supplied hardware, except in specific exceptions such as functional mercury in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier as mandated by NAVSEA 5100-003D. The solicitation is set aside for Women-Owned Small Businesses under NAICS code 339999 and is governed by the DLA Master List of Technical and Quality Requirements with revisions effective as of the solicitation issue date; inspection and acceptance occur at the destination. The contract’s point of contact is Philip Ferrara, and all transportation details are subject to DLAD Procurement Notes C19 and C20.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
BUSHING, NONMETALLIC
Solicitation # SPE4A7-26-Q-0972
The contract is for the procurement of 325 nonmetallic bushings with NSN 5365-01-620-9298 under solicitation SPE4A7-26-Q-0972, with a response deadline of August 15, 2026, and a delivery requirement of 108 days after contract award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, regardless of location, without explicit authorization from the Department of State or Commerce. This restriction applies to all entities, including U.S. companies and their foreign subsidiaries, and extends to foreign national employees. Access to the controlled data is limited exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA. The Defense Logistics Agency enforces these controls through DFARS 252.225-7048, ensuring compliance with federal export policies. The place of performance is Hill Air Force Base, Utah, and the primary point of contact for the solicitation is Mykhara Robinson of the Department of Defense’s ASC Supplier Oper AE and AF Division, reachable via email at mykhara.robinson@dla.mil.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339999
New
DIBBS
EXTINGUISHER, FIRE
Solicitation # SPE8E6-26-T-4027
The contract pertains to the procurement of 193 portable dry chemical fire extinguishers, specifically modeled as gas cartridge type using potassium bicarbonate, each weighing 20 pounds and colored red, conforming to the Commercial Item Description for fire extinguishers and meeting MIL-STD-130N identification standards. The extinguishers are classified as hazardous under Title 49 CFR Division 2.2 as non-flammable, non-poisonous gas and must be packaged, marked, and shipped in strict compliance with MIL-STD-2073-1E and IP025 requirements for hazardous materials, with palletization and labeling governed by DLA’s RP001 packaging guidelines and MIL-STD-129 marking specifications. The contract is issued under solicitation SPE8E6-26-T-4027 with a critical application designation, full and open competition, and no quantity variance allowed. Deliveries are split into two CLINs—12 units to be delivered to the New Cumberland, Pennsylvania facility and 181 units to the San Joaquin, California facility—both FOB destination with an inspection and acceptance point at the delivery location, and a mandatory 69-day delivery window from the need ship dates of December 16, 2025 and May 26, 2026 respectively, with a final required delivery date of December 4, 2026. All technical and quality requirements are incorporated via the DLA Master List of Technical and Quality Requirements referenced by R-numbers, and the item is identified by NSN 4210-01-290-0755 and part number AA393-B2D.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
Federal
Rocket Parts
Solicitation # W911S226U3945
The U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is seeking qualified small businesses to provide rocket parts under a combined solicitation with the number W911S226U3945. This opportunity is exclusively set aside for small businesses as defined by the Small Business Administration, ensuring that only eligible small business concerns may respond. The North American Industry Classification System code is 339999, indicating it falls under miscellaneous manufacturing. The solicitation was posted on August 5, 2026, with a firm deadline for responses set for August 12, 2026, at 8:30 p.m. Eastern Time. Performance will be carried out at an unspecified location with a ZIP code of 10996, though the contracting office is located at Fort Drum, New York, 13602-5220. Primary point of contact for all inquiries is Jessica Kelley, reachable via phone at 845-938-4955 or email at jessica.l.kelley24.civ@army.mil. Interested parties must submit responses through the SAM.gov portal using the provided UI link.
W6QM Micc-Ft Drum

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339999
New
SLED
Pop-Up Stationary Infantry Targets Supply
Utah

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339999
New
DIBBS
Physical Goods Supply & Manufacturing
DEPOT HILL

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
Identification Marker Manufacturing and SupplyThe contract involves the manufacture and supply of identification markers with the NSN 7690-01-242-4556, which must have a 12-month shelf life and adhere strictly to MIL-STD-129 and MIL-STD-2073-1E for labeling and packaging requirements. These standards ensure uniformity, durability, and compatibility with military logistics systems, making compliance essential for acceptance and use across Department of Defense supply chains. The product must be produced to exact specifications to guarantee traceability, environmental resilience, and proper handling throughout its usable life. This is a subcontract opportunity posted by the Defense Logistics Agency under the NAICS code 339999, with a response deadline of August 17, 2026. The solicitation is part of broader efforts to maintain standardized identification systems for military inventory and distribution, and all offers must demonstrate the capability to meet the stringent packaging and labeling mandates. The place of performance and specific delivery locations are not detailed in the posted information, but contractors are expected to support DLA’s nationwide and potentially global logistics infrastructure. Participation requires proven experience in military-grade production and the ability to deliver consistent quality within the specified shelf life timeframe.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
Procurement of Identification Markers (NSN: 7690011686885)
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

NAICS: 333923
New
DIBBS
FRAME, HOIST
Solicitation # SPE8EE-26-T-2274
The contract pertains to the procurement of seven FRAME, HOIST units under solicitation number SPE8EE-26-T-2274, with a specified delivery timeframe of 167 days after award. The item is identified by NSN 3950-01-680-9587 and linked to purchase request 7017757573. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable references marked by R or I numbers, and the controlling revision depends on whether the acquisition is simplified or large, as defined by solicitation or amendment dates. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The contract may involve covered defense information under RD003 requirements. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026. Performance is to be delivered to New Cumberland, Pennsylvania, 17070-5002, under the Department of Defense, specifically the Construction & Equipment Manufacture and Construction organization. Primary point of contact is Philip Ferrara, reachable via email and phone listed in the contract data.
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332991
New
DIBBS
ROLLER ASSEMBLY, CON
Solicitation # SPE8EF-26-Q-0165
The contract is for the procurement of 20 roller assemblies with NSN 1730-01-245-7322 under solicitation SPE8EF-26-Q-0165, with a 60-day delivery requirement from award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the type of acquisition and applicable dates. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The contractor must be certified at CMMC Level 2 by an approved third-party assessment organization and handle covered defense information in accordance with applicable regulations. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at designated levels or AQLs. Technical data associated with this item is subject to export control under ITAR or EAR, requiring prior government authorization for disclosure or transfer, including to foreign nationals within the United States. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD training, and DLA authorization. The contract is issued by the Department of Defense, with Sharon Forde as the primary point of contact.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
NRP, LP HOSE ASSY-6A
Solicitation # SPE8EF-26-T-1589
This contract pertains to the procurement of NRP, LP HOSE ASSY-6A, identified by NSN 1730-01-655-9887 and part number 8028-080-8050-6 from PROGRESSIVE HYDRAULICS, INC., with a quantity of five units to be delivered under solicitation SPE8EF-26-T-1589. The item is classified as a TYPE I (CODE S) with a non-extendable shelf life of 60 months, as mandated by RS023, and requires compliance with DLA packaging standards under RP001 and MIL-STD-2073-1E, including specific packing methods, preservation, and marking per MIL-STD-129 with Special Marking Code 32. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The required delivery date is 167 days from contract award, with an original deadline of March 8, 2027, and a need ship date of February 1, 2027. The item must be shipped to the designated delivery address in Tracy, California, under transportation guidelines noted in DLAD Procurement Notes C19 and C20. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the version in effect on the solicitation issue date controls. The contract is subject to Covered Defense Information clauses and utilizes the DoD unit of issue, with pricing set at $5.00 per unit for a total value of $25.00.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
DIBBS
SCREEN, INTAKE COVER, WI
Solicitation # SPE8EE-26-T-2233
The contract pertains to the procurement of 27 units of a SCREEN, INTAKE COVER, WINCH with NSN 3950-01-169-8697 under solicitation SPE8EE-26-T-2233, issued by the Defense Logistics Agency. Delivery is required within 167 days after award, and the procurement falls under NAICS code 333923 for construction and equipment manufacturing. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item is subject to export controls under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—even within the United States—is prohibited without prior authorization from the Department of State or Commerce. Access to this restricted data is limited to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and formal approval from DLA. Cybersecurity requirements mandate CMMC Level 2 certification for any third-party assessment organization involved in handling the contract. All covered defense information is subject to applicable DFARS clauses, including DFARS 252.225-7048, and the point of contact for the procurement is Philip Ferrara at the Department of Defense, with performance designated at New Cumberland, PA, ZIP 17070-5002.
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
SKID, PLATFORM
Solicitation # SPE8EF-26-T-1567
The contract is for the procurement of 2,243 units of a SKID, PLATFORM identified by NSN 3990-01-484-6521 under solicitation SPE8EF-26-T-1567, with a total price of $2,243.00 per unit. Delivery is required FOB origin within 167 days of the contract award, with inspection and acceptance points both set at the destination. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with wooden pallets and containers constructed from heat-treated wood certified by an ALSC-recognized agency, marked clearly and visibly. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Oak and chestnut wood must be bark-free, square-edged, or have a moisture content of no more than 20 percent. The contractor is responsible for inspecting each shipment for compliance. Deliveries must be sent to DLA Distribution Red River in Texarkana, Texas, with an original required delivery date of February 5, 2027, and a need ship date of February 1, 2027. The unit of issue is each, with no variance allowed in quantity.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
PUMP, BUCKET, LUBRICA
Solicitation # SPE8EE-26-T-2220
The contract solicits 39 units of a hand-operated, T-handle pressure pump system designed for lubrication use, which includes a heavy-duty 3/8-inch I.D. hose between 6 to 10 feet long, a follower plate, and a container with a foot step and leakproof cover that supports the pump head. All items must comply with DLA packaging requirements and incorporate technical and quality standards from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date. The product must be marked in accordance with MIL-STD-130N for U.S. military property identification, and the contractor is required to overpack one copy of the manufacturer’s commercial manual covering operation, service, maintenance, and repair with each unit. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and unspecified attributes are treated as major with verification levels assigned accordingly. The solicitation number is SPE8EE-26-T-2220, issued August 5, 2026, with responses due by August 17, 2026, under NAICS code 333914 for construction and equipment manufacturing. Delivery is due within 167 days of award, and performance is to be completed at New Cumberland, Pennsylvania, with Philip Ferrara identified as the primary point of contact.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325211
New
DIBBS
ROLLER, MATERIAL HANDLI
Solicitation # SPE8EF-26-T-1577
The contract specifies the procurement of 16 material handling rollers identified by NSN 3990-01-588-5068 and part number 5250126, manufactured by ETNYRE & CO, with all metal structural components painted tan 686 using CARC coating, excluding plastic roller wheels and plated fasteners. The item must comply with all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, and must be packaged and labeled per MIL-STD-129 in accordance with DLA Packaging Requirements, including palletization as defined in RP001. The unit of issue is each, with a fixed quantity of 16 units and zero variance allowed. Delivery is FOB origin with inspection and acceptance occurring at destination, and the product must be shipped no later than February 1, 2027, to fulfill the original delivery requirement of January 16, 2027, within a 167-day delivery window. Packaging must align with DLA standards and be addressed to DDSP New Cumberland Facility in New Cumberland, PA, with transportation governed by DLAD Proc Note C19 and C20. The solicitation was issued under SPE8EF-26-T-1577 as a Women-Owned Small Business Set-Aside, with a response deadline of August 17, 2026, and the contract falls under NAICS code 325211 for chemical and allied products manufacturing.
Plastics Material and Resin Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
DIBBS
SLING, MULTIPLE LEG
Solicitation # SPE8EE-26-T-2264
This contract is for the procurement of three multiple-leg slings with NSN 3940-01-699-9168 and part number D3340 002 from TAYLOR DEFENSE PRODUCTS, LLC, under solicitation SPE8EE-26-T-2264. The items must be delivered FOB origin within 167 days, with no variance allowed in quantity, and are subject to inspection and acceptance at the destination warehouse in Tracy, California. All packaging must comply with ASTM D3951, but must strictly adhere to the superior requirements of the DLA Master List of Technical and Quality Requirements, including labeling per MIL-STD-129 and palletization as defined by RP001. The unit of issue is each, with a total contract value of $9.00, and the delivery must be completed by February 1, 2027, following the original required delivery date of December 13, 2026. Transportation logistics are governed by DLAD procedural notes C19 and C20, and the sole point of contact for the contract is Philip Ferrara, reachable via phone and email provided. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 333923 for construction and equipment manufacturing.
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
CRADLE, GROUND HANDL
Solicitation # SPE8EF-26-T-1556
The contract pertains to the procurement of 13 units of a cradle ground handling item identified by NSN 1730-01-362-0348 under solicitation SPE8EF-26-T-1556, with a response deadline of August 17, 2026, and a delivery requirement within 167 days of award. The item is subject to stringent DLA packaging, technical, and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date. Cybersecurity compliance is mandated at CMMC Level 2 through a self-assessment, and the contract incorporates requirements for handling Covered Defense Information. Export control restrictions apply due to technical data governed by ITAR or EAR regulations, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completion of DLA-specific training, and formal authorization. Additionally, contractors must remove any government identification from non-accepted supplies. The procurement is managed by the Department of Defense under NAICS code 336413, with performance located in New Cumberland, Pennsylvania, and primary contact information provided for Russell Keiser.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
ROPE, FIBROUS
Solicitation # SPE8EE-26-T-2229
This contract specifies the procurement of fibrous, plaited rope meeting MIL-DTL-24537A standards, with a circumference of 1.5 inches, supplied in 400-foot reels totaling 38 reels. The rope is classified as a critical item requiring source inspection and must be sourced exclusively from manufacturers or distributors listed on the Qualified Suppliers List for Manufacturers/Distributors (QSLM/QSLD) under FSC 4020; any deviation from this requirement renders a bid noncompliant and may result in criminal penalties. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the product must conform to specific packaging standards including MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Mercury or mercury-containing compounds are strictly prohibited except for defined exceptions such as batteries, fluorescent lights, and authorized instruments, with portable devices containing mercury needing shock-proof design and secondary containment per NAVSEA 5100-003D. The quality assurance protocol EQ003 applies, and for QSL-compliant suppliers, additional inspection requirements such as COQC, PVT, and ASQ H1331 are waived. Delivery is FOB origin to the recipient warehouse in Tracy, California, with a 57-day delivery window and a required ship date of August 11, 2025, despite the original delivery date being listed as December 8, 2026. The contract enforces a zero percent quantity variance, with inspection and acceptance occurring at destination, and transportation procedures are governed by DLA Procurement Notes C19 and C20.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
DIBBS
FAIRING, RESCUE HOIST, H
Solicitation # SPE8EE-26-T-2251
The contract pertains to the procurement of seven units of a fairing and rescue hoist for helicopter applications, identified by part number 42315-120 and NSN 3950-01-377-3199, supplied by Goodrich Corporation under CAGE code 3HRL4. Delivery is required in 167 days with a firm delivery date of February 1, 2028, and the items must be shipped FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the origin, and the supplier must comply with DLA’s packaging standards, which mandate adherence to MIL-STD-129 for marking and labeling, ASTM D3951 for packaging, and RP001 for DLA packaging requirements, with DLA’s Master List of Technical and Quality Requirements taking precedence over all other standards. Sampling for quality assurance must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major and acceptance requires zero non-conformances unless otherwise stipulated. The unit of issue is each, with a total contract value of $7.00 per unit, totaling $49.00, and the procurement is governed under solicitation SPE8EE-26-T-2251, issued on August 5, 2026, with a response deadline of August 17, 2026. The end destination for delivery is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation must conform to DLAD Proc Note C19 for freight and C20 for first destination. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) applies. Physical identification of the bare item must include the contractor’s name, CAGE code, and part number in accordance with RQ017. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List, with the revision in effect on the RFP issue date controlling unless amended. The product falls under NAICS code 333923 for defense equipment manufacturing and is classified as a federal acquisition under the Department of Defense.
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
COVER, AIRCRAFT ENGI
Solicitation # SPE8EF-26-T-1565
This contract pertains to the procurement of a cover for an aircraft engine, identified by part number WL19C92-2 and NSN 1730-01-367-2938, with a quantity of 41 units to be delivered FOB origin. The delivery must be completed within 247 days from the contract award, with a required ship date of April 22, 2027, and an original delivery deadline of May 19, 2027. All items must be packaged in accordance with ASTM D3951, but must fully comply with the more stringent DLA Master List of Technical and Quality Requirements, which take precedence. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The unit of issue is each, with no variance permitted in quantity delivery. Inspection and acceptance occur at the destination, and all supplies must be delivered to the specified DLA Distribution Depot in Tinker AFB, Oklahoma. The contract includes mandatory compliance with cybersecurity requirements under CMMC Level 2 Self-Assessment due to the handling of covered defense information, and all technical and quality specifications are governed by referenced R or I numbers within the DLA Master List. The solicitation, identified as SPE8EF-26-T-1565, was issued on August 5, 2026, with responses due by August 17, 2026, and is classified under NAICS code 336413 for aircraft engine and engine parts manufacturing. The contractor is required to remove any government identification from non-accepted supplies and must ensure that the delivered item is for a critical application. The point of contact for inquiries is Russell Keiser of the Defense Logistics Agency, and all transportation logistics follow DLAD procedural notes C19 and C20. The total contract value is $1,681.00 based on a unit price of $41.00 per item.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details