This Solicitation opportunity from Department Of Defense was posted on August 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
CLIP, SPRING TENSION
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract is for the procurement of 164 units of CLIP, SPRING TENSION with NSN 5340-00-893-1938 under solicitation SPE7L1-26-T-918W, issued by the Department of Defense’s Land Supply Chain. Delivery is required FOB origin within 200 days of contract award to the destination facility in Tracy, California, with inspection and acceptance occurring at that location. The item is subject to strict quality conformance requirements, mandating sampling per MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise specified; critical, major, and minor attributes must be verified at AQL levels of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Packaging must fully comply with MIL-STD-2073-1E using a cool/dry preservation method, with marking adhering to MIL-STD-129 including mandatory barcoding, and no special marking is required. Palletization follows DLA Packaging Requirements, and the item is subject to the DLA Master List of Technical and Quality Requirements. The product must conform to TDP Rev A Gen 1 based on reference drawings and TT-C-490F standards, and the manufacturer must be approved on the PRI-SAE Qualified Products List at the time of award. The use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specifications. Safety Data Sheets must be submitted pre-award, and hazardous material labeling must meet OSHA’s Hazard Communication Standard. The contract includes a range of federal acquisition regulation clauses covering small business representation, equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, and unenforceable obligations. The contractor must be SAM-registered and submit electronic proposals via DIBBS by the August 17, 2026 deadline, with invoicing to occur through WAWF. Payment terms are subject to the resulting award documentation, and the contract includes provisions for accelerated payments to small business subcontractors.
General Info
Place of Performance
REC WHSE 57, TRACY, CA, 95304-5000, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
CLIP, SPRING TENSION
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS.
THE (QPL) DOCUMENT IS PUBLISHED AND MAINTAINED
BY THE PERFORMANCE REVIEW INSTITUTE,
161 THRON HILL ROAD,WARRENDALE, PENNSYLVANIA
15086-7527. TO VIEW CONTRACTORS CURRENTLY
APPROVED BY (PRI) GO TO http://www.p-r-i.org http://www.p-r-i.org
THE MANUFACTURER FOR THE QPL ITEM MUST BE APPROVED FOR THE QPL ITEM AT THE TIME OF THE CONTRACT AWARD.
SPE7L1-26-T-918W
SECTION B
PRI-SAE QPL APPLIES.
THE PRI-SAE QPL CAN BE OBTAINED THROUGH THE
PRI-SAE WEB SITE: WWW.PRI.SAE.ORG
CLICK ON THE QUALIFIED PRODUCT LIST LINK TO
LOCATE THE APPLICABLE QPL.
PROCESS PROCEDURES AND OR WORKMANSHIP
SPECIMENS REQUIRED BY MILITARY SPECIFICATION (S)
APPLICABLE TO THIS CONTRACT WILL BE APPROVED
BY THE ACTIVITY RESPONSIBLE FOR THE
ADMINISTRATION OF THE CONTRACT. POSTAWARD
PREPRODUCTION APPROVAL VERIFYING THE
REQUIREMENTS OF MIL-DTL-16232 IS REQUIRED.
TDP Rev A Gen 1 IAW BASIC DRAWING NR 19207 10884759 REVISION NR DTD 07/26/1960 PART PIECE NUMBER: P/N 10884759
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 10884759 REVISION NR DTD 11/17/2014 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD TT-C-490F(1) REVISION NR DTD 05/19/2013 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017226060 0001 EA 164.000
NSN/MATERIAL:5340008931938
DELIVERY (IN DAYS):0200
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE7L1-26-T-918W
SECTION B
PR: 7017226060 PRLI: 0001 CONT’D
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:03/06/2027 Original Required Delivery Date:03/06/2027
SPE7L1-26-T-918W NSN/Part Number: 5340-00-893-1938 Quantity: 164 EA Purchase Request: 7017226060QTY: 164 Delivery: 200 days ADO
More opportunities from Department Of Defense → LAND SUPPLY CHAIN
Same awarding agency
Earlier notices in this NAICS code
Posted before this notice, open and closed
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 750+ contractors already using CLEATUS