Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on April 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

CLIP, UNIVERSAL, MEDI

Closed
SPE2DH-26-T-3213Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

This contract pertains to the procurement of a universal medical clip designed for surgical use, identified by NSN 6530-01-541-9123, with a quantity of 10 units to be delivered within 20 days after order. The clip is described as a general-purpose gripping, holding, and supporting device that can be sterilized and used both individually or as part of a set. Packaging must comply with commercial standards specified in the procurement document, ensuring that each unit is sealed and protected against damage during transit. Exterior shipping containers must be suitable for the mode of shipment, including export when necessary, and shipments must be labeled in accordance with Medical Marking Standard No. 1, superseding prior military standards. Technical and quality requirements referenced in the contract are governed by the Defense Logistics Agency (DLA) Master List of Technical and Quality Requirements, with the version in effect as of the solicitation issue date controlling the procurement terms. The contract mandates removal of government identification from any non-accepted supplies and emphasizes cost-efficient shipping to the delivery location at Camp Pendleton, CA. The solicitation, posted on April 20, 2026, with a response deadline of April 27, 2026, is managed by the Medical Supply Chain FSH under the Department of Defense, with Tina Vu as the primary point of contact.

General Info

Procurement of 10 universal medical clips, delivered in 20 days, meeting DLA quality and packaging standards.

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

Place of Performance

CRISTIANTOS ST BUILDING 632044, CAMP PENDLETON, CA, 92055-5225, USA

Set-Aside

NONE

Documents

1

SPE2DH-26-T-3213.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUSA

Full Description

Show more
CLIP,UNIVERSAL,MEDI
CLIP, UNIVERSAL, MEDICAL
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO contact@example.gov. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
GENERAL PURPOSE GRIPPING, HOLDING, SUPPORTING DEVICE; USED IN SURGICAL PROCEDURES TO FACILITATE SECURING A VARIETY OF OBJECTS; CAN BE STERILIZED/SANITIZED FOR USE IN STERILE PROCEDURES; IS A COMPONENT OF 6530-01-541-9138 AND IS DESIGNED TO BE USED AS PARTOF A SET OR INDIVIDUALLY
UNIT OF ISSUE EACH(EA)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6530-01-541-9123 Quantity: 10 EA Purchase Request: 7016406109QTY: 10 Delivery: 20 days ADO

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 333998
New
DIBBS
MOUNTING MEDIUM, MICROS
Solicitation # SPE2DH-27-T-0287
Solicitation SPE2DH-27-T-0287 is a small business set-aside request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of microscopy mounting medium, identified by NSN 6640-00-935-1485. The required material is a synthetic resin with a 60 percent solution of toluene or xylene, featuring a 1.52 refractive index when dry and a one-hour setting time. The unit of issue is a one-ounce bottle, which must have a shelf life of 12 months, with no more than two months elapsed from the date of manufacture to the date of delivery. Delivery is required within 69 days after order, with the destination specified as the USA Med Materiel Ctr Kore. The contractor must adhere to strict packaging and marking standards, specifically Medical Marking Standard No. 1, which supersedes MIL-STD-129, and MIL-STD-2073-1E. Labels must include the NSN, manufacturer and CAGE code, contract or lot number, and relevant dates of manufacture or expiration. Because the material is hazardous, the contractor must comply with 49 CFR, 29 CFR, and the Hazard Communication Standard, providing a signed certification of package configuration on the DD Form 250. Additionally, the contract incorporates cybersecurity requirements via DFARS 252.204-7012 and requires the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must submit their quotations by November 3, 2026, and provide a complete data package if proposing alternate parts.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS