Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CLIP

Active
SPE7M2-26-T-6303Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7M2-26-T-6303, issued by the Department of Defense Nuclear Reactor Program, is for the procurement of 16 units of a specific clip, identified by NSN 5342-01-118-8758 and part number 12384B18 from Curtiss-Wright Electro-Mechanical. The contract is valued at 256.00 dollars, with a delivery timeframe of 168 days. Delivery is set as FOB Origin, with the destination and point of inspection and acceptance located at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to quality and safety standards, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking and labeling. Packaging must comply with MIL-STD-2073-1E and RP001. A critical requirement is the prohibition of mercury or mercury-containing compounds in the hardware and packaging, with limited exceptions for specific functional components. Additionally, the contractor must comply with NIST SP 800-171 for safeguarding covered defense information and report cyber incidents via the Supplier Performance Risk System. Invoicing must be processed electronically through the Wide Area WorkFlow system.

General Info

DoD procurement of 16 clips (NSN 5342011188758) due by April 13, 2027.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE7M2-26-T-6303 for DLA Nuclear Reactor Program

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUSA
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLIP
CLIP
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
CURTISS-WRIGHT ELECTRO-MECHANICAL 0UBG9 P/N 12384B18
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M2-26-T-6303
SECTION B
PR: 7017912855 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017912855 0001 EA 16.000
NSN/MATERIAL:5342011188758
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:A1 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/12/2027 Original Required Delivery Date:04/13/2027
SPE7M2-26-T-6303 NSN/Part Number: 5342-01-118-8758 Quantity: 16 EA Purchase Request: 7017912855QTY: 16 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332994
New
DIBBS
HOUSING, FEEDER-DELI
Solicitation # SPE7L7-26-T-4799
This contract, identified as SPE7L7-26-T-4799, is for the procurement of two units of Housing, Feeder-Deli (NSN 1005014776396) for the Department of Defense. The order is managed by the DDSP New Cumberland Facility with a required delivery date of February 3, 2027. The contract specifies a delivery timeframe of 168 days and requires shipping FOB Origin to the New Cumberland, Pennsylvania facility. The agreement includes strict technical and quality mandates, including demilitarization requirements for small arms weapons and parts, as well as CMMC Level 2 self-assessment for cybersecurity. Packaging must adhere to ASTM D3951 and MIL-STD-129, and the contractor must ensure that no mercury or mercury-containing compounds are intentionally added to the hardware. Surplus items are explicitly deemed unacceptable for this specific national stock number.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332994
New
DIBBS
BRACKET, PIVOT, RIGHT
Solicitation # SPE4A7-26-T-684L
This contract is for the procurement of five right pivot brackets, identified by NSN 5342-01-143-4378 and part number 00100H16665. The order is issued by the Department of Defense through the ASC Supplier OE and AF Division, with a required delivery date of February 27, 2027, and a delivery timeline of 169 days after the order. The items are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. The agreement mandates strict adherence to DLA technical and quality requirements, including CMMC Level 2 self-assessment and specific packaging standards under MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or packaging. Quality assurance will be managed via sampling methods consistent with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332994
New
DIBBS
MOUNT, RESILIENT, WEAPON
Solicitation # SPE7M1-26-U-5123
Solicitation SPE7M1-26-U-5123 is a total small business set-aside issued by DLA Land and Maritime for the procurement of 80 estimated units of a Resilient Weapon System Mount (NSN 5342013323584). This indefinite-quantity contract, with a maximum value of 350,000 dollars, includes a guaranteed minimum quantity of 8 units. The items are identified as Type I Code S with a non-extendable shelf life of 60 months. Delivery is required within 41 days after order, with offers submitted based on FOB Origin under the First Destination Transportation program. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. All payment requests and receiving reports must be processed electronically through the Wide Area Workflow system. The procurement is governed by various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and specific requirements for hazardous material labeling and safeguarding covered defense information.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332994
New
DIBBS
ANODE, CORROSION PRE
Solicitation # SPE4A7-26-T-684S
DLA Aviation is soliciting quotes for the procurement of three corrosion prevention anodes under NSN 5342014988278. This combined solicitation, numbered SPE4A726T684S, is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 332994. The items are to be delivered to DLA Distribution within 169 days after the order is placed. Approved sources include specific parts from 6Y128 and 96169. All responsible sources may submit electronic quotes by the deadline of August 28, 2026. The solicitation is available exclusively online via the provided link, as hard copies and separate technical drawings are not available.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332994
New
DIBBS
MOUNT, RESILIENT, WEAPON
Solicitation # SPE4A7-26-T-672P
This contract is for the procurement of 146 units of a resilient weapon system mount, identified by NSN 5342-00-078-5593. The item is classified as a commercial critical application item with a non-extendable shelf life of 60 months. The procurement is managed by the Department of Defense under solicitation number SPE4A7-26-T-672P, with the primary delivery destination being the DLA Distribution Depot at Tinker AFB, Oklahoma. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging, marking, and documentation standards such as MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be conducted via sampling methods aligned with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Delivery is required within 28 days after receipt of the order, with a required delivery date of February 24, 2027.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332994
New
DIBBS
ANODE, CORROSION PREVEN
Solicitation # SPE4A7-26-T-684V
DLA Aviation is soliciting quotes for the procurement of 10 corrosion prevention anodes under NSN 5342014988282. This request for quote, identified by solicitation number SPE4A726T684V, requires delivery to DLA Distribution within 169 days after the order is placed. Approved sources for this item include specific parts from 6Y128 and 96169. All responsible sources are invited to submit electronic quotes by the deadline of August 28, 2026. The solicitation is available exclusively online, and no hard copies, specifications, plans, or drawings are provided. Inquiries should be directed to the buyer via the DIBBS portal or the provided contact email.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332994
New
DIBBS
LATCH, AMMUNITION COMPA
Solicitation # SPE4A7-26-T-673Y
This solicitation from the Department of Defense, specifically the ASC Supplier OE and AF Div, is for the procurement of 26 ammunition compartment latches under NSN 5342-01-224-7788. The contract requires delivery within 171 days after receipt of order and is categorized under NAICS code 332994. Performance is designated for New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality requirements, including DLA packaging standards and inspection and acceptance at origin. Notably, the contract involves covered defense information and technical data subject to ITAR and EAR export controls. Access to this data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332994
New
Federal
Evike Airsoft Rifles
Solicitation # W912LP26Q3008
The Department of Defense, specifically the W7M8 Uspfo Activity Ia Arng, is seeking proposals for the procurement of Evike Airsoft Rifles under solicitation number W912LP26Q3008. This combined contract opportunity is categorized under NAICS code 332994 and is open to all qualified bidders as there is no specific set-aside designated for this requirement. The solicitation was posted on August 25, 2026, with a response deadline of August 28, 2026, at 5:00 PM. The place of performance is located in Johnston, Iowa. Primary coordination for this effort is managed by Kelsey Letcher, with Kelly Burk serving as the secondary point of contact.
W7M8 Uspfo Activity Ia Arng

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332994
New
DIBBS
10--HOUSING,MACHINE GUN
Solicitation # SPE7L1-26-U-0644
This contract is for the procurement of two machine gun housings, identified by NSN 1005-01-552-3907 and part number DMG0900A from Dillon Aero, Inc. The item is designated as a critical application item and a defense article subject to the International Traffic in Arms Regulations and the Arms Export Control Act, requiring the manufacturer or exporter to be registered with the Directorate of Defense Trade Controls. Delivery is required within 139 days from the order date, with shipping handled FOB Origin and inspection and acceptance occurring at the destination. The agreement includes several strict technical and quality requirements, including CMMC Level 2 self-assessment, supply chain traceability documentation, and specific demilitarization standards for small arms parts. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Additionally, the contract specifies that surplus items are not acceptable and requires the removal of government identification from any non-accepted supplies.
LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332994
New
Federal
SWIVEL, QUICK RELEAS NSN 1005-01-529-9309
Solicitation # CL25346010
The Department of Defense, through DLA Land And Maritime, is conducting market research to identify potential manufacturers for a Quick Release Swivel under NSN 1005-01-529-9309. This is a sources-sought notice rather than a formal Request for Proposal, intended to find capable vendors interested in a future long-term contract solicitation. Currently, Grovtec US Inc is listed as an approved source with part number 11822202-GOV. Interested parties must complete a Market Research Questionnaire and submit it to Contract Specialist Major Joseph Jones by September 4, 2026. Technical drawings for the item are available via TDMT using reference number MR015299309. The requirement falls under NAICS code 332994 and is managed by the office located in Columbus, Ohio, with the place of performance situated in New Cumberland, Pennsylvania.
DLA Land And Maritime

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332994
New
Federal
Intent to Sole Source
Solicitation # 1176395
The Department of Agriculture, specifically the Csa East 6 Usda-Fs office, has issued an intent to sole source for the procurement of replacement barrels for the agency's standard-issue FN rifle platform. This acquisition is intended to ensure that law enforcement personnel have properly functioning duty rifles by utilizing manufacturer-matched FN components, which are required for compatibility, safety, and compliance with agency armorer specifications. The procurement does not involve the replacement or modification of the rifles' serialized components. Solicitation number 1176395 was posted on August 28, 2026, with a response deadline of September 4, 2026. The contract falls under NAICS code 332994 and is not subject to any set-aside restrictions. The place of performance is located in Brunswick, Georgia, and the primary point of contact for this action is Mikaela Laney.
Csa East 6 Usda-Fs

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332994
New
Federal
GUN CONTROL UNIT,EF
Solicitation # SPRMM126QGF19
This solicitation is for the manufacture and supply of the Gun Control Unit, EF, under the authority of DLA Mechanicsburg. The contract requires strict adherence to quality assurance standards, including physical identification per MIL-STD-130 and packaging according to MIL-STD 2073. All invoices and receiving reports must be submitted electronically through the PIEE-WAWF system. Key requirements include a 60-day quote validity and the mandatory disclosure of the Original Equipment Manufacturer and CAGE code if the offeror is a distributor. Any changes to production facilities require written approval from the Contracting Officer and a price reduction of 250 dollars to cover administrative costs. The government reserves the right to perform inspections at the source to ensure all supplies conform to the specified design and technical requirements.
SPRMM1 DLA Mechanicsburg

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 333310
New
DIBBS
BOX CONNECTOR, ELECTRIC
Solicitation # SPE7M2-26-T-6306
This contract, identified as SPE7M2-26-T-6306, is for the procurement of 15 electrical box connectors and fiber connector sets, specifically part number 11401-101 from U.S. Pioneer, L.L.C. The items are classified as critical application components and must adhere to the technical data package Revision B Gen 2 and reference drawing 13873 RE-014681308. Delivery is required within 168 days, with a need ship date of February 12, 2027, and a final required delivery date of April 18, 2027. The goods are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict compliance with several defense standards, including CMMC Level 2 self-assessment, DLA packaging requirements, and MIL-STD-129 for marking. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contractor must ensure that no mercury is intentionally added to the hardware, except where specifically allowed by NAVSEA. Additionally, the contract requires adherence to the most current amendments of all applicable drawings and military specifications, with inspection and acceptance occurring at the origin.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335131
New
DIBBS
LENS, LIGHT
Solicitation # SPE7M2-26-T-6294
Solicitation SPE7M2-26-T-6294 is a procurement request from the Department of Defense Nuclear Reactor Program for 268 units of light lenses (NSN 6210001515358). The contract is valued at 584.24 dollars, with a unit price of 2.18 dollars. Deliveries are required by March 17, 2027, with a lead time of 168 days after receipt of order. The items are to be delivered FOB Origin to DLA Distribution Warner Robins in Georgia. The procurement is subject to strict quality and technical standards, including MIL-DTL-3661/35A and MIL-DTL-3661E. Quality assurance is managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must follow RP001 and IP046 requirements. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds unless specified for functional use. Administrative requirements mandate the use of the Wide Area WorkFlow (WAWF) system for all invoicing and payment requests. The contractor must adhere to various FAR and DFARS clauses, including cybersecurity protections under NIST SP 800-171, prohibitions on covered telecommunications equipment, and hazardous material labeling standards. Proposals were required to be submitted electronically via the DLA Internet Bid Board System (DIBBS) by August 27, 2026.
Residential Electric Lighting Fixture Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M2-26-T-6268
Solicitation SPE7M2-26-T-6268, issued by the Department of Defense Nuclear Reactor Program through DLA Land and Maritime, is for the procurement of 13 rotary switches (NSN 5930-01-708-3928). The items must conform to the source-controlled drawing 06RP6 16-ABN182 Revision E and the specifications of Cole Instrument Corp part number 3654-103-03LP. The contract requires strict adherence to mercury-free mandates per NAVSEA 5100-003D and specifies that the items be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The need ship date is February 10, 2027, with an original required delivery date of June 4, 2027. Technical compliance is mandatory, with packaging and marking governed by MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-28786. Invoicing must be processed electronically via the Wide Area WorkFlow (WAWF) system. The solicitation includes various federal and defense clauses, including NIST SP 800-171 cybersecurity requirements and DFARS 252.223-7001 for hazard warning labels and Safety Data Sheets. Proposals must be submitted electronically through the DIBBS portal by August 27, 2026. Inspection and acceptance will take place at the destination.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334417
New
DIBBS
COVER, FIBER OPTIC C
Solicitation # SPE7M2-26-T-6266
This contract is for the procurement of 285 fiber optic connector covers, identified by NSN 6060-01-516-4050 and part number M28876/15BC. The items are designated as critical application items and must comply with MIL-PRF-28876/15F and MIL-PRF-28876F specifications. The procurement is subject to the Qualified Products List or Qualified Manufacturers List and requires adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Key restrictions include a prohibition on the use of Class I ozone-depleting substances and a general ban on the intentional addition of mercury or mercury-containing compounds, with specific exceptions for functional components. Delivery is set for 166 days after receipt of order, with a required delivery date of April 11, 2027. The shipment is FOB Origin and will be delivered to the DLA Distribution New Cumberland facility in Pennsylvania.
Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335929
New
DIBBS
CABLE, POWER, ELECTRICAL
Solicitation # SPE7M2-26-Q-0788
This contract, solicitation number SPE7M2-26-Q-0788, is for the procurement of electrical power cable under NSN 6145-01-461-7192. The requirement consists of two line items, each for 150 feet of cable, totaling 300 feet. The pricing is set as Firm Fixed Price with a zero percent quantity variance. Delivery is required within 100 days after the order is placed, with a specified ship date of July 28, 2026. The materials must adhere to NEMA-WC27500 standards and be provided in continuous lengths as indicated by advice code 28. Strict environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Inspection and acceptance will take place at the destination in Mechanicsburg, Pennsylvania.
Other Communication and Energy Wire Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M2-26-T-6270
Solicitation SPE7M2-26-T-6270, issued by the Department of Defense Nuclear Reactor Program via DLA Land and Maritime, is for the procurement of 53 electrical plug connectors (NSN 5935011118953). The requirement specifies compliance with Technical Data Packages Rev B Gen 2 and standards SAE AS50151 and SAE AS34061. This is a qualified item requiring adherence to the Qualified Products List (QPL) for Federal Stock Class 5935. The total estimated value is 53.00 dollars, with a delivery window of 165 days from issuance. The need ship date is February 9, 2027, with an original required delivery date of May 17, 2027. The contract is delivered FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-55330. Special prohibitions are in place against the intentional addition of mercury compounds per NAVSEA 5100-003D. Administrative requirements include mandatory electronic invoicing through Wide Area WorkFlow (WAWF) and compliance with NIST SP 800-171 cybersecurity standards. Proposals were due by August 27, 2026, via the DIBBS portal.
Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335999
New
DIBBS
HANGER, CABLE
Solicitation # SPE7M2-26-T-6302
This contract is for the procurement of cable hangers under solicitation SPE7M2-26-T-6302 for the Department of Defense Nuclear Reactor Program. The order consists of 40 units of issue, defined as packages of 10 each, for a total of 400 hangers. The items are identified by NSN 5975010209187 and must be delivered to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of February 23, 2027. The agreement mandates strict adherence to DLA packaging, marking, and shipping requirements, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, and the contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds except where functionally required. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335929
New
DIBBS
CABLE, POWER, ELECTRI
Solicitation # SPE7M2-26-T-6273
This contract is for the procurement of 43,000 feet of special purpose electrical power cable, identified by NSN 6145-01-071-0117 and part number M27500-24RC2S09. The material must be supplied in 500 foot spools and adhere to MIL-DTL-12000 and NEMA WC 27500-2025 standards. Delivery is required within 165 days, with a quantity variance allowed of plus or minus 5 percent. The item is designated as a critical application item and must be delivered FOB Origin to DLA Distribution Warner Robins. The agreement mandates strict compliance with DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. It prohibits the intentional addition of mercury or the use of Class I ozone-depleting substances unless written approval is granted. Quality assurance will be conducted at the destination using sampling methods aligned with MIL-STD-1916 or ASQ H1331. This is a total small business set-aside procurement under the Department of Defense Nuclear Reactor Program.
Other Communication and Energy Wire Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332510
New
DIBBS
HUB, BODY
Solicitation # SPE7M2-26-R-0016
The contract pertains to the procurement of a Hub Body (NSN 5340-01-666-9621), a critical application item for Aircraft Launch and Recovery Equipment (ALRE), with strict sourcing, traceability, and quality mandates. Only approved sources, as designated by NAWC Airborne Division Lakehurst and verified through NAVICP Philadelphia’s Source Approval Information Brochure, are eligible to respond, and all offerings must originate from an approved manufacturer. Serialization is mandatory for traceability of all parts, including scrap material generated during production, and re-branding that obscures original OEM markings such as part number, serial number, or CAGE code is strictly prohibited. Marking requirements align with MIL-STD-129, requiring each unit pack to display lot and serial numbers, contractor and manufacturer CAGE codes, and part number, while bare items must be marked with contract number, NAWC CAGE, and part number, superseding any conflicting instruction on drawings. The item must comply with NAVAIR ALRE traceability standards and is subject to a comprehensive set of technical and quality requirements, including SAE AS9100 certification, Non-Destructive Testing (NDT) accreditation, and adherence to CMMC Level 2 cybersecurity standards, with no authorization for the Certificate of Conformance clause. The contractor must submit multiple Contract Data Requirements Lists (CDRLs), including First Article Testing Reports, Welding Procedure Qualifications, and Welder Performance Certifications, confirming production compliance. Mercury and ozone-depleting chemicals are banned from incorporation unless explicitly exempted, with exceptions such as portable fluorescent lamps requiring secondary containment per NAVSEA 5100-003D. Items must be shipped FOB Destination to San Diego, California, and packaging must comply with DLA and MIL-STD-2073-1E standards. A 200% quantity option is available, bringing the maximum potential order to 60 units, and all deviations or waivers must be submitted for approval by the DSC Contracting Officer. Offerors are required to maintain active SAM registration, provide unredacted commercial sales history, and adhere to all technical data package revisions referenced in the document, with solicitation responses due by July 30, 2026, through the DLA eProcurement portal.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332911
New
DIBBS
VALVE, GLOBE
Solicitation # SPE7M2-26-T-6293
This contract is for the procurement of 14 globe valves under solicitation number SPE7M2-26-T-6293 for the Department of Defense Nuclear Reactor Program. The items are identified by NSN 4820000706921 and are designated as critical application items. Approved manufacturers and part numbers include Admiral Valve LLC, BEC Systems LLC, and Derbyshire Marine Products LLC. Delivery is required within 168 days, with a need ship date of February 12, 2027, and a final delivery date of April 10, 2027. The contract mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. There is a strict prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. All bare items must be marked with the contract number, NAWC CAGE, and part number in accordance with technical data drawings. Shipping and delivery are set as FOB Origin, with inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335921
New
DIBBS
CABLE ASSEMBLY, FIBE
Solicitation # SPE7M2-26-T-6310
This contract is for the procurement of eight fiber optic cable assemblies, identified by NSN 6020-01-691-8610 and part number 43-180-2 from Naval Power Systems Inc. The agreement specifies a delivery timeframe of 168 days, with a required delivery date of June 22, 2027, and a need ship date of February 12, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions are highlighted, prohibiting the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting substances during design, manufacturing, or testing unless written approval is granted by the contracting officer. Technical and quality requirements are governed by the DLA Master List, and the contract allows for no quantity variance.
Fiber Optic Cable Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 561210
New
DIBBS
Packaging and Labeling Compliance
Facilities Support Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details