Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Clutch Disk and Plate Supply for Vehicular Applications

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply of vehicular clutch disks and plates designated by NSN 2520001690258, encompassing all necessary packaging, labeling, and delivery requirements to DLA New Cumberland in Pennsylvania with zip code 17070-5002. The work falls under NAICS code 336370, indicating automotive component manufacturing, and is structured as a subcontract with no set-aside provisions. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. The performing agency is the Department of Defense under the organization name LAND SUPPLIER OPNS VEHICLE SPT, and delivery must be completed at the specified DLA location to meet contractual obligations.

General Info

Supply clutch disks and plates to DLA New Cumberland by August 10, 2026, under DoD subcontract.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

336370 - Motor Vehicle Metal StampingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of vehicular clutch disks and plates (NSN: 2520001690258), including packaging, labeling, and delivery to DLA New Cumberland, PA.

Similar Contracts

Same NAICS industry code

NAICS: 336370
New
SLED
Vehicle Configuration and Trim SupplyThe contract specifies the supply of active X interior trim and associated components tailored for the Ford Explorer, requiring all parts to meet original equipment manufacturer specifications to ensure compliance with the premium trim level standards. The vendor must deliver components that align precisely with Ford’s design, quality, and performance benchmarks without deviation, ensuring seamless integration into the vehicle’s interior architecture. The solicitation is classified as a subcontract under NAICS code 336370, issued by Cherokee Nation with a response deadline of August 4, 2026, and was posted on July 30, 2026. While details regarding place of performance and point of contact are not provided, the procurement is open to qualified suppliers capable of meeting stringent OEM requirements, with no set-aside restrictions indicated. Participation requires adherence to technical and quality protocols specified for the Ford Explorer’s premium interior configuration.
Cherokee Nation

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336370
New
DIBBS
Supply of Windshield Wiper Blade (NSN 2540014554890)The contract entails the supply of a single commercial windshield wiper blade with part number 6V6543 and national stock number 2540014554890, fully compliant with Defense Logistics Agency standards and delivery specifications. The item requires no assembly, installation, or customization, and must meet all technical and procedural requirements set forth by the Department of Defense. The contract is classified as a subcontract under NAICS code 336370, which corresponds to automotive parts and accessories manufacturing. It was posted on July 29, 2026, and is administered by the Defense Logistics Agency. Performance and delivery are subject to DLA mandates, though specific location details for place of performance or office address are not provided. The contract is accessible via the DIBBS portal using the referenced award and delivery identifiers.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 336370
New
DIBBS
BUMPER, VEHICULAR
Solicitation # SPE7L4-26-T-5856
The contract pertains to the procurement of a single vehicular bumper assembly identified by NSN 2540-01-411-4863 under solicitation SPE7L4-26-T-5856, with a delivery deadline of 251 days after order. The requirement is subject to stringent technical and quality controls outlined in the DLA Master List of Technical and Quality Requirements, with specific referenced clauses governing configuration change management, inspection and acceptance at the manufacturer’s origin, and the removal of government identification from non-accepted items. The item includes components governed by Qualified Products Lists or Qualified Manufacturers Lists, mandating compliance with specified qualification criteria. Export control restrictions apply due to technical data subject to ITAR or EAR, requiring contractors to hold approved US/Canada Joint Certification Program credentials, complete mandatory DOD export control training, and obtain prior authorization from DLA to access or handle such data. Cybersecurity compliance is enforced through CMMC Level 2 certification for third-party assessors, and the contract incorporates covered defense information protections. The procurement is managed by the Department of Defense’s LSO Combat Vehicles and Armament office, with performance location in Tracy, California, and primary point of contact provided for inquiries.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 336370
New
International
Brake Shoe Supply (NSN 5930-00-798-4784 / Part No: 11007849-020)The contract solicits the supply of a single brake shoe unit designated by NSN 5930-00-798-4784 and part number 11007849-020 for use in armament loader systems, with strict requirements for full traceability throughout the manufacturing and delivery process. The item must be properly packaged and fully compliant with all applicable shelf life standards at the time of delivery to ensure operational readiness and longevity in storage. The solicitation is issued as a subcontract under the NAICS code 336370, relating to defense vehicle manufacturing, and is managed by the Department of National Defence on behalf of the Government of Canada. Performance is expected to be delivered to locations in Alberta and Quebec, excluding the National Capital Region, with no set-aside provisions specified. Responses are due by September 9, 2026, and the opportunity was posted on July 27, 2026. Although no point of contact or specific office address is provided, the tender can be accessed via the Canada Buys portal for full details and submission instructions. The contract emphasizes adherence to military-grade specifications and logistical compliance, targeting suppliers capable of meeting stringent defense procurement standards for critical components. Timing and documentation integrity are paramount to fulfill the requirements of the Canadian Armed Forces' maintenance and deployment schedules.
Department of National Defence

POSTED

5 days ago

DEADLINE

in about 1 month
View Details
NAICS: 336370
New
DIBBS
Manufacture of Air Breathing HoseThe contract mandates the production of 110 units of military-specification air breathing hose classified as a critical application item, demanding adherence to rigorous quality control standards and full compliance with MIL-STD-1916 for quality assurance, MIL-STD-129 for military labeling, and MIL-STD-2073-1E for packaging and preservation. The work is to be performed at San Diego, California, with a performance location zip code of 92136-3581, and falls under NAICS code 336370 for aircraft and parts manufacturing. The subcontract is issued by the Fluid Handling Division of the Department of Defense and requires a formal response no later than August 6, 2026, following its posting on July 26, 2026. All delivered units must meet exacting military performance, labeling, and packaging specifications to ensure readiness for operational use.
FLUID HANDLING DIVISION

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 336370
New
DIBBS
Windshield Wiper Blade SupplyThe contract seeks the supply of a single military-spec windshield wiper blade with NSN 2090-01-700-1318 and part number CC-52412, designed to meet Department of Defense logistics standards and perform under rigorous operational conditions. This item is classified under NAICS code 336370, indicating its alignment with the automotive parts manufacturing sector, and is being procured as a subcontract under the Fluid Handling Division of the Department of Defense. The requirement is tied to performance at Lewis McChord with zip code 98433-0000, ensuring the delivered product supports specific military vehicle systems in that location. The solicitation was posted on July 26, 2026, with a response deadline set for August 6, 2026, giving potential suppliers a limited window to submit proposals that fully comply with technical and logistical specifications. The contract is accessible through the DIBBS portal, confirming its formal status within the defense acquisition framework.
FLUID HANDLING DIVISION

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 336370
DIBBS
Windshield Wiper Blade SupplyThe contract requires the manufacture or supply of 842 units of windshield wiper blades designated by NSN 2540015935873, all of which must meet established military specifications for performance, durability, and reliability. Compliance with strict packaging and labeling standards is mandatory to ensure proper identification, handling, and integration into military vehicle systems. The procurement is classified as a subcontract under NAICS code 336370, indicating it pertains to automotive parts manufacturing, and is being managed by the LSO COMBAT VEHICLES AND ARMAMENT office under the Department of Defense. The place of performance is designated as Hill AFB, Utah, with a zip code of 84056-5734, suggesting final delivery and potential inspection will occur at this location. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, giving interested parties just over a week to submit proposals. The contract opportunity is accessible through the DIBBS platform, and while no set-aside type is specified, full compliance with defense contracting requirements remains obligatory.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

9 days ago

DEADLINE

in 2 days
View Details
NAICS: 336370
DIBBS
Supply of Universal Joint Yokes for Vehicular ApplicationsThe contract seeks the supply of 21 universal joint yokes designed for integration into vehicular drive shaft assemblies to enable the transmission of torque between rotating shafts operating at variable angles. These components are critical for reliable power transfer in military-grade wheeled vehicles and must meet stringent performance and durability standards expected in rugged operational environments. The procurement is classified as a subcontract under NAICS code 336370, indicating it falls within the automotive parts manufacturing sector, and is managed by the Department of Defense through its Land Supplier Operations branch. The solicitation was posted on July 23, 2026, with a firm response deadline of August 3, 2026. Performance of the contract is obligated to take place in Texarkana, Texas, with a ZIP code of 75507-5000. Although no set-aside classification or point of contact information is provided, the contract is accessible via the DIBBS platform for qualified suppliers to review requirements and submit proposals. All units delivered must comply with technical specifications to ensure seamless compatibility and operational safety within deployed vehicular systems.
LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

9 days ago

DEADLINE

in 2 days
View Details
NAICS: 336370
DIBBS
Automotive Trim Component ManufacturingThe contract entails the manufacture and supply of 18 units of automotive bezels identified by NSN 2590016104276, fully compliant with military specifications for design, performance, and quality. Each unit must adhere to strict packaging and labeling standards to ensure traceability and readiness for military use, with all deliveries required to meet defined logistical timelines. The work is classified as a subcontract under NAICS code 336370, indicating it falls within the automotive body and trim manufacturing sector, and is managed by the Department of Defense under the organizational name LAND SUPPLIER OPNS VEHICLE SPT. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the final delivery or inspection must occur. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, leaving a limited window for qualified suppliers to submit proposals. All parties involved must align with federal procurement protocols and military-grade manufacturing standards throughout the production and delivery cycle.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

9 days ago

DEADLINE

in 2 days
View Details
NAICS: 336370
DIBBS
Windshield Wiper Assembly SupplyThe contract seeks the supply of three fully assembled military-spec windshield wiper units, requiring full compliance with all technical and operational standards for military use. Packaging, labeling, and delivery must meet stringent military requirements, ensuring the units are protected, properly identified, and delivered in timely condition. The solicitation is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, as indicated by the SDVOSBC designation, ensuring priority consideration for eligible firms. The North American Industry Classification System code 336370 applies, categorizing the work within the automotive component manufacturing sector. Performance of the contract is located at New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the awarding agency is the Fluid Handling Division under the Department of Defense. The opportunity was posted on July 23, 2026, with responses due by August 3, 2026, providing a narrow window for qualified vendors to submit proposals under this subcontract opportunity.
FLUID HANDLING DIVISION

POSTED

9 days ago

DEADLINE

in 2 days
View Details
NAICS: 336370
DIBBS
BOX, ACCESSORIES STOWAG
Solicitation # SPE7L4-26-T-5813
This contract pertains to the procurement of Box, Accessories Stowage, with a total quantity of eight units to be delivered under solicitation SPE7L4-26-T-5813, issued by the Department of Defense through the Defense Logistics Agency. The items must comply with stringent technical, packaging, and quality requirements outlined in referenced standards including MIL-STD-1916 and MIL-STD-2073-1E, with sampling and inspection protocols mandating zero non-conformances unless otherwise specified. Packaging must adhere to MIL-STD-129 for marking and DLA packaging guidelines, with no hazardous materials permitted and all components sourced from qualified manufacturers as defined by QPL/QML lists. The product incorporates specialty metals, triggering compliance with DFARS clauses 252.225-7008, 252.225-7009, and 252.225-7010, and requires a Certificate of Conformance. Ozone-depleting chemicals are strictly prohibited, and any substitute materials must be approved in advance. Technical data packages reference multiple drawings dated between 1962 and 2020, ensuring configuration control and engineering change management. Delivery is split across two CLINs, each for four units, with FOB origin terms and inspection and acceptance occurring at the point of origin. The first shipment is due by July 23, 2026, with the second by May 5, 2027, and both must meet the original required delivery date of February 1, 2027. Units are to be shipped to two distinct DLA distribution facilities in Tracy, California, and New Cumberland, Pennsylvania, with detailed parcel and freight address information provided.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

9 days ago

DEADLINE

in 3 days
View Details
NAICS: 336370
DIBBS
BUMPER, VEHICULAR
Solicitation # SPE7L3-26-T-133P
This contract specifies the procurement of a vehicular bumper under NSN 2540-01-522-6155 with a total quantity of two units, delivered FOB origin within 244 days. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The item is subject to stringent quality controls including tailored higher-level contract quality requirements, configuration change management via engineering change proposals, and inspection and acceptance at origin. Full and open competition applies, and the use of ozone-depleting chemicals is strictly prohibited. The bumper must comply with MIL-STD-129 marking standards, MIL-STD-2073-1E packaging requirements, and specialized packaging instructions dated June 30, 2021, with palletization aligned to DLA packaging protocols. A first article test is mandatory with one unit designated for testing, and a certificate of conformance is required. The item contains specialty metals triggering DFARS clauses 252.225-7008, 252.225-7009, and 252.225-7010, and sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. Qualified Products Lists or Qualified Manufacturers Lists apply to any components governed by referenced specifications. The contract mandates government source inspection regardless of whether the first article test is invoked, and all deliveries must be routed to DLA Distribution at New Cumberland, Pennsylvania.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

9 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-U-0634
This contract, issued by the Defense Logistics Agency under solicitation number SPE7L3-26-U-0634, is a small business set-aside for the procurement of a gasket with National Stock Number 5330007954086, intended for delivery under an indefinite-delivery contract structure with a guaranteed minimum of 27 units and a ceiling value of $350,000. The item is required in a quantity of 181 units, with delivery due 116 days after award, delivered FOB origin, and subject to zero variance in quantity. The gasket must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and the use of asbestos as defined in FED-STD-313 is strictly prohibited. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, requiring medium-duty, waterproof, greaseproof, and opaque bagging specifically designed to protect against ultraviolet degradation for items under Federal Supply Classes 5330 and 5331. Marking and labeling must follow MIL-STD-129, including proper 2D barcode application for automated processing, with no special marking required beyond standard identification. Preservation is controlled through dry, temperature-regulated storage with no additional preservation or cushioning materials applied. Palletization must conform to DLA’s RP001 packaging requirements, and all hazardous materials must be identified and labeled in compliance with 29 CFR 1910.1200 and MIL-STD-129, with applicable hazard warning data submitted for approval if not governed by other federal statutes. Inspection and acceptance occur at the destination, with the government retaining authority to reject noncompliant items. Contract administration is governed by FAR and DFARS clauses mandating compliance with small business representations, employment eligibility verification, trafficking in persons prevention, sustainable product requirements, cyber security standards including NIST SP 800-171 and safeguarding covered defense information, and electronic invoicing through WAWF. Payment and accounting information will be finalized upon award, and all proposals must be submitted electronically via the DLA-BSM Internet Bid Board System by the July 31, 2026 deadline.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
SEAL KIT
Solicitation # SPE7L3-26-Q-1249
The contract is for a Seal Kit identified by NSN 5330-01-178-6210 and part number SPE7L3-26-Q-1249, with a fixed quantity of 124 kits delivered under a firm fixed price arrangement and no variance allowed in quantity. Delivery is required within 90 days after award, with inspection and acceptance occurring at the destination point under FOB origin terms. Packaging must comply with MIL-STD-2073-1E Appendix D for kits and MIL-STD-129 for marking, with no special marking required; preservation and packaging methods must align with DLA’s procurement requirements. The item is designated a critical application and is subject to strict quality standards referenced in the DLA Master List of Technical and Quality Requirements, including sampling protocols per MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified. Mercury and mercury-containing compounds are prohibited except in specific exempted applications such as certain batteries, instruments, or weapon systems, and portable devices containing mercury must have shockproof housing and a secondary containment barrier in accordance with NAVSEA 5100-003D. Asbestos is strictly forbidden. The item does not require Unique Identification under DFARS 252.211-7003. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics follow specified DLA procedural notes. The contract was solicited July 31, 2026, with responses due by August 7, 2026, under NAICS code 339991, issued by the Department of Defense for Land Supplier Operations Vehicle Support.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L3-26-Q-1241
The contract pertains to the supply of 93 gaskets identified by NSN 5330-01-271-4308, with a delivery requirement of 150 days after order placement. All items must be free of asbestos, and any substitutions for listed code or part numbers containing asbestos require formal approval under Clause L30 and Provision 4 conditions. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements accessible via the provided web portal, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA packaging requirements, and all non-accepted supplies must have government identification removed prior to delivery. The solicitation number is SPE7L3-26-Q-1241, issued on July 31, 2026, with responses due by August 7, 2026. Performance is designated for Tracy, CA, 95304-5000, under NAICS code 336411, and the contracting activity falls under the Department of Defense’s Land Supplier Operations Vehicle Support. Primary point of contact is Susan Diamond at dla.flbb1prs@dla.mil or 614-692-5625.
Aircraft Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-108R
The contract is for the procurement of 243 units of PACKING, PREFORMED with NSN 5330-00-510-8549 under solicitation SPE7L3-26-T-108R, issued by the Department of Defense through Land Supplier Ops Vehicle Spt. The item is classified as a commercial item and must comply with DLA packaging requirements, including technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The use of asbestos as defined in FED-STD-313 is strictly prohibited. Delivery is required within 168 days after award, with performance occurring at Tinkering Air Force Base, Oklahoma. The solicitation was posted on July 9, 2026, with responses due by July 20, 2026. For simplified acquisitions, the applicable revision of the DLA Master List is determined by the solicitation issue date or award date. The point of contact for inquiries is Susan Diamond, reachable via email or phone, and all documentation must be submitted through the DIBBS platform.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333612
New
DIBBS
LEADSCREW, SCREW JAC
Solicitation # SPE7L3-26-T-123T
This contract pertains to the procurement of a lead screw for a screw jack, identified by part number D2758-01-00 and NSN 3010-01-732-3696, with a quantity of four units required. The item is classified as a critical application item, and while unit identification is not mandated, all delivery and packaging must adhere strictly to DLA and MIL-STD guidelines. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. Palletization follows DLA packaging requirements, and delivery is FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and the delivery window is set for 208 days from the contract award, with a firm need ship date of February 25, 2027. The item must not contain any Class I ozone-depleting chemicals, a prohibition that overrides any conflicting specification language, and substitutes require prior approval unless explicitly permitted. The contract is issued under solicitation number SPE7L3-26-T-123T as a total small business set-aside under NAICS code 333612, awarded by the Department of Defense’s Land Supplier Operations Vehicle Support branch. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The destination for delivery is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation logistics are governed by DLAD procedural notes C19 and C20. The point of contact for the contract is Benita Umoren, reachable via phone and email, and full details including unit of issue conversion are available through official DoD resources. All terms are binding under federal procurement guidelines, with strict adherence to compliance, environmental restrictions, and logistical directives.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336330
New
DIBBS
LINING MATERIAL, FRI
Solicitation # SPE7L3-26-T-082V
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, SEAL REPL
Solicitation # SPE7L3-26-Q-1237
This contract specifies the procurement of a Parts Kit, Seal Replacement with the National Stock Number 5330-01-719-1047 and a quantity of 2 kit units, to be delivered within 230 days after the award date. The item is classified as a critical application item and must comply with strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. All packaging and preservation must adhere to MIL-STD-2073-1E, Appendix D for kits, and the end item must be sealed in a medium-duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, due to the sensitivity of the NSN to ultraviolet exposure. Packaging, marking, and shipping must follow MIL-STD-129 and DLA Packaging Requirements, including palletization standards, and include special markings as designated. The item is subject to delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, under direct vendor delivery, foreign military sales, or stock shipment conditions. The contract prohibits the use or incorporation of Class I ozone-depleting chemicals and mandates that any substitute chemicals require prior approval unless explicitly authorized by the specifications. Mercury or mercury-containing compounds are strictly banned from direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. The supplier, Defense Maritime Solutions, Inc., with part number H73918-01/OK, must ensure all items are marked per MIL-STD-130N and that preserved materials meet the specified preservation methods. No quantity variance is permitted—delivery must be exactly two kit units. Contract data indicates it was issued under solicitation SPE7L3-26-Q-1237, with a response deadline in August 2026 and a material need date of February 5, 2027. All handling and transportation must comply with DLA procedural notes C19 and C20, and the point of contact for inquiries is Michael O'Connor at the Department of Defense.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
RUBBER STRIP
Solicitation # SPE7L3-26-Q-1243
The contract is for the procurement of 6 units of a rubber strip under solicitation number SPE7L3-26-Q-1243, with a delivery requirement of 150 days after award. The item is classified under Federal Supply Class 5330/5331 and carries the National Stock Number 5330-20-001-9814. All supplies must comply with the DLA Master List of Technical and Quality Requirements, where referenced technical and quality standards are identified by R or I numbers and are incorporated by reference. Packaging must meet MIL-DTL-117, Type II, Class C, Style 1, requiring medium duty, waterproof, greaseproof, and opaque sealing to protect against ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents specified by NAVSEA; portable devices containing mercury must be shockproof and feature a secondary containment boundary as defined by NAVSEA 5100-003D. Additionally, all items must be free of asbestos, with any prior asbestos-containing parts or alternatives subject to approval under Clause L30 and Provision 4 conditions. The solicitation opened on July 31, 2026, and responses are due by August 7, 2026, with the point of contact being Susan Diamond at the Department of Defense’s Land Supplier Operations Vehicle Support office.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
SEAL RING, METAL
Solicitation # SPE7L3-26-Q-1245
The contract is for 127 metal seal rings with NSN 5330-01-015-2382 under solicitation SPE7L3-26-Q-1245, issued by the Department of Defense through the Land Supplier Operations Vehicle Support office. All items must be free of asbestos, and any alternative materials or substitutions require explicit approval under Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have all government identification removed as per RQ011. The item must be marked in accordance with MIL-STD-130N dated 16 November 2012. Delivery is required within 90 days after delivery order, and the place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation opened on July 31, 2026, and responses are due by August 7, 2026, with primary point of contact Susan Diamond at dla.flbb1prs@dla.mil or 614-692-5625.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
PACKING WITH RETAINER
Solicitation # SPE7L3-26-Q-1244
The contract requires the supply of 1,284 units of a packing with retainer item under solicitation SPE7L3-26-Q-1244, with a delivery deadline of 150 days after order placement. All items must comply with stringent packaging standards, including enclosure in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation of Federal Supply Classifications 5330/5331 NSNs and LSNs. This packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The product must be free of asbestos, and any previously approved asbestos-containing components are no longer acceptable without formal approval under Clause L30 and Provision 4 conditions. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a second layer of containment as specified in NAVSEA 5100-003D. The item must be marked in accordance with MIL-STD-130N for U.S. military property identification. The contract incorporates cybersecurity requirements under CMMC Level 2 Self-Assessment and references technical and quality standards from the DLA Master List, with the applicable revision based on the solicitation issue date or award date. Performance is required at Robins AFB, Georgia, and inquiries should be directed to the primary point of contact, Susan Diamond, at DLA.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333613
New
DIBBS
CAM, CONTROL
Solicitation # SPE7L3-26-T-124D
This contract, issued under solicitation SPE7L3-26-T-124D by the Department of Defense through the Land Supplier Operations Vehicle Support office, pertains to the procurement of two critical automation control items from Emerson Automation Solutions with part numbers 07209001128 and SW142-16, totaling six units. The items are designated as critical application components and must comply with strict technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment barrier in accordance with NAVSEA 5100-003D. Delivery is required FOB origin within 157 days, with zero variance allowed in quantity, and inspection and acceptance will occur at the destination. Packaging must adhere to MIL-STD-2073-1E with specified methods for preservation, wrapping, and unit containment, while marking must conform to MIL-STD-129 with no special marking required. The deliverables must be palletized per DLA’s packaging guidelines and shipped to the designated receiving warehouse in Tracy, California. The original required delivery date is May 19, 2027, with a need ship date of January 5, 2027. The contract specifies the unit of issue as each and the total contract value is $36.00, with terms aligned with DoD and DLA procedures for transportation and freight. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336992
New
DIBBS
CAP, FILLER OPENING
Solicitation # SPE7L3-26-T-124C
The item specified is a CAP, FILLER OPENING, to be manufactured using a metal casting process, requiring specialized tooling for production. A total of 63 units are requested under solicitation SPE7L3-26-T-124C, with delivery due within 157 days from award. The procurement is governed by the Defense Logistics Agency and falls under NAICS code 336992, targeting federal suppliers with performance occurring in New Cumberland, Pennsylvania. Compliance with stringent quality and technical requirements is mandatory, including adherence to the DLA Master List of Technical and Quality Requirements, and specific documentation controls such as Configuration Change Management via Engineering Change Proposals and Inspection and Acceptance at Origin. The item contains components governed by Qualified Products Lists or Qualified Manufacturers Lists, necessitating strict supplier qualification. Export control regulations apply to associated technical data, subject to either ITAR or EAR, prohibiting unauthorized transfer to foreign persons or entities, including domestic subsidiaries of U.S. firms. Access to this controlled data is restricted to contractors holding U.S./Canada Joint Certification Program approval, having completed mandatory DOD export control training, and obtained formal authorization from DLA. Packaging must meet DLA procurement standards, and non-accepted supplies must have government identification removed per specified directives. Cybersecurity compliance is required at CMMC Level 2 through a certified third-party assessment organization. All responses to this solicitation must be submitted by July 31, 2026, with primary point of contact Matthew Curry at the Defense Logistics Agency.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details