Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CLUTCH HALF, POSITIV

Active
SPE7M4-26-T-298BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a CLUTCH HALF, POSITIVE, NONVEHICULAR, identified by NSN 3010-00-974-4952 and part number 133722A from BORGWARNER TRANSMISSION SYSTEMS, with a quantity of 22 units to be delivered FOB ORIGIN within 98 days. Delivery must be made to DLA Distribution Depot Oklahoma at Tinker AFB, with inspection and acceptance occurring at the destination. Packaging must comply strictly with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA Packaging Requirements for Procurement, and all technical and quality specifications defined in the DLA Master List of Technical and Quality Requirements take precedence. The item is designated as a Critical Application Item and is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment requirements. Government identification must be removed from non-accepted supplies, particularly those used on C-141 aircraft hydraulic drives. The unit of issue is each, priced at $22.00 per unit, with zero variance allowed in quantity. The contract number is SPE7M4-26-T-298B, with a required ship date of June 29, 2026, and an original delivery deadline of August 4, 2026. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and all labeling and marking must conform to specified federal standards.

General Info

Procure 22 clutch halves, NSN 3010-00-974-4952, FOB origin, CMMC Level 2, deliver to Tinker AFB by August 4, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

333612 - Speed Changer, Industrial High-Speed Drive, and Gear ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-298B for Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Freddie Vazquez
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLUTCH HALF,POSITIV
CLUTCH HALF, POSITIVE,NONVEHICULAR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
USED ON CONSTANT SPEED HYDRAULIC DRIVE
ON C-141 ACFT.
694692, 99167
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CRITICAL APPLICATION ITEM
BORGWARNER TRANSMISSION SYSTEMS 99186 P/N 133722A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7014582117 0001 EA 22.000
NSN/MATERIAL:3010009744952
DELIVERY (IN DAYS):0098
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7M4-26-T-298B
SECTION B
PR: 7014582117 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:06/29/2026 Original Required Delivery Date:08/04/2026
SPE7M4-26-T-298B NSN/Part Number: 3010-00-974-4952 Quantity: 22 EA Purchase Request: 7014582117QTY: 22 Delivery: 98 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333612
New
DIBBS
COUPLING, SHAFT, FLEXIBL
Solicitation # SPE7M4-26-T-278W
The contract calls for the procurement of 23 flexible shaft couplings with a tapered bore and keyway on one end and a straight bore and keyway on the other, featuring a double disk design with stainless steel disks and included coupling bolts. The item, identified by NSN 3010012777646 and part number 29748 from REXNORD INDUSTRIES, LLC, must be fully assembled upon delivery and is classified as a critical application item. Strict environmental and material restrictions apply: Class I ozone-depleting chemicals are prohibited, and mercury or mercury-containing compounds must not be intentionally added or come into direct contact with the hardware, except in specific functional applications such as batteries, fluorescent lights, sensors, controls, weapon systems, or chemical analysis reagents as authorized by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shock-proof and include a second boundary of containment per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E with cling/dry preservation, no wrap or cushioning materials, and unit containers designated as D3 with open top and intermediate containers as ED. Marking must comply with MIL-STD-129, including standardized barcodes, with no special marking required. Delivery is FOB origin, with a 168-day delivery period from solicitation issuance, targeting a required delivery date of February 8, 2027, to the designated receipt warehouse in Tracy, CA. Payment and invoicing must be processed through WAWF, and the contract is a total small business set-aside under NAICS code 333612. Compliance with numerous FAR and DFARS clauses is mandatory, including those governing hazardous materials, cybersecurity, workforce equity, trafficking in persons, electronic payment submission, and prohibition of covered telecommunications equipment and substances like hexavalent chromium. Offerors must certify their small business status, provide a UEI and CAGE code, and adhere to all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. No formal evaluation factors or award basis are stated, but technical compliance and pricing will drive selection. The government retains inspection and acceptance authority at the delivery point.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333612
New
DIBBS
GEAR, BEVEL
Solicitation # SPE7L1-26-T-907N
The contract pertains to the procurement of bevel gears under solicitation SPE7L1-26-T-907N, with a single line item for 19 units of NSN 3020-01-706-0375 at a unit price of $19.00, totaling $361.00. Delivery is required 118 days after award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including specified preservation methods, wrapping materials, and container codes, while marking adheres to MIL-STD-129 without special identifiers. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation details are governed by DLAD procedural notes C19 and C20. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The item falls under NAICS code 333612, and the contracting activity is the Department of Defense’s Land Supply Chain. The response deadline is August 14, 2026, with an original delivery target of July 24, 2026, and the primary point of contact is Katherine Woods, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
DIBBS
GEAR ASSEMBLY, SPEED DE
Solicitation # SPE7LX-26-U-9166
This contract pertains to the procurement of a Gear Assembly, Speed Decreaser, with a specific NSN of 3010-00-563-5440, for a quantity of 75 units under solicitation SPE7LX-26-U-9166. The item is classified as a heavy-duty 90-degree adapter assembly and may require casting or forging processes, with associated tooling typically needed—tooling that the government may not possess, necessitating potential assistance requests for sourcing materials or manufacturing support. The procurement is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with compliance enforced via referenced R and I numbers. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes must be verified at designated levels corresponding to critical, major, and minor classifications. Delivery is FOB origin with a 116-day delivery window, and inspection and acceptance occur at the destination. Packaging must conform to MIL-STD-2073-1E and DLA packaging standards, with marking required to comply with MIL-STD-129 and no special marking codes applied. The contract prohibits the use of Class I ozone-depleting chemicals and mandates approval for any substitute chemicals unless explicitly authorized. Configuration changes require formal Engineering Change Proposals, and deviations or waivers must be formally requested. Cybersecurity compliance mandates a CMMC Level 2 Self-Assessment, and full and open competition applies under a Total Small Business Set-Aside. The unit price is $75.00 per unit, totaling $5,625, with no variance permitted on quantities, and all performance is directed under DLA’s direct contract authority within CONUS.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333612
New
Federal
W91237-26-Q-A065 ALUM CREEK LAKE LARGE GEARBOX REPAIR
Solicitation # W9123726QA065
The Contractor is responsible for the complete lifecycle management of one speed reducer at Alum Creek Lake in Lewis Center, Ohio, including pickup, thorough cleaning, detailed inspection, rehabilitation, functional testing, and final delivery. All work must be performed to meet stringent military standards, ensuring the unit is fully restored to operational condition before handoff. The task is part of a broader maintenance effort under the Department of Defense, managed by the U.S. Army Corps of Engineers office in Huntington, West Virginia, and is designated as a Small Business Set Aside, exclusively available to small business concerns. The solicitation, identified as W91237-26-Q-A065 with NAICS code 333612 for industrial machinery manufacturing, was posted on August 3, 2026, with responses due by August 18, 2026. Primary point of contact for inquiries is Carrie McClung, with secondary support provided by Bret Foley, both reachable through official U.S. Army Corps of Engineers channels. The place of performance is specified by zip code 43035, corresponding to the location of Alum Creek Lake, while all logistics and administrative oversight originate from the Huntington, West Virginia office.
W072 Endist Huntington

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333612
New
DIBBS
Flexible Coupling Supply (Manufacturing/Supply)One unit of a flexible coupling, model CB75325 with NSN 3010013687699, is being procured through a subcontract mechanism under the Department of Defense’s Land Supply Chain, ensuring full compliance with DLA technical and quality standards. The item must be manufactured or distributed exclusively through authorized Emerson Power Transmission channels to guarantee authenticity and performance integrity. The solicitation was posted on August 2, 2026, with responses due by August 17, 2026, and is classified under NAICS code 333612, which pertains to the manufacturing of industrial machinery. The contract is part of a broader defense logistics initiative and requires adherence to stringent military specifications without any set-aside provisions. All deliverables are expected to meet exacting reliability and durability benchmarks for operational use.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 333612
New
DIBBS
GEAR, SPUR
Solicitation # SPE7L1-26-T-905S
The contract is for one spur gear, NSN 3020-01-464-2299, under solicitation SPE7L1-26-T-905S, with a required delivery within five days of award, FOB destination. The item must be packaged in strict compliance with MIL-STD-2073-1E, including preservation method 33, heat-sealed barrier bags for cleanliness, and labeling per MIL-STD-129. Packaging must align with DLA’s reduced plastic initiative, minimizing plastic use without compromising protection, and palletization must follow DLA’s packaging requirements. The delivery address is for USNS IMPECCABLE, FPO AP 96668, with a clear directive to avoid parcel post and ship via the fastest traceable means. The purchase request number is 7012874939, and the quantity is exactly one unit with zero variance allowed. Inspection and acceptance occur at the destination. The contract references technical and quality requirements from the DLA Master List and specifies that the applicable revision is determined by the solicitation or award date depending on acquisition type. The vendor must use the DLA VSM system and reference the provided shipping and project codes. The original required delivery date is July 8, 2025, and the point of contact for inquiries is Isabelle Szulewska, reachable through DLA’s official channels.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
DIBBS
INSERT, FLEXIBLE COU
Solicitation # SPE7L1-26-U-0528
The contract solicitation SPE7L1-26-U-0528 issued by the Defense Logistics Agency under the Department of Defense’s Land Supply Chain is an indefinite-delivery contract for a single line item: INSERT, FLEXIBLE COUPLING, part number CB75325 and CD75321, identified by NSN 3010-01-368-7699. Only one unit is specified at a unit price of $1.000 with a total estimated value ranging from $1.00 to a maximum contract ceiling of $350,000.00, indicating that future task orders may be issued under the indefinite-quantity structure up to that cap. The product must be delivered within 104 days of award, FOB origin, with inspection and acceptance occurring at the destination point. Packaging and preservation must strictly adhere to MIL-STD-2073-1E with QUP 001, preservation method 33, preservation material 49, wrapping material GB, and unit container E5, while all marking and labeling must conform to MIL-STD-129 with no special marking code required. Palletization must comply with DLA’s RP001 packaging requirements. The contract imposes stringent compliance obligations concerning materials and cybersecurity. The use of ozone-depleting chemicals is strictly prohibited, and mercury or mercury-containing compounds are banned unless explicitly exempted for functional applications such as batteries, fluorescent lights, sensors, or naval weapons components, with special containment requirements for portable devices. The contractor must comply with DFARS 252.204-7012 for safeguarding covered defense information and reporting cyber incidents, and must also meet NIST SP 800-171 requirements through a DoD assessment. The acquisition of equipment from certain foreign telecommunications providers is forbidden, and all hazardous materials must be labeled per OSHA Hazard Communication Standard. The contractor is required to use the WAWF system for invoicing and payment requests, with payment governed by federal financial systems and applicable to a single unit initially. Offerors must validate their small business status, complete all required representations in SAM including UEI and CAGE codes, and submit proposals exclusively through the DLA Internet Bid Board System (DIBBS) by August 17, 2026. No formal evaluation factors, price weightings, or trade-off methodology are stated, suggesting
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 14 days
View Details
NAICS: 333612
New
DIBBS
Material and Component Supply for GeneratorsThe contract entails the supply of critical generator components including engines, alternators, control panels, and enclosures, with strict requirements for traceability and compliance with military specifications. All parts must meet rigorous quality and documentation standards to ensure full material lineage and conformance to defense-grade performance criteria. The work is conducted as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and is classified under NAICS code 333612 for engine, turbine, and power transmission equipment manufacturing. Delivery and performance are governed by military procurement protocols, and components must be capable of reliable operation in demanding operational environments. The contract was posted on July 31, 2026, and is issued under the reference SPE7MX22D0016 with delivery order SPE7LX24F7033. While specific place of performance details are not provided, the nature of the materials and the overseeing agency indicate that fulfillment will support defense systems across multiple locations. Compliance with MIL-SPEC standards is non-negotiable, and suppliers are expected to maintain full documentation for audit and verification purposes throughout the lifecycle of the delivered components. The contract emphasizes end-to-end accountability to ensure readiness and sustainment of critical power generation systems for national defense applications.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 333612
New
DIBBS
LEADSCREW, SCREW JAC
Solicitation # SPE7L3-26-T-123T
The contract is for the procurement of four units of a LEADSCREW, SCREW JACK with NSN 3010017323696, issued under solicitation SPE7L3-26-T-123T as a total small business set-aside under NAICS code 333612. Delivery is required at the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB Origin terms and a strict delivery window of 208 days from award, culminating in a mandatory ship date of February 25, 2027. The item must comply with all applicable DLA technical and quality requirements referenced through R and I numbers in the DLA Master List, and is subject to a zero tolerance variance in quantity. No Item Unique Identification is required per DFARS 252.211-7003(c)(1)(i), though all packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, container types, and palletization per RP001. The use of Class I Ozone-Depleting Chemicals is strictly prohibited, and substitute chemicals require prior approval unless explicitly authorized by the specification. Inspection and acceptance occur at the destination, and all shipments must be addressed to the designated federal delivery point. Invoicing must be submitted electronically through WAWF, and cybersecurity compliance is mandated via clauses requiring safeguarding of covered defense information and reporting of cyber incidents. The contractor must adhere to environmental, hazardous material, and trafficking-in-persons regulations, and must affirm representation of small business status with appropriate socioeconomic certifications at bid submission. All documentation must align with DoD standards, including hazard communication requirements under 29 CFR 1910.1200 and compliance with DFARS clauses governing data rights, subcontracting, and electronic payment procedures.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

4 days ago

DEADLINE

in 1 day
View Details
NAICS: 333612
New
International
Supply of Cooling System PumpsThe contract involves the procurement and delivery of engine cooling system pumps to Canadian Forces Supply Depots located in Montreal and Edmonton, with delivery terms governed by DDP Incoterms 2020, meaning the supplier is responsible for all costs and risks until the goods are delivered to the named destination. The tender is issued under the Department of National Defence on behalf of the Government of Canada, targeting suppliers with expertise in manufacturing and supplying specialized automotive and defense-related cooling components, as indicated by the NAICS code 333612. Bidders must submit responses by the deadline of September 15, 2026, with the opportunity posted on July 31, 2026, and the contract is classified as a subcontract under a broader government procurement framework. The place of performance is dual-location, requiring the supplier to coordinate logistics to meet the needs of both Edmonton and Montreal depots, ensuring full compliance with Canadian military specifications and delivery timelines without additional cost burdens to the Canadian Forces.
Department of National Defence

POSTED

4 days ago

DEADLINE

in about 1 month
View Details
NAICS: 333612
New
DIBBS
Hydraulic-Pneumatic Linear Actuator SupplyThe contract calls for the supply of 39 military-spec hydraulic-pneumatic linear actuators identified by NSN 3010-01-416-3249, with strict requirements for compliant packaging, labeling, and comprehensive hazardous materials documentation to meet federal defense standards. These actuators are critical components intended for military use and must adhere to exacting performance and safety specifications outlined by the Department of Defense. The solicitation is classified as a subcontract under NAICS code 333612, with a response deadline of August 10, 2026, and a posted date of July 30, 2026. Performance is designated for New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the delivered items must be shipped and accepted. The procurement is managed by the Land Supply Chain under the Department of Defense, and the full solicitation details can be accessed via the DIBBS platform using the provided link.
LAND SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 333612
New
DIBBS
Supply of Idler, Rotor, and Pump AssembliesThe contract requires the manufacture, testing, and delivery of two complete mechanical assemblies—specifically an idler, a rotor, and a pump—each built to meet stringent military specifications for performance, quality, and reliability. All components must comply with federal standards for packaging and preservation to ensure operational readiness during storage and transit, with the final deliverables destined for a designated performance location in New Cumberland, Pennsylvania, identified by the zip code 17070-5002. The work falls under NAICS code 333612, indicating this pertains to other engine equipment manufacturing, and is structured as a subcontract within the Department of Defense’s Maritime Supply Chain framework. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, creating a narrow twelve-day window for qualified vendors to submit proposals. Although no set-aside details are specified, the involvement of a DoD agency and adherence to military standards imply a high level of scrutiny, documentation, and certification requirements for compliance and delivery.
MARITIME SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 541511
New
DIBBS
Supply Chain Compliance for Prohibited Telecommunications EquipmentThe contract requires strict compliance with prohibitions on the use of covered telecommunications equipment, including products from Huawei, ZTE, and other restricted vendors, across all production and logistics systems. Full supply chain transparency is mandatory, with vendors obligated to provide documentation and certification confirming that no covered equipment is present at any tier of the supply chain, from raw materials to final assembly and distribution. This obligation extends to all subcontractors, suppliers, and service providers engaged in any phase of the work. The contract is issued under the Department of Defense’s Fluid Handling Division, with performance centered at Tracy, California, 95304-5000. It is classified as a subcontract with a NAICS code of 541511, indicating it pertains to custom computer programming services or related technology integration tasks. Responses must be submitted by August 14, 2026, and the solicitation was posted on August 3, 2026. All parties must adhere to federal guidelines restricting the use of equipment deemed a national security risk, with non-compliance potentially leading to contract termination or legal repercussions.
Custom Computer Programming Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls as outlined in NIST Special Publication 800-171 for systems that handle covered defense information, ensuring alignment with Department of Defense requirements. This includes safeguarding technical data and fulfilling all obligations under the DFARS clauses related to cyber incident reporting, with immediate notification and documentation of any security breaches or anomalies affecting protected information. Compliance is non-negotiable and must be sustained throughout the contract period, with continuous monitoring and updates to address evolving threats and regulatory changes. Performance is required at the specified location in Tracy, California, with the work falling under the NAICS code 541512 for computer systems design services. The contract is structured as a subcontract and is part of a broader effort by the Fluid Handling Division within the Department of Defense to enforce rigorous cybersecurity standards across its supply chain. All offerors must submit responses by the deadline of August 14, 2026, and must demonstrate proven capability in executing NIST 800-171 controls and managing cyber incident response processes in compliance with federal defense contracts.
Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Safety Data ManagementThe contract requires strict adherence to Department of Defense regulations regarding the use and management of hazardous substances, specifically prohibiting or limiting substances such as hexavalent chromium and mercury in materials and processes. All suppliers must ensure that their products and services fully comply with these restrictions and document compliance through appropriate technical and material certifications. Safety Data Sheets must be provided for all materials used, meeting federal and DoD regulatory standards to ensure transparency, safety, and environmental responsibility throughout the supply chain. The contract is structured as a subcontract under NAICS code 541620, related to scientific research and development services, with performance centered at Tracy, California, ZIP 95304-5000. It was posted on August 3, 2026, with responses due by August 14, 2026, and is managed by the Fluid Handling Division of the Department of Defense. Compliance is non-negotiable, and failure to provide accurate SDS documentation or use of restricted substances could result in contract termination or penalties. The solicitation is accessible through the DIBBS platform, and all participants must align their operations with DoD environmental and safety mandates.
Environmental Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Defense-Compliant Packaging and LabelingThe contract requires full compliance with military and industry standards for the packaging and labeling of a mounting plate, specifically adhering to MIL-STD-129, ASTM D3951, and Department of Defense Logistics Agency-specific guidelines for palletization and marking. All packaging must meet exacting defense logistics requirements to ensure proper identification, handling, and traceability throughout the supply chain during transit. The work is tied to a specific place of performance in Tracy, California, with a ZIP code of 95304-5000, and is classified under NAICS code 561910, indicating it is a subcontract for support services in packaging and labeling operations. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, and is issued by the Fluid Handling Division within the Department of Defense. This contract is not subject to any set-aside provisions and is intended for subcontractors capable of executing defense-compliant packaging and labeling processes under strict regulatory oversight. Failure to comply with any of the referenced standards could result in rejection of交付 or financial penalties. Interested parties must review the full solicitation details via the provided DIBBS link before submitting bids, as adherence to every technical and procedural requirement is mandatory for award consideration.
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
Precision Machining of Mounting PlateThe contract calls for the manufacture of a precision mounting plate in accordance with military specifications, requiring advanced CNC machining, surface finishing, and rigorous quality inspection processes. All work must comply with DLA Master List requirements and obtain formal engineering approval to ensure technical and operational conformance. The item is classified under NAICS code 332996 and is being procured as a subcontract under the Fluid Handling Division of the Department of Defense. Performance of the work is designated for Tracy, California, with a zip code of 95304-5000, indicating the physical location where the manufacturing, inspection, and delivery activities must occur. The solicitation was posted on August 3, 2026, and responses must be submitted by August 14, 2026, providing a twelve-day window for qualified vendors to propose their capability, schedule, and pricing. The contract is not categorized under any specific set-aside program, making it open to eligible subcontractors regardless of business size or status. All work must meet exacting military standards without exception, emphasizing dimensional accuracy, material integrity, and documented traceability throughout production.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
Supplier of Domestic Raw Materials (Steel, Alloy Wire)The contract seeks a supplier to provide U.S.-melted and U.S.-cast spring-grade steel or alloy wire with full traceability and certification compliant with both the Berry Amendment and the Buy American Act, ensuring all materials originate entirely within the United States. The product must meet stringent domestic content requirements to support defense-related applications, with documentation verifying the origin of raw materials through every stage of production. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to respond, aligning with SBA regulations and the NAICS code 331221 for steel product manufacturing. Performance of the contract is required to occur in Phoenix, Arizona, with a response deadline of August 14, 2026, and the solicitation was posted on August 3, 2026. The contracting activity falls under the Department of Defense’s Fluid Handling Division, indicating the wire will support critical defense systems requiring high-performance, domestically sourced materials. Full compliance with federal acquisition regulations regarding origin, certification, and small business eligibility is mandatory, and interested vendors must submit proposals through the official DIBBS portal prior to the deadline to be considered.
Rolled Steel Shape Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Covered Defense InformationThis contract requires the implementation of NIST SP 800-171 controls to protect covered defense information in accordance with DFARS 252.204-7012, ensuring robust cybersecurity measures are in place to meet federal defense standards. The scope includes full compliance with access controls, audit and accountability mechanisms, configuration management, incident response procedures, and other critical security practices outlined in the NIST framework, with a mandatory requirement to report any cybersecurity incidents promptly and accurately. The work must be performed at a location in Phoenix, Arizona, under a small business set-aside classification, limiting eligibility to businesses certified as small by the SBA. The contract is structured as a subcontract under the Department of Defense’s Fluid Handling Division, solicited under NAICS code 541512 for other computer related services. Interested parties must respond by the deadline of August 14, 2026, and are expected to demonstrate proven experience in securing controlled unclassified information and managing cybersecurity compliance in defense environments. Performance will be evaluated based on technical capability to meet NIST and DFARS requirements, with emphasis on validated security controls, incident reporting protocols, and adherence to federal cybersecurity mandates without reliance on external documentation or third-party certifications not directly tied to the contract’s explicit obligations.
Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Defense-Compliant Packaging and MarkingThe contract requires compliant packaging of springs in accordance with military standards, specifically MIL-STD-129, which mandates the use of heat-sealed barrier bags, approved preservation techniques to prevent corrosion and degradation, and accurate barcode labeling for inventory and logistics tracking. All packaging must meet stringent Defense Department specifications to ensure durability, traceability, and readiness in operational environments. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, reinforcing the government’s commitment to small business participation in defense supply chains. The solicitation targets vendors capable of fulfilling requirements for the Fluid Handling Division within the Department of Defense, with performance obligations centered in Phoenix, Arizona, at the ZIP code 85043. The opportunity was posted on August 3, 2026, with responses due by August 14, 2026, and is categorized under NAICS code 541690, which covers other scientific and technical consulting services. Bidders must ensure full compliance with all marking, labeling, and packaging protocols without exception, as failure to meet these standards will constitute nonconformance. The contract is managed through the DIBBS platform and is intended to support defense logistics infrastructure through precise, standardized, and secure packaging solutions.
Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Handling and LabelingThe contract encompasses the labeling, packaging, and documentation of hazardous materials used in the production of springs, requiring strict adherence to OSHA and Department of Defense safety and regulatory standards. All activities must be performed to ensure compliance with federal hazardous materials handling protocols, including accurate identification, proper containment, and complete recordkeeping to support safe transportation, storage, and use within the manufacturing process. The work is to be conducted at a facility located in Phoenix, Arizona, with the zip code 85043, and is structured as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns as defined by the SBA are eligible to bid. The North American Industry Classification System code for this procurement is 541620, indicating it falls under scientific and technical consulting services. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026, with the contracting activity managed by the Fluid Handling Division of the Department of Defense.
Environmental Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
Helical Compression Spring ManufacturingThe contract calls for the manufacture of six helical compression springs in strict compliance with military specifications, encompassing all phases of production from material sourcing and heat treatment to final finishing and rigorous testing. Each spring must meet defined technical and performance criteria, and all work requires prior approval from the government engineering source to ensure conformance with applicable standards. The effort is classified as a subcontract under a Total Small Business Set-Aside, restricted to small businesses as defined by the SBA, and falls under NAICS code 332613 for spring manufacturing. The place of performance is designated as Phoenix, Arizona, with a zip code of 85043, and the contracting activity is managed by the Fluid Handling Division under the Department of Defense. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026.
Spring Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Small Business Compliance & Socioeconomic Representation Support
Administrative Management and General Management Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging, Labeling, and Palletization
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details