Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CLUTCH, MAGNETIC, NON

Active
SPE7M4-26-T-344SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 16 non-vehicular magnetic clutches, identified by NSN 3010-01-412-5188, for use in air conditioner models AM32C6 and under various military specifications including MIL-A-4914, MIL-A-26107, and MIL-A-27490. The items are designated as critical application items and are compatible with part number 027010 from suppliers such as ABB Motors and Mechanical Inc, Applied Industrial Technologies, and The Belting Company of Cincinnati. The agreement is a total small business set-aside issued by the Department of Defense Fluid Handling Division. Key compliance requirements include CMMC Level 2 self-assessment, adherence to covered defense information protocols, and DLA packaging standards including ASTM D3951 and MIL-STD-129. Delivery is set for FOB Origin with a required delivery date of November 29, 2027, and the final destination is the DLA Distribution Depot at Tinker AFB, Oklahoma.

General Info

DoD procurement of 16 magnetic clutches for Tinker AFB by November 29, 2027.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

333612 - Speed Changer, Industrial High-Speed Drive, and Gear ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

SBA

Documents

(1)

SPE7M4-26-T-344S.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA
Contacts
Blake Tushar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLUTCH,MAGNETIC,NON
CLUTCH, MAGNETIC, NON-VEHICULAR
RD002, COVERED DEFENSE INFORMATION APPLIES
USED ON AIR CONDITIONER MODELS AM32C6, MIL-A-4914<(>,<)>
MIL-A-26107, AND MIL-A-27490.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CRITICAL APPLICATION ITEM
ABB MOTORS & MECHANICAL INC 46UR5 P/N 027010
APPLIED INDUSTRIAL TECHNOLOGIES 4KV65 P/N 027010
THE BELTING COMPANY OF CINCINNATI 7W105 P/N 027010
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017915201 0001 EA 16.000
NSN/MATERIAL:3010014125188
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7M4-26-T-344S
SECTION B
PR: 7017915201 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:02/12/2027 Original Required Delivery Date:11/29/2027
SPE7M4-26-T-344S NSN/Part Number: 3010-01-412-5188 Quantity: 16 EA Purchase Request: 7017915201QTY: 16 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333612
New
DIBBS
GEAR, SPUR
Solicitation # SPE7L4-26-T-6348
This contract is a solicitation for the procurement of five spur gears, identified by NSN 3020015475003 and part number A88412067 from Meritor Industrial Products, LLC. The agreement specifies a delivery timeframe of 168 days after order, with a required delivery date of July 27, 2027. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. Key compliance requirements include the Cybersecurity Maturity Model Certification Level 2 self-assessment and the protection of covered defense information. Technical and quality standards are governed by the DLA Master List, and the contract explicitly prohibits the inclusion of government identification on non-accepted supplies.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE4A5-26-T-362A
This contract is for the procurement of 35 electrical solenoids, identified by NSN 5945-01-202-5111 and Parker-Hannifin part number 2722028. The items are designated as critical application items and must be delivered to the DLA Distribution Depot Oklahoma at Tinker AFB within 171 days. The contract specifies a zero percent quantity variance and requires inspection and acceptance to take place at the destination. The contractor must adhere to strict marking and packaging standards, including MIL-STD-129 and IPC/JEDEC J-STD-609 for identifying lead or lead-free component finishes. Quality assurance will be managed through sampling methods based on MIL-STD-1916 or ASQ H1331. Additionally, the contract incorporates several DLA technical and quality requirements, including specific guidelines for packaging, configuration change management, and the use of measuring and test equipment. Item Unique Identification is not required for this order.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333612
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7L4-26-T-6336
This contract is for the procurement of nine groove pulleys, identified by NSN 3020-01-682-0544 and part number 43V530SDS from Regal Beloit America, Inc. The agreement is managed by the Department of Defense under solicitation number SPE7L4-26-T-6336, with a required delivery date of April 16, 2027. Delivery is set for 116 days after the order, with shipping terms established as FOB Origin and inspection and acceptance occurring at the destination. The items must be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Compliance with specific technical and quality requirements is mandatory, including DLA packaging standards, MIL-STD-129 marking, and MIL-STD-2073-1E preparation for delivery. Additionally, the contract strictly prohibits the use of Class I ozone-depleting chemicals in the manufacturing of the supplied items.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
DISK, CLUTCH, NONVEHI
Solicitation # SPE7LX-26-U-9065
Solicitation SPE7LX-26-U-9065 is an Indefinite Delivery Contract issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of nonvehicular clutch disks, identified by NSN 3010008128162 and Aerocontrolex Group part number 367237. The contract has a maximum value ceiling of 350,000 dollars, with an estimated quantity of 129 units. Delivery is required within 104 days after receipt of order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129 for marking and labeling, while ensuring compliance with DLA packaging requirements for procurement. Administrative requirements include electronic invoicing via Wide Area Workflow and adherence to cybersecurity standards, specifically CMMC Level 2 self-assessment and NIST SP 800-171. The contract incorporates various FAR and DFARS clauses covering equal opportunity, hazardous material identification, and the prohibition of unauthorized obligations.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 333612
New
DIBBS
GEAR AND SHAFT ASSE
Solicitation # SPE4A7-26-T-628Q
Solicitation SPE4A7-26-T-628Q is a federal acquisition by the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, for the procurement of 20 units of Gear and Shaft Assembly, No 3 (NSN 5865-00-736-9027). This commercial item procurement is valued at 400,000 dollars, with a delivery timeframe of 127 days after receipt of order. The required ship date is December 20, 2026, with a final delivery date of April 21, 2027. Delivery is FOB Origin, and the items are to be shipped to DLA Distribution Warner Robins in Georgia. The contract mandates strict adherence to technical and quality standards, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-2073-1E for packaging. Marking must comply with MIL-STD-129, and physical item marking is required per RQ017. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various FAR and DFARS clauses, including those regarding hazardous material identification and the prohibition of hexavalent chromium. Proposals must be submitted via the DIBBS portal by August 14, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 333612
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE7L3-26-Q-1289
This contract is a solicitation for the procurement of 78 matched bevel gear sets under solicitation number SPE7L3-26-Q-1289 for the Department of Defense. The requirement is designated as a total small business set-aside with a delivery timeline of 148 days after the order is placed. Performance is centered in Anniston, Alabama, and the procurement is managed by the Land Supplier Operations Vehicle Support office. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific mandates for packaging, physical identification, and inspection at the origin. Notably, the contract contains technical data subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the necessary data.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 333612
New
DIBBS
GEAR CLUSTER
Solicitation # SPE7L1-26-Q-1499
Solicitation SPE7L1-26-Q-1499 is a Firm Fixed Price contract issued by the Defense Logistics Agency Land Supply Chain for the procurement of 16 spur gear clusters (NSN 3020-00-296-3201). The delivery schedule is set for 419 days after the date of order, with the primary place of performance and delivery located at DLA Distribution Depot Hill in Utah. The award will be based on a best-value trade-off process evaluating past performance, offered delivery, and price. The contract mandates strict adherence to technical and quality standards, including AGMA 390.03A for gear specifications and ASTM A304-96 for materials. Packaging and marking must comply with MIL-STD-129, MIL-STD-130, and ASTM D3951. Inspection occurs at the origin, while acceptance is conducted at the destination. Special requirements include CMMC Level 2 cybersecurity certification and compliance with ITAR and EAR export controls, requiring JCP certification for personnel handling technical data. All invoicing and payment processing must be completed electronically via Wide Area WorkFlow.
LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333612
New
DIBBS
GUARD, TURBO SUPERCH
Solicitation # SPE4A7-26-T-589P
The contract pertains to the procurement of one unit of a GUARD, TURBO SUPERCH with NSN 2950-01-701-5498, sourced from IVECO DEFENCE VEHICLES S.P.A. under solicitation SPE4A7-26-T-589P. Delivery is required FOB origin within 451 days from the contract date, with no variance permitted in quantity, and both inspection and acceptance are to occur at the point of origin. The item must comply with stringent packaging standards per MIL-STD-2073-1E and marking requirements as defined by MIL-STD-129, with no special marking applied. Packaging and palletization must adhere to DLA’s RP001 procurement guidelines, and all technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, including sampling methods dictated by MIL-STD-1916 or a comparable zero-based plan, where non-conformances must be zero unless otherwise stipulated. All documentation, including source approval requests, measuring equipment calibration, and inspection procedures, must meet the standards outlined in the referenced DLA directives. The shipment is to be delivered to the DDSP New Cumberland facility in Pennsylvania, with the same address used for both freight shipping and parcel post. The required ship date is October 24, 2027, matching the original delivery deadline. The U.S. Department of Defense, through the ASC Supplier Oper AE and AF Division, is the contracting authority, with Ariana Burnett listed as the primary point of contact. The procurement uses the DoD unit of issue, and alignment with ANSI X12 units must be verified through the official DLA database.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 333612
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L1-26-T-969C
Solicitation SPE7L1-26-T-969C is a total small business set-aside issued by the Department of Defense Defense Logistics Agency Land Supply Chain for the procurement of 48 friction clutch assemblies (NSN 3010013003763). The estimated contract value is 2,304.00 dollars, with a delivery requirement of 263 days after award and FOB terms set to origin. The place of performance is New Cumberland, Pennsylvania. A critical requirement of this contract is the First Article Testing (FAT) for one unit. The contractor must provide written notice to the Contracting Officer and Quality Assurance Representative at least 14 calendar days prior to shipment and submit the test report within 30 calendar days of the contract date. Approved first article units must be maintained at the production facility as a manufacturing standard until all production quantities are accepted. Compliance requirements include adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and bar-coding. Offerors must certify they do not provide covered telecommunications equipment and must comply with domestic material restrictions, including the Berry Amendment and Buy American Act. All invoicing and receiving reports must be processed electronically via Wide Area WorkFlow (WAWF), and contractors must register through the Account Management and Provisioning System (AMPS) to access the Vendor Shipment Module.
LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333612
New
DIBBS
TORQUE LIMITER ASSE
Solicitation # SPE7L2-26-Q-0012
This contract is for the procurement of 31 Torque Limiter Assemblies, identified by NSN 3010-01-622-7676. The agreement is established as a Firm Fixed Price contract with a strict quantity variance of plus or minus 0 percent. Delivery is required within 90 days after order, with the destination for both inspection and acceptance being the DLA Distribution New Cumberland facility in Pennsylvania. The supplier must adhere to specific technical and quality requirements, including DLA packaging standards and MIL-STD-129 marking guidelines. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional components as specified by NAVSEA. The assembly must be produced in accordance with the technical data package and basic drawing number 16236 RE-016227676.
LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 333612
New
DIBBS
GEAR, SPUR
Solicitation # SPE7L5-26-T-4992
This contract is for the procurement of 36 spur gears, identified by NSN 3020008591699 and part number 299-09 from Duke's Aerospace, Inc. The items are designated as critical application items and must adhere to specific technical and quality requirements outlined in the DLA Master List. Delivery is required by July 23, 2027, with a delivery window of 332 days. The shipment must be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements. Inspection and acceptance will take place at the destination, and the contract allows for zero quantity variance.
LAND SUPPLIER OPNS ENGINES

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333612
New
DIBBS
CLUTCH HALF, POSITIV
Solicitation # SPE7M4-26-T-298B
Solicitation SPE7M4-26-T-298B, issued by the Defense Logistics Agency Fluid Handling Division, is for the procurement of 22 positive nonvehicular clutch halves (NSN 3010-00-974-4952) used on constant speed hydraulic drives for C-141 aircraft. The items are identified as critical application items, specifically BorgWarner Transmission Systems part number 133722A. The contract specifies a delivery schedule of 98 days after the date of award, with a need ship date of June 29, 2026, and a required delivery date of August 4, 2026. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, which is the DLA Distribution Depot Oklahoma at Tinker AFB. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirements for procurement (RP001). Significant regulatory requirements are in place, including CMMC Level 2 self-assessment, NIST SP 800-171 cybersecurity compliance, and the prohibition of hexavalent chromium. Additionally, the contract mandates compliance with export controls, the prohibition of covered defense telecommunications equipment, and the use of the Wide Area Workflow (WAWF) system for all invoicing and payment requests. Proposals must be submitted electronically via the DIBBS portal by August 13, 2026.
FLUID HANDLING DIVISION

POSTED

3 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332510
New
DIBBS
RETAINER ASSEMBLY
Solicitation # SPE7M4-26-T-344D
This contract is for the procurement of one Retainer Assembly, identified by NSN 5365011224480 and part number 6456-2 from Cooper Interconnect, Inc. The order is managed by the Department of Defense Fluid Handling Division under solicitation SPE7M4-26-T-344D. Delivery is required within 168 days, with a need ship date of February 12, 2027, and a final required delivery date of July 22, 2027. The item is designated as a critical application item and will be delivered FOB Origin to Arizona Industries for the Blind in Phoenix, Arizona. Compliance requirements include strict adherence to DLA packaging, preservation, and marking standards, specifically MIL-STD-129, MIL-PRF-23199E, and ISO/IEC 16388 for bar coding. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with zero non-conformances required for acceptance. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-340Z
This contract is for the procurement of two metal tube assemblies, identified by NSN 4710000092170 and Meggitt Defense Systems part number K894821-01. The components are constructed from crescent material with a 0.250 inch outer diameter, a prebent design, and are finned to a 0.625 inch outer diameter. This is designated as a critical application item. The agreement specifies a delivery timeframe of 243 days with a required delivery date of April 28, 2027, shipping FOB Origin to DLA Distribution San Joaquin in Tracy, California. Strict compliance is required regarding the prohibition of mercury and class I ozone-depleting chemicals. Packaging and marking must adhere to MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements. Inspection and acceptance will take place at the destination.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M3-26-T-8256
This contract is for the procurement of 204 units of quick disconnect coupling halves, identified by NSN 4730011422853 and Eaton Aeroquip part number AE80711G. The items are designated as critical application items and must be delivered to DLA Distribution Cherry Point in North Carolina. The delivery timeline is set for 74 days after order, with a required delivery date of May 7, 2027. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Inspection and acceptance will occur at the destination. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332312
New
DIBBS
KNOB
Solicitation # SPE7M3-26-T-8283
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 258 units of a specific knob, identified by NSN 5355-01-119-6437. The contract requires delivery within 168 days after receipt of order and is categorized under NAICS code 332312. Performance will take place at Robins Air Force Base. A critical component of this requirement is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. To access this data, contractors must possess an approved US/Canada Joint Certification Program certification and complete mandatory DLA training and questionnaires.
Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
COUPLING, TUBE
Solicitation # SPE7M4-26-T-342A
This solicitation is for the procurement of 30 titanium tube couplings under solicitation number SPE7M4-26-T-342A for the Department of Defense Fluid Handling Division. The requirement is designated as a total small business set-aside with a delivery timeline of 218 days after receipt of order. The items are identified as commercial products and must adhere to class 3 thread specifications and specific DLA packaging and quality requirements. Because this is a restricted source item, it must be manufactured according to the original equipment manufacturer drawings. Only prequalified sources are authorized to manufacture the item unless alternative technical data is provided for evaluation. The contract includes strict guidelines regarding configuration change management, the removal of government identification from non-accepted supplies, and the handling of covered defense information. Performance will take place at Tinker AFB.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336419
New
DIBBS
SHAFT, SUBASSY
Solicitation # SPE7M4-26-T-340U
This contract, identified as SPE7M4-26-T-340U, is for the procurement of six shaft subassemblies, part number 257733 from Eaton Aerospace, LLC. The items are identified by NSN 1420009615009 and are to be delivered to the DLA Distribution Depot Hill at Hill AFB, Utah. The delivery timeline is set for 158 days after order, with a need ship date of February 2, 2027, and an original required delivery date of January 4, 2029. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment and the DLA Master List of Technical and Quality Requirements. Packaging must comply with ASTM D3951, MIL-STD-129, and RP001 requirements. The contract specifies that inspection and acceptance will occur at the destination, and the freight is delivered FOB Origin.
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
COUPLING HALF, QUICK DI
Solicitation # SPE7M3-26-T-8281
This contract is for the procurement of aluminum alloy quick disconnect coupling halves, specifically part number AE80758G by Eaton Aeroquip LLC. These self-sealing fittings feature a 3/8 inch OD tube size and a 1000 PSI operating pressure, utilizing a push-pull socket method. The items are designated as critical application components for use in Sea Stallion H-53 helicopters. The order consists of two line items totaling 53 units, with 4 units destined for DLA Distribution Cherry Point and 49 units for DLA Distribution San Diego. Delivery is required within 168 days, with a required delivery date of October 21, 2027. The items are subject to a non-extendable shelf life of 180 months and must adhere to strict DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Inspection and acceptance will occur at the destination.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
COUPLING ASSEMBLY, S
Solicitation # SPE7M3-26-T-8275
This solicitation, identified as SPE7M3-26-T-8275, is issued by the Department of Defense Fluid Handling Division for the procurement of four self-sealing coupling assemblies under NSN 4730-00-591-0715. The contract requires delivery within 168 days after the order is placed and is subject to full and open competition. Performance is designated for Cherry Point, and the procurement falls under NAICS code 336413. The agreement incorporates several critical technical and quality mandates, including DLA packaging requirements, configuration change management, and strict prohibitions against the use of Class I ozone-depleting chemicals. Notably, the contract contains technical data subject to ITAR or EAR export controls, restricting data access to approved contractors with US/Canada Joint Certification Program certification and completed DOD export-control training. Inspection and acceptance are to be conducted at the origin.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-339P
This contract is for the procurement of one nonmetallic hose assembly, specifically a 0.375 inch size and 240 inches in length. The assembly must be PTFE with CRES reinforcement, rated for 3000 PSI and 400 degrees Fahrenheit, featuring straight-to-straight flared fittings without a sleeve. It must adhere to SAE AS153 Revision K and be produced by an accredited manufacturer or distributor listed on the PRI Qualified Manufacturer List or Qualified Products List. The order requires delivery within 20 days and specifies FOB Origin with inspection and acceptance also occurring at the origin. All items must be free of Class I ozone depleting chemicals and comply with MIL-STD-129 for marking and RP001 for DLA packaging requirements. The final destination for the shipment is Spangdahlem Air Base in Germany, with a required delivery date of August 12, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
ELBOW, PIPE TO TUBE
Solicitation # SPE7M4-26-T-344Z
This contract is for the procurement of seven pipe-to-tube elbows, identified by NSN 4730-01-566-0010 and King Nutronics Corporation part number 3731-41-11. The order is designated as a critical application item and must adhere to specific technical and quality requirements, including strict prohibitions against the intentional addition of mercury or mercury-containing compounds, except where functionally required and approved by NAVSEA. The delivery is set for 168 days after the order, with a required delivery date of March 10, 2027. Shipping is FOB Origin and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Inspection and acceptance will take place at the point of origin.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-26-T-340M
This contract is for the procurement of nonmetallic hoses, identified by NSN 4720-01-391-0860 and part number CM-928010-1, for use on the PP-8125/URC-109(V) power supply cooler. The order consists of three units of length, with each unit defined as 75 millimeters. Delivery is required within 20 days, with a final required delivery date of July 31, 2025, shipped FOB destination to the USS Boxer LHD 4. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It includes a specific prohibition against the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-341J
This contract is for the procurement of 299 feet of metallic tubing, specifically 1/2 inch outer diameter seamless copper tube with a 0.035 wall thickness, designed for air conditioning and refrigeration field service per ASTM B280. The items must be delivered in lengths between 10 and 12 feet with sealed ends. The procurement is designated as a critical application item and requires strict adherence to quality standards, including zero-based sampling plans and the prohibition of mercury and class I ozone-depleting chemicals. Delivery is set for the DLA Distribution center in New Cumberland, Pennsylvania, with a required delivery date of February 25, 2027. The contract specifies that inspection and acceptance will occur at the origin. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-C-3993. Additionally, the supplier must provide metal certification data as outlined in the Contract Data Requirements Lists and the DLA Master List of Technical and Quality Requirements.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details