Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on January 29, 2021. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

CMM Rotary Table

Closed
FA2263-21-Q-0016Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516
New
Federal
Off-Axis Parabolic Mirrors
Solicitation # FA860127Q0003
The Air Force Life Cycle Management Center, on behalf of the Air Force Institute of Technology, is conducting market research via a Sources Sought notice to identify qualified sources for the manufacture and delivery of 66 customized off-axis parabolic mirrors and associated protected-gold coating services. These precision optical components are intended for use in the Extreme Light Laboratory to support ultra-intense laser experiments. The mirrors must feature a 30mm diameter fused-silica substrate with a parabolic focus at 45 degrees, a surface roughness of less than 1nm RMS, and a scratch/dig specification of 20-10. The required protected-gold coating must provide an average reflectivity of at least 97 percent at a wavelength of 780 plus or minus 40nm with a 45-degree angle of incidence. The selected contractor will be responsible for all labor, materials, quality assurance, and transportation to Wright-Patterson Air Force Base, Ohio. Key deliverables include the mirrors and comprehensive test data, including certificates of conformance and surface-measurement data. Delivery is required within 98 calendar days after receipt of order, and the equipment must be warranted against defects for two years following receipt. Payment terms are set at 100 percent after delivery, net 30 days from the invoice date. Interested parties under NAICS code 334516 must submit a capability package by October 23, 2026.
FA8601 Aflcmc Pzio

POSTED

about 6 hours ago

DEADLINE

in 3 days
NAICS: 334516
New
SLED
Laboratory Equipment, Microscope & Accessories (Supply and Install) (Echo Revolve)
Solicitation # 40-27
Solicitation 40-27, issued by the New Hampshire Department of Administrative Services, seeks bids for the supply, delivery, and turn-key installation of an Echo Revolve R4 Upright Microscope and associated accessories for the NH Department of Fish and Game in Concord, New Hampshire. The required equipment is a hybrid fluorescence microscope capable of flipping between upright and inverted modes, featuring a 12.9-inch iPad Pro Retina display. Key deliverables include the microscope system, specific LED light cubes, various objective lenses, an ELWD universal condenser, stage inserts, and a digital haze reduction software module. The successful vendor must complete delivery and installation within 45 business days of the contract award. The contract will be awarded to the responsible vendor who submits a conforming bid meeting all technical specifications at the lowest total cost. Bids are due by October 23, 2026, and must be submitted via email to the Bureau of Purchase and Property. Vendors are required to provide proof of comprehensive general liability insurance of at least 1 million dollars per occurrence and 2 million dollars aggregate, as well as workers compensation insurance. Environmental guidelines encourage the elimination of PVC and polystyrene and the use of SmartWay transport partners. Payment terms are set at 30 days following the receipt of an itemized invoice after the equipment has been delivered, inspected, and accepted by the agency.
Das Purchasing (statewide Bids & Contracts)

POSTED

about 24 hours ago

DEADLINE

in 3 days
NAICS: 334516
New
DIBBS
ANALYZER, GAS
Solicitation # SPE2DH-27-T-0217
Solicitation SPE2DH-27-T-0217 is a request for quotations from the Department of Defense, specifically the Medical Supply Chain FSH, for the procurement of two gas analyzers under NSN 6630-01-671-3921. The required devices must feature an internal pump, a digital LCD display, and the ability for users to select between O2 or air as the carrier gas. These analyzers are designed to measure the concentration percentage of Desflurane, Sevoflurane, Isoflurane, and Halothane. Each unit must be delivered with a sampling tube, a carrying case, and a T-shaped sampling piece. Bidders are required to specify the source and part number being supplied and must provide a complete data package if proposing an alternate part. The contract specifies a delivery period of 88 days with a required delivery date of October 19, 2026, shipped FOB Destination to the USA Medical Materiel Center in Korea. Compliance with Medical Marking Standard No. 1 and MIL-STD-2073-1E for packaging is mandatory, with each unit required to be in a sealed container. The acquisition falls under NAICS code 334516 and incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Inspection and acceptance will occur at the destination point in accordance with FAR 52.246-2.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days

General Info

Contract Value

$81,326

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

OH

Set-Aside

NONE

Award Issued Date

Documents

5

Attachment+1+PD_Rev0_21M-293A-DI.pdf

PDF

Attachment+2+Data+Requirements.pdf

PDF

Attachment+3+Instruction+to+Offerors.docx

DOCX

Combined+SynSol+for+CON-IT.docx

DOCX

Solicitation+-+FA226321Q0016+betaSAM.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA2263 Aflcmc Romk Afmetcal
Contacts2 people available
OfficeHEATH, OH, 43056-6116, USA
Office AddressHEATH, OH, 43056-6116, USA

Full Description

Show more
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in the Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Regulation (FAR), Department of Defense Federal Acquisition Regulation Supplement (DFARS), and the Air Force Federal Acquisition Regulation Supplement (AFFARS). These regulations are available electronically at the Air Force FAR site, http://www.Acquisition.gov. This announcement constitutes the only solicitation for which a Request for Quotation (RFQ) will be issued. It is the offeror's responsibility to monitor this site for the release of amendments (if any). AFMETCAL at Heath OH intends to award a firm fixed price contract under Simplified Acquisition Procedures (SAP) in accordance with FAR Part 13-Simplified Acquisition Procedures and FAR Part 12-Acquisition of Commercial Items, for the purchase of a CMM Rotary Table with technical manual, and standard commercial warranty. The RFQ number is FA2263-21-Q-0016 and shall be referenced on any offer submitted. The North American Industry Classification System (NAICS) code for this acquisition is 334516 and the business size standard is 1,000 employees. Products offered shall be commercial items or commercially available off-the shelf (COTS) items meeting the definitions in FAR Part 2. Items proposed shall be new units. Reconditioned, remanufactured, or used items are not acceptable and shall not be proposed. The units must meet the requirements of Purchase Description 21M-293A-DI Rev 0 dated 28 September 2020, included in List of Attachments, Attachment 1, to the RFQ. The RFQ with applicable documents are available for download at this site. Please review ALL documents carefully. IMPORTANT NOTICE TO OFFERORS: All prospective awardees are required to register at SAM and to maintain active registration during the life of the contract. SAM can be accessed at https://www.beta.sam.gov. Any award resulting from this solicitation will include DFARS Clause 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. Section 1008 of the National Defense Authorization Act of Fiscal Year 2001 requires any claims for payment (invoices) under DoD contract to be submitted in electronic form. Wide Area WorkFlow (WAWF) through Procurement Integrated Enterprise Environment (PIEE) is the DoD system of choice for implementing this statutory requirement. Use of the basic system is at no cost to the contractor. Contractors must complete vendor training, which is also available at no cost at https://piee.eb.mil. Prior to submitting invoices in the production system, contractors must register for an account at https://piee.eb.mil. Notice to offerors: Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs. Offers MUST: be valid for a period of 90 days from closing date, (2) be for the item described in the purchase description (List of Attachments, Attachment 1), (3) be for a new unit (not reconditioned, remanufactured, or used unit), (4) be FOB Destination, (5) include a delivery schedule, if unable to meet delivery schedule in Deliveries and Performance section, (6) include copy of commercial price list, (7) include copy of standard commercial warranty (8) include name of and be signed by an authorized company representative along with telephone number, facsimile number, and email address, (9) include taxpayer identification number (TIN), CAGE Code Number and DUNS Number, (10) include a line-by-line written response to each paragraph of the PD, (11) include completed Supplies or Services and Price/Cost section, (12) include completed FAR 52.212-3, Offeror Representations and Certifications - Commercial Items. Offerors shall ensure information in SAM is current. The Government reserves the right to incorporate the successful offeror's technical proposal into any contract resulting from this solicitation. Offers must be received no later than 2 March 2021 at 2:00 PM Eastern. Offerors shall submit electronic files to DoD SAFE, https://safe.apps.mil. Send a request to Michael Hickey at mihael.hickey.2@us.af.mil and request a DoD SAFE drop-off request code or email link. When your request is processed, you will receive an email with a link to the DoD SAFE location where files can be dropped off. For complete instructions on sending files via DoD SAFE, please refer to https://safe.apps.mil/about.php. Offers submitted in forms other than through DoD Safe are not permissible and will not be considered. Please note that the uploaded files must be timestamped by the offer due date and time. Offerors bare the risk for receipt of submitted offers being untimely. Offerors shall allow sufficient time for receipt of electronic submissions by the due date and time. All responsible sources may submit an offer, which if received timely shall be considered by this agency.

More opportunities from Department Of Defense → FA2263 Aflcmc Romk Afmetcal

Same awarding agency

NAICS: 334515
New
Federal
GA-VGMS-33528
Solicitation # 27M-638A-VA
The Air Force Metrology and Calibration (AFMETCAL) program office is conducting market research via a sources sought synopsis to identify capable vendors for the upgrade of a primary vacuum standard, specifically the GA-VGMS-33528 system. The scope of work involves integrating specific hardware components, including a power supply box, interface cables, a rupture disc, an Inficon ion gauge controller, and a rack rail controller panel. Additionally, the contractor must provide a software upgrade package to correct existing bugs and implement multi-channel analog calibration workflows compatible with Windows 10 or 11 LTSC. The requirement includes on-site engineering services for installation, system validation, and operator training, with final inspection and acceptance occurring at the AFPSL. This is currently a request for information and not a formal solicitation; therefore, no funds are currently available, and responses are not binding offers. Interested vendors under NAICS 334515 must provide a comprehensive capability statement, including their business size, CAGE code, SAM status, and a rough order of magnitude price for one unit over a one-year period. Technical requirements mandate that all test equipment used for validation must have first echelon certification traceable to NIST or an equivalent international laboratory. Responses are due by November 17, 2026, and should be directed to the listed contract specialists.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

4 days ago

DEADLINE

in 28 days
View Details
NAICS: 334515
New
Federal
Vacuum Turbo Pumps
Solicitation # 27M-083A-VA
The Air Force Metrology Calibration Program (AFMETCAL) is conducting market research via a Sources Sought synopsis to identify potential providers for Turbomolecular Pumping Stations (TMPS). This acquisition aims to replace the discontinued Agilent Technologies/Varian TPS-compact TV301 to support high-vacuum and vacuum metrology calibration equipment across the Air Force. The requirement is for a fully integrated, oil-free, plug-and-play benchtop system consisting of a turbomolecular high-vacuum pump with a pumping speed of at least 215 L/s for Nitrogen, a dry scroll backing pump with a rotational speed of at least 56,000 RPM and an ultimate pressure of 0.1 mbar or better, an integrated system controller, and a separate variable leak valve. Technical specifications include an ISO-LF DN 100 high-vacuum inlet and nominal 115 VAC power requirements. The estimated quantity is 86 units over five years, and reconditioned or used materials are strictly prohibited. Interested vendors under NAICS 334515 must submit a capability statement, rough order of magnitude pricing, and detailed company information by November 13, 2026. Key requirements include a minimum two-year warranty from delivery, the provision of a COTS operator's manual, and adherence to NIST-traceable certification standards for test equipment. Each unit must be clearly labeled with the model number, serial number, manufacturer's name, and warranty expiration date. All responses should be directed to the listed contract specialists and reference 27M-083A-VA.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

6 days ago

DEADLINE

in 24 days
View Details
NAICS: 541611
Federal
Knowledge Transfer and Documentation for Future CompetitionThe contract requires the development of comprehensive technical documentation for the LBIR facility, covering its operations, calibration procedures, and system designs to ensure a smooth transition and enable future competition. The deliverables must be detailed enough to support knowledge transfer to new operators or contractors, ensuring continuity of function, maintenance, and technical integrity without reliance on current institutional knowledge. All documentation must be precise, standardized, and structured to facilitate understanding by technical personnel unfamiliar with the facility. This subcontract is tied to the Department of Defense through the agency FA2263 Aflcmc Romk Afmetcal and is focused on work performed in Gaithersburg. The North American Industry Classification System code 541611 indicates it is related to scientific and technical consulting services, specifically management and technical consulting. Although the solicitation number is not provided, the contract was posted on July 30, 2026, signaling preparatory activity ahead of anticipated future procurement cycles. The documentation produced under this effort will serve as a foundational asset for any subsequent vendor or team taking over facility operations, emphasizing clarity, completeness, and technical accuracy.
Administrative Management and General Management Consulting Services

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541715
Federal
Optical and Radiometric Systems Engineering SupportThe contract seeks engineering support for the development and optimization of low-background infrared measurement systems used in radiometric calibration, with a focus on optical design, alignment precision, and performance enhancement. The work involves advanced technical expertise in infrared optics to ensure systems meet stringent calibration standards, minimizing background noise and maximizing measurement accuracy for critical defense and scientific applications. The contractor will be responsible for iterative design improvements, system-level testing, and collaboration with technical teams to achieve optimal radiometric outcomes. This subcontract is issued under the Department of Defense through the agency FA2263 Aflcmc Romk Afmetcal, with performance located in Gaithersburg. The work falls under the NAICS code 541715, indicating it is centered on research and development in physical, engineering, and life sciences. The contract was posted on July 30, 2026, and is intended to support specialized instrumentation needs where high-sensitivity infrared measurements are essential for calibration integrity. No set-aside provisions are specified, and the procurement remains open to qualified subcontractors capable of delivering high-precision optical engineering solutions.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

3 months ago

DEADLINE

N/A
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS