Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

CMP Connecting Bands and Hardware Supplier

Active

State & Local

Response Deadline10/19/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract agreement establishes a supplier for annular corrugated connecting bands and fastening hardware to support prime contractors on MoDOT Southwest District projects. The scope of work requires the provision of aluminized or metallic-coated steel bands with a minimum width of 24 inches and specific corrugations of 2 2/3 by 1/2 inch. Each band must include four nuts and bolts and be compatible with pipe diameters ranging from 15 to 48 inches. All supplied materials must strictly comply with MoDOT Specifications Sections 725, 1020, and 1022, with the supplier responsible for delivering the hardware to designated MoDOT locations. The solicitation was posted on October 5, 2026, with a response deadline of October 19, 2026. This procurement falls under NAICS code 332996 and is managed by the Missouri Department of Transportation.

General Info

Supplier provides corrugated connecting bands and hardware for MoDOT Southwest District projects.

Agency

Missouri → MODOT SOUTHWEST DISTRICT

NAICS

332996 - Fabricated Pipe and Pipe Fitting Manufacturing

Place of Performance

MO, USA

Set-Aside

NONE

Documents

This scope was carved out of MODOT SW 0000000058SL.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Corrugated Metal Pipe - Western Area - Southwest District

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 5

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 01:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMissouri → MODOT SOUTHWEST DISTRICT

ContactsNo contacts available

OfficeN/A

Organization / AgencyMissouri → MODOT SOUTHWEST DISTRICT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies annular corrugated connecting bands and fastening hardware for prime contractors on MoDOT Southwest District projects. Provides aluminized/metallic-coated steel bands minimum 24 inches wide with 2 2/3 by 1/2 inch corrugations, including 4 nuts and bolts per band for pipe diameters 15" through 48". Complies with MoDOT Specifications Sec 725, 1020, and 1022. Delivers hardware to designated MoDOT locations.

Similar Contracts

Same NAICS industry code

Supply of Moisture Traps (NSN 4730-01-244-9407)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

Metal Tube Assembly Supplier (NSN 4710123240188)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Supply of Metallic Bent Tubes (NSN 4710013663520)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

Stainless Steel Adapter Bushing Supply

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Supplier of Quick Coupling Half (Female)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

TUBE, BENT, METALLIC

Solicitation # SPE7M0-27-T-0165

Solicitation SPE7M0-27-T-0165 is a fixed-price request for quotation issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for one metallic bent tube, identified by NSN 4710-01-366-3520 and associated with L3Harris Technologies part numbers 106579 and 106579-5. The required delivery date is October 2, 2026, with a delivery lead time of 10 days after order. The item is to be delivered to the GA ARNG MATES 1 facility at Fort Stewart, Georgia, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically requiring packaging per ASTM D3951 and marking per MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Environmental restrictions prohibit the use of Class I ozone depleting chemicals. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Offerors must submit quotes via the DLA Internet Bid Board System and comply with various federal regulations, including the Buy American Act, the Berry Amendment, and cybersecurity standards for safeguarding covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

ADAPTER BUSHING

Solicitation # SPE7M3-27-T-0098

Solicitation SPE7M3-27-T-0098, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of 28 stainless steel adapter bushings, 2-inch in size, under NSN 4730-01-120-2876. The contract requires delivery within 140 days after order, with a need ship date of March 9, 2027, and a final required delivery date of April 6, 2027. Shipping is FOB Origin, with the destination for both inspection and acceptance located in Tracy, California. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. This requirement involves strict export control regulations, as technical data is subject to ITAR or EAR restrictions. Consequently, contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training to access the data. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Additionally, the solicitation emphasizes compliance with the Buy American Act and the Berry Amendment, requires CMMC Level 2 cybersecurity standards, and offers a price evaluation preference for certified HUBZone small business concerns.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L3-27-T-0148

Solicitation SPE7L3-27-T-0148 is a Request for Quotations issued by the DLA Weapons Support Land Supplier Opns Vehicle Spt for the procurement of three moisture traps, identified by NSN 4730-01-244-9407 and part number 322-07609-000. The contract specifies a need ship date of April 21, 2026, with an original required delivery date of September 7, 2026. Delivery is established as FOB Origin under the First Destination Transportation program, with the final destination, inspection, and acceptance point located at DLA Distribution San Joaquin in Tracy, California. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Palletization must comply with DLA requirement RP001. A critical material restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional components. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding combating trafficking in persons, sustainable products, and the safeguarding of covered defense information. All quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7M4-27-T-0239

This fixed-price solicitation, issued by the DLA Weapons Support Fluid Handling Division, seeks the procurement of 51 tube reducers under NSN 4730-00-821-7554. The acquisition is conducted through full and open competition, with a required delivery date of June 25, 2026, and a need ship date of September 30, 2026. Delivery is set for 110 days after order, with FOB Origin terms and destination inspection and acceptance at the DLA Distribution Depot Oklahoma at Tinker AFB. The item is classified as a commercial critical application item and must adhere to specific technical drawings and Class 3 thread requirements. Contractors must comply with rigorous quality and packaging standards, including MIL-STD-129 for marking, ASTM D3951 for packaging, and RP001 for palletization. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based plan. Notably, the use of Class I ozone-depleting chemicals and additive manufacturing processes is strictly prohibited. Evaluation includes a price preference for certified HUBZone small businesses. All payment requests and receiving reports must be processed electronically via the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

COUPLING HALF, QUICK

Solicitation # SPE7M1-27-T-0194

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7M3-27-T-0099

Solicitation SPE7M3-27-T-0099 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of 192 pipe elbows, identified by NSN 4730-01-026-0922. The contract requires delivery within 188 days after order, with a required delivery date of April 26, 2027, shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. This procurement is a candidate for automated award and provides a price evaluation preference for certified HUBZone Small Business Concerns. Notably, items produced via additive manufacturing are ineligible for award. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List and requires packaging and marking in accordance with MIL-STD-2073-1E and MIL-STD-129. Contractors must comply with export controls under ITAR and EAR, as well as cybersecurity standards including DFARS 252.204-7012. Environmental and safety restrictions prohibit the use of Class I ozone-depleting chemicals and hexavalent chromium. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. Additionally, offerors must comply with the Buy American Act and the Berry Amendment, disclosing any non-domestic materials used in their quotes.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

TUBE, BENT, METALLIC

Solicitation # SPE7M4-27-T-0238

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

More opportunities from Missouri → MODOT SOUTHWEST DISTRICT

Same awarding agency

Specialized Freight and Delivery (Drop-Off Services)

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Aluminized Corrugated Metal Pipe Supplier

Fabricated Structural Metal Manufacturing

POSTED

about 20 hours ago

DEADLINE

Corrugated Metal Pipe - I-44 Corridor Area - Southwest District

Solicitation # MODOT SW 0000000055SL

The Missouri Department of Transportation Southwest District is soliciting bids for a one-time purchase of aluminized corrugated metal pipe, metallic-coated corrugated metal culvert pipe, pipe-arches, and appurtenances for maintenance purposes. The procurement, identified as solicitation MODOT SW 0000000055SL, requires materials to be delivered to various MoDOT maintenance shed addresses. Key technical requirements include compliance with MoDOT Specifications Section 725, 1020, and 1022, as well as General Services Specification MGS9111 and AASHTO M36 for arch pipes. Specifically, pipe lengths must be in 21-foot increments, and connecting bands must be 24 inches wide with four nuts and bolts. The contract will be awarded on a firm fixed pricing, low-bid basis to a responsible vendor whose products are already listed on MoDOT's approved list. Bidders must adhere to the Domestic Product Procurement Act for purchases exceeding 25,000 dollars and provide certification against discrimination against Israel for contracts valued at 100,000 dollars or more. Payment terms are Net 45, with payments made in arrears via electronic funds transfer. Bids must be submitted by October 20, 2026, and must remain valid for 90 days from the bid opening.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 20 hours ago

DEADLINE

Polypropylene Pipe - I-44 Corridor Area - Southwest District

Solicitation # MODOT SW 0000000056SL

POSTED

about 20 hours ago

DEADLINE

Polypropylene Culvert Pipe SupplierThis subcontract agreement establishes a supplier for polypropylene culvert pipe to support prime contractors on MODOT Southwest District projects. The scope of work involves the manufacture or sourcing of 15-inch, 18-inch, and 24-inch pipes that must strictly adhere to ASTM F 2766 double wall and ASTM F 2764 triple wall standards. The supplier is responsible for performing all necessary sampling and testing in accordance with ASTM F 2736 and providing certifications of compliance. The contract requires the delivery of 400 total linear feet of pipe and mandates the completion of a Buy American Form to ensure domestic procurement compliance. Interested parties must respond by October 19, 2026, for this opportunity categorized under NAICS code 326122.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Aluminized Corrugated Metal Pipe (CMP) SupplierThis subcontract agreement establishes a partnership for the supply of aluminized round and arch corrugated metal culvert pipes to prime contractors operating within the MoDOT Southwest District. The scope of work includes the manufacture and delivery of pipes in diameters of 15, 18, 24, 36, and 48 inches, provided in 21-foot increments. All materials must be delivered directly to designated MoDOT maintenance sheds. Strict adherence to technical standards is required, specifically MoDOT Specifications Sections 725, 1020, and 1022. Additionally, pipe ends must meet annular corrugation standards, and all arch pipes must comply with AASHTO M36 regulations. The solicitation was posted on October 5, 2026, with a response deadline of October 19, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Corrugated Metal Pipe - Western Area - Southwest District

Solicitation # MODOT SW 0000000058SL

The Missouri Department of Transportation Southwest District is soliciting bids for a one-time purchase of aluminized corrugated metal pipe and culverts for maintenance purposes. The scope includes various sizes and lengths of round and arch pipes, as well as connecting bands, to be delivered FOB destination to maintenance sheds in Butler, Carthage, Lamar, and Nevada, Missouri. All products must strictly adhere to MoDOT specifications, including Sections 725, 1020, and 1022, and metal arch pipes must comply with AASHTO M36 dimensional requirements. This solicitation is conducted on a firm fixed pricing, low bid basis, with awards determined by the lowest price that meets all mandatory specifications and vendor responsibility criteria. Bidders must certify that end products are manufactured in the United States per the Domestic Product Procurement Act and comply with all state and federal non-discrimination laws. Required documentation includes certifications regarding employment eligibility and anti-discrimination. Payment terms are Net 45, with invoices submitted in arrears referencing the purchase order number. Bids must be submitted via the MissouriBUYS portal by October 19, 2026, and pricing must remain valid for at least 60 days.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Polypropylene Pipe - Western Area - Southwest District

Solicitation # MODOT SW 0000000057SL

The Missouri Department of Transportation Southwest District is soliciting bids for a one-time purchase of polypropylene culvert pipes under solicitation number MODOT SW 0000000057SL. The requirement includes various pipe diameters, specifically 15-inch, 18-inch, 24-inch, 30-inch, and 36-inch pipes, with quantities ranging from 60 to 200 linear feet depending on the size. All products must be sourced from MoDOT approved manufacturers and adhere to ASTM F 2766 for double wall pipe, ASTM F 2764 for triple wall pipe, and ASTM F 2736 or ASTM F 2764 for sampling and testing. Delivery is required FOB destination freight prepaid to designated MoDOT Maintenance sheds, including a specific location in Lamar, Missouri. The contract will be awarded on a firm fixed pricing, low bid basis to a responsible vendor who meets all mandatory technical specifications. Bidders must comply with the Domestic Products Procurement Act, and those with bid totals of $25,000 or more must submit Exhibit N; non-eligible items may face a 10 percent price increase during evaluation. Additional requirements include certification regarding the Anti-Discrimination Against Israel Act and adherence to state and federal nondiscrimination statutes. Acceptance of materials is contingent upon certification, identification markings, and engineer-approved test results. Payment terms are Net 45, with invoices submitted in arrears referencing the purchase order number. Bids must be submitted by October 19, 2026, via the MissouriBUYS system or hard copy.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Freight and Delivery Services for CMPThis subcontract for Freight and Delivery Services for CMP involves the transportation of heavy aluminized metal piping for prime contractors working on MoDOT Southwest District maintenance projects. The selected provider will be responsible for loading and transporting large-diameter round and arch corrugated metal pipes using flatbed trucks or specialized trailers to various MoDOT maintenance shed addresses. A critical requirement of the scope is ensuring that aluminized coatings remain protected during transit and that all materials are properly delivered and offloaded at designated sites. The opportunity is categorized under NAICS code 484220 and was posted on October 1, 2026, with a response deadline of October 15, 2026. This project is managed by the Missouri Department of Transportation Southwest District.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply and Delivery of Aluminized Corrugated Metal Pipe (CMP)This subcontract involves the supply and delivery of aluminized corrugated metal pipe and related appurtenances for prime contractors working on MoDOT Southwest District maintenance projects. The scope of work requires the manufacture or sourcing of 12-inch round, 30-inch round, and 49-inch x 33-inch arch pipes, all of which must adhere to MoDOT Specification MGS9111. Additionally, all provided materials must comply with the Buy American Act and the Domestic Product Procurement Act. The selected provider is responsible for delivering the materials directly to designated MoDOT maintenance sheds. This opportunity is categorized under NAICS code 331210 and was posted on October 1, 2026, with a response deadline of October 15, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

Specialized Freight Hauling for Culvert PipeThis subcontract for Specialized Freight Hauling for Culvert Pipe involves the transportation of oversized 20-foot polypropylene pipe sections for prime contractors working on MoDOT Southwest District projects. The selected provider will utilize flatbed trucks to deliver these materials to specific maintenance sheds located in Osceola, Clinton, Preston, and Warsaw. The contractor is responsible for managing all bills of lading and delivery receipts to ensure proper MoDOT identification and must strictly adhere to established delivery schedules. Requirements for this engagement include maintaining standard DOT hauling certifications and ensuring all materials are delivered to the designated site addresses.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Polypropylene Culvert Pipe SupplierThis subcontract agreement with the MoDOT Southwest District involves the supply and delivery of double-wall polypropylene culvert pipes for prime contractors. The scope of work includes providing bell and spigot type pipes in sizes ranging from 15 to 48 inches, along with all necessary couplings and fittings. All materials must adhere to ASTM F 2766 and MoDOT Specifications Sections 724 and 1041, with itemized shipments delivered directly to designated maintenance sheds. The solicitation was posted on October 1, 2026, with a response deadline of October 15, 2026. A critical requirement for this contract is the certification of domestic product origin for any bids exceeding 25,000 dollars. The project falls under NAICS code 326122 and is managed by the state of Missouri.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS