Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

COIL ASSEMBLY, MAIN

Active
SPE7M1-26-T-277RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of seven main coil assemblies, identified by NSN 1630-01-036-0262 and part number 40-57710 from Hydro-Aire Aerospace Corp. These critical application items are magnetic coil units measuring approximately 2 inches in diameter by 5 inches in length, designed to sense wheel rotational speed and interface with aircraft wiring harnesses. The solicitation, numbered SPE7M1-26-T-277R, specifies a delivery timeline of 373 days with a required delivery date of September 2, 2027, to the DLA Distribution Depot at Hill AFB, Utah. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and MIL-STD-129. Compliance with cybersecurity protocols is required, specifically the CMMC Level 2 Self-Assessment and regulations regarding covered defense information. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination. All packaging must follow ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials.

General Info

Hydro-Aire Aerospace will supply seven coil assemblies to Hill AFB by September 2027.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE7M1-26-T-277R

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
Michael Reese
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COIL ASSEMBLY,MAIN
COIL ASSEMBLY,MAIN
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
2 IN DIA X 5 IN LONG APPROX CONTAINS A MAGNETIC COIL UNIT FOR SENSING
WHEEL ROTATIONAL SPEED CONTAINS ELECTRICAL CONNECTOR TO MATE WITH THE
AIRCRAFT WIRING HARNESS
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CRITICAL APPLICATION ITEM
HYDRO-AIRE AEROSPACE CORP 81982 P/N 40-57710
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017868965 0001 EA 7.000
NSN/MATERIAL:1630010360262
DELIVERY (IN DAYS):0373
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7M1-26-T-277R
SECTION B
PR: 7017868965 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML 385-519-8103
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:09/02/2027 Original Required Delivery Date:09/02/2027
SPE7M1-26-T-277R NSN/Part Number: 1630-01-036-0262 Quantity: 7 EA Purchase Request: 7017868965QTY: 7 Delivery: 373 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AI
Solicitation # SPE4A6-26-T-16SB
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of three structural aluminum plates under NSN 1560-01-723-7586. The contract requires delivery within 198 days after receipt of order and is categorized under NAICS code 336413. Performance is to take place in New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific packaging standards. Notably, the item contains technical data subject to ITAR and EAR export controls, meaning access is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A7-26-T-651M
This contract is for the procurement of 180 units of structural support components for aircraft, identified by NSN 1560-01-589-6096 and part number UH1-2000-4 from Paravion Technology Inc. The agreement specifies a delivery timeframe of 174 days after order, with a required delivery date of November 12, 2026, and a need ship date of February 12, 2027. Shipping is FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including CMMC Level 2 self-assessment for cybersecurity and specific documentation for source approval. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, emphasizing zero non-conformances for acceptance. Packaging must comply with MIL-STD-129 and RP001, with specific requirements for hazardous materials under FED-STD-313 or commercial packaging via ASTM D3951.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
DOOR, ACCESS, AIRCRAF
Solicitation # SPE4A5-26-T-353D
This contract is for the procurement of two aircraft access doors, identified by NSN 1560-01-652-9408 and Boeing part numbers 114T2401-1 and 114T2401-4. These are classified as critical application items requiring FAA airworthiness approval and a Certificate of Airworthiness and Conformance. The procurement is managed by the Department of Defense ASC Supplier Oper OEM Division, with delivery scheduled for February 14, 2029, to the DLA Distribution Depot at Tinker AFB, Oklahoma. The agreement mandates strict adherence to technical and quality requirements, including supply chain traceability documentation and specific FAA bare item marking. Packaging and palletization must comply with MIL-STD-129 and DLA procurement standards. Quality assurance will be conducted via a zero-based sampling plan according to MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Item Unique Identification is not required for this specific order.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
CAP, FILLER, PUMP HOU
Solicitation # SPE4A5-26-T-353R
This contract is for the procurement of one pump housing filler cap, identified by NSN 1610006287747 and Hamilton Sundstrand part number 513676. The item is designated as a critical application item and must be delivered FOB Origin to the specified location in East Granby, Connecticut, within 20 days. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for sampling, measuring and test equipment, and cybersecurity maturity model certification level 2 self-assessment. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA procurement requirements. Item Unique Identification is not required for this order.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
RETAINER ASSY
Solicitation # SPE4A7-26-T-652A
This contract is a solicitation for the procurement of 33 units of a Retainer Assembly, identified by NSN 1680-01-568-7312. The requirement specifies parts from Hydraulics International, Inc. (P/N 8WA1808) or Siemens Industrial Automation Inc (P/N SWA1808). The delivery is required within 96 days, with a final need date of November 26, 2026, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for sample lots. Inspection and acceptance will occur at the destination, and the contract allows for no quantity variance.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A7-26-T-652J
This solicitation, identified as SPE4A7-26-T-652J, is for the procurement of 44 units of part number 0001S00000061 with a delivery timeline of 433 days after order. The contract requires the contractor to provide current dealer or distributor certification and specifies that Fast Pay is not applicable. A critical requirement of this agreement is the First Article Approval process, which mandates the delivery of two units to the Fleet Readiness Center East in Cherry Point, North Carolina, within 90 calendar days of the contract date. The government will notify the contractor of approval or disapproval within 195 days of receipt. Following First Article approval, the contractor must undergo Production Lot Testing, which involves the random selection of two samples by the Quality Assurance Representative to validate quality conformance. These samples must be shipped to the same North Carolina location with comprehensive documentation, including test reports and material certifications.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M2-26-Q-0675
This contract is for the procurement of 14 aircraft pistons under solicitation SPE7M2-26-Q-0675, with a delivery timeline of 800 days after order. The item is a restricted source part requiring engineering source approval by the government design control activity and must adhere to NAVAIR Aircraft Launch and Recovery Equipment traceability standards. Strict serialization and packaging traceability are mandatory, and contractors are prohibited from rebranding parts in a way that obscures original OEM markings. Compliance requirements include CMMC Level 2 certification, SAE AS9100 quality standards, and Non-Destructive Testing accreditation. The contract strictly prohibits the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except in specific authorized functional applications. Additionally, the technical data is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed mandatory export-control training.
NUCLEAR REACTOR PROGRAM

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336413
New
DIBBS
LONGERON
Solicitation # SPE4A7-26-T-651Y
This solicitation, numbered SPE4A7-26-T-651Y, is issued by the Department of Defense for the procurement of one Longeron, identified by NSN 1560-01-422-4167. The contract requires delivery within 85 days after receipt of order and is managed by the ASC Supplier Oper AE and AF Div. Performance is designated for Tinker AFB. The agreement is subject to strict technical and quality requirements as outlined in the DLA Master List. Key compliance mandates include CMMC Level 2 certification, adherence to Covered Defense Information standards, and specific packaging and marking protocols. Furthermore, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized DOD export-control training.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
ELBOW, PIPE TO HOSE
Solicitation # SPE7M3-26-T-8246
This contract is for the procurement of pipe-to-hose elbows made from cadmium-plated copper alloy, featuring a 90-degree flow angle with a 3/8 inch ID hose size and a 1/4 inch nominal pipe size. The items are designated as critical application components and must be produced by an accredited manufacturer listed on the PRI Qualified Manufacturer List or Qualified Products List. The total quantity required is 153 units, split between two delivery locations: 71 units to DLA Distribution Barstow and 82 units to DLA Distribution Albany. The delivery period is set at 161 days after the order, with a required delivery date of May 12, 2027. Compliance with various military standards is mandatory, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and requires adherence to DLA packaging requirements. Shipping is FOB Origin, and inspection and acceptance will occur at the destination.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, SEAT ASSY
Solicitation # SPE7L4-26-T-6315
Solicitation SPE7L4-26-T-6315 is a federal request for 37 units of seat assembly support, identified by NSN 1680-01-110-1489, with a delivery window of 306 days after order. The procurement is managed by the Department of Defense under the LSO Combat Vehicles and Armament agency, with performance located in Cherry Point. Offerors are encouraged to provide quantity ranges to accommodate potential demand volatility and must disclose any non-domestic materials to comply with the Buy American Act and Berry Amendment restrictions. Key compliance requirements include a representation against providing covered telecommunications equipment and strict adherence to domestic material restrictions. Small business joint ventures must provide specific certifications under FAR 52.212-3 and 52.219-1. Additionally, contractors must prepare for a transition to the Account Management and Provisioning System for VSM access and are prohibited from using additive manufacturing processes unless specifically authorized. Quotes are submitted via DIBBS, and those unable to quote by the deadline are asked to submit a No Bid with an anticipated date to maintain communication with buyers.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
PANEL, STRUCTURAL, AIRCRAFT
Solicitation # SPE4A7-26-R-0721
This solicitation, issued by the Department of Defense ASC Supplier Oper AE and AF Div, is for the procurement of one structural aircraft panel under NSN 1560-01-618-5240. The contract is designated as a total small business set-aside with a delivery requirement of 780 days after order. The solicitation was posted on August 13, 2026, with a response deadline of September 15, 2026. The agreement incorporates several critical technical and quality requirements from the DLA Master List, including specific standards for packaging, source approval documentation, configuration change management, and inspection and acceptance at origin. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to hold an approved US/Canada Joint Certification Program certification and complete mandatory export-control training. While covered defense information applies, item unique identification is not required for this specific procurement.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
DIBBS
PARTS KIT, WING
Solicitation # SPE4A7-26-R-0706
The contract pertains to a Parts Kit, Wing for the FA-18 aircraft, identified by NSN 1560-016852166 and part number 4154AS0113-1, manufactured in strict accordance with drawing number 30003 4154AS0113, Revision F dated December 16, 2025. This procurement is structured as an Indefinite Quantity Contract with a three-year base period and no options, targeting an estimated annual quantity of 80 units. Delivery of production units must occur within 300 days, with FOB origin terms and inspection and acceptance also conducted at the point of origin. The solicitation is designated as a total small business set-aside, and access to technical data required for manufacturing is restricted to contractors certified under DoD 5220.22M, necessitating submission of DD Form 2345 to the Defense Logistics Information Services. The solicitation, identified as SPE4A726R0706, will be issued on or about August 13, 2026, and is exclusively available through the DLA Internet Bid Board System; no paper copies will be provided. Proposals must be submitted by September 14, 2026, and all communication and documentation must be handled via the online portal. The contracting office is located in Richmond, Virginia, under the Department of Defense, with Ryan Loeffelholz listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334418
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M1-26-Q-0903
This solicitation is for the procurement of five circuit card assemblies under solicitation number SPE7M1-26-Q-0903 for the Department of Defense Maritime Supply Chain. The items must be delivered within 350 days after order and are designated as restricted source items requiring engineering source approval by the government design control activity. Surplus materials are strictly prohibited, and all supplies must adhere to NAVAIR Aircraft Launch and Recovery Equipment traceability requirements. Bare items must be marked with the contract number, NAWC CAGE, and part number, though technical data drawings take precedence in the event of a conflict. The contract incorporates several DLA technical and quality requirements, including specific packaging standards and configuration change management. Additionally, the technical data is subject to strict export controls under ITAR or EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed mandatory export-control training.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-280Z
This contract is a solicitation issued by the Department of Defense Maritime Supply Chain for the procurement of one fluid filter element under NSN 4330-00-416-7309. The requirement specifies several acceptable manufacturers and part numbers, including options from Facet LLC, Kaydon Custom Filtration Corporation, Deluxe Products Div Walker Mfg Co, Wix Corp, Baldwin Filters Inc, and Hatch and Kirk Inc. The delivery is required within 20 days after order, with a required delivery date of August 11, 2026, and shipping is designated as FOB Origin. The order must adhere to strict technical and quality requirements as outlined in the DLA Master List, specifically regarding packaging and palletization under RP001 and ASTM D3951 standards. All packaging must be marked and labeled according to MIL-STD-129 and shipped via traceable means to the designated address in Egg Harbor Township, New Jersey. Inspection and acceptance will take place at the destination.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334519
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-281F
This contract is a solicitation for the procurement of one magnetic contactor, identified by NSN 6110-01-456-7570 and part number A275KXX91-120. The item is designated as a critical application item and is associated with Nu-Torque Inc and Curtiss-Wright Flow Control Corporation. Delivery is required within 20 days after receipt of order, with the final destination being the USS George Washington CVN 73. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-tolerance policy for non-conformances in sample lots. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA.
Other Measuring and Controlling Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-281M
This contract is for the procurement of electrical wire under solicitation SPE7M1-26-T-281M for the Department of Defense. The requirement consists of two line items totaling 36,999.9 feet of wire identified by NSN 6145009176378, with a quantity variance allowed of plus or minus 5 percent. The material is designated as a critical application item and must comply with SAE AS22759/5A and SAE AS22759E standards. Delivery is required within 130 days, with shipments destined for DLA Distribution facilities in Tracy, California, and New Cumberland, Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, specifically MIL-STD-2073-1E, MIL-STD-129 for marking, and MIL-DTL-12000 for cable and wire preservation. Depending on the assigned advice code, the material must be provided in continuous lengths, as multiple unit packs may be unacceptable. The item is listed on a Qualified Products List or Qualified Manufacturers List, meaning only approved sources are eligible. Terms include FOB Origin shipping and destination-based inspection and acceptance.
Other Aluminum Rolling, Drawing, and Extruding

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331318
New
DIBBS
MAGNET WIRE
Solicitation # SPE7M1-26-T-281N
This contract, identified as SPE7M1-26-T-281N, is a solicitation for the procurement of 13 reels of number 15 AWG electrical magnet wire, part number MW016CHX000015UNC. Each reel contains 75 pounds of material and must be provided in a continuous length. The requirement is designated as a critical application item and must adhere to NEMA MW1000 standards. Delivery is required within 145 days, with a need ship date of January 17, 2027, and a final delivery destination of DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E and MIL-DTL-12000 for cable and wire preservation. It incorporates specific technical and quality requirements via the DLA Master List and prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. The procurement is conducted under full and open competition and requires marking in accordance with MIL-STD-129.
Other Aluminum Rolling, Drawing, and Extruding

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR, F
Solicitation # SPE7M1-26-T-281P
This contract, identified as SPE7M1-26-T-281P, is a solicitation from the Department of Defense Maritime Supply Chain for the procurement of five F-type connector adapters. The items are identified by NSN 6060015691025 and part number PE9444 from Infinite Electronics International. Delivery is required within 15 days after the order, with a required delivery date of September 9, 2026. The shipment is destined for the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with FOB Origin terms. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements and technical quality standards. Inspection and acceptance will occur at the destination.
Electronic Connector Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
PUMP, RECIPROCATING
Solicitation # SPE7M1-26-Q-1367
This contract, identified as SPE7M1-26-Q-1367, is a firm fixed price procurement for six reciprocating pumps, part number 4320-01-272-3909. The delivery is required within 30 days after receipt of the order, with a need date of October 8, 2026. Inspection and acceptance will take place at the destination, and the items are to be shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including DLA packaging standards RP001 and the removal of government identification from non-accepted supplies per RQ011. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except in specific functional components authorized by NAVSEA. Packaging and preservation must comply with MIL-STD-2073-1E, MIL-STD-129, and Federal Specification MIL-P-16789.
Fluid Power Pump and Motor Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334515
New
DIBBS
METER, SPECIAL SCALE
Solicitation # SPE7M1-26-T-281U
This solicitation, issued by the Department of Defense Maritime Supply Chain, is for the procurement of 17 special scale meters under NSN 6625-00-422-1421. The contract requires delivery within 161 days after the order is placed and specifies performance in Tracy, California. The procurement is governed by NAICS code 334514 and includes strict adherence to DLA packaging requirements, the protection of covered defense information, and the removal of government identification from non-accepted supplies. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with specific exceptions for functional mercury used in batteries, sensors, or weapon systems as specified by NAVSEA. Additionally, any portable instruments containing mercury must be shock-proof and feature a second boundary of containment. Offerors providing alternate parts must submit a complete data package for both the approved and alternate components.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-281Q
This contract is for the procurement of 64,000 feet of electrical wire, identified by NSN 6145-01-195-3394 and part number M22759/43-20-9. The material must adhere to SAE AS22759/43B and SAE AS22759E standards and is designated as a critical application item. The order requires a quantity variance of plus or minus 5 percent, with a delivery timeline of 184 days after order. The wire must be provided in 500-foot spools with a minimum length of 100 feet. Depending on the specific advice code, the material must be supplied in continuous lengths, as multiple unit packs may be unacceptable. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and MIL-DTL-12000, with final delivery and inspection occurring at the destination in New Cumberland, Pennsylvania. This procurement is subject to DLA master technical and quality requirements, including specific packaging and configuration change management protocols.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M1-26-T-281J
This contract is for the procurement of two circuit card assemblies, identified by NSN 5998013467999 and Lockheed Martin part number 16E4014-3. The order is managed under solicitation SPE7M1-26-T-281J with a required delivery date of April 20, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination. The agreement mandates strict adherence to technical and quality requirements, including Item Unique Identification and MIL-STD-130 standards. Due to the sensitive nature of the electronics, the supplier must utilize DOD qualified electrostatic discharge and electromagnetic interference protective packaging in accordance with MIL-PRF-81705 and MIL-STD-129. All shipments must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania.
Bare Printed Circuit Board Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-281V
This contract, identified as SPE7M1-26-T-281V, is a solicitation from the Department of Defense Maritime Supply Chain for the procurement of 13 fluid filter elements. The required items are specified as NSN 4330-01-706-0954, corresponding to Eaton Filtration LLC part number 01.NL.250.10API.30.E.P. This is designated as a critical application item with a required delivery date of October 9, 2026, and a delivery window of 45 days. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E and MIL-STD-129 for marking. Shipping is FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals in the manufacturing or delivery of the items, requiring approved substitutes if necessary.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
PARTS KIT, COMPRESSOR
Solicitation # SPE7M1-26-T-281T
This contract is for the procurement of 25 compressor parts kits under solicitation SPE7M1-26-T-281T for the Department of Defense Maritime Supply Chain. A critical technical exception is noted where compressor part number SKI 4025S from CAGE 64678 must be supplied instead of part number SKI 4073S. The delivery is required within 413 days, with a need ship date of October 12, 2027, shipping FOB Origin to DLA Distribution Red River in Texarkana, Texas. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1, and MIL-STD-129 marking standards. Quality compliance is governed by ISO 9001:2015 and the DLA Master List of Technical and Quality Requirements. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and requires compliance with covered defense information and configuration change management protocols. This is a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 333996.
Fluid Power Pump and Motor Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details