Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WIRE, ELECTRICAL

Active
SPE7M1-26-T-281QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 64,000 feet of electrical wire, identified by NSN 6145-01-195-3394 and part number M22759/43-20-9. The material must adhere to SAE AS22759/43B and SAE AS22759E standards and is designated as a critical application item. The order requires a quantity variance of plus or minus 5 percent, with a delivery timeline of 184 days after order. The wire must be provided in 500-foot spools with a minimum length of 100 feet. Depending on the specific advice code, the material must be supplied in continuous lengths, as multiple unit packs may be unacceptable. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and MIL-DTL-12000, with final delivery and inspection occurring at the destination in New Cumberland, Pennsylvania. This procurement is subject to DLA master technical and quality requirements, including specific packaging and configuration change management protocols.

General Info

Procurement of 64,000 feet of electrical wire delivered to New Cumberland, Pennsylvania.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

331491 - Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7M1-26-T-281Q.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
Alisha Blanton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WIRE,ELECTRICAL
WIRE, ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THIS NSN IS LISTED AS A PRIMARY QPL OR QML
THEREFORE THE QUALIFIED PRODUCTS LIST OR
QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
500 FT/SPOOL, LENGTHS PER SPEC
100 FT/MINIMUM LENGTHS
If Advice code is 2N, 28, or 34, this requirement is to provide material in continuous length. Multiple unit packs are unacceptable. Only continuous length will meet the requirement. If Advice code is 2P or 39, this requirement is to provide material in continuous length. Multiple unit packs are acceptable. Advice code (ADV) is located after the "For Government Use Only" heading under the Shipping Information. If there are inconsistencies between the schedule and Advice code, the Advice code takes precedence. **************************************************
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC NON GOVT STD SAE AS22759/43B REVISION NR B DTD 07/01/2023 PART PIECE NUMBER: M22759/43-20-9
TDP Rev B Gen 2
SPE7M1-26-T-281Q
SECTION B
IAW REFERENCE NON GOVT STD SAE AS22759E
REVISION NR E DTD 07/01/2024
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017776236 0001 FT 64,000.000
NSN/MATERIAL:6145011953394
DELIVERY (IN DAYS):0184
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 5% MINUS 5%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:500 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION AND PACKAGING SHALL BE IAW THE
LATEST REVISION OF MILITARY SPECIFICATION:
MIL-DTL-12000, FOR CABLE, CORD AND WIRE.
..
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
SPE7M1-26-T-281Q
SECTION B
PR: 7017776236 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:07/15/2026 Original Required Delivery Date:05/31/2027
SPE7M1-26-T-281Q NSN/Part Number: 6145-01-195-3394 Quantity: 64,000 FT Purchase Request: 7017776236QTY: 64000 Delivery: 184 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3461
This contract is for the procurement of 7075 alloy aluminum sheets, measuring 0.063 inches thick, 48 inches wide, and 144 inches long. The total quantity requested is 15 sheets across three separate delivery line items, shipping to DLA Distribution Depots in Hill AFB, Oklahoma, and Warner Robins. All materials must be supplied in whole feet lengths and conform exactly to the specified dimensions, as test coupons are not permitted. Compliance requires a Certificate of Quality Compliance with every shipment and adherence to the Qualified Suppliers List for Distributors (QSLD). Strict marking requirements are mandated, including the contract delivery order number, NSN, and manufacturer details, using waterproof stamping or stenciling. Packaging must follow MIL-STD-2073-1E and ASTM B660 standards, featuring robust four-corner and edge protection with fiberboard top and bottom coverage. Delivery is required within 15 days after receipt of order.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3463
This contract is for the procurement of 12 sheets of phosphoric acid anodized and primed 7075-T6 aluminum alloy metal sheet. Each sheet must measure 0.040 inches thick, 48 inches wide, and 144 inches long, with a reference weight of 27.924 lbs per sheet. The material must strictly adhere to the specified dimensions, as test coupons are not permitted, and lengths must be in whole feet. Compliance with SAE AMS4045M, ASTM B666/B666M-20, and ASTM B660-23 standards is required. Key requirements include the submission of a Certificate of Quality Compliance with every shipment and strict adherence to the Qualified Suppliers List for Distributors (QSLD). Each unit must feature comprehensive identification markings, including the contract delivery order number, NSN, specification number, alloy grade, manufacturer details, and dimensions. Packaging must follow MIL-STD-2073-1E and RP001 guidelines, ensuring robust corner and edge protection. Delivery is set for DLA Distribution Warner Robins with a required delivery date of February 7, 2027.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3460
This contract is for the procurement of aluminum alclad metal sheets, specifically Alloy 7075 T-6, with dimensions of 0.050 inches thick, 48 inches wide, and 144 inches long. The total quantity requested is 12 sheets across two line items, to be delivered FOB Origin to DLA Distribution centers in San Diego, California, and Oklahoma. Delivery is required within 18 days after the order is placed, with specific need ship dates in September and February of 2026 and 2027. Compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory for award eligibility. Suppliers must provide a Certificate of Quality Compliance with every shipment and adhere to strict marking and packaging requirements, including the use of waterproof markings and robust four-corner material protection. The procurement is governed by various technical standards, including SAE AMS4049N and ASTM B660/B666, and requires the removal of government identification from any non-accepted supplies.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
Federal
ROUND BAR
Solicitation # SPMYM226Q7975
Solicitation SPMYM226Q7975 is issued by the DLA Maritime Puget Sound for the procurement of round bars. This is a total small business set-aside under NAICS code 331491. Quotes must be submitted via email to Diana Baldwin by August 14, 2026, at 11 AM. The delivery terms are FOB Destination Silverdale, Washington. To be considered responsive, bidders must submit a signed and completed solicitation including contractor information, cage codes, lead times, and manufacturer details. Contractors required to implement NIST SP 800-171 must provide a current assessment not older than three years, though commercial off the shelf items are exempt provided they are identified during the bidding process.
DLA Maritime - Puget Sound

POSTED

1 day ago

DEADLINE

in about 23 hours
View Details
NAICS: 331491
New
DIBBS
Metal Bar Stock Manufacturing and Supply
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
DIBBS
Supply of Metal Bar (PN 7053887-3, NSN 9530-01-691-7904)This subcontract, issued by the Defense Logistics Agency under the Department of Defense, requires the manufacture, packaging, marking, and delivery of four units of a precision metal bar, identified as part number 7053887-3 and NSN 9530-01-691-7904. The project falls under NAICS code 331491 and mandates strict adherence to military specifications, including government inspection at the point of origin and full compliance with DLA standards for packaging and delivery. The solicitation was posted on August 11, 2026, with a response deadline set for August 24, 2026. Interested parties must ensure all deliverables meet the precise technical requirements and regulatory guidelines established by the agency to ensure successful fulfillment of the contract.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
DIBBS
Aluminum Alloy Metal Sheet Supply
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
DIBBS
Aluminum Alloy Plate Manufacturing and Supply
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
DIBBS
Supply of Aluminum Alclad Sheet per Military Specifications
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2088
This solicitation from the Defense Logistics Agency is for the procurement of four metal bars, identified by part number 7053887-2 and NSN 9530-01-691-9562. The contract requires delivery within five days after receipt of order and is categorized under NAICS code 331491. The agreement is subject to strict technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. It mandates compliance with Cybersecurity Maturity Model Certification Level 2 and Covered Defense Information protocols. Additionally, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the data.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3417
This contract is for the procurement of titanium alloy metal sheets measuring 0.045 inches thick, 36 inches wide, and 96 inches long. The order consists of two sheets under NSN 9535013607628, with a delivery timeframe of 160 days. The material must be supplied in whole feet lengths and comply with specific technical standards, including SAE AMS4911T, ASTM A700-14, and SAE AMS2809B. A critical requirement of this procurement is that only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award. The contractor must provide a Certificate of Quality Compliance with every shipment and adhere to strict marking requirements, including the DLA contract delivery order number, NSN, and manufacturer details. Markings must be legible, waterproof, and applied via stamping or stenciling, though adhesive labels are permitted for specific small-diameter items. Delivery is set for the DLA Distribution San Joaquin facility in Tracy, California.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3428
Solicitation SPE8E9-26-T-3428 is a procurement for 30 sheets of aluminum Alclad cladding, specified as 0.040 inches thick, 36 inches wide, and 144 inches long, with a cladding thickness of 0.0020 inches on both sides. The material must adhere to strict technical standards, including SAE AMS4461C, SAE AMS-QQ-A-250/5C, ASTM B660-23, and ASTM B666/B666M-20. A critical requirement for award is that suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. Deliverables must be shipped FOB Destination to the DLA Distribution Depot Oklahoma at Tinker AFB by July 1, 2026, with a required delivery window of 48 days after receipt of order. The contract mandates rigorous quality and marking protocols. A Certificate of Quality Compliance (Mill-Material Certification) is required for every shipment, and no sheets will be accepted unless they conform to the exact dimensions specified, as test coupons are prohibited. Packaging must comply with MIL-STD-2073-1E and ASTM B660 Level A, featuring robust four-corner and edge protection. Continuous identification markings, including the DLA contract number, NSN, and manufacturer details, must be applied via stamping or stenciling and be legible to the unaided eye. Invoicing must be processed electronically through Wide Area WorkFlow (WAWF), and the government retains responsibility for inspection and acceptance at the destination.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

2 days ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334418
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M1-26-Q-0903
This solicitation is for the procurement of five circuit card assemblies under solicitation number SPE7M1-26-Q-0903 for the Department of Defense Maritime Supply Chain. The items must be delivered within 350 days after order and are designated as restricted source items requiring engineering source approval by the government design control activity. Surplus materials are strictly prohibited, and all supplies must adhere to NAVAIR Aircraft Launch and Recovery Equipment traceability requirements. Bare items must be marked with the contract number, NAWC CAGE, and part number, though technical data drawings take precedence in the event of a conflict. The contract incorporates several DLA technical and quality requirements, including specific packaging standards and configuration change management. Additionally, the technical data is subject to strict export controls under ITAR or EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed mandatory export-control training.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-280Z
This contract is a solicitation issued by the Department of Defense Maritime Supply Chain for the procurement of one fluid filter element under NSN 4330-00-416-7309. The requirement specifies several acceptable manufacturers and part numbers, including options from Facet LLC, Kaydon Custom Filtration Corporation, Deluxe Products Div Walker Mfg Co, Wix Corp, Baldwin Filters Inc, and Hatch and Kirk Inc. The delivery is required within 20 days after order, with a required delivery date of August 11, 2026, and shipping is designated as FOB Origin. The order must adhere to strict technical and quality requirements as outlined in the DLA Master List, specifically regarding packaging and palletization under RP001 and ASTM D3951 standards. All packaging must be marked and labeled according to MIL-STD-129 and shipped via traceable means to the designated address in Egg Harbor Township, New Jersey. Inspection and acceptance will take place at the destination.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-281F
This contract is a solicitation for the procurement of one magnetic contactor, identified by NSN 6110-01-456-7570 and part number A275KXX91-120. The item is designated as a critical application item and is associated with Nu-Torque Inc and Curtiss-Wright Flow Control Corporation. Delivery is required within 20 days after receipt of order, with the final destination being the USS George Washington CVN 73. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-tolerance policy for non-conformances in sample lots. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA.
Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-281M
This contract is for the procurement of electrical wire under solicitation SPE7M1-26-T-281M for the Department of Defense. The requirement consists of two line items totaling 36,999.9 feet of wire identified by NSN 6145009176378, with a quantity variance allowed of plus or minus 5 percent. The material is designated as a critical application item and must comply with SAE AS22759/5A and SAE AS22759E standards. Delivery is required within 130 days, with shipments destined for DLA Distribution facilities in Tracy, California, and New Cumberland, Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, specifically MIL-STD-2073-1E, MIL-STD-129 for marking, and MIL-DTL-12000 for cable and wire preservation. Depending on the assigned advice code, the material must be provided in continuous lengths, as multiple unit packs may be unacceptable. The item is listed on a Qualified Products List or Qualified Manufacturers List, meaning only approved sources are eligible. Terms include FOB Origin shipping and destination-based inspection and acceptance.
Other Aluminum Rolling, Drawing, and Extruding

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331318
New
DIBBS
MAGNET WIRE
Solicitation # SPE7M1-26-T-281N
This contract, identified as SPE7M1-26-T-281N, is a solicitation for the procurement of 13 reels of number 15 AWG electrical magnet wire, part number MW016CHX000015UNC. Each reel contains 75 pounds of material and must be provided in a continuous length. The requirement is designated as a critical application item and must adhere to NEMA MW1000 standards. Delivery is required within 145 days, with a need ship date of January 17, 2027, and a final delivery destination of DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E and MIL-DTL-12000 for cable and wire preservation. It incorporates specific technical and quality requirements via the DLA Master List and prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. The procurement is conducted under full and open competition and requires marking in accordance with MIL-STD-129.
Other Aluminum Rolling, Drawing, and Extruding

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M1-26-T-281Z
This contract is for the procurement of 221 units of a self-sealing quick disconnect coupling half, identified by NSN 4730009034451. The item is an anodized aluminum bulkhead designed for 3000 PSI operating pressure, featuring a male quick disconnect end and a threaded male fitting end per MS33515-4. This is designated as a critical application item for aircraft use and is a restricted source item requiring engineering source approval from the government design control activity. Approved part numbers include those from Triumph Aerostructures, Eaton Aeroquip, and National Machine Company. The solicitation, numbered SPE7M1-26-T-281Z, is a HUBZone set-aside issued by the Department of Defense Maritime Supply Chain. Delivery is required within 139 days, with a final need ship date of January 11, 2027, and shipping destined for DLA Distribution Cherry Point in North Carolina. The contract mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 standards. Technical and quality requirements are governed by the DLA Master List, with specific provisions for configuration change management and the removal of government identification from non-accepted supplies.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR, F
Solicitation # SPE7M1-26-T-281P
This contract, identified as SPE7M1-26-T-281P, is a solicitation from the Department of Defense Maritime Supply Chain for the procurement of five F-type connector adapters. The items are identified by NSN 6060015691025 and part number PE9444 from Infinite Electronics International. Delivery is required within 15 days after the order, with a required delivery date of September 9, 2026. The shipment is destined for the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with FOB Origin terms. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements and technical quality standards. Inspection and acceptance will occur at the destination.
Electronic Connector Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
DIBBS
PUMP, RECIPROCATING
Solicitation # SPE7M1-26-Q-1367
This contract, identified as SPE7M1-26-Q-1367, is a firm fixed price procurement for six reciprocating pumps, part number 4320-01-272-3909. The delivery is required within 30 days after receipt of the order, with a need date of October 8, 2026. Inspection and acceptance will take place at the destination, and the items are to be shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including DLA packaging standards RP001 and the removal of government identification from non-accepted supplies per RQ011. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except in specific functional components authorized by NAVSEA. Packaging and preservation must comply with MIL-STD-2073-1E, MIL-STD-129, and Federal Specification MIL-P-16789.
Fluid Power Pump and Motor Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334515
New
DIBBS
METER, SPECIAL SCALE
Solicitation # SPE7M1-26-T-281U
This solicitation, issued by the Department of Defense Maritime Supply Chain, is for the procurement of 17 special scale meters under NSN 6625-00-422-1421. The contract requires delivery within 161 days after the order is placed and specifies performance in Tracy, California. The procurement is governed by NAICS code 334514 and includes strict adherence to DLA packaging requirements, the protection of covered defense information, and the removal of government identification from non-accepted supplies. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with specific exceptions for functional mercury used in batteries, sensors, or weapon systems as specified by NAVSEA. Additionally, any portable instruments containing mercury must be shock-proof and feature a second boundary of containment. Offerors providing alternate parts must submit a complete data package for both the approved and alternate components.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M1-26-T-281J
This contract is for the procurement of two circuit card assemblies, identified by NSN 5998013467999 and Lockheed Martin part number 16E4014-3. The order is managed under solicitation SPE7M1-26-T-281J with a required delivery date of April 20, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination. The agreement mandates strict adherence to technical and quality requirements, including Item Unique Identification and MIL-STD-130 standards. Due to the sensitive nature of the electronics, the supplier must utilize DOD qualified electrostatic discharge and electromagnetic interference protective packaging in accordance with MIL-PRF-81705 and MIL-STD-129. All shipments must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania.
Bare Printed Circuit Board Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M1-26-T-282B
This solicitation is for the procurement of 32 units of Quick Half Couplings (NSN 4730-01-292-2165) for the Maritime Supply Chain under the Department of Defense. The delivery requirement is 56 days after the order is placed. Offerors are encouraged to provide quantity ranges in their quotes to allow for flexibility in requirements and are advised to submit a No Bid quote if they intend to bid after the closing date to keep the buyer informed. Compliance requirements include adhering to domestic material restrictions such as the Berry Amendment and the Buy American Act, and certifying that no covered telecommunications equipment or services will be provided. Additionally, contractors must register via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized, and small business joint ventures must provide specific representations and certifications.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-281V
This contract, identified as SPE7M1-26-T-281V, is a solicitation from the Department of Defense Maritime Supply Chain for the procurement of 13 fluid filter elements. The required items are specified as NSN 4330-01-706-0954, corresponding to Eaton Filtration LLC part number 01.NL.250.10API.30.E.P. This is designated as a critical application item with a required delivery date of October 9, 2026, and a delivery window of 45 days. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E and MIL-STD-129 for marking. Shipping is FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals in the manufacturing or delivery of the items, requiring approved substitutes if necessary.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details