Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Cold-Finished Steel Bar Supply (Grade 1018/1020, 6" Diameter)

Active

Federal

Response Deadline07/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of 115,000 linear feet of cold-finished round steel bar with a 6-inch diameter, manufactured to meet stringent industry standards including ASTM A108, A29/A29M-20, A700-14, and SAE AMS2806, ensuring material consistency, mechanical properties, and surface finish suitable for precision applications. The steel grade is specified as 1018/1020, commonly used for machined components requiring good machinability and moderate strength, and each shipment must be accompanied by a Certificate of Quality Compliance to verify adherence to all technical requirements. The contract is classified as a subcontract under NAICS code 331210, which pertains to steel pipe and tube manufacturing from purchased steel, and is issued by the DLA Dist San Joaquin under the Department of Defense. The performance location is in Tracy, California, with a ZIP code of 95304-5000, and the solicitation was posted on July 16, 2026, with bids due by July 24, 2026. All deliveries must align with the specified material specifications and quality documentation standards, with no set-aside provisions indicated, meaning eligible suppliers of any size may respond.

General Info

Supply 115,000 linear feet of 6-inch diameter 1018/1020 cold-finished steel bar to Tracy, CA, per ASTM and SAE standards.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased SteelView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 24

Submission deadline

Response Deadline

07/24/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA DIST SAN JOAQUIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 115,000 linear feet of cold-finished round steel bar, 6 inches in diameter, meeting ASTM A108, A29/A29M-20, A700-14, and SAE AMS2806 standards, with Certificate of Quality Compliance provided per shipment.

Similar Contracts

Same NAICS industry code

TUBE, FUEL DRAINThis contract specifies the procurement of a fuel drain tube, identified by part number L21609G01 and NSN 4710-00-613-7270, with a quantity of three units to be delivered FOB origin within 169 days, with no acceptable variance in quantity. The item is classified as a commercial item and designated as a critical application item, subject to strict compliance with military and defense standards including MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special markings required. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking, except for specific functional uses approved by NAVSEA, with portable mercury-containing devices requiring dual containment and shockproof design. All packaging and palletization must conform to DLA Packaging Requirements and IP056 restrictions, and the delivery destination is specified as the DLA Distribution San Joaquin warehouse in Tracy, California. The contract was issued under solicitation SPE4A5-26-T-282T with a response deadline in July 2026, and the required delivery date is October 5, 2027, with a need ship date of January 3, 2027. The purchase request number is 7017409179, and primary point of contact is Donetta Nelson of the Department of Defense.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

TUBE, METALLICThe contract specifies the procurement of seamless metallic tubes made from aluminum alloy 6061 in temper T6, with dimensions of 1-1/2 inches square by 1/4 inch wall thickness and a standard length of 21 feet per unit, conforming to the ASTM B221-21 standard for extruded aluminum products. The tubes must meet strict quality and packaging requirements outlined in DLA’s Master List of Technical and Quality Requirements, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. The use of ozone-depleting chemicals is strictly prohibited, and any alternative substances must be pre-approved unless explicitly permitted by the specification. Each unit is designated as a linear foot equivalent (LG), with a total quantity of 91.905 LG, rounded to 92 units, and no variance in quantity is permitted. Delivery is required FOB origin, with inspection and acceptance occurring at the destination, and the delivery deadline is set for 221 days from contract award, with a required ship date of February 24, 2027. Packaging must also adhere to ASTM B660 and DLA’s packaging requirements, with palletization and container specifications detailed per DLA guidelines. The item is identified by NSN 4710-01-182-2428, and the delivery address is DLA Distribution Red River in Texarkana, Texas. Full and open competition applies, with contract administration handled by the Department of Defense’s Fluid Handling Division under solicitation SPE7M4-26-T-234E, and primary point of contact is Rory O’Reilly.

FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

North Fork French Creek Pipe Arch Materials

Csa Intermountain 4 Usda-Fs

POSTED

about 21 hours ago

DEADLINE

Precision Steel Bar Manufacturing (Carbon & Alloy)The contract entails the manufacturing of precision carbon and alloy steel bars meeting SAE-AISI .28–.50C and ASTM A311/A311M specifications, requiring strict adherence to dimensional tolerances, mechanical properties, and material composition standards. Full traceability of material origin, processing steps, and final inspection results is mandatory, ensuring complete documentation from raw input to finished product. Compliance with U.S. defense article controls is a fundamental requirement, meaning all production, handling, and shipping must align with applicable ITAR and EAR regulations to safeguard sensitive defense-related materials and technologies. Production is to be performed at the designated place of performance in Texarkana, with a response deadline of July 27, 2026, and the solicitation posted on July 16, 2026. This is a subcontract under the NAICS code 331210 for Iron and Steel Mills and Ferroalloy Manufacturing, sponsored by the Department of Defense through the Land Supply Chain organization. The work is subject to defense procurement protocols, including quality assurance, security clearances, and reporting obligations necessary for supporting critical military systems. Bidders must demonstrate proven capability in high-integrity steel bar production and possess the infrastructure to maintain complete material traceability throughout the manufacturing lifecycle.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Metal Steel Bar Supply – UNS K23080 Round BarThe contract calls for the supply of round steel bars made from UNS K23080 material, with a diameter of 3.000 inches and lengths ranging between 10 and 12 feet, fully compliant with applicable military and ASTM standards. All materials must be properly preserved, packaged, and marked according to government specifications to ensure integrity during transport and storage. Delivery is required to the DLA New Cumberland facility, with the place of performance identified as New Cumberland, Pennsylvania, ZIP code 17070-5002. The solicitation is classified as a subcontract under NAICS code 331210, which pertains to steel product manufacturing. The opportunity was posted on July 16, 2026, and responses are due by July 24, 2026, with all submissions handled through the DIBBS platform. There is no set-aside designation specified, and the contracting activity falls under the Department of Defense, specifically the DDSP New Cumberland Facility.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Precision Metal Bar Supply – Steel 4130 Cold Drawn Square BarsThe contract calls for the supply of precision alloy steel 4130 bars in cold drawn and normalized condition, with a square cross-section measuring exactly 1.000 inch on each side and lengths ranging from 10 to 12 feet. The material must fully comply with established military and industry standards governing metallurgical properties, dimensional tolerances, and surface finish to ensure suitability for high-performance applications. The bars are intended for use in critical components requiring consistent mechanical behavior and structural integrity under demanding operational conditions. The solicitation is issued as a subcontract under NAICS code 331210, tied to the Department of Defense activity at Cherry Point, North Carolina, with the specified place of performance listed as 28533-5040. The opportunity was posted on July 16, 2026, and responses must be submitted no later than July 24, 2026. Although no solicitation number is provided, the contract reference is accessible via the DIBBS portal, indicating it is part of a formal defense procurement pathway governed by federal supply protocols and quality assurance requirements.

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

Cold-Drawn Steel Hex Bar SupplyThe contract calls for the supply of cold-drawn, annealed E4340 alloy steel hex bars measuring 0.750 inches across flats and ranging in length from 10 to 12 feet, with all material required to meet recognized military or industrial specifications. The product must conform to stringent quality and mechanical property standards appropriate for high-strength aerospace or defense applications, ensuring consistency in composition, surface finish, and dimensional accuracy. The delivery location is Tracy, California, with a zip code of 95304-5000, and the material is intended for use under a subcontract arrangement within the Department of Defense supply chain. The solicitation was posted on July 16, 2026, with a firm response deadline of July 24, 2026, and is managed by DLA Dist San Joaquin under NAICS code 331210, which classifies the industry as forged and stamped metal product manufacturing. The terms imply strict compliance with technical documentation, certification of material test reports, and adherence to specified delivery schedules, as the contract supports critical defense or military equipment production. Although no specific set-aside designation is indicated, the procurement is handled by a federal agency with established protocols for defense-grade material sourcing and supplier vetting.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Raw Material Supply – Steel Tubing to MIL-T-3520 Type 3

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Corrosion-Resistant Steel Plate (Aircraft Quality)The contract requires the supply of 6,000 pounds of corrosion-resistant, aircraft-quality steel plate designated as COMP 4340, which must be hot-rolled and annealed to meet exacting dimensional standards and full material traceability. The material must conform to military specifications for both composition and marking, ensuring suitability for high-performance aerospace applications where reliability and durability are critical. All delivered material must be properly documented and labeled in accordance with defense-grade requirements to guarantee authenticity and compliance throughout the supply chain. This is a subcontract issued by the Department of Defense through the Depot Oklahoma office, with a solicitation posted on July 16, 2026, and responses due by July 20, 2026. The NAICS code 331210 indicates this pertains to the rolling of steel and other metal products. The place of performance and point of contact details are not specified, but the procurement is managed through the DLA DIBBS platform, suggesting it is part of a broader defense logistics effort. Bidders must ensure their proposals meet all technical, marking, and traceability criteria to be considered eligible for award.

POSTED

DEADLINE

Supply of Metallic Tubing for Defense ApplicationThe contract seeks the manufacture and delivery of 74 units of metallic tubing specifically designed for defense applications, with all units required to meet FAA airworthiness compliance standards to ensure safety and reliability in aerospace environments. Each component must be packaged according to stringent military packaging specifications to protect against damage during transit and storage, and full supply chain traceability is mandated to verify the origin of raw materials, manufacturing processes, and quality control measures throughout the lifecycle of the product. The tubing is intended for critical defense systems, necessitating rigorous documentation and adherence to defense-grade quality assurance protocols. The solicitation is classified as a subcontract under NAICS code 331210, which corresponds to aluminum rolled metal product manufacturing, and is issued by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense. Responses must be submitted by July 30, 2026, with the opportunity posted on July 16, 2026. The place of performance and specific delivery location are not detailed in the available information, but performance expectations are tied to defense-specific requirements, including compliance with federal and military regulations. Bidders must be prepared to demonstrate capability in producing high-integrity metallic components under traceable, auditable conditions suitable for military aerospace use.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Precision Metal Bar Supplier (Chrome-Molybdenum 4130 Steel)The contract requires the supply of 131 feet of AISI 4130 chrome-molybdenum steel round bar, precisely cut to specified lengths, with full material traceability and strict adherence to military standards. The material must meet exacting quality and performance specifications to ensure reliability in critical applications, and all production and inspection records must be maintained to support traceability throughout the supply chain. Compliance with relevant military specifications is mandatory, and the supplier is expected to deliver material that is certified and verified against required mechanical and chemical properties. This is a subcontract under solicitation SPE8E926Q0574, issued by the Department of Defense through the Construction & Equipment MRO SVC I agency, with a response deadline of July 23, 2026. The NAICS code 331210 indicates this falls under the forgings and stampings manufacturing sector, aligning with the nature of precision metal bar production. All deliveries must be made to the specified place of performance under the terms outlined in the solicitation, and bidders are expected to demonstrate the capability to consistently meet military-grade quality controls, documentation requirements, and on-time delivery commitments.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

TUBE, METALLICThe contract specifies the procurement of 27.54 continuous lengths of metallic tube, each 50 feet long, totaling 28 units, with the NSN 4710011374340 and part number 3P669 from W.W. Grainger, Inc. The material is copper and must adhere to all applicable DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards such as ASTM D3951 for packaging. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 packaging requirements. Delivery is FOB origin with a required delivery date of October 14, 2026, and a need ship date of December 21, 2026, under a 146-day acceptance window. Quantity variance is strictly zero percent, and inspection and acceptance occur at the destination. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Note C19 for general transport and C20 for first destination logistics. The solicitation number is SPE7M4-26-T-266R, issued by the Department of Defense’s Fluid Handling Division, with primary contact Rory O’Reilly available for inquiries. Units are defined by the DoD standard and mapped to ANSI X12 through official DLA documentation.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

STEM, FLUID VALVEThe contract pertains to the procurement of nine STEM fluid valves, identified by NSN 4820-01-577-7724, under solicitation SPE7MC-26-T-119V, with a delivery requirement of 31 days after award. Full and open competition applies, and the item is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which governs specifications unless superseded by this contract. Ozone-depleting chemicals are strictly prohibited in the manufacture or delivery of the valves, and any substitution requires prior approval unless explicitly authorized by the underlying specifications. The valves are classified as defense-related technical data subject to ITAR or EAR export controls, meaning unauthorized disclosure or export—whether to foreign nationals in the U.S. or abroad—is prohibited, and compliance with DFARS 252.225-7048 is mandatory. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal DLA authorization may access the controlled technical data. The contractor must meet Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements, either through a self-assessment or a certified third-party assessment. Inspection and acceptance of the valves must occur at the manufacturer’s origin, and tailored higher-level quality requirements apply regardless of whether the supplier is a manufacturer or a non-manufacturer. Removal of government identification from non-accepted items is prohibited, and all packaging must comply with DLA packaging requirements. The solicitation was posted on July 17, 2026, with responses due by July 22, 2026, and the place of performance is Tracy, California, 95304-5000. The contracting officer, Paula McClary, can be contacted at fmda3302@dla.mil or 614-692-0417 for inquiries. This procurement falls under NAICS code 332912 and is managed by the DLA San Joaquin office under the Department of Defense.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

IMPELLER, FAN, AXIAL

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 16 hours ago

DEADLINE

IMPELLER, FAN, AXIAL

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 16 hours ago

DEADLINE

DECK BOX OPERATOR, VThe contract is for the procurement of 45 Deck Box Operators, Part Number 12165-401, identified by NSN 4820-01-656-8116, under solicitation SPE7MC-26-T-119T, issued by the Defense Logistics Agency Dist San Joaquin. The contract is a total small business set-aside under NAICS code 332911 with a required delivery date of 121 days after award, to be shipped FOB origin. The unit price is $45.00 per unit, resulting in a total contract value of $2,025.00, with no variance permitted in quantity. All items must be packaged and preserved in strict compliance with MIL-STD-2073-1E, including specification 31 dry preservation, and marked in accordance with MIL-STD-129 without any special marking codes. Packaging and palletization must follow DLA’s standard requirements, and no mercury or mercury compounds are allowed in any preservation, packaging, or marking materials. The delivery destination is the receiving warehouse at 25600 S Chrisman Road, Tracy CA 95304-5000, and inspection and acceptance occur at the destination point. The contract incorporates all applicable technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The supplier must comply with DLA packaging standards and transportation guidelines C19 and C20. The purchasing request number is 7002774572, and the required ship date is October 31, 2023, though the original delivery deadline was November 7, 2023. Contract performance is overseen by Jason Endress, whose contact information is provided. The solicitation was posted on July 17, 2026, with a response deadline of July 22, 2026, and the item must be delivered to the designated DLA warehouse as specified, adhering to all federal packaging, marking, and transportation protocols.

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

VALVE, SAFETY RELIEFThe contract specifies the procurement of five safety relief valves with NSN 4820-01-487-4618 under solicitation SPE7MC-26-T-119X, a total small business set-aside with NAICS code 332911. Delivery is required within 75 days to the DLA Dist San Joaquin receiving warehouse in Tracy, California, with FOB origin terms and no quantity variance permitted. The valves must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, container types, and marking per MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging guidelines, and mercury or mercury-containing compounds are strictly prohibited from direct contact with the hardware except for permitted applications like functional batteries, fluorescent lamps, or weapons systems, which must include secondary containment as specified by NAVSEA. The item is designated as a critical application item, supplied by Anderson Greenwood LP DBA Anderson or Emerson Automation Solutions under part number SW122D03E0401, CDS17053. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision determined by the solicitation or award date based on acquisition size. Casting or forging may be necessary for manufacturing, and if government tooling is lacking, vendors must submit a Casting and Forging Assistance Request through designated DLA channels. The unit of issue is each, with a total contract value of $5.00 per unit. The need ship date is February 3, 2026, and the original required delivery date is February 10, 2026. Transportation and freight details follow DLAD Proc Notes C19 and C20, and all documentation must align with DLA’s authorized unit of issue standards. Primary point of contact for the contract is Paula McClary, reachable via email and phone provided under the DLA Dist San Joaquin office.

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Handling and DocumentationThe contract pertains to the management of hazardous materials within components or packaging, requiring strict adherence to safety and regulatory protocols. Contractors are responsible for preparing Safety Data Sheets (SDS) in compliance with international and federal standards and must provide advance notification to the Defense Logistics Agency (DLA) prior to delivery or handling of any hazardous substances. This obligation ensures proper documentation, risk assessment, and preparedness across the supply chain. The place of performance is designated as Tracy, California, with the contract falling under NAICS code 561910 for other support activities for material handling. This is a subcontract opportunity issued by the DLA District San Joaquin, under the Department of Defense, with a response deadline of July 27, 2026. The solicitation was posted on July 16, 2026, and contractors must be prepared to meet all hazardous materials handling requirements as defined by applicable regulations. While no specific set-aside designation is applied, bidders must demonstrate capability in managing hazardous substances, maintaining accurate SDS documentation, and coordinating timely notifications to DLA. Failure to comply with these requirements may result in non-performance or contract termination.

Packaging and Labeling Services

POSTED

DEADLINE

Mercury Containment Certification and TestingThe contract seeks laboratory testing and certification to verify the absence of mercury or adherence to NAVSEA 5100-003D shock-proof containment standards, ensuring that materials or components meet stringent naval safety and environmental requirements. The work is classified under NAICS code 541620, indicating it involves scientific and technical testing services, and is issued as a subcontract under the Department of Defense through DLA Dist San Joaquin. Performance is required at a location in Tracy, California, with a zip code of 95304-5000, and the solicitation was posted on July 16, 2026, with responses due by July 27, 2026. Submission must provide documented evidence of testing protocols and certification results that conclusively demonstrate compliance with the specified naval standards. The absence of mercury or successful validation of shock-proof containment will be critical to meeting contractual obligations, with outcomes directly impacting the suitability of equipment for defense applications. Although no point of contact is listed, the online solicitation link provides access to detailed submission guidelines and necessary documentation requirements for interested parties to respond prior to the deadline.

Environmental Consulting Services

POSTED

DEADLINE

MIL-STD-129 Compliant Marking and LabelingThis contract requires the application of permanent labels and 2D Data Matrix barcodes in full compliance with MIL-STD-129 standards, ensuring accurate identification of items through the inclusion of National Stock Numbers, Contract Line Item Numbers, and detailed contract information. The labeling must be durable and legible for use in military logistics environments, supporting inventory tracking and supply chain operations. The work is part of a subcontract solicitation issued by the Defense Logistics Agency San Joaquin, with performance required at Tracy, California, 95304-5000. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026, under NAICS code 541990 for other professional, scientific, and technical services. All submissions must meet the technical specifications mandated by MIL-STD-129 to ensure compatibility with DoD logistics systems.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

MIL-STD-2073-1E Compliant Packaging ServicesThe contract requires compliant clean and dry preservation and packaging of an observation window according to MIL-STD-2073-1E, Code 10, using only approved materials and methods to ensure long-term protection and readiness. All work must adherence strictly to the military standard’s specifications for environmental protection, material selection, and packaging techniques to maintain the integrity of the component under storage and transport conditions. The scope is focused exclusively on the preservation and packaging phase, with no indication of manufacturing or modification services included. This is a subcontract opportunity issued by DLA DIST SAN JOAQUIN under the Department of Defense, with a place of performance located in Tracy, California, 95304-5000. The solicitation is open for responses until July 27, 2026, and was posted on July 16, 2026. The NAICS code 493190 indicates classification under Other Warehousing and Storage, suggesting the work involves logistics and preservation services rather than production. The contract is not set aside for any specific small business category and is accessible through the DIBBS platform with the referenced solicitation number.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Manufacturing of Observation Window (NSN 9340005714721)The contract calls for the precision manufacture of a military-spec observation window designated by NSN 9340005714721, demanding rigorous fabrication standards to ensure optical clarity, durability, and compliance with federal and defense specifications. The product must meet exacting performance criteria suitable for critical military applications, requiring advanced materials and processes to guarantee structural integrity and visual fidelity under extreme environmental conditions. All work must adhere to applicable defense quality and testing protocols to ensure mission readiness and operational reliability. Bids are solicited as a subcontract under NAICS code 332322, with a response deadline of July 27, 2026, and performance expected to be completed at the facility in Tracy, California, ZIP 95304-5000. The solicitation is managed by DLA Dist San Joaquin under the Department of Defense, with no set-aside provisions specified. Interested parties must prepare technical and compliance documentation aligned with military requirements and submit proposals through the provided DIBBS portal before the deadline to be considered for award.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Hazardous Material Compliance and Safety Data ManagementThe contract titled Hazardous Material Compliance and Safety Data Management requires the successful bidder to ensure full compliance with hazard communication standards by authoring and maintaining accurate Safety Data Sheets for all items containing hazardous components. This includes aligning documentation and reporting procedures with DFARS 252.223-7001 to meet federal defense procurement requirements for hazardous materials. The work is centered on supporting defense logistics through precise, up-to-date safety documentation that facilitates safe handling, storage, and transportation of regulated substances across the supply chain. This subcontract is issued by the DLA Dist San Joaquin under the Department of Defense with a NAICS code of 541690 and is performance-based at Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026. While no setaside designation is specified, bidders must be prepared to demonstrate expertise in hazardous material regulatory compliance and data management within the defense contracting environment. The contract underscores the critical need for precision in SDS creation and adherence to federal regulations governing the handling and communication of chemical hazards in military operations.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Military-Compliant Packaging, Labeling, and Marking ServicesThe contract requires compliance with MIL-STD standards for the packaging, preservation, barcoding, and hazard labeling of water dispensers and their components, with all shipments designated FOB origin. This includes ensuring that all materials are securely packed, properly preserved against environmental degradation, accurately marked with standardized barcodes, and clearly labeled with appropriate hazard warnings as mandated by military specifications. The work must be performed to meet stringent defense logistics requirements, ensuring readiness and traceability throughout the supply chain. The opportunity is classified as a subcontract under NAICS code 561910, issued by the DLA Dist San Joaquin under the Department of Defense. The place of performance is in Tracy, California, with a ZIP code of 95304-5000. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026. Contractors must be prepared to meet exacting federal defense standards without deviation, as non-compliance could result in rejection of shipments and contractual penalties.

Packaging and Labeling Services

POSTED

DEADLINE