Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on December 20, 2019. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Cold Work Tools

Awarded
N6833520Q0124Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332216
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M0-27-T-0877
Solicitation SPE7M0-27-T-0877 is a federal procurement issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the supply of electrical wire, specifically NSN 6145-01-687-0388. The requirement consists of two line items totaling 220 feet of wire, with a quantity variance allowed of plus 10 percent and minus 0 percent. The material must be provided in continuous lengths, and the contractor must adhere to the NEMA HP3 revision dated January 1, 2021. Delivery is required within five days after the order, with a final required delivery date of November 2, 2026, to the Letterkenny Army Depot in Chambersburg, Pennsylvania. The shipping terms are FOB Origin under the First Destination Transportation program, and items must be shipped via the fastest traceable means. The contract mandates strict adherence to military specifications for preservation, packaging, and marking, including MIL-DTL-12000 for cable and wire, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Palletization must comply with RP001 DLA Packaging Requirements. Inspection and acceptance will occur at the destination. Key regulatory requirements include the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 9, 2026, and must be submitted via the DLA Internet Bid Board System.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days
NAICS: 332216
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M0-27-T-0880
Solicitation SPE7M0-27-T-0880, issued by the Defense Logistics Agency (DLA) Weapons Support Maritime Supply Chain, is for the procurement of electrical wire under NSN 6145-01-721-6438. The requirement consists of four line items, each for a quantity of 500 units, totaling 2,000 units. The items must conform to the technical specifications of SAE AS22759/187 Revision C and are subject to Qualified Products List (QPL) or Qualified Manufacturers List (QML) applicability. Delivery is required within five days of order, with an original required delivery date of August 24, 2026. Shipping is FOB Origin, with inspection and acceptance occurring at the destination in Albany, Georgia. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-DTL-12000 for cable and wire preservation, MIL-STD-129 for marking, and RP001 for palletization. Environmental and safety restrictions are in place, prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury. Administratively, the contract utilizes the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. Key regulatory compliance includes the Buy American Act, DFARS cybersecurity reporting requirements, and NIST SP 800-171 assessment standards. Quotations must be submitted via the DIBBS portal by November 9, 2026.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days
NAICS: 332216
New
DIBBS
INSERTER, BEARING AND B
Solicitation # SPE4A6-27-T-7583
Solicitation SPE4A6-27-T-7583 is a request for quotations from the DLA Weapons Support ASC Commodities Division for the procurement of 18 units of an Inserter, Bearing and Bushing (Installing Tool, Ball Bearing), identified by NSN 5120-01-1115-3110. This item is designated as a critical application item and must be manufactured in accordance with several technical data packages, including basic drawing 19207 12292594 Revision F and reference drawings 19200 12579607 and 19200 13027484. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003, with acceptance based on zero non-conformances in the sample lot. Delivery is required within 150 days after order, with a need ship date of April 6, 2027, and a final required delivery date of May 8, 2027. Shipping is FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and specific DLA packaging requirements (RP001). The contract incorporates several regulatory clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 DOD assessment requirements, and various cybersecurity and hazardous material labeling standards. Quotations must be submitted via the DIBBS portal by November 6, 2026, and payment will be processed through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

General Info

Contract Value

$52,635.74

NAICS

332216 - Saw Blade and Handtool Manufacturing

Place of Performance

NJ

Set-Aside

SBA

Award Issued Date

Documents

1
XLSX

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division
Contacts1 person available
OfficeJOINT BASE MDL, NJ, 08733, USA
Office AddressJOINT BASE MDL, NJ, 08733, USA

Full Description

Show more
The Naval Air Warfare Center Aircraft Division in Lakehurst, NJ has a potential requirement for the items of support equipment listed in attachment #1 to this solicitation. It is anticipated that this effort will be placed as a Firm Fixed Price Purchase Order. In accordance with FAR Part 12 and FAR Subpart 19.5 this effort is reserved exclusively for small business concerns. 2. Government inspection and acceptance shall be performed at the VENDOR FACILITY by DCMA. 3. The following provisions and clauses apply to this procurement: 52.204-18 Commercial and Government Entity Code Maintenance JUL 2016 52.204-21 Basic Safeguarding of Covered Contractor Information Systems JUN 2016 52.209-7 Information Regarding Responsibility Matters OCT 2018 52.209-12 Certification Regarding Tax Matters FEB 2016 52.211-6 Brand Name or Equal AUG 1999 52.211-7 Alternatives to Government-Unique Standards NOV 1999 52.211-14 Notice Of Priority Rating For National Defense, Emergency Preparedness, and Energy Program Use APR 2008 52.212-1 (Dev) Instructions to Offerors - Commercial Items. (DEVIATION 2018-O0018) OCT 2018 52.212-2 Evaluation - Commercial Items OCT 2014 52.212-3 Alt I Offeror Representations and Certifications--Commercial Items (OCT 2018) Alternate I OCT 2014 52.212-4 Contract Terms and Conditions--Commercial Items OCT 2018 52.214-35 Submission Of Offers In U.S. Currency APR 1991 52.225-18 Place of Manufacture AUG 2018 52.232-40 Providing Accelerated Payments to Small Business Subcontractors DEC 2013 52.252-1 Solicitation Provisions Incorporated By Reference FEB 1998 52.252-3 Alterations in Solicitation APR 1984 52.252-5 Authorized Deviations In Provisions APR 1984 252.203-7000 Requirements Relating to Compensation of Former DoD Officials SEP 2011 252.203-7005 Representation Relating to Compensation of Former DoD Officials NOV 2011 252.204-7007 Alternate A, Annual Representations and Certifications JUN 2019 252.204-7008 Compliance With Safeguarding Covered Defense Information Controls OCT 2016 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting OCT 2016 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support MAY 2016 252.211-7003 Item Unique Identification and Valuation MAR 2016 252.211-7004 Alternate Preservation, Packaging, and Packing DEC 1991 252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations SEP 2019 252.215-7007 Notice of Intent to Resolicit JUN 2012 252.223-7008 Prohibition of Hexavalent Chromium JUN 2013 252.225-7028 Exclusionary Policies And Practices Of Foreign Government APR 2003 252.225-7036 Buy American--Free Trade Agreements--Balance of Payments Program--Basic DEC 2017 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports DEC 2018 252.232-7006 Wide Area WorkFlow Payment Instructions DEC 2018 252.232-7010 Levies on Contract Payments DEC 2006 252.244-7000 Subcontracts for Commercial Items JUN 2013 252.246-7003 Notification of Potential Safety Issues JUN 2013 252.246-7005 Notice of Warranty Tracking of Serialized Items MAR 2016 252.246-7008 Sources of Electronic Parts MAY 2018 252.247-7023 Transportation of Supplies by Sea FEB 2019 252.247-7028 Application for U.S. Government Shipping Documentation/Instructions JUN 2012 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (MAY 2019) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91). (3) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015). (4) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (5) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) X (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note). X (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)). X (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755). X(26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Jan 2018) (E.O. 13126). X (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). X (28)(i) 52.222-26, Equal Opportunity (SEPT 2016) (E.O. 11246). X (30)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUL 2014) (29 U.S.C. 793). X (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513). X (49) 52.225-13, Restrictions on Certain Foreign Purchases (JUNE 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). X (55) 52.232-33, Payment by Electronic Funds Transfer'System for Award Management (Oct 2018) (31 U.S.C. 3332). (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509). (ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91). (iv) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (v) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17. (vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). (vii) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246). (viii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212). (ix) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793). (x) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212). (xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (xii) 52.222-41, Service Contract Labor Standards (Aug 2018), (41 U.S.C. chapter 67). (xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67) (xvi) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989). (xvii)52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658). (xviii) (A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a). (B) Alternate I (JAN 2017) of 52.224-3. (xix) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706). (xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). (xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xxii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. 4. Deliveries will be made FOB destination to: Naval Air Warfare Center Aircraft Division Aircraft Support Equipment Staging Facility Highway 547 Building 195 (Hangar 6) JOINT BASE MDL, NJ 08733-4851 Shipping POC:Tara Traendly, (H-1 SE WSM), +1 (555) 000-0000 NOTE: No Friday deliveries will be accepted. 5. Registration in the Department of Defense (DoD) System for Award Management (SAM) database will be a prerequisite for receiving an award. For more information on the SAM, refer to the SAM website at https://www.sam.gov/portal/public/SAM. Please ensure that your company's SAM account is active and provide your company's CAGE code within your quote. 6. Quotes shall be valid for a period of no less than 60 days. 7. Please provide one (1) electronic copy of the quote to the Naval Air Warfare Center-Aircraft Division, Attn: George Ball ( 2.5.2.2.3.4), Bldg. 562, Room 306, Naval Air Engineering Center Lakehurst, Hwy 547, Joint Base MDL, NJ 08733-1903 as soon as possible, but not later than 1/9/2020. 8. Payment will be provided once invoices are submitted through the Government's Wide Area Workflow system at https://wawf.eb.mil/. Payment terms: Net 30 days. No contract financing will be provided for this effort. 9. This request neither implies nor requests the commencement of any effort. Further, the Government shall incur no obligation whatsoever as a result of this proposal request if a contract is not executed. 10. Please direct all questions to: George Ball, (732)-323-1862, E-mail: contact@example.gov. 12. If there are any recent sales for the requested item/s, or a price list that can be used to justify the pricing of the requested item/s, please send that information along with your official quote.

More opportunities from Department Of Defense → Navair Warfare Ctr Aircraft Division

Same awarding agency

NAICS: 811310
New
Federal
Crane Hoist and Conductor Bar Upgrade
Solicitation # N6833527Q1037
This procurement is for a firm-fixed-price contract to upgrade the hoist and conductor bar on bridge crane 148-12 at the Naval Air Warfare Center Aircraft Division in Lakehurst, New Jersey. The project involves replacing an obsolete 3-ton Detroit hoist and 3-wire conductor bar with a new VFD-controlled 3-ton wire rope hoist and a 4-wire conductor bar. The contractor is responsible for procurement, installation, removal of old equipment, and providing necessary training and manuals. All work must be performed by NAVFAC P-307 certified personnel and comply with various standards, including NAVSEA, ASME, NFPA, and NEMA. Acceptance of the equipment is contingent upon a 125 percent load test performed by government personnel. This is a total small business set-aside under NAICS code 811310. Interested bidders must attend a mandatory site visit on November 12, 2026, and submit security information by November 10, 2026; failure to attend the site visit will result in disqualification. Quotes are due by 12:00 PM EDT on November 30, 2026, and must be submitted electronically. Evaluation will be based on technical description, price reasonableness, and a capabilities statement not exceeding three pages. Additionally, vendors must self-report a Cyber Maturity Model Certification (CMMC) Level 1 Self Assessment before an award can be made. Shipping is FOB Destination, and all costs must be included in the unit prices.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333924
New
Federal
Next Generation Bomb Hoist
Solicitation # N6833526R1012
Solicitation N6833526R1012 is a request for proposal issued by the NAVAIR Warfare Center Aircraft Division for a new Indefinite Delivery Indefinite Quantity (IDIQ) contract to manufacture and deliver Next Generation Bomb Hoist (NGBH) support equipment. The scope of work includes the production of 4 Pilot Production Units (PPUs) and up to 940 full rate production units distributed over a five-year period, along with associated technical data and reports. This procurement is a total small business set-aside, requiring both the prime contractor and all subcontractors to be small businesses without exception. The government will award the contract based on best value, utilizing a trade-off process where technical capability and past performance are significantly more important than price. Key technical requirements include compliance with ANSI/ISO/ASQ Q9001-2008 quality standards, specific welding certifications, and the ability to manufacture Critical Safety Items such as the Cable Assembly. Additionally, CMMC Level 2 self-certification is a material condition of award. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) by November 16, 2026, at 4:00 PM EST. Pricing for production units is structured using a step-ladder model across five quantity tiers.
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 17 days
View Details
NAICS: 334519
New
Federal
MATS Functional Test Set (FMS)
Solicitation # N6833526Q1183
The Naval Air Warfare Center Aircraft Division is soliciting quotes for a Firm-Fixed-Price contract to manufacture, assemble, inspect, and deliver one MATS Functional Test Set (Part Number 90249, NSN 4920-01-566-8231). This procurement is a 100 percent Small Business Set-Aside under NAICS 334519 and supports the Japan Ground Self-Defense Force MV-22B Block C program via Foreign Military Sales. The required delivery is 26 weeks from the date of award, with inspection and acceptance occurring at the point of origin. To be eligible for award, offerors must be registered in the System for Award Management and provide proof of ISO9001 certification. Because the Technical Data Package contains export-controlled Controlled Unclassified Information, offerors must submit a certified DD Form 2345 and proof of CMMC Level 2 Self-Assessment certification to gain access to the drawings. Additionally, a current NIST SP 800-171 assessment must be posted in the Supplier Performance Risk System. Award will be granted to the responsible offeror proposing the lowest evaluated price who meets all technical and non-price acceptability criteria. Recent amendments have updated the solicitation number to N68335-27-Q-1021 and extended the closing date to November 12, 2026. These updates also included revisions to the Technical Data Package and the Statement of Work to incorporate necessary documentation and drawings. All proposals must be submitted electronically via email to the designated point of contact.
Other Measuring and Controlling Device Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 336419
New
Federal
Adapter, Hellfire Missile (Upper) and Adapter, Hellfire Missile (Lower)
Solicitation # N6833526Q1186
The Naval Air Warfare Center Aircraft Division (NAWC-AD) is soliciting quotes for a Firm Fixed Price contract to procure 20 units of Upper Hellfire Missile Adapters (Part 1517AS106-1) and 20 units of Lower Hellfire Missile Adapters (Part 1517AS107-1), along with associated technical data. These items support the AH-1Z and UH-1Y Foreign Military Sales case for the Czech Ministry of Defense. This procurement is a 100% Small Business Set-Aside under NAICS code 336419. The final deadline for submission is November 10, 2026, with all proposals required to be submitted electronically to the point of contact, Juan Carlos Belmonte. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) method. To be considered technically acceptable, offerors must be a certified small business, provide pricing for all CLINs, and commit to a delivery schedule of 90 calendar days after the award date. Due to the presence of Controlled Unclassified Information (CUI) and export-controlled technical data, offerors must provide a certified DD Form 2345 and proof of CMMC Level 2 self-assessment via the Supplier Performance Risk System (SPRS) to access the technical data packages. Additionally, the contract requires strict adherence to MIL-STD-129 and MIL-STD-130 for packaging, marking, and unique item identification. Shipping is quoted as FOB Origin, with hardware delivery to Gulfport, Mississippi, and technical data delivery to Joint Base MDL, New Jersey.
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
Federal
HIGH LIFT ADAPTER ADU-954/E, Outriggers, Push Up Adapter
Solicitation # N6833526R1091
Solicitation N68335-26-R-1091 is a Small Business Set Aside for a five-year Indefinite Delivery Indefinite Quantity (IDIQ) fixed-price contract to manufacture and deliver peculiar support equipment for the F/A-18E/F and EA-18G programs. The scope of work includes the production of High Lift Adapter Outriggers (P/N 4097AS265-1), Push Up Adapters (P/N 4097AS200-1), and MHU-191 Munitions Loaders (P/N 3992AS100-1), along with associated Proof Load Certificates. These items are destined for the US Navy, with delivery to Lakehurst, and the Royal Australian Air Force, with delivery to a freight forwarder in California. All equipment must be new, covered by a manufacturer warranty, and adhere to strict marking and packaging standards, including MIL-STD-130, MIL-STD-129R, and ASTM D3951-18. Award will be determined using a best-value trade-off process weighing price and delivery lead time as approximately equal factors. To be technically acceptable, offerors must be registered small businesses in SAM.gov, propose a delivery schedule of eight months or less, and provide a detailed delivery narrative. Critical compliance requirements include CMMC Level 2 certification and a current NIST SP 800-171 assessment recorded in the Supplier Performance Risk System. Proposals must include comprehensive cost and pricing data, with certified data required for thresholds exceeding 10 million dollars. All submissions are due by November 23, 2026, to the designated point of contact.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

3 days ago

DEADLINE

in 24 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS