COLLAPSIBLE JMIC 3.0K

COLLAPSIBLE JMIC 3.0K
COLLAPSIBLE JMIC 3.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY UNLESS OTHERWISE NOTED
SPE8ED-26-T-1382
SECTION B
FIRST ARTICLE TESTING IS REQUIRED
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Color: TAN
P/N: 7517221-2
TDP Rev B Gen 2 IAW BASIC DRAWING NR 53711 7517221 REVISION NR G DTD 08/13/2014 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7516536 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7516617 REVISION NR DTD 06/16/2006 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7516774 REVISION NR DTD 10/11/2006 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517221 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517168 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517169 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517170 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517171 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517172 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517173 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2
SPE8ED-26-T-1382
SECTION B
IAW REFERENCE DRAWING NR 53711 7517174
REVISION NR B DTD 11/01/2005
PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517175 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517176 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517177 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517178 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517179 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517222 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517223 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517224 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517226 REVISION NR C DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517227 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517228 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517229 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517230 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2
SPE8ED-26-T-1382
SECTION B
IAW REFERENCE DRAWING NR 53711 7517231
REVISION NR DTD 08/02/2010
PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517232 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517233 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517234 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517225 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517235 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517236 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517237 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517238 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517239 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517240 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517241 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517242 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517244 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2
SPE8ED-26-T-1382
SECTION B
IAW REFERENCE DRAWING NR 53711 7517245
REVISION NR DTD 08/02/2010
PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517246 REVISION NR B DTD 11/06/2009 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517247 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517248 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517249 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517250 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517251 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517252 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517253 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517254 REVISION NR C DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517255 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517256 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517257 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517258 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2
SPE8ED-26-T-1382
SECTION B
IAW REFERENCE DRAWING NR 53711 7517259
REVISION NR DTD 08/02/2010
PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517260 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517261 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 8410933 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 8410941 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 8410942 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 53711 7517221 REVISION NR DTD 10/13/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517221 REVISION NR F DTD 07/19/2021 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 14153 SQAP-FAT3 REVISION NR DTD 08/26/2025 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 14153 SQAP-PLT3 REVISION NR DTD 07/17/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018226744 0001 EA 2.000
NSN/MATERIAL:8145015881830
DELIVERY (IN DAYS):0220
DELIVER FOB: ORIGIN
SPE8ED-26-T-1382
SECTION B
PR: 7018226744 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N00178
NSWC DAHLGREN
COMPTROLLER C1B
17632 DAHLGREN ROAD SUITE 202
DAHLGREN VA 22448-5154
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N00178
NSWC DAHLGREN
RECEIVING OFFICER DAHLGREN DIV
6220 TISDALE RD SUITE 159 BLDG 125
DAHLGREN VA 22448-5114
US
M/F: (TCN) N0017862445788
RDD: 259
PROJ: TV4 TP 2
SUPP ADD: N00178 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 07
DIC: A4A DIST: 9B ADV: 2L FC: JO
Need Ship Date:00/00/0000 Original Required Delivery Date:09/08/2026
GOVERNMENT FIRST ARTICLE TEST – THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-4 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE8ED-26-T-1382
SECTION B
PR: PRLI: CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 0000000000 EA 1.000
NSN/MATERIAL:0001S00000052
DELIVERY (IN DAYS):0150
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000

PRODUCTION LOT TESTING GOVERNMENT TESTING REQUIRED (REFER TO
PROCUREMENT NOTE E04 FOR ADDITIONAL INFORMATION)
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 0000000000 EA 1.000
NSN/MATERIAL:S00000061
DELIVERY (IN DAYS):0200
THIS LINE ITEM SIGNIFIES THE PRODUCTION LOT TEST REQUIREMENT (PLT).
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
SPE8ED-26-T-1382
SECTION B
PR: PRLI: CONT’D
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000

SPE8ED-26-T-1382 NSN/Part Number: 8145-01-588-1830 Quantity: 2 EA Purchase Request: 7018226744QTY: 2 Delivery: 220 days ADO