Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

COLLAPSIBLE JMIC 3.0K

Open
SPE8ED-27-T-0200Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by DLA Troop Support, Construction & Equipment Containers, is for the procurement of two Collapsible JMIC 3.0K units under NSN 8145-01-588-1830. The items must be tan in color and manufactured according to TDP Rev B Gen 2, adhering to a extensive list of reference drawings and quality assurance provisions. The contract requires both First Article Testing (FAT) and Production Lot Testing (PLT), with the government's testing cost of $15,000.00 serving as a factor in the evaluation of offers. Delivery is required within 250 days after the order, with inspection and acceptance occurring at the point of origin. The contractor must comply with strict material restrictions, including the prohibition of asbestos and the intentional addition of mercury, and must adhere to the Berry Amendment and Buy American Act. Packaging must follow ASTM D3951 and RP001, with marking and labeling conducted per MIL-STD-129 and MIL-STD-130N. Quality conformance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Additionally, the contract mandates strict cybersecurity safeguarding of covered defense information and prohibits the use of covered defense telecommunications equipment. All quotes must be submitted via the DIBBS portal.

General Info

DLA procurement of two tan Collapsible JMIC 3.0K units with strict specifications.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

NAICS

332439 - Other Metal Container Manufacturing

Place of Performance

6200 FLAGSHIP CIRCLE BLOUNT ISLAND, JACKSONVILLE, FL, 32226-3404, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this first27 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

2 updates
PhaseSolicitation
Posted

Solicitation

Notice updated

The notice title changed. The notice description changed.

Notice updated

The notice title changed. The notice description changed.

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS
Office AddressUSA
Contacts
Ogden Howard
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COLLAPSIBLE JMIC 3.0K
COLLAPSIBLE JMIC 3.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY UNLESS OTHERWISE NOTED
SPE8ED-27-T-0200
SECTION B
FIRST ARTICLE TESTING IS REQUIRED
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Color: TAN
P/N: 7517221-2
TDP Rev B Gen 2 IAW BASIC DRAWING NR 53711 7517221 REVISION NR G DTD 08/13/2014 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7516536 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7516617 REVISION NR DTD 06/16/2006 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7516774 REVISION NR DTD 10/11/2006 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517221 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517168 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517169 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517170 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517171 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517172 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517173 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2
SPE8ED-27-T-0200
SECTION B
IAW REFERENCE DRAWING NR 53711 7517174
REVISION NR B DTD 11/01/2005
PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517175 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517176 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517177 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517178 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517179 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517222 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517223 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517224 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517226 REVISION NR C DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517227 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517228 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517229 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517230 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2
SPE8ED-27-T-0200
SECTION B
IAW REFERENCE DRAWING NR 53711 7517231
REVISION NR DTD 08/02/2010
PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517232 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517233 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517234 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517225 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517235 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517236 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517237 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517238 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517239 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517240 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517241 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517242 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517244 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2
SPE8ED-27-T-0200
SECTION B
IAW REFERENCE DRAWING NR 53711 7517245
REVISION NR DTD 08/02/2010
PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517246 REVISION NR B DTD 11/06/2009 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517247 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517248 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517249 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517250 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517251 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517252 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517253 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517254 REVISION NR C DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517255 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517256 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517257 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517258 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2
SPE8ED-27-T-0200
SECTION B
IAW REFERENCE DRAWING NR 53711 7517259
REVISION NR DTD 08/02/2010
PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517260 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517261 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 8410933 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 8410941 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 8410942 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 53711 7517221 REVISION NR DTD 10/13/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517221 REVISION NR F DTD 07/19/2021 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 14153 SQAP-FAT3 REVISION NR DTD 08/26/2025 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 14153 SQAP-PLT3 REVISION NR DTD 07/17/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019008220 0001 EA 2.000
NSN/MATERIAL:8145015881830
DELIVERY (IN DAYS):0250
DELIVER FOB: ORIGIN
SPE8ED-27-T-0200
SECTION B
PR: 7019008220 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
MMV200
COMMANDING OFFICER
BIC GENERAL ACCOUNT (MMV200)
6200 FLAGSHIP CIRCLE BLOUNT ISLAND
JACKSONVILLE FL 32226-3404
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
MMV200
DISTRIBUTION MANAGEMENT OFFICE
6200 FLAGSHIP CIRCLE BLOUNT ISLAND
M/F: MMV200 BIC GENERAL ACCOUNT
JACKSONVILLE FL 32226-3404
US
M/F: (TCN) MMV20063020325
RDD: 312
PROJ: TP 2
SUPP ADD: YREPLN SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: ADV: 23 FC: CS
Need Ship Date:00/00/0000 Original Required Delivery Date:11/03/2026
GOVERNMENT FIRST ARTICLE TEST – THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-4 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE8ED-27-T-0200
SECTION B
PR: PRLI: CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 0000000000 EA 1.000
NSN/MATERIAL:0001S00000052
DELIVERY (IN DAYS):0150
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000

PRODUCTION LOT TESTING GOVERNMENT TESTING REQUIRED (REFER TO
PROCUREMENT NOTE E04 FOR ADDITIONAL INFORMATION)
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 0000000000 EA 1.000
NSN/MATERIAL:S00000061
DELIVERY (IN DAYS):0230
THIS LINE ITEM SIGNIFIES THE PRODUCTION LOT TEST REQUIREMENT (PLT).
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
SPE8ED-27-T-0200
SECTION B
PR: PRLI: CONT’D
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000

SPE8ED-27-T-0200 NSN/Part Number: 8145-01-588-1830 Quantity: 2 EA Purchase Request: 7019008220QTY: 2 Delivery: 250 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332439
New
DIBBS
Manufacture of NAS1715 Loop Clamps
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-27-T-4240
This procurement, issued by the DLA Weapons Support Land Supply Chain, is a small business set-aside for the acquisition of 1,525 loop clamps (NSN 5340-01-458-8642). The items are identified as commercial products and must be manufactured in accordance with the current revision of the NAS1715 part standard. Delivery is required within 127 days after order, with a need ship date of March 24, 2027, and a final delivery date of May 30, 2027. The goods are to be delivered FOB Destination to the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict quality and safety standards, including a prohibition on the intentional addition of mercury. Inspection and acceptance will occur at the destination, utilizing a zero-based sampling plan per MIL-STD-1916 or ASQ H1331. Packaging must comply with DLA requirements (RP001) and MIL-STD-129 for marking, with specific protocols for hazardous materials under FED-STD-313. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and registration via the DLA Account Management and Provisioning System (AMPS) for shipment tracking.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
DRUM, SHIPPING AND STOR
Solicitation # SPE8ED-27-Q-0066
Solicitation SPE8ED-27-Q-0066 is a request for quotations from DLA Troop Support for the procurement of 95,000 shipping and storage drums, identified by NSN 8110-01-467-0963. The drums must be 208-liter (55-gallon) 18-gauge steel containers with a white exterior, featuring a round tight head with a non-removable top and specific bung access. Technical requirements specify an unlined interior coated with a rust inhibitor, compliance with UN 1A1/Y1.7/100 performance tests, and marking in accordance with 49 CFR 178 Subparts L and M. The procurement is based on a firm fixed price with delivery required within 120 days after order, with a specific need date of June 28, 2026. The contract mandates strict quality and packaging standards, including adherence to Basic Drawing NR14153 RE-014670963 and sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must follow ASTM D3951 and RP001 for palletization, while labeling must comply with MIL-STD-129. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, whistleblower rights, and the Buy American Act. Quotations must be submitted through the DIBBS portal by October 27, 2026.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 332439
New
DIBBS
REPAIR KIT, FIELD ISU C
Solicitation # SPE8E9-27-T-0469
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-27-T-4309
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
Manufacture of Loop Clamps (SAE AS21919D)This subcontract involves the manufacture of 4,646 loop clamps under NSN 5340-01-497-9278 for the DLA Weapons Support Fluid Handling Division. The project requires strict adherence to SAE AS21919D Revision D and the DLA Master List of Technical and Quality Requirements. Performance will take place at Tinker AFB, and the contractor must utilize precision metal forming and pressing equipment capable of maintaining rigorous aerospace tolerances. The contract is subject to the Buy American Act and falls under NAICS code 332439. Interested parties must submit responses by November 16, 2026, to provide the finished units as specified in the technical requirements.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
Precision Shim Manufacturing and Supply (NSN 5365-00-406-7790)This subcontract involves the fabrication and supply of 63 precision shims under NSN 5365-00-406-7790 for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The scope of work includes manufacturing components to exact specifications, performing packaging and marking according to MIL-STD-2073-1E and MIL-STD-129, and executing palletization per RP001 for delivery to DLA Distribution facilities. To be eligible, the provider must maintain US/Canada Joint Certification Program certification, a NIST SP 800-171 assessment, and CMMC Level 2 certification. The project falls under NAICS code 332439 and is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located in San Diego, California.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332439
New
DIBBS
Precision Shim Fabrication (NSN 5365011203489)This subcontract involves the fabrication of 184 precision shims for the DLA Weapons Support Fluid Handling Division, specifically under NSN 5365011203489 and Eaton Aerospace P/N MC14848. The selected provider must utilize precision metal pressing or machining techniques that strictly adhere to the DLA Master List of Technical and Quality Requirements. All finished units must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract requires full compliance with the Buy American Act and the Berry Amendment. Performance will take place in Jacksonville, Florida, under NAICS code 332439. Interested parties must submit their responses by November 16, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7M4-27-T-2401
Solicitation SPE7M4-27-T-2401, issued by the DLA Weapons Support Fluid Handling Division, is a small business set-aside procurement for 4,646 loop clamps (NSN 5340-01-497-9278). The items must be manufactured according to the current revision of the part standard, specifically SAE AS21919D Revision D. Delivery is required within 168 days after the order, with a need ship date of May 4, 2027, and an original required delivery date of July 19, 2027. The contract is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-130N for military property identification. Prohibitions are in place regarding the use of Class I ozone-depleting chemicals, and hazardous materials must be labeled per the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Key regulatory compliance includes the Buy American Act, DFARS cybersecurity reporting requirements, and the prohibition of covered defense telecommunications equipment.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
COUPLING, CLAMP, GROOVED
Solicitation # SPE4A7-27-T-2904
Solicitation SPE4A7-27-T-2904, issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div, is for the procurement of 61 units of grooved clamp couplings (NSN 5342-00-597-8578575). This is identified as a critical application item, with referenced part numbers from Eaton Aeroquip LLC and V I J Corp. The required delivery date is March 21, 2027, with a need ship date of May 4, 2027, and a delivery lead time of 171 days after receipt of order. Delivery is FOB destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict quality and packaging standards, requiring compliance with ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing sampling methods aligned with MIL-STD-1916 or ASQ H1331. Technical and quality requirements are governed by the DLA Master List, which takes precedence over other packaging standards. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to DFARS regulations regarding cybersecurity, the Buy American Act, and the prohibition of certain telecommunications equipment.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332439
New
DIBBS
COLLAPSIBLE JMIC 3.0K
Solicitation # SPE8ED-27-Q-0047
Solicitation SPE8ED-27-Q-0047 is a Firm Fixed Price contract issued by DLA Troop Support Construction and Equipment Containers for the procurement of Collapsible JMIC 3.0K units in tan color, part number 7517221-2. The requirement is split across four line items totaling 81 units, with delivery scheduled for 240 days after order. Inspection and acceptance are conducted at the origin, with freight shipping directed to the Distribution Management Office at Camp Lejeune, North Carolina. The contract mandates strict quality and technical compliance, including required First Article Testing and production lot testing. Sampling must follow MIL-STD-1916 or ASQ H1331, and the use of asbestos or intentionally added mercury is prohibited. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling compliant with MIL-STD-129. Key regulatory requirements include DFARS cybersecurity reporting, Buy American preferences, and various FAR clauses regarding labor and human rights. Payment is processed electronically via the Wide Area WorkFlow system.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332439
New
DIBBS
SHIM
Solicitation # SPE4A7-27-T-3074
Solicitation SPE4A7-27-T-3074 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the procurement of shims under NSN 5365-00-406-7790. The requirement consists of two line items totaling 63 units, with 21 units for CLIN 0001 and 42 units for CLIN 0002. Deliveries are to be made to DLA Distribution facilities, specifically the DDSP New Cumberland Facility and DLA Distribution San Diego, with an original required delivery date of March 24, 2027. The contract specifies destination inspection per FAR 52.246-2 and requires the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment processing. This procurement is subject to strict export control regulations under ITAR and EAR, requiring offerors to possess an approved US/Canada Joint Certification Program (JCP) certification and DLA approval to access technical data. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific palletization requirements per RP001. The solicitation incorporates several critical FAR and DFARS clauses, including NIST SP 800-171 assessment requirements, the Buy American and Balance of Payments Program, and CMMC Level 2 certification standards. Quotations must be submitted to Keanna Banks by November 13, 2026, based on FOB Origin pricing.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Same awarding agency

NAICS: 333998
New
DIBBS
POST, JUNCTION, SPAN,
Solicitation # SPE8ED-27-T-0150
Solicitation SPE8ED-27-T-0150 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment Containers for the procurement of 65 units of Post, Junction, Span, Male, identified by NSN 5420003719903. This non-small business set-aside is a Foreign Military Sales requirement for South Korea, with delivery destined for the Army 2nd Supply Depot in Busan. The items must be manufactured in accordance with Basic Drawing NR 97403 D-2738-1 Revision C and must not incorporate Class I ozone depleting chemicals. Delivery is required within 20 days after receipt of order, with an original required delivery date of April 22, 2025, under FOB Origin terms. The contract mandates strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the point of origin. Offerors must submit quotes via the DLA Internet Bid Board System by November 5, 2026. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 4 days
View Details
NAICS: 484220
New
DIBBS
Freight Shipping to Camp LejeuneThis subcontract involves the freight shipping of 81 JMIC units to support prime contractors fulfilling Department of Defense contracts for DLA Troop Support Construction and Equipment Containers. The scope of work requires the traceable transport of these units from their origin to the Distribution Management Office located at Camp Lejeune, North Carolina. To accommodate oversized collapsible units, the contractor must utilize heavy-haul trailers to ensure safe and efficient delivery to the designated DMO location. This operation falls under NAICS code 484220, focusing on specialized freight transportation services.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339999
New
DIBBS
Military-Grade Packaging and PalletizationThis subcontract for Military-Grade Packaging and Palletization supports prime contractors delivering for the Department of Defense under DLA Troop Support Construction and Equipment Containers. The scope of work involves providing all necessary packaging materials and executing the packing, marking, and palletization of units to ensure they are secured and labeled for military freight transport. Performance will take place at Camp Lejeune, North Carolina. Strict adherence to military and industry standards is required, specifically ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. Interested parties should note the response deadline of November 12, 2026, for this requirement categorized under NAICS code 339999.
All Other Miscellaneous Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332312
New
DIBBS
Manufacturing of Collapsible JMIC 3.0K UnitsThis subcontract involves the fabrication and assembly of 81 Collapsible JMIC 3.0K units to support prime contractors for the Department of Defense, specifically DLA Troop Support Construction and Equipment Containers. The scope of work requires structural assembly according to Part Number 7517221-2, the application of a tan finish, and the delivery of fully completed and painted units. Quality assurance is a critical component of the contract, requiring First Article Testing per DI-NDTI-80809B and production lot testing conducted under MIL-STD-1916 or ASQ H1331 standards. The project falls under NAICS code 332312, with the place of performance located at Camp Lejeune.
Fabricated Structural Metal Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332312
New
DIBBS
Supply of ISO-Compatible Utility Freight Containers (QUADCONS)This subcontract with Construction and Equipment Containers for the Department of Defense involves the manufacture and supply of 149 QUADCON utility freight containers. The containers must be produced according to NSN 8150-01-483-9115 specifications, featuring Green 34094 paint and ensuring full ISO compatibility for 20 foot configurations. The scope of work includes strict adherence to DoD item unique identification standards and palletization following RP001 DLA Packaging Requirements. The final deliverable consists of 149 palletized units intended for prime contractors on DLA supply contracts.
Fabricated Structural Metal Manufacturing

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332439
New
DIBBS
Supply of Steel Hazardous Material Disposal DrumsThis subcontract with Construction and Equipment Containers for the Department of Defense involves the supply of 63 steel shipping and storage drums under NSN 8110011014055. The contractor is responsible for manufacturing or sourcing 322-liter drums and must perform pressure testing to ensure air eligibility to a minimum of 100 KPA, including the necessary marking of the drums per specifications. To be eligible, the provider must possess the required pressure testing equipment and maintain an active SAM registration. The performance of this contract will take place in Tracy, California, supporting prime contractors who deliver DLA Troop Support supply contracts.
Other Metal Container Manufacturing

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Heavy Equipment Freight TransportThis subcontract, titled Heavy Equipment Freight Transport, involves the transportation of two oversized liquid storage tanks for prime contractors working on Department of Defense projects. The selected provider is responsible for loading and securing the tanks using flatbed trucks and heavy-lift equipment, ensuring delivery to the designated destination for inspection and acceptance within a 90-day ADO window. To qualify for this engagement, contractors must possess standard DOT certifications and valid commercial trucking licenses. The project falls under NAICS code 484220 and is managed through Construction & Equipment Containers for the Department of Defense.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 336992
New
DIBBS
Liquid Storage Tank SupplierThis subcontract, issued by Construction and Equipment Containers for the Department of Defense, requires the procurement of two liquid storage tanks. The supplier must provide model GTA-10KF-SL-3 tanks that strictly adhere to NSN 5430-01-675-8930 specifications. To ensure eligibility, the contractor is required to provide producer CAGE and facility details while maintaining full compliance with FAR 52.240-91 security prohibitions. The contract falls under NAICS code 336992 and involves the physical delivery of the units to a designated destination. Interested parties must have submitted their responses by the deadline of November 11, 2026.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 332439
New
DIBBS
Supply of NSN 8145-01-512-0923This subcontract involves the procurement and supply of one unit of NSN 8145-01-512-0923 for prime contractors supporting the Department of Defense. The selected provider is responsible for manufacturing or procuring the item while ensuring all specifications strictly align with NSN requirements. Performance takes place in San Diego, with a focus on meeting rigorous military standards for logistics and quality control. Key operational requirements include packing according to MIL-STD-129 and palletization per RP001. Additionally, the contractor must provide receiving reports that comply with DFARS Appendix F requirements. The solicitation was posted on November 4, 2026, with a response deadline of November 16, 2026, under NAICS code 332439.
Other Metal Container Manufacturing

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 423830
New
DIBBS
Supply of Cable Reels (NSN 8130006561090)This subcontract involves the procurement of two specialized cable reels under NSN 8130006561090 to support prime contractors fulfilling Department of Defense supply contracts. The selected provider is responsible for sourcing hardware that meets exact specifications and ensuring all units are delivered to the designated DLA receiving office in Gunpowder. Strict compliance with military standards is required for the fulfillment of this order. All items must be packaged according to RP001 DLA Packaging Requirements and marked in accordance with MIL-STD-129 to ensure proper shipment and storage. The contract falls under NAICS code 423830 and is managed through Construction and Equipment Containers.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 10 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS