COLLAPSIBLE JMIC 3.0K

COLLAPSIBLE JMIC 3. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT DLA DURING "OPEN SOLICITATION ONLY". TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)> FOR EBS SOLICITATIONS USE URL HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). NO ASBESTOS AS DEFINED IN FED-STD-313 IS PERMITTED IN THIS ITEM MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY UNLESS OTHERWISE NOTED FIRST ARTICLE TESTING IS REQUIRED
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SPE8ED-26-Q-0677
SECTION B
SUPPLY/SERVICE: 8145-01-588-1830 CONT'D
Color: TAN
P/N: 7517221-2
TDP Rev B Gen 2 IAW BASIC DRAWING NR 53711 7517221 REVISION NR G DTD 08/13/2014 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7516536 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7516617 REVISION NR DTD 06/16/2006 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7516774 REVISION NR DTD 10/11/2006 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517221 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517168 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517169 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517170 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517171 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517172 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517173 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517174 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517175 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517176 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517177 REVISION NR A DTD 08/02/2010
SPE8ED-26-Q-0677
SECTION B
SUPPLY/SERVICE: 8145-01-588-1830 CONT'D
PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517178 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517179 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517222 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517223 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517224 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517226 REVISION NR C DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517227 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517228 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517229 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517230 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517231 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517232 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517233 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517234 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517225 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
SPE8ED-26-Q-0677
SECTION B
SUPPLY/SERVICE: 8145-01-588-1830 CONT'D
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517235 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517236 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517237 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517238 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517239 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517240 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517241 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517242 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517244 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517245 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517246 REVISION NR B DTD 11/06/2009 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517247 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517248 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517249 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517250 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517251
SPE8ED-26-Q-0677
SECTION B
SUPPLY/SERVICE: 8145-01-588-1830 CONT'D
REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517252 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517253 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517254 REVISION NR C DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517255 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517256 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517257 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517258 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517259 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517260 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517261 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 8410933 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 8410941 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 8410942 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 53711 7517221 REVISION NR DTD 10/13/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517221 REVISION NR F DTD 07/19/2021 PART PIECE NUMBER:
SPE8ED-26-Q-0677
SECTION B
SUPPLY/SERVICE: 8145-01-588-1830 CONT'D
TDP Rev B Gen 2 IAW REFERENCE QAP 14153 SQAP-FAT3 REVISION NR DTD 08/26/2025 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 14153 SQAP-PLT3 REVISION NR DTD 07/17/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 8145-01-588-1830 80.000 EA $ _______________ $ ______________ COLLAPSIBLE JMIC 3.0K
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 90 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W33BQ9
W6YG USALRCTR FT BENNING AWCF SSF BLDG 9057 IVY RD FORT BENNING GA 31905 US
RDD 555 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W33BQ9
W6YG USALRCTR FT BENNING AWCF SSF BLDG 9057 IVY RD FORT BENNING GA 31905 US
SPE8ED-26-Q-0677
SECTION B
SUPPLY/SERVICE: 8145-01-588-1830 CONT'D
MARKFOR
W33BQ9
W6YG USALRCTR FT BENNING AWCF SSF BLDG 9057 IVY RD FORT BENNING GA 31905 US
M/F: (TCN) W33BQ962160548 RDD: 555 PROJ: TP 3 SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A0A DIST: V ADV: FC: Z9
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7017841309 0001 N/A N/A N/A 08/10/2026

SPE8ED-26-Q-0677 NSN/Part Number: 8145-01-588-1830 Quantity: 80 EA Purchase Request: 7017841309QTY: 80 Delivery: 90 days ADO