This Solicitation opportunity from Department Of Defense was posted on July 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

COLLAR, BRACE, AIRCRA

Closed

SPE8EF-26-T-1514Federal

Submission Closed08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

DIBBS

Aircraft Windshield Panel Supplier (NSN 1560015210182)This subcontract involves the fabrication and supply of 104 new, unused aircraft windshield panels for prime contractors supporting DLA supply contracts. The supplier must produce the panels to the technical specifications of NSN 1560015210182, utilizing precision molding equipment and aviation-grade transparent materials. To be eligible, the contractor must be an OEM or an approved source with a valid CAGE code. The contract mandates strict adherence to DPAS regulations and requires all items to be marked according to MIL-STD-129. Managed by the Department of Defense under the DLA Weapons Support ASC, the project falls under NAICS code 336413. Responses for this requirement are due by November 4, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacturer of Wiper Plate Assembly (PN 627915-1)This subcontract involves the fabrication and assembly of two Wiper Plate Assemblies (PN 627915-1) for prime contractors supporting DLA Weapons Support ASC projects. All manufacturing must strictly adhere to Naval Air Warfare Center Drawing 627915 Rev C and TDP Rev B Gen 5, with a specific prohibition against the use of additive manufacturing. Final products must be inspected and packaged according to MIL-STD-2073-1E standards. To be eligible, the manufacturer must maintain SAE AS9003 or ISO 9001 quality systems and hold a valid JCP certification to access necessary technical data. The project is managed under the Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Div, with performance located in Tracy, California. Responses are due by November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Manufacturing of Retractor AssembliesThis subcontract involves the precision manufacturing and assembly of 119 Retractor Assemblies and Weapon Cradle Adapters for prime contractors under Department of Defense DLA supply contracts. The work requires strict adherence to Basic Drawing NR 30003 556AS164 Revision H and TDP Rev A Gen 1, utilizing precision CNC machining and specialized assembly jigs. Performance will take place in New Cumberland, Pennsylvania. To be eligible, the contractor must be an OEM-approved source or successfully obtain OEM approval. Additionally, the provider must maintain rigorous cybersecurity standards, ensuring full compliance with CMMC Level 2 and NIST SP 800-171. Responses for this requirement are due by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Manufacturing of Aircraft Ground Servicing CoversThis subcontract involves the manufacturing of aircraft ground servicing covers for prime contractors supporting DLA Troop Support supply contracts. The scope of work requires the fabrication of 24 covers per NSN 1730016922679 and P/N 23060204, with all production adhering to the DLA Master List of Technical and Quality Requirements. A critical mandate of the agreement is strict compliance with the Berry Amendment to ensure all materials are sourced domestically. Managed under NAICS code 336413 for the Department of Defense, the project is overseen by Construction & Equipment Manu & Con. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 28, 2026, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Manufacturing of Cam Assembly, Cove Lip DoorThis subcontract involves the manufacture of two completed and inspected Cam Assemblies for Cove Lip Doors, supporting aerospace projects for the DLA Weapons Support ASC. The work requires forging and precision machining in strict accordance with Basic Drawing NR 81205 65-18455 Rev B, necessitating the use of industrial forging presses and CNC machining centers. Performance will take place at Tinker AFB. To be eligible, the contractor must maintain specific high-level certifications, including JCP certification, a Boeing Rights Guard License, and CMMC Level 2 compliance. The opportunity was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 336413.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Actuator Ring Sets (NSN 1650011934050)This subcontract involves the supply of 104 Critical Application Item actuator ring sets, identified by NSN 1650011934050, for prime contractors supporting Defense Logistics Agency aviation supply contracts. The contractor is responsible for manufacturing or sourcing part number C5791-30 in strict accordance with Tactair Fluid Controls Inc specifications. To ensure operational readiness and safety, all units must undergo quality inspections following MIL-STD-1916 and MIL-STD-105/ASQ Z1.4 standards. Additionally, the contractor must adhere to ASTM D3951 and MIL-STD-129 requirements for the packaging and labeling of the items before delivery.

Defense Logistics Agency

POSTED

DEADLINE

Manufacture of Packing with Retainer (P/N [phone hidden])This subcontract involves the precision manufacture of 29 Packing with Retainer assemblies for the Department of Defense under the DLA Weapons Support Nuclear Reactor Program. The components must be machined to meet Honeywell Aerospace part number [phone hidden] and NSN 5330-01-721-8818 specifications. Performance will take place in New Cumberland, Pennsylvania. Strict adherence to quality and safety standards is required, specifically compliance with RA001 quality requirements for Critical Application Items and NAVSEA 5100-003D mercury-free mandates. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Aircraft Swaging Sleeve FabricationThis subcontract involves the fabrication of 734 precision aircraft swaging sleeves for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The contractor is responsible for utilizing CNC machining or swaging equipment and aerospace-grade alloys to meet strict aerospace tolerances for NSN 4030-00-641-3921. In addition to the finished sleeves, the provider must deliver product verification test samples. Compliance requirements are stringent, necessitating CMMC Level 2 certification and adherence to ITAR and EAR regulations. All work must be performed in accordance with MIL-STD-1916 or ASQ H1331 standards. The solicitation was posted on October 28, 2026, with a response deadline of November 7, 2026, falling under NAICS code 336413.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacturing of Housing, Drogue Gun (NSN 1377LLNCA6552)This subcontract involves the manufacture of three finished and inspected Drogue Gun housings under NSN 1377LLNCA6552 for prime contractors supporting the DLA Fleet Readiness Center Southeast. The project requires the fabrication of parts according to P/N 472P315D002-7 and the DLA Master List of Technical and Quality Requirements, with performance taking place in Jacksonville. Due to the nature of the components, the contractor must utilize precision CNC machining and strictly adhere to Critical Safety Item standards. Additionally, the provider is required to maintain AS9100 certification to ensure compliance with aerospace quality management systems.

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

DEADLINE

Aerospace-Grade Alloy SupplierThis subcontract involves the supply of certified aerospace-grade raw materials to prime contractors supporting Department of Defense Construction and Equipment MRO SVC I contracts. The supplier is responsible for providing alloys that strictly adhere to technical specifications for NSN 4930-01-552-0232. To ensure full regulatory compliance, the provider must furnish Mill Test Reports verifying that all materials meet the requirements of the Buy American Act and the Berry Amendment. The performance of this contract will take place in Tracy, California, under NAICS code 336413. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Critical Fluid Filter Elements (NSN 1650-01-669-3854)This subcontract involves the supply of four critical fluid filter elements, specifically Boeing part number 1732030 and NSN 1650-01-669-3854, for prime contractors under the Department of Defense DLA Weapons Support ASC. The contractor is responsible for manufacturing or sourcing these elements in strict accordance with TDP Rev A Gen 3 and QAP 13873. Performance takes place at Tinker AFB and requires adherence to ISO 9001:2015 quality systems and MIL-STD-1916 sampling standards. Essential compliance requirements include FAA Airworthiness Approval and adherence to DFARS Buy American regulations. All delivered units must be accompanied by full traceability and comprehensive airworthiness documentation to ensure flight safety and regulatory alignment. The opportunity is categorized under NAICS code 336413.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Dual Breakaway, Aux (NSN 1680015876928)This HUBZone set-aside subcontract involves the supply of seven Dual Breakaway, Aux units (NSN 1680015876928) for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The contractor is responsible for manufacturing or sourcing Part Number 21901-939, which is designated as a Critical Application Item. Delivery is required FOB Origin to New Cumberland, Pennsylvania. Strict adherence to quality and regulatory standards is mandatory, including quality control per MIL-STD-1916 or ASQ H1331 and marking and labeling according to MIL-STD-129 and MIL-STD-130 IUID. Additionally, the provider must maintain Buy American Act compliance and complete a CMMC Level 2 Self-Assessment. The response deadline for this requirement is November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days

AI Contract Overview

The contract pertains to the procurement of five units of a collar and brace component for aircraft, identified by NSN 1730-00-910-0323, under solicitation SPE8EF-26-T-1514, with a response deadline of August 7, 2026, and a delivery requirement of five days after award. The item is subject to stringent cybersecurity requirements, mandating that the vendor be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO), ensuring compliance with federal defense information protection standards. Technical and quality specifications referenced in the DLA Master List apply, with compliance determined by the version in effect at the time of solicitation or award. The technical data associated with this item is controlled under ITAR or EAR regulations, prohibiting any export, including disclosure to foreign nationals within the U.S., without prior government authorization. Only contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DLA training and questionnaires, are permitted to handle this controlled data. Packaging, marking, and removal of government identification from non-accepted supplies must adhere to DLA-specific requirements, and the item’s place of performance and contract management are overseen by the Department of Defense through the Defense Logistics Agency, with Russell Keiser as the primary point of contact.

General Info

Procure five collar and brace components under CMMC Level 2, ITAR/EAR control, with DLA oversight and US/Canada certification.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

BRA

Set-Aside

NONE

Documents

RFQ SPE8EF-26-T-1514 for DLA Troop Support Construction Equipment

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 27

Solicitation

Response DeadlineAug 7

Deadline has passed

Submission Closed

08/07/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Office AddressUSA

Contacts

Russell Keiser

contact@example.gov

+1 (555) 000-0000

Full Description

COLLAR,BRACE,AIRCRA
COLLAR,BRACE,AIRCRA
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1730-00-910-0323 Quantity: 5 EA Purchase Request: 7017645937QTY: 5 Delivery: 5 days ADO