This Solicitation opportunity from Department Of Defense was posted on June 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

COLLAR, PIN-RIVET

Closed

SPE4A6-26-T-76B7Federal

Submission Closed06/15/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510

New

DIBBS

Supply of Clamp, Block (NSN: 5342016858223)

POSTED

DEADLINE

Supply of Lock Pins (NSN 5315005970499)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Flat Washers (NSN 5310-00-995-1197)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-26TH

This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 13 turnlock stud assemblies, identified by NSN 5325-00-594-6267. The contract requires a rapid delivery turnaround of 5 days after the order is placed. Performance is centered in Oklahoma City, and the procurement falls under NAICS code 332510. Strict compliance is required regarding cybersecurity and data handling, specifically necessitating CMMC Level 2 certification through a C3PAO and adherence to Covered Defense Information standards. The technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. Additionally, the contractor must follow specific DLA packaging requirements, source approval documentation, and configuration change management protocols for any engineering variances.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-26RJ

This solicitation, issued by the ASC Commodities Division of the Department of Defense, is for the procurement of 45 fastener snap assemblies under NSN 5325-01-191-3418. Each assembly must include one metallic eyelet (MS27980-8B), one cap snap fastener (MS27980-2B), one stud snap fastener (MS27980-7B), and one socket snap fastener (AN227-7B). The delivery requirement is set for 20 days after the order is placed. The contract is fully competitive and adheres to specific military and federal standards, incorporating DLA master lists for technical and quality requirements. Key compliance mandates include DLA packaging requirements, the removal of government identification from non-accepted supplies, and specific physical item marking. While covered defense information may apply, item unique identification is not required by the service customer. Interested parties must respond by September 11, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

PIN, GROOVED, HEADLESS

Solicitation # SPE4A7-26-T-695J

Solicitation SPE4A7-26-T-695J is a fixed-price request for quotations issued by the Department of Defense, specifically DLA Aviation, for the procurement of eight headless grooved pins identified by NSN 5315-01-417-8548. The requirement is managed under NAICS code 332510, with an original required delivery date of May 25, 2027. Delivery is set for FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-2073-1E for packaging data, MIL-STD-129 for marking, and RP001 for DLA packaging requirements. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements under RA001. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Payment processing must be conducted electronically through the Wide Area WorkFlow system.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

WHEEL, SOLID, METALLIC

Solicitation # SPE7LX-26-U-9815

Solicitation SPE7LX-26-U-9815 is a Service-Disabled Veteran-Owned Small Business set-aside issued by the Department of Defense, specifically the DLA Land and Maritime Strategic Acquisition Program Directorate. The requirement is for the procurement of 56 metallic solid wheels, identified by NSN 5340010635825. This is a unilateral Indefinite Delivery Contract with a maximum value of 350,000 dollars, a guaranteed minimum quantity of 8 units, and a minimum delivery order quantity of 14 units. Delivery is expected within 210 days after receipt of the order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to several technical and regulatory standards, including CMMC Level 2 certification and the prohibition of Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with specific attention to special packaging instruction AK10635825. Technical data is subject to ITAR and EAR export controls, requiring approved US/Canada Joint Certification Program certification for access. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Additionally, offerors must comply with the Buy American Act and the Berry Amendment, providing disclosure for any non-domestic materials used.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE7L5-26-T-5309

This contract, identified as SPE7L5-26-T-5309, is a solicitation for the procurement of 322 units of shims, identified by NSN 5365-00-597-5111 and part number 16702313 from Fairbanks Morse, LLC. The order is managed by the Department of Defense Land Supplier Operations Engines, with delivery required within 105 days. The shipment is destined for Arizona Industries for the Blind in Phoenix, Arizona, with a required delivery date of August 14, 2026. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by ISO 9001:2015 standards, and inspection and acceptance will occur at the point of origin. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except for specific functional exceptions. Sampling for quality control must follow MIL-STD-1916 or ASQ H1331 guidelines.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Solicitation # SPE7L5-26-T-5310

This contract is for the procurement of 595 lock pins, identified by NSN 5315012977866 and part number 16101188 from Fairbanks Morse, LLC. The order is managed under purchase request 7015050966 with a delivery requirement of 41 days after order. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, as well as palletization requirements per RP001. A critical environmental restriction is included, prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases approved by NAVSEA. The required delivery date is set for July 3, 2026.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-25XV

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-10U2

Solicitation SPE7L1-26-T-10U2 is a request for quotations issued by the Defense Logistics Agency for the procurement of 46 nonmetallic bumpers, identified by NSN 5340-01-148-8935. This is designated as a critical application item with a non-extendable shelf life of 60 months. The procurement incorporates specific technical and quality requirements, including the prohibition of class I ozone depleting chemicals and adherence to AMS 5513 for metallic components. The required delivery date is February 22, 2027, with a need ship date of January 16, 2027, for delivery to the DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates destination inspection and acceptance, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for hazardous materials and shelf-life marking. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Offerors must submit quotes via the DIBBS system by September 21, 2026.

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-70B4

The contract pertains to the procurement of 108 blind rivets with the NSN 5320-00-113-1665, issued under solicitation number SPE4A6-26-T-70B4 by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on May 25, 2026, with a response deadline of June 2, 2026, and falls under the NAICS code 332722, which corresponds to the manufacture of rivets and similar fasteners. There is no set-aside designation applied to this solicitation, indicating it is open to all eligible contractors without preference for small businesses or other categories. The place of performance and official office address details are not specified, though the contracting entity is based in the United States. Interested parties must submit responses through the DIBBS portal using the provided UI link before the deadline to be considered for award.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 4 days

AI Contract Overview

The contract involves the procurement of 1,094 units of the item Collar, Pin-Rivet, identified by NSN 5320-01-215-7359, under solicitation number SPE4A6-26-T-76B7 issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on June 2, 2026, with a response deadline of June 10, 2026, indicating a competitive bidding process for federal procurement. The item falls under NAICS code 332722, which pertains to the manufacture of rivets and fasteners, confirming the specialized nature of the component. The place of performance and office address details are not specified, but the contracting entity is clearly federal, with no set-aside designation applied, meaning participation is open to all qualified vendors regardless of size or status. Bidders must access the official DIBBS platform via the provided UI link to submit proposals and obtain additional solicitation details.

General Info

Procurement of 1,094 pin-rivet collars by Defense Logistics Agency; solicitation open June 2-10, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-76B7.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedJun 2

Solicitation

Amendment 1Jun 10

Contract was updated

Response DeadlineJun 15

Deadline has passed

Submission Closed

06/15/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressUSA

Contacts

Ahoefa Simons De Fanti

contact@example.gov

+1 (555) 000-0000

Full Description

COLLAR,PIN-RIVET
COLLAR, PIN RIVET
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
HI-SHEAR CORPORATION 73197 P/N HL1087A-8
LISI AEROSPACE CANADA CORP DIV HI L4528 P/N HL1087A-8
WEST COAST AEROSPACE, INC. 60516 P/N HL1087A-8
SPS TECHNOLOGIES, LLC 06725 P/N HL1087A-8
HOWMET GLOBAL FASTENING SYSTEMS INC 92215 P/N HL1087A-8
SPS TECHNOLOGIES, LLC 56878 P/N HL1087A-8
SPE4A6-26-T-76B7
SECTION B
PR: 7017010262 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017010262 0001 EA 1,094.000
NSN/MATERIAL:5320012157359
DELIVERY (IN DAYS):0197
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:025
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:12/25/2026 Original Required Delivery Date:01/26/2027
SPE4A6-26-T-76B7
SECTION B
PR: 7017010262 PRLI: 0001 CONT’D

SPE4A6-26-T-76B7 NSN/Part Number: 5320-01-215-7359 Quantity: 1,094 EA Purchase Request: 7017010262QTY: 1094 Delivery: 197 days ADO