Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

COLLAR, PIN-RIVET

Active
SPE4A6-26-T-10FPFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 323 units of a threaded pin-rivet collar, identified by NSN 5320-00-631-3429, under solicitation SPE4A6-26-T-10FP issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 256 days after award, with the place of performance designated as Hill AFB, Utah, and the response deadline set for August 6, 2026. Technical and quality requirements referenced in the document are governed by the DLA Master List, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements unless superseded by an amendment. The item is subject to stringent quality controls including inspection and acceptance at origin, removal of government identification from non-accepted supplies, and physical identification or bare item marking. While Item Unique Identification is not required per the service customer’s request, export control restrictions apply due to the inclusion of technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, documented training on handling DOD export-controlled data, and explicit DLA authorization. Packaging must adhere to DLA standards, and cybersecurity compliance requires CMMC Level 2 certification for third-party assessors. The contract is classified under NAICS code 332510 and is open to federal procurement with no set-aside designation.

General Info

Procure 323 threaded pin-rivet collars delivered to Hill AFB by August 2026, subject to ITAR/EAR and CMMC Level 2.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
SUSAN BARLOW
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COLLAR,PIN-RIVET
COLLAR,PIN-RIVET,THREADED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5320-00-631-3429 Quantity: 323 EA Purchase Request: 7017673187QTY: 12290 Delivery: 256 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-890Q
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
SEAT, BALL SOCKET
Solicitation # SPE7L1-26-Q-1391
The contract is for the procurement of 124 units of a seat, ball socket with NSN 5340-00-361-3510 under solicitation SPE7L1-26-Q-1391, which is a total small business set-aside as defined by FAR 19.5. The solicitation was posted on July 29, 2026, with responses due by August 14, 2026, and delivery is required within 404 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA requirements, and all government identification must be removed from non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutions must be submitted for approval unless explicitly authorized by the specifications. The item involves technical data subject to export control under ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal DLA authorization. Performance is to be delivered to New Cumberland, Pennsylvania, with the primary point of contact being Brandon Pesicek of the Department of Defense, Land Supply Chain, and the NAICS code is 332510 for forging and stamping.
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A7-26-T-599Q
This contract is for the procurement of 14 units of a PLUG, MACHINE THREAD with NSN/Part Number 5365-01-490-0332, under solicitation SPE4A7-26-T-599Q, with a response deadline of August 6, 2026, and delivery expected 171 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any transfer, including disclosure to foreign persons within or outside the United States, requires prior authorization from the Department of State or Department of Commerce. Technical data associated with this item is governed by DFARS 252.225-7048, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, are permitted access. The placing organization is the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with performance location in New Cumberland, Pennsylvania, and primary point of contact Brandon Smith at brandon.1.smith@dla.mil.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CLIP, RETAINING
Solicitation # SPE7LX-26-U-9075
The contract pertains to the procurement of 12 units of CLIP, RETAINING with NSN 5340-01-692-7326 under solicitation SPE7LX-26-U-9075, which is a Total Small Business Set-Aside as defined by FAR 19.5. The requirement is subject to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance determined by the version in effect on the solicitation issue date or award date depending on acquisition size. Packaging must meet DLA specifications, and any non-accepted supplies must have government identification removed prior to return. The item involves technical data subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior government authorization for any export activity. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and authorized access through the DLA questionnaire may handle this technical data. The delivery schedule requires fulfillment within 116 days after contract award, with performance limited to U.S. locations and no specified city or state for delivery. The solicitation was posted on July 29, 2026, with responses due by August 13, 2026, and falls under NAICS code 332510 for industrial machinery manufacturing. Primary point of contact is Theodore Misiolek, reachable via email and phone provided, under the Department of Defense’s Strategic Acquisition Program Directorate.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
REPAIR KIT, DIVING E
Solicitation # SPE8E6-26-T-3918
This contract pertains to the procurement of 300 units of the Repair Kit, Diving Equipment, identified by NSN 4220-01-732-4215 and part number RG912659 from AQUALUNG USA, INC. The item is classified as a Critical Application Item with a non-extendable shelf life of 240 months, designated as a Type I (Code Z) item, and must be marked accordingly in compliance with MIL-STD-129. Strict material restrictions prohibit the use of asbestos as defined in FED-STD-313 and the intentional addition or direct contact of mercury or mercury-containing compounds, except in specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must include a secondary containment and be shock-proof per NAVSEA 5100-003D. Packaging must meet MIL-STD-2073-1E and be sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, particularly for direct vendor delivery, foreign military sales, and stock shipments. All packaging and marking must adhere to DLA Packaging Requirements and MIL-STD-129, with palletization following RP001 guidelines. Delivery is FOB origin, with inspection and acceptance occurring at destination, and a firm delivery window of 93 days from contract award. The contractual specification incorporates referenced technical and quality requirements from the DLA Master List, and source approval documentation must follow RC001 procedures. The item falls under Federal Supply Class 4220 and is subject to Covered Defense Information protocols. The delivery address is specified as DLA Distribution San Joaquin in Tracy, CA, with John Lieb identified as the primary point of contact.
DLA PACKAGING REQUIREMENTS FOR PROCUREMENT FEDERAL SUPPLY CLASSIFICATIONS

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-888G
The contract is for a single helical compression spring identified by NSN 5360-00-549-3318, with a delivery requirement of 20 days after award. The procurement is issued under solicitation number SPE7L1-26-T-888G, posting on July 29, 2026, with responses due by August 10, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item must comply with DLA packaging requirements and any government identification must be removed from non-accepted supplies. The supplier is HR Textron Inc. Controls Division based in West Hartford, CT, and the contract falls under NAICS code 332510, managed by the Department of Defense through its Land Supply Chain organization. The primary point of contact is Kristina Derry, reachable via phone and email provided, and all documentation is accessible through the DIBBS portal.
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BEARING, PLAIN, SPHERICA
Solicitation # SPE4A6-26-T-10ES
The contract pertains to the procurement of one plain spherical bearing, part number 214-076-104-001 and 214-076-104-1, manufactured by Bell Textron Inc under NSN 3120-01-259-4191, designated as a critical application item. The delivery is mandated within 20 days FOB origin, with no tolerance for quantity variance, and requires full compliance with MIL-STD-2073-1E packaging standards including specific preservation methods, wrapping materials, and packaging levels. Marking must strictly follow MIL-STD-129 without special coding, and palletization must meet DLA packaging requirements. Sampling for quality assurance shall be conducted using MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or corresponding AQLs of 0.1, 1.0, and 4.0. All unspecified attributes are treated as major unless otherwise defined in referenced technical documents. The manufacturer must adhere to DLA’s Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date, depending on acquisition type. The solicitation is issued under contract number SPE4A6-26-T-10ES with a response deadline of August 6, 2026, and requires fulfillment for delivery to the Taiwan Army at Zuoying Ammunition Sub in Kaohsiung City, Taiwan. The contracting officer is Alexis Dunnavant of the DLA Commodities Division. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is mandatory, and documentation for source approval must be submitted per RC001. The bearing must be physically identified as specified in RQ017, and any non-accepted supplies must have government identification removed prior to return. Transportation details reference DLA procedures C19 and C20, with freight forwarding handled via multiple designated carriers. The item is subject to Covered Defense Information requirements, and all technical specifications are governed by DLA’s authoritative sourcing and quality control frameworks.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A0-26-T-4089
The contract specifies the procurement of a PIN, STRAIGHT, HEADED item with NSN 5315-01-537-0276 and quantity of one unit, to be delivered FOB origin within five days of contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revisions controlled by the solicitation issue date or award date depending on acquisition size. The item is classified as a critical application and must conform to specified technical data packages and drawings dated through November 2024. Physical identification is required per RQ017 but item unique identification is waived per DFARS 252.211-7003(c)(1)(i). Quality requirements include non-tailored ISO 9001:2015 compliance alongside tailored higher-level quality provisions, and inspection and acceptance occur at origin. Sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with acceptance criteria of zero non-conformances unless otherwise stated. Packaging must adhere to MIL-STD-129 and ASTM D3951, with palletization following DLA packaging directives. The item must be marked and labeled per contractual specifications, and the sole delivery destination is Storck Barracks Building 6503 in Illesheim, Germany. The certificate of conformance is authorized unless explicitly withheld, and all packaging and marking must reflect the designated unit of issue and quantity per unit pack as defined in the contract. The purchase request number is 7017622999, with an original required delivery date of July 24, 2026, and the solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN, DRIVE, GUIDED
Solicitation # SPE4A0-26-T-4093
The contract issued by the Defense Logistics Agency under solicitation number SPE4A0-26-T-4093 seeks two guided pin and drive units identified by NSN 5315-01-380-5136, with delivery required within five days after delivery order issuance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The supplier must comply with DLA packaging standards and adhere to strict configuration change management protocols, including formal engineering change proposal procedures and variance requests for any deviations. Cybersecurity requirements mandate CMMC Level 2 certification through an approved third-party assessment organization, and all contractors handling technical data must be vetted under the US/Canada Joint Certification Program, trained on proper handling of DOD export-controlled information, and authorized by DLA to access controlled data. The technical data associated with this item is subject to ITAR or EAR export controls, restricting disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Item unique identification is not required per customer request, and government identification must be removed from non-accepted supplies. The place of performance is FPO, ZIP 96675, with Danita Davis as the primary point of contact, and responses are due by August 6, 2026.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A7-26-T-599M
This contract pertains to the procurement of 445 blind rivets identified by NSN 5320-01-192-1492 and part number NAS9308M-4-04, manufactured in accordance with Technical Data Package Revision B General 2, compliant with NAS9308 Revision 5 and reference drawing 13873 011921492-19241. The items must meet all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements. Inspection and acceptance occur at origin, following zero-defect sampling protocols under MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. All items must be physically marked and labeled as required, with government identification removed from non-accepted supplies. Packaging shall be palletized per RP001, and the unit of issue is each, with no variance permitted in quantity. The delivery schedule requires fulfillment within 84 days of award, with delivery scheduled for October 30, 2026, and an original required delivery date of January 1, 2027. The destination is the DLA Distribution San Joaquin warehouse in Tracy, California, with freight and transportation governed by DLA procedural notes C19 and C20. The contract is issued under solicitation SPE4A7-26-T-599M with a total price of $445.00 per unit for the full quantity, and the point of contact is Brad Ingram of the Department of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7L1-26-Q-1397
The contract specifies the procurement of 15 units of strap webbing under NSN 5340-01-253-6814 with a firm fixed price and no variance in quantity. Delivery is required 251 days after the order date, with inspection and acceptance occurring at the destination. All supplies must comply with the DLA Master List of Technical and Quality Requirements, including packaging standards per RP001, quality conformance per RQ006, and removal of government identification from non-accepted items per RQ011. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated, and attributes must be verified against specified levels or AQLs. Marking of the webbing must adhere to MIL-STD-130N, and packaging must conform to MIL-STD-129; if non-hazardous, commercial packaging per ASTM D3951 is allowed only if not superseded by DLA requirements. Hazardous materials must be packaged in accordance with TQ requirement IP025. The item must be palletized per RP001 and shipped to the designated receiving facility in Texarkana, Texas. The contract references technical drawings and specifications available through DIBBS during open solicitation, and unit of issue aligns with DoD and ANSI standards as published by DLA.
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9071
The contract pertains to the procurement of a mounting bracket identified by NSN 5340014817021 and part number BTS/RT35R, with a quantity of 201 units to be delivered FOB origin within 116 days. The acquisition is under DLA Direct, CONUS coverage and is structured as a total small business set-aside under NAICS code 332510. Packaging must comply with DLA’s master requirements, specifically RP001 and SPE7LX-26-U-9071, mandating adherence to MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the item is hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All DLA technical and quality requirements referenced by R or I numbers in the DLA Master List supersede any conflicting commercial standards. The unit of issue is each, with zero variance allowed in quantity, and inspection and acceptance occur at destination. Packaging must be palletized per RP001, and the unit of issue and quantity per unit pack must match contract specifications exactly. Deliveries are subject to government identification removal from non-accepted supplies as per RQ011. The solicitation number is SPE7LX-26-U-9071, issued July 29, 2026, with responses due August 13, 2026, and the point of contact is Theodore Misiolek with the Strategic Acquisition Program Directorate.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 484220
New
DIBBS
Domestic Logistics & Delivery CoordinationThe contract requires coordinated execution of final delivery for cable assemblies to multiple domestic military stock locations, with strict adherence to packaging verification standards and shipping instruction compliance. All activities must ensure that cable assemblies are handled, packaged, and transported according to military requirements to guarantee readiness and operational suitability upon arrival at designated depots across CONUS. The solicitation is a small business set-aside under the SBA program, exclusively open to total small businesses as defined by FAR 19.5, with the NAICS code 484220 classifying it under truck transportation of specialized freight. The contract is managed by the ASC Commodities Division under the Department of Defense and is issued as a subcontract. Proposals must be submitted by the deadline of August 11, 2026, with no specified point of contact or place of performance details provided beyond the domestic scope. All work must align with DLA’s logistical and compliance frameworks to support military supply chain integrity.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541330
New
DIBBS
Supply Chain Compliance & Documentation ManagementThe contract titled Supply Chain Compliance & Documentation Management is a small business set-aside subcontract under the NAICS code 541330, issued by the ASC Commodities Division of the Department of Defense. It requires comprehensive documentation and compliance support specifically tailored to defense supply chain regulations, with a focus on tracking the phase-out of non-compliant materials, maintaining detailed traceability records, and accurately processing shipping instructions. The work is critical to ensuring adherence to federal defense standards and maintaining the integrity of the supply chain from origin to delivery. Response submissions are due by August 11, 2026, with the solicitation posted on July 29, 2026, and full performance will be conducted within the Department of Defense’s operational framework. Only small businesses qualified under the SBA’s Total Small Business Set-Aside provisions are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense-related contracts.
Engineering Services

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
Special-Purpose Electrical Cable Assembly ManufacturingThe contract calls for the manufacture and delivery of 300 units of a special-purpose electrical cable assembly identified by NSN 6150-01-347-8428, with strict adherence to International Traffic in Arms Regulations and Export Administration Regulations, requiring full compliance with ITAR and EAR requirements. Every unit must include comprehensive traceability throughout the production process and meet all mandated packaging standards to ensure secure handling and transport. The solicitation is structured as a subcontract with a total small business set-aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5. It falls under NAICS code 335931 for Other Electrical Equipment and Component Manufacturing and is issued by the ASC Commodities Division under the Department of Defense. Responses are due by August 11, 2026, with the opportunity posted on July 29, 2026, and all work must be performed in accordance with defense-grade protocols for quality, security, and documentation.
Current-Carrying Wiring Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541618
New
DIBBS
Supply Chain Documentation & Traceability ManagementThe contract requires the creation and ongoing maintenance of comprehensive traceability documentation for all manufactured items, ensuring full accountability from raw material sourcing through production to final inspection. This includes securing and organizing material certifications, detailed process records, and inspection data to meet rigorous audit and government inspection requirements at the origin point. The documentation must be accurate, complete, and readily accessible to support compliance with defense standards and regulatory obligations. This subcontract, issued under the Department of Defense’s ASC Commodities Division, falls under NAICS code 541618 and is focused on supply chain documentation and traceability management. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026. Performance is expected to occur at the contractor’s facility or designated manufacturing site, though specific location details are not provided. There is no set-aside classification indicated, and the work is critical to maintaining defense supply chain integrity through transparent, auditable records.
Other Management Consulting Services

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC Level 2 ImplementationThe contract requires the implementation and ongoing maintenance of CMMC Level 2 compliance across all IT systems involved in manufacturing, documentation, and shipment processes, ensuring alignment with NIST SP 800-171 security controls. This includes establishing, documenting, and enforcing policies and procedures to protect controlled unclassified information, conducting regular assessments to validate control effectiveness, and maintaining readiness for third-party CMMC audits. The scope also mandates immediate cyber incident reporting in accordance with federal requirements, with defined workflows for detection, response, containment, and reporting to appropriate authorities. The contract is structured as a subcontract under the Department of Defense’s ASC Commodities Division and is linked to NAICS code 541512, indicating a focus on computer systems design services. It was posted on July 29, 2026, with a response deadline of August 11, 2026, and the place of performance is unspecified but tied to operational systems supporting manufacturing and logistics functions. Compliance is not a one-time effort but requires continuous monitoring, documentation updates, personnel training, and adaptation to evolving threats or regulatory changes to sustain CMMC Level 2 certification throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling, and Hazard Communication ComplianceThe contract requires the packaging of finished cable assemblies in strict accordance with MIL-STD-129, ensuring all assemblies are properly labeled, marked, and documented for military logistics and shipment. This includes the accurate application of hazard warning labels on all packages containing hazardous materials, with full compliance to the OSHA Hazard Communication Standard to ensure safety and regulatory adherence throughout handling and transport. The work is classified as a subcontract under NAICS code 561910, indicating it falls within support activities for truck transportation, though the nature of the work is focused on military-grade packaging and hazard labeling rather than transportation services. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the ASC Commodities Division within the Department of Defense, with performance expected to align with federal defense supply chain requirements.
Packaging and Labeling Services

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 423690
New
DIBBS
Source-Controlled Component SupplyThe contract entails the supply of source-approved electrical components specifically designated for use in the fabrication of cable assemblies, requiring full traceability from manufacturer to final assembly and comprehensive documentation to ensure compliance with all technical and regulatory standards. All components must meet stringent source control requirements, with proven adherence to DFARS data rights and limited rights clauses, ensuring that intellectual property and technical data are handled in accordance with federal defense contracting mandates. The supplier is responsible for maintaining rigorous quality control and documentation protocols to support audit readiness and mission-critical performance. This subcontract is issued under the NAICS code 423690 and is administered by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 29, 2026, with bids due by August 11, 2026, and performance is expected to support defense-related infrastructure, though the exact place of performance is not specified. While no set-aside status is indicated, the contract mandates full compliance with federal sourcing and data handling regulations, making it suitable only for vendors with proven experience in supplying controlled electronic components to U.S. defense programs.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
Power Cable Assembly ManufacturingThe contract calls for the manufacture of branched electrical power cable assemblies designated as RP001, strictly in accordance with specified contractual drawings. This includes end-to-end execution of component sourcing, precise assembly, rigorous testing to ensure performance and reliability, proper labeling, and secure packaging required for government delivery. All work must comply with technical and quality standards as outlined in the provided documentation, with full accountability for sourcing approved materials and maintaining traceability throughout the production process. The deliverables are intended for final use by a U.S. Department of Defense entity under the ASC Commodities Division. This is a subcontract opportunity under NAICS code 335931, with a response deadline of August 11, 2026, and a posting date of July 29, 2026. There is no set-aside designation or specific geographic performance location specified, but the final products must meet federal procurement requirements for military applications. All production, testing, and delivery activities are expected to be completed in alignment with defense logistics standards, ensuring readiness for direct government use. Potential respondents must be prepared to demonstrate capability in high-reliability electrical assembly and compliance with defense contract obligations.
Current-Carrying Wiring Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and Controlled Unclassified Information (CUI) SafeguardingThe contract requires the implementation of NIST SP 800-171 safeguards to protect Covered Defense Information, encompassing the development of a comprehensive System Security Plan, enforcement of strict access controls, and establishment of protocols for timely incident reporting. All security requirements must be fully aligned with federal standards for safeguarding Controlled Unclassified Information, ensuring that systems and processes are configured to mitigate risks associated with unauthorized access, disclosure, or compromise. The scope includes not only the primary contractor’s environment but also mandates the flow-down of these cybersecurity obligations to all subcontractors, requiring consistent compliance across the entire supply chain. This subcontract, issued by the Department of Defense’s ASC Commodities Division under NAICS code 541512, is focused on cybersecurity services for defense-related information systems. The response deadline is August 12, 2026, with the solicitation posted on July 29, 2026, indicating a compressed timeline for qualification and proposal submission. Performance is expected to support DoD missions where the protection of sensitive data is critical, and all parties must demonstrate proven capability in implementing and maintaining NIST 800-171 controls without exception. Failure to meet these requirements may result in noncompliance penalties or termination of contractual obligations.
Computer Systems Design Services

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Compliance and Origin DocumentationThe contract requires the preparation and submission of documentation to verify the domestic origin of bearing components in full compliance with DFARS 252.225-7016, which mandates strict adherence to the Buy American Act and related trade regulations. This includes providing detailed cost breakdowns, official supplier declarations affirming the origin of each component, and complete traceability records that link raw materials and manufacturing processes back to U.S.-based sources. All submitted materials must clearly demonstrate that every bearing component is mined, produced, manufactured, or substantially transformed within the United States, with no reliance on foreign-sourced inputs that would jeopardize compliance. The solicitation is issued under the NAICS code 541611 for management, scientific, and technical consulting services, and is categorized as a subcontract under the Department of Defense’s ASC Commodities Division. Respondents must meet the August 12, 2026 deadline for submission, with documentation needing to be thoroughly organized and auditable to support government verification efforts. While the place of performance and point of contact details are unspecified, the requirement applies to all entities involved in supplying bearing components and their associated supply chain partners. Failure to provide accurate, complete, and verifiable documentation will result in noncompliance and potential disqualification from contract award.
Administrative Management and General Management Consulting Services

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 561910
New
DIBBS
Defense-Compliant Packaging, Preservation, and Labeling ServicesThe contract requires the provision of defense-compliant packaging, preservation, and labeling services for critical bearings used in military applications, adhering strictly to MIL-STD-129 for labeling, MIL-STD-2073-1E for preservation standards, and RP001 for palletization. All deliverables must ensure full traceability and seamless integration with the prime contractor’s existing traceability systems, which demands precise documentation and rigorous quality control throughout the process. The services are essential to maintaining operational readiness and compliance with Department of Defense supply chain requirements. This subcontract, issued by the ASC Commodities Division under the Department of Defense, targets vendors capable of handling high-stakes defense components with exacting military specifications. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 561910 for other support activities for transportation. Performance is expected to align with government logistics networks, and while specific location details are not provided, the work must support the broader defense supply chain infrastructure. Vendors must demonstrate proven experience in military packaging standards and the technical capability to interface securely and accurately with established traceability platforms.
Packaging and Labeling Services

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332991
New
DIBBS
Cylindrical Roller Bearing Manufacturing and SupplyThe contract requires the manufacture and delivery of 200 cylindrical roller bearings meeting strict military specifications, with all production activities limited to the United States, its outlying areas, or Canada. At least 50 percent of the total component cost must originate from these regions to satisfy domestic content compliance requirements. Full documentation and successful completion of First Article Testing are mandatory to verify conformance to performance, dimensional, and quality standards before量产. The work is classified as a subcontract under NAICS code 332991, and the solicitation is managed by the ASC Commodities Division within the Department of Defense. Responses must be submitted by August 12, 2026, with the contract opportunity posted on July 29, 2026, and all deliverables must be performed in accordance with defense procurement protocols to ensure reliability and traceability for military use.
Ball and Roller Bearing Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details