Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

COLLAR, SHAFT

Active
SPE7L1-26-T-890JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one collar, shaft with NSN 5340-01-714-8889 under solicitation SPE7L1-26-T-890J, with a required delivery within 20 days after order. Full and open competition applies, and the item is classified under NAICS code 332510. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The product must not contain any Class I ozone-depleting chemicals, and any proposed substitutes must be submitted for approval unless explicitly authorized by the specification. The contractor must comply with DLA packaging standards and remove government identification from non-accepted supplies. Cybersecurity compliance mandates either a self-assessment or certification by a CMMC Level 2 accredited third-party assessor. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting access to foreign persons and requiring compliance with DFARS 252.225-7048; only contractors with approved JCP certification, completed DLA training on export-controlled data, and formal approval may access such data. Any configuration changes necessitate a formal engineering change proposal. The point of contact is Christine Davis at the Department of Defense, Land Supply Chain, with responses due by August 10, 2026, and performance location in Mechanicsburg, PA, 17050-2411.

General Info

Procure one collar shaft NSN 5340-01-714-8889, deliver in 20 days, comply with DLA, CMMC Level 2, ITAR/EAR, and JCP requirements.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

5450 CARLISLE PK BLDG 209N, MECHANICSBURG, PA, 17050-2411, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Christine Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COLLAR,SHAFT
COLLAR,SHAFT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
FULL AND OPEN COMPETITION APPLY
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data
SPE7L1-26-T-890J
SECTION B
Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5340-01-714-8889 Quantity: 1 EA Purchase Request: 7017127152QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
MOUNT, RESILIENT, WEA
Solicitation # SPE4A7-26-T-600E
The contract pertains to the procurement of a resilient weapon mount, identified by part number 26001578-101 and NSN 5342017278571, with a total quantity of ten units to be delivered under solicitation SPE4A7-26-T-600E. Delivery is required within 114 days from the contract award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and all items must comply with stringent quality standards including MIL-STD-1916 or ASQ H1331 for sampling, with critical attributes held to a zero-defect acceptance criterion unless otherwise stipulated. The product must adhere to DLA packaging requirements per RP001 and marking standards per MIL-STD-129, with no special marking required. Packaging must conform to MIL-STD-2073-1E, using prescribed methods for protection, wrapping, and containment, and palletization must meet DLA guidelines. The item is classified as a critical application component under The Boeing Company’s specifications and is subject to cybersecurity compliance under CMMC Level 2 self-assessment, along with documentation mandates for source approval and removal of government identification from non-accepted items. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with shipping details governed by DLAD procedural notes C19 and C20. The contract was posted on July 29, 2026, with responses due by August 6, 2026, and the original required delivery date is set for May 5, 2027, while the needed ship date is November 29, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List, and the procurement falls under NAICS code 332510, managed by the Department of Defense’s ASC Supplier Operations division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-888P
The contract involves the procurement of 34 CLAMP, LOOP items under solicitation SPE7L1-26-T-888P, with a response deadline of August 10, 2026, and a required delivery within 20 days of award. The item is identified by NSN 5340-01-327-5961 and must comply with MIL-STD-130N, dated November 16, 2012, for proper identification marking of U.S. military property. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA eProcurement website, with the controlling revision depending on whether the acquisition is simplified or large-scale, based on the solicitation or award date. The supplier, J and M Products Inc., located in Burbank and Hawthorne, California, must ensure all non-accepted supplies have government identification removed in accordance with RQ011. The contract is managed by the Department of Defense’s Land Supply Chain, with the place of performance listed as APO 96368-5136, and primary point of contact is Kristina Derry, reachable via email and phone. The NAICS code is 332510, indicating classification under Fabricated Metal Product Manufacturing.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BAND, RETAINING
Solicitation # SPE7L1-26-T-890M
The contract pertains to the procurement of 300 retaining bands with NSN 5340-01-070-4996 under solicitation SPE7L1-26-T-890M, a total small business set-aside with a NAICS code of 332510, administered by the Department of Defense through the Land Supply Chain office. Delivery is due within 266 days after award, and performance is required at Robins AFB, Georgia. The contractor must prepare a Production Lot Test Report, clearly labeled with the contract and lot numbers, and present it to the Quality Assurance Representative for review. All shipments of these reports must include signed DD Form 1222 and DD Form 250/iRAPT receiving documents, a copy of the contract, all applicable test reports with actual results and tolerances, material and process certifications, process operations and inspection method sheets, and manufacturing drawings marked to limit public disclosure and restrict government use as necessary. The solicitation was posted July 29, 2026, with responses due by August 10, 2026, and primary point of contact is Isabelle Szulewski at DLA.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
RETAINER, NUT AND BOLT
Solicitation # SPE7L1-26-T-890A
This contract pertains to the procurement of 22 units of a retainer, nut, and bolt assembly identified by NSN 5340-01-684-8348 under solicitation SPE7L1-26-T-890A. Delivery is required within 73 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. Strict packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129 must be followed, with no special marking codes applied. The item must be packed in compliance with DLA’s packaging guidelines, using a Unit of Issue of EA, with zero tolerance for quantity variance. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional incorporation of mercury or mercury-containing compounds, except for specific functional applications like batteries, fluorescent lights, or specialized instrument components as defined by NAVSEA. Mercury-containing portable devices must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. All supplies must comply with documentation, reporting, and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The contract is bound by federal acquisition rules, and all communications and logistics must conform to DLA procedures, including transportation directives C19 and C20. The point of contact for inquiries is Brandon Pesicek, and the required delivery date is November 20, 2025, with a need ship date of November 4, 2025.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN, COTTER
Solicitation # SPE4A6-26-T-10FE
The contract solicits 1,227 cotter pins with NSN 5315-00-185-0037 under solicitation number SPE4A6-26-T-10FE, with a response deadline of August 6, 2026, and a delivery requirement of 113 days after award. The item is procured as fully competitive under a military specification and is subject to the DLA Master List of Technical and Quality Requirements, which governs all referenced technical and quality standards identified by R or I numbers. Critical item source inspection is mandatory, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with zero non-conformances required unless otherwise specified. Attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively; unspecified attributes default to major. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, certain instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment boundary meeting NAVSEA 5100-003D. The place of performance is Robins Air Force Base, Georgia, and the contracting office is the ASC Commodities Division under the Department of Defense, with Paul Askew as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, WIRE ROPE,
Solicitation # SPE4A5-26-T-312X
This contract is for the procurement of four wire rope couplings, identified by NSN 4030-01-654-3836 and part numbers 234-517-9242 and NM135055-0450, supplied by Honeywell International Inc. and Eaton Aeroquip LLC under solicitation SPE4A5-26-T-312X. The item is designated as a critical application component requiring strict compliance with Federal Aviation Administration airworthiness standards, FAA bare item marking requirements, and DLA packaging and preservation regulations per MIL-STD-2073-1E and MIL-STD-129. Supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Note C03, and cybersecurity compliance is mandated at CMMC Level 2 via self-assessment. Quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required in sampling unless otherwise specified, and critical, major, and minor attributes are verified at levels VII, IV, and II respectively. Delivery is FOB origin with inspection and acceptance occurring at the destination, with a required delivery date of July 17, 2026, and a 101-day lead time. Packaging must adhere to DLA packaging requirements, palletization standards, and special marking codes, with no special markings required. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with no quantity variance permitted.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-10GC
The contract pertains to the procurement of PIN-RIVET items with the NSN 5320-00-971-9153, requiring a total quantity of 178 units to be delivered within 42 days of contract award. All items must comply with stringent sampling requirements mandating adherence to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances accepted unless otherwise stated, and critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Packaging must conform to ASTM D3951 unless overridden by DLA Master List requirements, with all packaging and labeling strictly following MIL-STD-129, including palletization per RP001. Items must be marked with government identification as specified, and any non-accepted supplies must have government identifiers removed. The delivery is FOB origin, inspection and acceptance occur at destination, with no variance allowed in quantity. The specified shipping address is the DLA Distribution San Joaquin facility in Tracy, CA, and transportation follows DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE4A6-26-T-10GC with a required delivery date of April 25, 2026, and unit price of $178.00 per EA for a total contract value of $31,684. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by solicitation or amendment dates.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CLIP, SPRING TENSION
Solicitation # SPE7L1-26-T-890C
Offerors must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with thresholds lowered to $150,000, and must disclose any non-domestic materials in their quotations. The solicitation prohibits the use of covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and no items produced via additive manufacturing may be submitted unless prior approval is granted. Quotations must include quantity ranges due to fluctuating demand, as manual evaluation allows for flexible requirement aggregation or reduction without resolicitation, though this does not apply to Auto IDC. Small business joint ventures must submit specific certifications under FAR provisions for eligibility categories. All vendors must register through the upcoming AMPS system to access the Vendor Shipment Module and maintain shipping capability, with WebServices users required to update their schema by specified deadlines. Offerors anticipating submission after the closing date must file a “No Bid” on DIBBS with an anticipated quote date or reason to avoid unnecessary follow-ups. Fast Pay is not applicable to this solicitation. The item in question is a spring tension clip with NSN 5340-01-192-2048, quantity 15 units, requiring delivery within 57 days to Tinker AFB, with Robert Warne as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A6-26-T-10GR
The contract solicitation SPE4A6-26-T-10GR requires four straight headless pins with NSN 5315-01-400-3809 for delivery within 128 days to Tracy, CA, under the Department of Defense’s Defense Logistics Agency. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment supersedes it. The items must comply with stringent packaging, marking, and identification standards including the removal of government identification from non-accepted supplies and bare item marking per RQ017. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated, and attributes are assigned verification levels or AQLs based on classification, with unspecified attributes treated as major. Configuration changes require formal engineering change proposals or variance requests, and manufacturers must submit source approval documentation per RC001. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Only contractors with approved US/Canada Joint Certification Program status, completion of DOD export-controlled data training, and DLA authorization may access the technical data. Cybersecurity requirements mandate CMMC Level 2 compliance through either a self-assessment or third-party assessment by a certified C3PAO, and covered defense information handling is mandatory. All documentation, inspection, and acceptance activities must occur at the manufacturer’s facility per RQ009, and the procurement falls under NAICS 332510 for metal stamping and forging. Primary point of contact is Christopher Montgomery of the ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
DISK, SOLID, PLAIN
Solicitation # SPE7L1-26-T-890T
The contract is for the procurement of 4,728 solid plain disks with NSN 5340-01-229-3826 under solicitation SPE7L1-26-T-890T, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within 182 days after contract award, with responses due by August 10, 2026. The item falls under NAICS code 332510 and is subject to DLA packaging and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. The supply must comply with strict prohibitions against intentional addition or direct contact of mercury or mercury-containing compounds, except for specific functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Additionally, the technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors with valid US/Canada Joint Certification Program certification, completed DOD export training, approved DLA questionnaire responses, and formal DLA authorization. The place of performance is New Cumberland, Pennsylvania, with Brandon Pesicek as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
LEVER, MANUAL CONTRO
Solicitation # SPE7L1-26-T-888R
This contract pertains to the procurement of one manual control lever, identified by NSN 5340-01-082-4079 and part number 142D5220, under solicitation SPE7L1-26-T-888R. The item must be delivered within 20 days to the destination specified as APO AP 96264-2025, with FOB destination terms, zero tolerance for quantity variance, and final inspection and acceptance occurring at the delivery point. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, using approved materials and procedures, and no special marking is required. The contract strictly prohibits the use or incorporation of Class I ozone-depleting chemicals, superseding any conflicting specification requirements, and requires prior approval for any substitute chemicals. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to Covered Defense Information provisions and must adhere to DLA packaging and transportation guidelines, including references to DLAD Proc Notes C19 and C20 for shipping logistics. The supply is designated for the Department of Defense through the Land Supply Chain, with delivery directed to Kunsan Air Base in South Korea for receipt, and the contracting officer is Kristina Derry. The unit of issue is each (EA), with a total price based on a unit price of one dollar. The procurement falls under NAICS code 332510 and is classified as a federal solicitation with no set-aside designation. The response deadline is August 10, 2026, and the original required delivery date is July 27, 2026. Government-specific identifiers and distribution codes are provided for internal tracking, and all submissions must conform to the DoD unit of issue standards as outlined in the official DLA reference. The contract mandates strict adherence to technical compliance, environmental restrictions, and logistics protocols throughout the fulfillment process.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PLUNGER, QUICK RELEA
Solicitation # SPE7L1-26-T-889F
The contract solicitation pertains to the procurement of 28 units of a PLUNGER, QUICK RELEA with NSN 5340-00-565-3198 under solicitation number SPE7L1-26-T-889F. The item is subject to strict export control regulations due to the presence of technical data governed by either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any export or disclosure to foreign persons, including foreign nationals within the United States. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD training on handling export-controlled technical data and have been formally approved by the Defense Logistics Agency. The delivery timeline is set for 20 days after award, and the solicitation, issued by the Department of Defense’s Land Supply Chain under NAICS code 332510, has a response deadline of August 10, 2026. Only vendors meeting all specified compliance and certification criteria may submit proposals, with point of contact Kristina Derry available for inquiries via provided email and phone.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CUI SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 Revision 2 controls to safeguard Controlled Unclassified Information within the contractor’s systems and environments. This includes establishing technical, administrative, and physical safeguards to ensure the confidentiality, integrity, and availability of CUI in alignment with federal cybersecurity standards. The contractor must also comply with incident reporting requirements mandated by DFARS 252.204-7012, ensuring timely notification and remediation of any cybersecurity events affecting CUI. All activities must be performed under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, and the work is classified under NAICS code 541512 for Computer Systems Design Services. The contract is structured as a subcontract and is associated with the Department of Defense’s Land Supply Chain organization. Responses must be submitted by the deadline of August 28, 2026, with the expectation that performance will occur within the defense supply chain environment.
Computer Systems Design Services

POSTED

about 19 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and Testing ServicesThe contract requires independent inspection and testing of heater assemblies and components to ensure full compliance with specified technical drawings, MIL-STD-1916 standards, and a zero non-conformance mandate. All work must be performed with rigorous attention to quality control, ensuring that every part meets exacting military specifications without deviation. The services are critical to maintaining the integrity and reliability of defense-related heating systems. This is a total small business set-aside subcontract under NAICS code 541380, exclusively available to small business concerns as defined by the SBA. The solicitation was posted on July 29, 2026, with a response deadline of August 28, 2026. The contracting activity stems from the Department of Defense through the Land Supply Chain office, and performance is expected to support U.S. military operations. All proposals must demonstrate proven capability to deliver defect-free inspection and testing outcomes in alignment with stringent defense quality requirements.
Testing Laboratories and Services

POSTED

about 19 hours ago

DEADLINE

in 29 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Preservation, and Corrosion ControlThe contract requires comprehensive military-compliant packaging, corrosion prevention, and moisture control measures for a heater parts kit, ensuring all components are protected during storage and transit under demanding operational conditions. All packaging must meet strict defense standards with proper labeling and full documentation to guarantee traceability, readiness, and compliance with military logistics protocols. The scope encompasses every step from initial preservation techniques to final packaging and recordkeeping, with an emphasis on long-term durability and environmental resilience. This is a total small business set-aside subcontract under NAICS code 561910, issued by the Department of Defense’s Land Supply Chain, and is open for response until August 28, 2026. The solicitation is exclusively available to small businesses as defined by the Small Business Administration, and the place of performance and exact delivery location are not specified in the provided details. All work must align with federal acquisition regulations and military-grade specifications, with no flexibility in adherence to preservation and packaging standards.
Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

in 29 days
View Details
NAICS: 335999
New
DIBBS
Component Supply for Heater AssemblyThe contract seeks the supply of critical components including heating elements, thermostats, housings, and electrical connectors specifically designed to meet military specifications and stringent quality standards for integration into heater assemblies. All materials must adhere to defined technical requirements and undergo rigorous testing to ensure reliability under demanding operational conditions. The procurement is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 335999 designating it under Other Electrical Equipment and Component Manufacturing. The solicitation was posted on July 29, 2026, and responses are due by August 28, 2026, with performance expected to support the Department of Defense’s Land Supply Chain through undisclosed but mission-critical locations. Compliance with federal acquisition regulations and defense-specific quality protocols is mandatory, and all suppliers must be certified to handle sensitive military-grade components under controlled manufacturing practices.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 29 days
View Details
NAICS: 333414
New
DIBBS
Manufacture of Vehicular Compartment Heater Parts KitThe contract requires full manufacturing, assembly, testing, and packaging of the vehicular compartment heater parts kit designated by NSN 2540-01-096-5023, strictly in accordance with military specifications and source control drawings. All work must be performed to meet rigorous defense standards, ensuring the component’s reliability and performance under operational conditions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing the Department of Defense’s commitment to supporting small business participation in defense supply chains. The project falls under NAICS code 333414, which classifies it within the heating equipment manufacturing sector, and is managed by the Land Supply Chain division of the Department of Defense. The opportunity was posted on July 29, 2026, with a response deadline of August 28, 2026, providing potential bidders a four-week window to prepare and submit proposals. The place of performance and point of contact details are not specified, but the primary location of work is expected to align with the contractor’s facility capable of meeting military-grade production requirements. All submissions must be made through the official DIBBS platform, and compliance with all technical, quality, and regulatory standards is mandatory for award consideration.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 29 days
View Details
NAICS: 333999
New
DIBBS
Small Business Subcontracting Participation (Socioeconomic Support)Small businesses are invited to participate in subcontracting opportunities to support a prime contractor’s socioeconomic evaluation score under a Department of Defense solicitation tied to NAICS code 333999. This subcontracting initiative is designed to enhance the prime contractor’s standing in federal socioeconomic assessments by integrating qualified small businesses into the supply chain, though no specific set-aside designation is applied. The opportunity was posted on July 29, 2026, with responses required by August 27, 2026, and is managed by the Land Supply Chain organization under the Office of the Secretary of Defense. While no place of performance or point of contact details are specified, interested small businesses must engage directly through the provided DIBBS portal to pursue participation and align with the prime contractor’s subcontracting goals. The effort does not involve a formal contract award but rather enables small firms to contribute to a larger bid’s compliance and competitiveness through verified subcontracting commitments.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 28 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Domestic Freight Shipping (FOB Origin)The contract pertains to the arrangement and execution of domestic freight shipping services from various points of origin within the United States to DLA Distribution New Cumberland, Pennsylvania, under FOB origin terms, meaning the responsibility for the shipment transfers to the buyer upon delivery to the carrier at the origin. This is a subcontract solicitation under the NAICS code 484220, which categorizes it within the truck transportation sector, specifically for general freight and local hauling. The opportunity is posted by the Department of Defense through its Land Supply Chain office, indicating that the work supports military logistics and supply chain operations. The response deadline is set for August 27, 2026, and the solicitation is available via a public portal for interested parties to review and submit proposals. There is no specific set-aside designation listed, suggesting the contract is open to all qualified contractors, regardless of business size or certification status. Performance is required solely within the U.S., with the final destination fixed at New Cumberland, PA, and no additional point of contact details are provided in the posting.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 19 hours ago

DEADLINE

in 28 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation, and Marking ServicesThe contract requires the provision of packaging, preservation, and marking services for cylinder assemblies in full compliance with DLA RP001, MIL-STD-2073-1E, and MIL-STD-129 standards, ensuring all components meet rigorous military specification for handling, storage, and transportation. All work must adhere strictly to these technical guidelines to guarantee the integrity and traceability of the assemblies throughout the supply chain, with particular attention to labeling, protective materials, environmental preservation, and unit identification. This is a subcontract opportunity issued by the Department of Defense under the LAND SUPPLY CHAIN organization, with a solicitation posted on July 29, 2026, and a mandatory response deadline of August 27, 2026. The North American Industry Classification System code 493190 indicates the focus on warehousing and storage services, though the specific scope centers on specialized military packaging activities. The place of performance and point of contact details are unspecified, but the contract is accessible via the DIBBS platform for interested parties to review full requirements and submit proposals.
Other Warehousing and Storage

POSTED

about 19 hours ago

DEADLINE

in 28 days
View Details
NAICS: 333999
New
DIBBS
Supply of Cylinder Assembly, Actuating, Linear (NSN 3040-01-642-5340)The contract seeks the procurement and delivery of 154 new, unused Cylinder Assembly, Actuating, Linear units identified by NSN 3040-01-642-5340, with the potential to expand to a maximum of 308 units if required. All units must fully comply with military specifications and meet stringent packaging standards to ensure readiness for deployment. The solicitation is issued under the NAICS code 333999 and is structured as a subcontract within the Department of Defense’s Land Supply Chain. Responses are due by August 27, 2026, with the opportunity formally posted on July 29, 2026. The place of performance and specific delivery location are not detailed in the available data, and no set-aside provisions or small business preferences are indicated. The contract is administered by the Department of Defense through its DLA DIBBS portal, with no direct point of contact listed for inquiries.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332722
New
DIBBS
LEVER, LOCK-RELEASE
Solicitation # SPE7L1-26-T-889P
This contract pertains to the procurement of a lever, lock-release with part number 157D3900 and NSN 5340015582782, for a quantity of four units at a unit price of $4.00, totaling $16.00. Delivery is required within five days of contract award, with shipment to be made FOB origin and no variance permitted in quantity. Inspection and acceptance occur at the origin point, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and codes as outlined in DLA requirements. The item must not contain intentional additions of mercury or come into direct contact with mercury compounds, except for approved functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable items containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The contractor is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and must adhere to DLA packaging and hazardous materials shipping guidelines. Final delivery is directed to a postal address in Bogotá, Colombia, with specific transportation protocols referenced in DLAD procedural notes. The contract was issued under solicitation SPE7L1-26-T-889P, with a response deadline of August 10, 2026, and an original required delivery date of August 3, 2026. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition type.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
SPROCKET, AMMUNITION
Solicitation # SPE7L1-26-T-889H
The contract pertains to the procurement of 25 units of sprocket ammunition, identified by NSN 1005-01-559-3126 and part number 157D3853, under solicitation SPE7L1-26-T-889H. Delivery is required within five days of award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the origin point, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 without special markings. The item is subject to demilitarization guidelines for Category I munitions and must adhere to cybersecurity requirements under CMMC Level 2 Self-Assessment. The contract also applies covered defense information protocols, and all technical and quality requirements are sourced from the DLA Master List, with revisions controlled by the solicitation issue or award date. The designated delivery location is in Bogotá, Colombia, with specific transportation and customs procedures outlined for freight and parcel post. This is a total small business set-aside under NAICS code 332994, with a response deadline of August 10, 2026, and an original required delivery date of August 3, 2026. The point of contact is Deborah Ferrin, and the contracting activity is under the Department of Defense's Land Supply Chain.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
GEAR, SPUR
Solicitation # SPE7L1-26-T-889Q
The contract pertains to the procurement of a spur gear identified by NSN 3020-01-558-2772 and part number 157D3839, with a quantity of 13 units to be delivered within five days of contract award under solicitation SPE7L1-26-T-889Q. Delivery is FOB origin, with no tolerance for variance in quantity, and both inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, container types, and packing levels, while labeling follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and the shipment is addressed to a customs deposit facility in Bogotá, Colombia, with transportation governed by DLA procedural notes C19 and C20. The item is subject to DLA’s Master List of Technical and Quality Requirements, and the supplier must perform a CMMC Level 2 self-assessment to verify cybersecurity readiness. The acquisition is a total small business set-aside under NAICS code 333612, with a contract value of $169.00 at $13.00 per unit, and the required delivery date is August 3, 2026. The contract is managed by the Department of Defense’s Land Supply Chain under the supervision of Kristina Derry, with full compliance enforced through government oversight codes and tracking identifiers.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details