Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

COLORIMETER, PHOTOELECT

Active
SPE2DS-26-T-453WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE2DS-26-T-453W is a request for quotations issued by DLA Troop Support, Medical Supply Chain MD SURG FSF, for the acquisition of one photoelectric colorimeter, specifically the DR 900 model (NSN 6630016230976). The procurement is categorized under NAICS code 334519. The required delivery date is September 21, 2026, with a delivery lead time of 20 days after order. Shipping is designated as FOB Destination to the 325th MDG SGSL at Tyndall AFB, Florida, and must be conducted via traceable means. The contract mandates strict adherence to Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial, utilizing sealed unit containers and exterior shipping containers in accordance with MIL-STD-2073-1E and DLA packaging requirement RP001. The item is not regulated by the FDA, and the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware. Inspection and acceptance will occur at the destination. Payment processing is required through the Wide Area WorkFlow system. The solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information and compliance with the Buy American Act and Berry Amendment.

General Info

DLA Troop Support seeks one DR 900 photoelectric colorimeter for delivery by September 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

340 MAGNOLIA CIR, TYNDALL AFB, FL, 32403-5604, USA

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-453W Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUSA
Contacts
Olusola Emmanuel
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COLORIMETER,PHOTOELECTRIC
COLORIMETER,PHOTOELECTRIC
COLORIMETER PHOTOELECTRIC DR 900.
UNIT OF ISSUE EACH (EA)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THIS ITEM IS NOT REGULATED BY THE FDA.
SHALL BE MARKED IAW THE LATEST EDITION
OF THE MEDICAL MARKING STANDARD NO. 1
https://www.dla.mil/Logistics-Operations/Packaging/
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
HACH COMPANY 91224 P/N 9385100
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018388001 0001 EA 1.000
SPE2DS-26-T-453W
SECTION B
PR: 7018388001 PRLI: 0001 CONT’D
NSN/MATERIAL:6630016230976
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
PARCEL POST ADDRESS:
HT1158
325TH MDG SGSL PB
CP 850 283 7143
340 MAGNOLIA CIR
TYNDALL AFB FL 32403-5604
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
SPE2DS-26-T-453W
SECTION B
PR: 7018388001 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
HT1158
325TH MDG SGSL PB
CP 850 283 7143
340 MAGNOLIA CIR
TYNDALL AFB FL 32403-5604
US
M/F: (TCN) HT115862594247
RDD:
PROJ: TP 3
SUPP ADD: HT1156 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A0A DIST: ADV: 2A FC: J6
Need Ship Date:00/00/0000 Original Required Delivery Date:09/21/2026
SPE2DS-26-T-453W NSN/Part Number: 6630-01-623-0976 Quantity: 1 EA Purchase Request: 7018388001QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334519
New
DIBBS
GAGE, DIFFERENTIAL, DIAL
Solicitation # SPE4A6-26-T-35BJ
This contract is for the procurement of five dial indicating differential gages, identified by NSN 6685-01-134-8185 and part number 19NCXXX0X15E1BXAXX03. The order is issued by the Department of Defense ASC Commodities Division under solicitation SPE4A6-26-T-35BJ as a total small business set-aside. Delivery is required within 171 days, with a need date of March 21, 2027, and shipment is designated FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging, marking, and quality requirements, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. All items are classified as critical application items and must be marked as delicate instruments.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIAL IND
Solicitation # SPE4A5-26-T-465G
This contract is for the procurement of 42 dial indicating pressure gages, identified by NSN 6685-01-058-1576 and part number 80JX788. The items are designated as critical application items and must be sourced from approved manufacturers such as AMETEK/U S Gauge or Cotta Transmission Co. Delivery is required within 171 days, with a need ship date of March 21, 2027, and a final required delivery date of July 20, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contractor must adhere to strict quality and packaging standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Each item requires a temporary tag identifying the contract number, national stock number, manufacturer part number, and rated accuracy. Compliance with mercury-free requirements is mandatory per NAVSEA 5100-003D, and sampling must follow MIL-STD-1916 or ASQ H1331. Inspection and acceptance will take place at the destination.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
CONTROLLER, MOTOR
Solicitation # SPE7M0-26-T-094S
This contract is for the procurement of one motor controller, identified by NSN 6110-01-211-4704 and part number 24061 from Ward Leonard CT LLC. The order is managed under solicitation SPE7M0-26-T-094S for the Department of Defense, with a required delivery date of September 21, 2026. Delivery is required within five days after the order is placed, with shipping set as FOB Origin and inspection and acceptance occurring at the destination. The shipment is destined for the USALRCTR at Fort Benning, Georgia, and must be sent via the fastest traceable means, excluding parcel post. The contract mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 for marking. Additionally, the supplier must comply with environmental restrictions regarding mercury, ensuring no mercury or mercury-containing compounds are intentionally added to the hardware unless specifically exempted by NAVSEA.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
THERMOMETER, INDICATING
Solicitation # SPE4A6-26-T-35JZ
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIAL IND
Solicitation # SPE4A5-26-T-466F
DLA Aviation is soliciting quotes for the procurement of dial indicator pressure gages under solicitation number SPE4A526T466F. The requirement consists of two line items: 120 units to be delivered within 202 days after receipt of order and one unit to be delivered within 30 days after receipt of order. All items are to be shipped to DLA Distribution Warner Robins. This opportunity is designated as a total small business set aside under NAICS code 334519. Interested and responsible sources must submit their quotes electronically by the deadline of September 30, 2026. The procurement is managed by the Department of Defense through the DLA Aviation office located in Richmond, Virginia.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A6-26-T-35TF
DLA Aviation is seeking quotes for the procurement of 32 liquid quality transmitters under solicitation number SPE4A626T35TF. This combined requirement is set aside for SBA Certified Women-Owned Small Businesses under NAICS code 334519. The items are to be delivered to DLA Distribution within 171 days after the order is received. Approved sources for this equipment include 04034 181798, 04034 XM-79685-30-6200-W-H, 96169 H673-1201-116, and 96169 XM79685306200WH. All quotes must be submitted electronically by the deadline of September 30, 2026. No hard copies of the solicitation or technical drawings are available, and interested parties should refer to the electronic RFQ for further details.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
GAGE, DIFFERENTIAL, DIAL
Solicitation # SPE4A7-26-T-782X
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
HOUSING, INDICATOR
Solicitation # SPE4A1-26-T-2915
DLA Aviation is seeking quotes for the procurement of two indicator housings under NSN 6680011278883. The items are to be delivered to DLA Distribution San Joaquin within 171 days after the order is placed. The approved source for this requirement is identified as 93835 2771590-102. This opportunity is being conducted as a Request for Quote under solicitation number SPE4A126T2915, with a response deadline of September 30, 2026. All quotes must be submitted electronically via the provided portal, as hard copies of the solicitation and technical drawings are not available. The procurement falls under NAICS code 334519 and is managed by the Department of Defense office located in Richmond, Virginia.
AVIATION SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-368L
The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of five magnetic contactors under NSN 6110012794346. This requirement is set aside for SBA Certified Women-Owned Small Businesses under NAICS code 334519. The approved source for this item is 63743 N163 C900111, and delivery is required to DLA Distribution within 248 days after the order is received. Solicitation number SPE7M126T368L was posted on September 22, 2026, with a response deadline of October 5, 2026. All quotes must be submitted electronically via the provided link, as hard copies and separate technical drawings are not available. Interested parties should direct inquiries to the buyer listed in the solicitation document or through the DIBBS portal.
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
THERMOMETER, SELF-INDIC
Solicitation # SPE4A5-26-T-469P
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIAL IND
Solicitation # SPE4A5-26-T-467V
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A6-26-T-35FB
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
TUBE, SUCTION, SURGICAL
Solicitation # SPE2DS-26-T-462N
This contract is for the procurement of surgical suction tubes, consisting of 72 inch long clear plastic tubing. The items are issued in packages of 50 and must adhere to a strict shelf life of 60 months. To ensure product viability, no more than 9 months may have elapsed from the date of manufacture to the date of delivery to the government. The supplier must comply with DLA packaging requirements and ensure all materials are marked according to Medical Marking Standard No. 1. This solicitation, issued by the Department of Defense Medical Supply Chain, requires the bidder to specify the source and part number being supplied. Delivery is required within 20 days after the order is placed for the specified quantity under NSN 6515-01-389-6158.
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
FORCEPS, SUTURE CLIP
Solicitation # SPE2DS-26-T-463N
This solicitation from the Department of Defense Medical Supply Chain involves the procurement of sterile, disposable suture clip removal forceps featuring converging lower extractor jaws. The requirement is for one package containing 12 units under NSN 6515-01-073-1743. Delivery is required within 20 days after the order is placed. The contract is subject to several technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Bidders must specify the source and part number being supplied. The primary point of contact for this acquisition is Elizabeth Cruz, and the place of performance is located in FPO 96662.
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, HYPODERMIC
Solicitation # SPE2DS-26-T-461D
This contract is for the procurement of 21 gauge hypodermic needles, supplied in boxes of 12 units. The requirement specifies a total quantity of three boxes to be delivered FOB destination to the USS Mustin DDG 89. The items must have a total shelf life of 60 months, with no more than nine months elapsed from the date of manufacture to the date of delivery to the government. Packaging must adhere to commercial standards and ASTM D3951, ensuring each unit is in a sealed container to prevent damage. All materials must be marked according to Medical Marking Standard No. 1, with labels including the NSN, manufacturer and CAGE code, manufacture and expiration dates, and the contract or lot number. As these are FDA-regulated devices, the contracting official must coordinate with a product specialist for confirmation during the bidding process.
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 326299
New
DIBBS
MASK, RESPIRATOR
Solicitation # SPE2DS-26-T-461Y
This contract is for the procurement of small size N95 disposable particulate respirators under solicitation SPE2DS-26-T-461Y for the Department of Defense. The requirement consists of three boxes, with each box containing 160 respirators divided into eight smaller boxes of 20 units each. The items must be delivered within five days after the order is placed to the designated point of delivery in Buzzards Bay. Suppliers must adhere to strict packaging and marking standards, specifically Medical Marking Standard No. 1, ensuring all units are sealed in containers that protect against damage during transit. The product is classified as a Type I item with a non-extendable shelf life of 108 months. Bidders are required to specify the source and part number being supplied and must comply with DLA packaging and quality requirements.
All Other Rubber Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SURVIVAL KIT, INDIVIDUA
Solicitation # SPE2DS-26-T-463J
This contract is for the procurement of 15 individual tropical survival kits for tactical air crews, identified by NSN 6545-01-120-2632. Each kit is delivered in a plastic bag and contains a comprehensive set of survival and medical components, including a fishing kit, loperamide, erythromycin, skin closure materials, elastic bandages, water purification tablets, a flexible saw, and safety matches. The kits must be delivered within 162 days, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Specific requirements include strict adherence to medical marking standards and the provision of a current Safety Data Sheet due to the inclusion of safety matches. While the kits are generally not regulated by the DOT for transportation, shipping containers exceeding 50 pounds must bear specific hazardous material markings. Air Force requirements necessitate a modified kit under NSN 6545-01-534-0894, whereas the standard kit is supplied to other customers. All items are subject to FDA regulation and must be packaged in sealed unit containers to prevent damage.
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
CASE, MEDICAL INSTRUMEN
Solicitation # SPE2DS-26-T-462S
This contract is for the procurement of three medical instrument and supply sets. The required items are black, high-density copolymer plastic cases measuring 31.5 by 22.875 by 18.875 inches. These cases must be watertight, dustproof, and chemical resistant, featuring wheels, carrying handles, and the ability to float in water with a 350 lb capacity. The items are supplied without inserts and are not regulated by the FDA. The supplier must adhere to DLA packaging requirements and Medical Marking Standard No. 1. Delivery is required within 20 days, with FOB and inspection points set at the destination. Bidders are required to specify the source and part number being supplied, with referenced part numbers including Pelican Products P/N 1660 and General Dynamics Mission Systems P/N 10-2796108-1.
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE SET, INTRAOSSEOU
Solicitation # SPE2DS-26-T-461R
This contract is for the procurement of two packages of adult intraosseous injection needle sets designed for use with the EZ-IO battery powered driver. Each package contains five 15 gauge, 25mm long 304 stainless steel latex-free needles, five connectors, five wristbands, and directions for use. These sets are intended for patients weighing 3 kg or more. The supplier must adhere to commercial packaging standards, ensuring each unit is sealed to prevent damage and marked according to Medical Marking Standard No. 1. The items are subject to a non-extendable shelf life of 48 months. Delivery is required within 20 days after the order is received, and bidders must specify the source and part number being supplied.
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
STETHOSCOPE
Solicitation # SPE2DS-26-T-462F
This contract is for the procurement of six Littmann III stethoscopes featuring machined stainless steel two-sided tunable chest pieces and a single lumen binaural with a 27 inch tube length. The devices include a 1.7 inch large diaphragm and a 1.3 inch small diaphragm, with a headset made of anodized aluminum aerospace alloy and soft ear tips. Each unit weighs 150 grams and must be latex and phthalate free. The supplier must adhere to commercial packaging standards, ensuring each unit is in a sealed container within a suitable shipping exterior to prevent damage during transit. All materials must be marked according to Medical Marking Standard No. 1. This solicitation, issued by the Department of Defense under the Medical Supply Chain, requires delivery within 20 days after the order is placed.
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
WOUND CLOSURE KIT, UTIL
Solicitation # SPE2DS-26-T-462G
Surgical Appliance and Supplies Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
ADMINISTRATION SET, INF
Solicitation # SPE2DS-26-T-463M
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
ENHANCER, CIRCULATOR
Solicitation # SPE2DS-26-T-461F
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
NEEDLE, HYPODERMIC
Solicitation # SPE2DS-26-T-462T
Surgical Appliance and Supplies Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS