This Combined Synopsis/Solicitation opportunity from Department Of Labor was posted on September 15, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Combustion Air Handling Unit for the Mine Safety & Health Administration's Diesel Laboratory, Triadelphia, WV

Closed

1645-OTS-23-NAT-0112Federal

Submission Closed09/19/2023, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333415

New

ACT-1398 CRAC units, Sensors & Stands x5 - WJHTC NJ

Solicitation # act-1398-crac-units-sensors-stands-x5-wjhtc-nj

PTSI Managed Services Inc. (Parsons) is soliciting bids for the purchase of five Leibert CRAC units, including associated sensors and stands, to be utilized in New Jersey. This procurement falls under NAICS code 333415 and is designated as a set-aside for various small business categories, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. The solicitation, identified as act-1398-crac-units-sensors-stands-x5-wjhtc-nj, was posted on October 20, 2026, with a rapid response deadline of October 21, 2026. Interested parties may coordinate with the primary point of contact, Sarah Vaughan, regarding the requirements for this equipment acquisition.

PTSI MANAGED SERVICES INC. (PARSONS)

POSTED

DEADLINE

Commercial Refrigeration Display Case and Walk-in Evaporator SupplyThis subcontract involves the supply of commercial refrigeration units for prime contractors working on Defense Commissary Agency Europe Area projects. The scope of work includes providing display cases and walk-in chillers, including evaporators, specifically for installation at RAF bases in Lakenheath. All hardware must adhere to strict technical data requirements and comply with UK host nation statutory safety standards. The contract focuses on the delivery of physical hardware as detailed in the pricing schedule CLINs under NAICS code 333415. Managed by the Department of Defense, the procurement process began with a posting date of October 20, 2026, and a response deadline of October 29, 2026.

Defense Commissary Agency- Eur Area

POSTED

DEADLINE

4120--SPECIAL Duplex Strainer - MPLS

Solicitation # 36C26327Q0054

Solicitation 36C26327Q0054 is an accelerated request for quotes issued by the Department of Veterans Affairs Network Contracting Office 23 for the supply and delivery of a brand name or equal Keckley duplex strainer and gasket for the Minneapolis VA Health Care System. This is a small business set-aside conducted under FAR Part 12 for commercial products, utilizing NAICS code 333415. The government intends to award one firm fixed price contract for one 20 inch Keckley Basket Strainer 150 RF Duplex assembly and one O-ring gasket. All items must be new and unused, featuring a modular design with sections not exceeding 2,000 pounds, carbon steel shell construction, and a one year warranty covering defects in materials and workmanship. The period of performance is from November 9, 2026, to March 15, 2027, with all deliverables due at the Minneapolis facility by the end date. Delivery is required FOB Destination, and the contract price must include all equipment, accessories, and shipping charges. Prospective offerors must be registered in the System for Award Management and the SBA Small Business Search database. Quotes must be submitted via email to the contract specialist by 10:00 AM on October 30, 2026. Submissions must include a Buy American Certificate of Origin and details regarding the manufacturer's socioeconomic category.

Network Contract Office 23 (36C263)

POSTED

DEADLINE

Supply of Mechanically Refrigerated Cold Food CounterThis subcontract involves the procurement of one mechanically refrigerated cold food counter, identified by NSN 7310-01-445-5478, to support prime contractors fulfilling Department of Defense supply contracts for the Subsistence FSE Supply Chain. The selected provider must ensure the hardware is delivered alongside comprehensive supply chain traceability documentation in accordance with C03 (JUN 2023) standards and maintains full compliance with the Buy American Act. Strict adherence to technical specifications is required, specifically regarding packaging and marking standards ASTM D3951 and MIL-STD-129, as well as DLA RP001 palletization requirements. The contract falls under NAICS code 333415, with a response deadline set for October 26, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE7M0-27-T-0174

Solicitation SPE7M0-27-T-0174 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one duct type air cooling coil, identified by NSN 4130011916138 and part number 19-80-3397M from Edge Electronics Corporation. The required delivery date is October 1, 2026, with a delivery timeframe of five days after order. The item is to be delivered FOB Origin to the Puget Sound Naval Shipyard IMF in Bremerton, Washington, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List, and the contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Compliance with various FAR and DFARS clauses is required, including those regarding the Buy American Act, cybersecurity safeguarding of covered defense information, and the prohibition of hexavalent chromium.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

HEATER, DUCT TYPE, ST

Solicitation # SPE8E8-26-T-5797

Solicitation SPE8E8-26-T-5797 is a fixed-price request for quotation issued by the Defense Logistics Agency Troop Support Construction and Equipment for one stationary duct-type heater. The required item is identified by NSN 4520-01-371-8081 and part number 106-302307-021 from Chromalox Inc. Delivery is required within 20 days after order, with shipping terms set as FOB Destination. The designated delivery point is the USNS WATERS T AGS 45, with specific parcel post and freight addresses provided for FPO AE 09591. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Technical and quality compliance is governed by RA001 and RQ011, with a specific prohibition against the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA. Inspection and acceptance will occur at the destination. All quotes must be submitted via the DLA Internet Bid Board System, and payment will be processed electronically through the Wide Area WorkFlow system. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information.

Defense Logistics Agency

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE7M0-27-T-0178

Solicitation SPE7M0-27-T-0178 is issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of one duct type air cooling coil, identified by NSN 4130011916131 and part number 19-80-2979M. The requirement is classified under NAICS code 333415 and is set aside for small businesses, with a specific price evaluation preference for HUBZone concerns. The original required delivery date is October 1, 2026, with a delivery window of five days after receipt of order. Delivery is FOB Origin, and both inspection and acceptance will occur at the destination, specifically the Puget Sound Naval Shipyard IMF in Bremerton, Washington. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and specifies packaging and marking standards according to MIL-STD-2073-1E and MIL-STD-129. Special restrictions are in place regarding the use of mercury and the removal of government identification from non-accepted supplies. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and submission of all quotes via the DLA Internet Bid Board System by October 19, 2026. Key regulatory clauses apply, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

FILTER ELEMENT, AIR CON

Solicitation # SPE8E8-26-T-5549

Solicitation SPE8E8-26-T-5549 is a request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of one air conditioning filter element, identified by NSN 4130-01-696-2270. The requirement is categorized under NAICS code 333415 and specifies a delivery lead time of five days, with an original required delivery date of September 4, 2026. Delivery is set as FOB Destination, with shipping addresses provided for both a parcel post location in the United States and a freight destination in Japan. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence over ASTM standards. Palletization must follow RP001 requirements. Administratively, the contractor must use Wide Area WorkFlow for electronic invoicing and receiving reports. Key regulatory compliance includes the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Offerors must provide their CAGE code and Unique Entity Identifier and represent their small business status and compliance regarding covered defense telecommunications equipment.

Defense Logistics Agency

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE7M0-27-T-0185

Solicitation SPE7M0-27-T-0185 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of one duct type air cooling coil, identified by NSN 4130-01-257-9076. The requirement specifies part number 19-80-2612M1, associated with Edge Electronics Corporation and Electric Boat Corporation. Delivery is required within five days after order, with an original required delivery date of October 1, 2026. The item is to be delivered FOB Origin to the Puget Sound Naval Shipyard IMF in Bremerton, Washington, using the fastest traceable means, specifically prohibiting the use of parcel post. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with a general requirement to avoid plastics for wrapping or cushioning. Technical and quality standards are governed by the DLA Master List, though it is noted that no approved Technical Data Package is currently available for this NSN. Material restrictions prohibit the intentional addition of mercury, and the use of additive manufacturing is forbidden unless specifically authorized. Compliance with the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity standards is required. Inspection and acceptance will occur at the destination, and all invoicing must be processed electronically through the Wide Area Workflow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE8E8-26-T-4107

Solicitation SPE8E8-26-T-4107 is a fixed-price request for a single air filter element, identified by NSN 4130-01-696-2270, for the Defense Logistics Agency. The item is to be delivered FOB Destination to the USS George H W Bush CVN 77 in Norfolk, Virginia, with an original required delivery date of June 9, 2026, and a delivery window of five days after receipt of order. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically incorporating RP001 for packaging and palletization, RQ011 for the removal of government identification from non-accepted supplies, and RC001 for source approval documentation. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA requirements taking precedence. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The agreement incorporates various FAR and DFARS clauses covering cybersecurity, safeguarding of defense information, and domestic sourcing restrictions, including the Buy American Act and Berry Amendment.

Defense Logistics Agency

POSTED

DEADLINE

COLD FOOD COUNTER, MECH

Solicitation # SPE3SE-27-Q-0043

Solicitation SPE3SE-27-Q-0043 is a firm fixed price contract issued by the Defense Logistics Agency for the procurement of one mechanically refrigerated cold food counter, identified by NSN 7310-01-445-5478 and part number CFC-3T-2M-SNM-MLR. The item is destined for the USS John S McCain DDG 56, with a required delivery date of 30 days after receipt of order. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with palletization following DLA requirement RP001. Technical and quality requirements are governed by the DLA Master List, and the contractor must ensure that mercury is not intentionally added to the hardware, except where functionally required. Payment will be processed electronically through the Wide Area WorkFlow system. The contract incorporates various FAR and DFARS clauses covering cybersecurity, supply chain traceability, and the Buy American program. All quotes must be submitted via the DLA Internet Bid Board System.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE7M0-27-T-0177

Solicitation SPE7M0-27-T-0177 is a fixed-price request for quotation issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one duct type air cooling coil, identified by NSN 4130011916128 and part number 19-80-3013M. The required delivery date is October 1, 2026, with a delivery timeline of five days after order. The item is to be shipped FOB Origin to the Puget Sound Naval Shipyard IMF in Bremerton, Washington, using the fastest traceable means. Inspection and acceptance will occur at the destination per FAR 52.246-1. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds. Compliance with the Buy American and Balance of Payments Program (DFARS 252.225-7001) is required for quotes above the micro-purchase threshold. Additionally, the contract incorporates DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 1 day

General Info

Agency

Department Of Labor → DOL - Cas Division 4 Procurement

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

Place of Performance

Triadelphia, WV, 26059, USA

Set-Aside

NONE

Documents

Amendment 0001 to Solicitation 1605C4-23-Q-00081

amendment

High

Amendment 0002 to Solicitation 1605C4-23-Q-00081

amendment

High

Combustion Air Handling Unit - Drawings and Photos (Revised)

specifications

High

MSHA A&CC M&ESD Diesel Lab Building 4 HVAC Performance Work Statement

sow

High

RFQ 1605C4-23-Q-00081 - Air Handling Unit for MSHA Diesel Laboratory

rfq

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates

PhaseClosed

PostedSep 7

Combined Synopsis

Notice updatedSep 14

The notice description changed.

Notice updatedSep 15

Response deadline changed from Sep 15, 2023 to Sep 19, 2023. The notice description changed.

Response DeadlineSep 19

Deadline has passed

Submission Closed

09/19/2023, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Labor → DOL - Cas Division 4 Procurement

Contacts2 people available

OfficeWASHINGTON, DC, 20210, USA

Organization / AgencyDepartment Of Labor → DOL - Cas Division 4 Procurement

Office AddressWASHINGTON, DC, 20210, USA

Contacts

Rhonda Sizemore

Roy G. Massey

Full Description

The purpose of Amendment 2 (attached hereto) is to extend the due date for quotes from September 15, 2023 at 11:00 AM to Tuesday, September 19, 2023 at 3:00 PM. ______________________________________________________________________________________________________ The purpose of Amendment 1 (attached hereto) is to clarify the quote due date is September 15, 2023 at 11:00 a.m., not September 19, 2023 which was inadvertently shown on Pg. 18 of the solicitation. _____________________________________________________________________________________________________ The U.S. Department of Labor, Mine Safety & Health Administration, Approval & Certification Center's Deisel Laboratory is in need of a Combustion Air Handling Unit. The place of performance will be Triadelphia, West Virginia. This is a combined synopsis/solicitation for commercial products prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. (ii) The attached solicitation, 1605C4-23-Q-00081, is a request for quotation (RFQ). (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2023-05. (iv) This requirement is unrestricted and the associated NAICS code is 333415, Air Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment, with a small business size standard of 1,250 employees. Please thoroughly read the attached Request for Quotation and Performance Work Statement to fully understand the scope of the project. Any questions are due to Contract Specialist Rhonda Sizemore, in writing via email, by Monday, September 11, 2023 at 12:00 noon. Answers to all questions received will be posted on Contract Opportunites. The quote deadline is Friday, September 15, 2023 at 11:00 a.m. ET.