This Government Contract opportunity from Department Of Defense was posted on August 25, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Commercial Item Manufacturing and Supply

Closed

Federal

Submission Closed09/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332999

New

SLED

Specialized Plumbing and Manifold InstallationThis subcontract for Specialized Plumbing and Manifold Installation involves the supply and installation of fluid handling systems for prime contractors working on Mississippi Forestry Commission projects. The scope of work focuses on the fabrication and installation of TIG-welded stainless-steel manifolds and plumbing, specifically utilizing Grade 5 stainless steel hardware. To ensure quality and compliance, the contractor must hold TIG welding certification and provide manufacturer warranties for both the tank and the pump. The final deliverables consist of fully installed plumbing and manifold systems provided on a per-bed basis. This opportunity was posted on October 30, 2026, with a response deadline of November 16, 2026. The project falls under NAICS code 332999 and is managed through the state of Mississippi.

MS FORESTRY COMMISSION

POSTED

DEADLINE

Supply of Marine Hatches (NSN: 2040-01-357-9117)This subcontract, issued by the Department of Defense under Land Supplier Operations SMSG, requires the provision of 20 marine hatches manufactured or sourced according to NSN 2040-01-357-9117 specifications. The contract is designated as a Total Small Business Set-Aside under NAICS code 332999 and is intended for prime contractors supporting DLA supply contracts. Key technical requirements include marking each unit with a Unique Item Identifier using two-dimensional data matrix symbology. The supplier must also provide comprehensive Material Inspection and Receiving Reports that include both the UID and corresponding lot numbers for all 20 delivered units.

LAND SUPPLIER OPERATIONS SMSG

POSTED

DEADLINE

Annular Ball Bearing ManufacturerThis subcontract involves the manufacture of precision annular ball bearings, specifically Part Number 3151-252, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The production process must strictly adhere to source-controlled requirements, limited rights data, and MIL-DTL-197M preservation standards. To qualify, the manufacturer must possess specialized precision bearing machining and grinding equipment and maintain ISO 9001:2015 certification along with a CMMC Level 2 self-assessment. The contract is categorized under NAICS code 332999 and requires finished bearings to be delivered FOB Destination. Interested parties should note the response deadline of November 13, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Manufacturing of Valve Disks (PN 4820-01-281-9674)This subcontract involves the precision manufacturing of two Valve Disks, part number 4820-01-281-9674, for prime contractors supporting DLA Distribution San Joaquin hardware projects. The fabrication process must strictly adhere to TDP Rev A Gen 1 and meet the quality and inspection standards outlined in MIL-STD-1330E. Due to the technical nature of the components, the work requires the use of specialized metal forming equipment or precision CNC machining. The contractor is required to comply with DFARS 252.204-7012 to ensure the proper safeguarding of covered defense information. The project falls under NAICS code 332999 and is performed within the 95304-5000 zip code area. Interested parties must submit their responses by November 7, 2026.

POSTED

DEADLINE

LAP ASSEMBLY (PN: 1650-01-315-1701) SupplierThis subcontract, issued by the DLA Weapons Support Fluid Handling Division under the Department of Defense, requires the fabrication and assembly of 11 units of LAP ASSEMBLY (PN: 1650-01-315-1701). The selected supplier must ensure all components meet strict technical specifications, with quality assurance and testing conducted in accordance with MIL-STD-1916 or ASQ H1331. Additionally, the contractor is responsible for packaging and marking the assemblies according to ASTM D3951 and MIL-STD-129 standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332999. To be eligible, the supplier must maintain CMMC Level 2 compliance and adhere to the Buy American Act. The performance of the contract will take place in zip code 32212-0103, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE3SE-27-Q-0065

Solicitation SPE3SE-27-Q-0065 is a firm fixed price request for the procurement of 20 roof lifting jacks, identified by NSN 7360-01-247-2367. The requirement is split into two line items of 10 units each, designed to raise the roof of trailer-mounted field kitchens from transportable to operational mode. The items must conform to specific technical drawings, primarily basic drawing 81337 5-13-4600 Revision J, and various reference drawings. Delivery is required within 30 days after the date of order, with shipping terms set as FOB Destination to locations in Canada, specifically 25 CFSD Montreal and 7 CFSD Edmonton. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items may involve hazardous materials, compliance with IP025 and FAR 52.223-3 is required, including the submission of safety data sheets. Administrative requirements include registration in the System for Award Management and the use of the Wide Area Workflow for invoicing and receiving reports. This is not a small business set-aside, and quotations must be submitted to the DLA Troop Support Subsistence FSE Supply Chain office by November 5, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE3SE-27-Q-0066

Solicitation SPE3SE-27-Q-0066 is a Firm Fixed Price requirement issued by DLA Troop Support for the procurement of 76 Rain Trough Assemblies, identified by NSN 7360-01-043-8470. The contract specifies a delivery timeline of 30 days after delivery order, with FOB, inspection, and acceptance all set at the destination. The designated shipping location is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Technical specifications are governed by the US Army Soldier Systems Center technical data package, specifically drawing 81337 Revision F. Packaging and marking must strictly adhere to MIL-STD-129 and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials require packaging per FED-STD-313 and TQ requirement IP025, with the DLA Master List of Technical and Quality Requirements taking precedence. Administrative requirements include the use of the Wide Area Workflow system for EDI invoicing and the submission of proof of delivery to DLA Troop Support Food Service Equipment Post Award. The solicitation also incorporates various federal regulations, including DFARS 252.204-7012 for safeguarding covered defense information and specific prohibitions regarding Iran sanctions and inverted domestic corporations.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Request for Information: Additive Manufacturing

Solicitation # N0010427RZ058

The Naval Supply Systems Command Weapon Systems Support is conducting market research through Request for Information N0010427RZ058 to identify qualified sources capable of designing, producing, and delivering end items, piece parts, or entire assemblies using additive manufacturing methods. This notice is for information gathering only and does not constitute a solicitation or a binding contract. The government is specifically seeking information on vendor manufacturing capabilities, facilities, equipment, and certifications such as ISO 9001, AS9100, and Level 1 NAVSEA approvals. Additionally, the agency is requesting industry feedback on objective evaluation criteria for future competitive awards and the structuring of performance-based incentives within Firm-Fixed-Price contracts. Technical requirements specify that any additive manufacturing components must be fully interchangeable with traditionally manufactured equivalents and strictly adhere to material specifications, dimensional tolerances, and the baselines established in Project Peculiar Document 802-8436658. Contractors are responsible for all quality assurance, including Non-Destructive Testing and inspection criteria defined in the Technical Data Package. While a candidate list of National Item Identification Numbers for valves, actuators, and manifolds has been provided, the government may expand this to include Level I SUBSAFE items in the future. Interested vendors must submit administrative details, past performance, and capability statements via email or the NAVSUP Interested Vendor Database.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Metal Panel and Purlin SupplierThis subcontract agreement establishes a partnership to supply and deliver specialized metal roofing and siding materials for prime contractors working on Oklahoma Department of Corrections facility projects. The scope of work specifically includes the provision of 3 by 1-1/2 inch Cee Purlins, white Low-Rib Plus Panels measuring 36 inches wide with a 3/4 inch rib height, and 4 by 8 by 1-1/2 number 9 EXP Metal FLT. All delivered materials must strictly adhere to UL790 Class A fire resistance and UL2218 Class 4 impact resistance standards. Logistical requirements dictate that all panels and purlins be delivered directly to the Oklahoma State Penitentiary. Due to the sensitive nature of the project location, all personnel involved in the execution of the contract must successfully pass background checks conducted by the Oklahoma Department of Corrections. This procurement falls under NAICS code 332999 and is managed through the state of Oklahoma.

Oklahoma Department of Corrections

POSTED

DEADLINE

Towed Body Assembly ManufacturerThis subcontract involves the manufacture and assembly of three Towed Body Assemblies, identified by NSN 8145001656694, for prime contractors supporting DLA procurement projects. The scope of work includes the fabrication of body structures, integration of internal and external components, and the execution of rigorous quality assurance testing. All deliverables must be packaged and marked in strict accordance with MIL-STD-2073 and MIL-STD-129 standards. The project is managed by the Department of the Navy through the DLA Aviation office in Philadelphia. To be eligible, the contractor must maintain ISO 9000 certification and ensure full compliance with the Buy American Act. Performance will take place in Philadelphia, with a response deadline set for November 30, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Pump Housing Replacement Parts and MaterialsThis subcontract involves the procurement of replacement materials, parts, and components to support prime contractors on pump overhaul projects for the Department of the Navy's NAVSUP Weapon Systems Support. The scope of work specifically requires the manufacture or sourcing of parts for NSN 1610-01-641-0650, ensuring all items conform to the Technical Data Package using high-grade metals and alloys. The final delivery consists of certified replacement components for 22 pump housings. To ensure quality and traceability, the provider must maintain ISO 9001 compliance and furnish comprehensive documentation, including mill test reports and dimensional inspection reports. The performance of this contract is centered in Philadelphia, Pennsylvania, under NAICS code 332999.

Navsup Weapon Systems Support

POSTED

DEADLINE

PLATE,MOUNTING — 5340014160894 — N0010427QNA33

Solicitation # N0010427QNA33

This fixed-price contract, issued by the Navsup Weapon Systems Support Mech, requires the manufacture of the PLATE, MOUNTING (NSN 5340-01-416-0894) in accordance with drawing 497A73200 and CAGE 53711. The scope includes the production of an assembly of parts that must adhere to specific process qualifications for vulcanization of chloroprene rubber, installation of vibration damping tiles, bonding with epoxy adhesives, and gap filling. The contract includes an option provision allowing the government to increase the order quantity by up to 100 percent after 365 days. Award is based on the lowest aggregate total price for the total quantity, including the option, provided the offer is technically acceptable and meets risk assessments via the Supplier Performance Risk System. Quality assurance is stringent, requiring a quality system compliant with ISO 9001 or MIL-I-45208. The contractor must perform First Article Testing, including tensile tests on bonded structures and hardness verification per MIL-PRF-81733, with reports submitted via DD Form 1423 for approval prior to production. Strict mercury-free requirements are mandated for use on submarines and surface ships, and configuration control is managed under MIL-STD-973. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1, with specific requirements for Depot Level Repairable labels and palletization. Inspection and acceptance are conducted at the origin, and electronic invoicing is processed through the Wide Area WorkFlow system.

Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in about 1 month

AI Contract Overview

This subcontract, issued by the Department of Defense through the ASC Commodities Division, involves the manufacture and delivery of a commercial off-the-shelf precision metal component identified by NSN 5310015162111. The contractor is required to ensure that all items are compliant with specific military packaging and marking standards. The project falls under NAICS code 332999 and is to be performed in New Cumberland, Pennsylvania. The solicitation was posted on August 25, 2026, with a response deadline of September 2, 2026. Interested parties must adhere to the specified technical requirements for the precision metal component to qualify for this supply contract.

General Info

DoD subcontract for manufacturing and delivering precision metal components in New Cumberland, Pennsylvania.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-22DT.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WASHER, FLAT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 25

subcontract

Response DeadlineSep 2

Deadline has passed

Submission Closed

09/02/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture and delivery of a commercial off-the-shelf (COTS) precision metal component (NSN 5310015162111) compliant with military packaging and marking standards.