Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Commercial Packaging and Labeling Services for Medical Supplies

Active

Federal

Response Deadline09/01/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through the Department of Defense, specifically the Medical Supply Chain MD Surg FSF, requires the commercial packaging, sealing, and labeling of medical test tablets. All services must be performed in strict compliance with established military and shipping standards to ensure the integrity and transportability of the medical supplies. The work is to be executed at Fort Sill, Oklahoma, under NAICS code 323120. Interested parties must submit their responses by September 1, 2026, following the posting date of August 26, 2026.

General Info

DoD subcontract for medical tablet packaging and labeling at Fort Sill, Oklahoma.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

323120 - Support Activities for PrintingView NAICS

Place of Performance

FORT SILL, OK, 73503-0000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE2DS-26-T-374F.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PHENOL RED PH TEST TAB

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 26

subcontract

Response DeadlineSep 1

Submission deadline

Response Deadline

09/01/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide commercial packaging, sealing, and labeling of medical test tablets in compliance with military and shipping standards.

Similar Contracts

Same NAICS industry code

Military-Compliant Packaging and Marking ServicesThe Department of Defense, through the ASC Commodities Division, is seeking a subcontractor for military-compliant packaging and marking services for wiring harnesses. The scope of work requires strict adherence to MIL-STD-129 and MIL-STD-2073-1E standards, encompassing specific processes such as coiling, bag-in-box containment, and the application of logistics marking. This opportunity is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 323120. The solicitation was posted on August 25, 2026, with a response deadline of September 9, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Print and Design Services

Solicitation # 721-27002

The University of Texas at Austin is seeking proposals from qualified vendors to provide print and design services. This solicitation, identified by number 721-27002, requires vendors to perform work as detailed in the scope of work section of the request for proposal. Interested parties must submit their responses by the deadline of September 10, 2026, at 8:30 PM. The primary point of contact for this opportunity is Lina-Courtney Trejo, and the performance of the services will take place within the state of Texas.

University of Texas at Austin

POSTED

DEADLINE

Branded Label/Sticker Application & Packaging BrandingThe Florida Department of Agriculture and Consumer Services is seeking a subcontractor for the application of Fresh From Florida branded labels to private-label sweet corn packaging. This project focuses on ensuring consistent brand compliance through the printing and application of stickers at either the retail or distribution level. The solicitation was posted on August 24, 2026, with a response deadline of September 15, 2026. This opportunity falls under NAICS code 323120 and is managed through the Florida Department of Agriculture and Consumer Services.

Department of Agriculture and Consumer Services

POSTED

DEADLINE

Bid for: SERVICE MAINTENANCE, PROGRAMMING, PERIPHERAL SUPPLIES, AND BALLOT PRINTING

Solicitation # BD-27-1143-PRO15-PRO15-132710

The City of Brockton Procurement Department has issued a solicitation for service maintenance, programming, peripheral supplies, and ballot printing. This contract opportunity is managed by the Massachusetts procurement office and requires all bids to be submitted electronically through the Bid Net Portal. Interested parties must ensure their submissions are completed by the deadline of 12:00 p.m. on Tuesday, September 8, 2026. The solicitation is identified by number BD-27-1143-PRO15-PRO15-132710 and was officially posted on August 24, 2026. The place of performance is located in Brockton, Massachusetts. For further inquiries or additional information regarding the bidding process, prospective vendors should contact the primary purchaser, Donnette McManus, or reach out via email to procurement@brockton.gov.

PRO15 - Procurement Department

POSTED

DEADLINE

Shrink-Wrapping and Kit AssemblyThe United States Government Publishing Office, specifically through Customer Services, is seeking a subcontractor for a shrink-wrapping and kit assembly project. The scope of work involves the precise assembly of four printed items into a single set, ensuring they are placed in the correct order and shrink-wrapped for final distribution. This opportunity is categorized under NAICS code 323120. Interested parties must submit their responses by the deadline of August 28, 2026, at 3:00 PM.

Customer Services

POSTED

DEADLINE

in about 16 hours

Perfect Binding and Saddle-Stitching ServicesThis subcontract for the United States Government Publishing Office involves the provision of professional binding services for three specific documents. The scope of work includes the production of two perfect-bound volumes consisting of 544 and 220 pages respectively, as well as one saddle-stitched supplement of 64 pages. All deliverables must strictly adhere to GPO standards regarding grain, scoring, and overall durability. The opportunity is categorized under NAICS code 323120 and is managed by the Customer Services agency. Interested parties must submit their responses by August 28, 2026, at 3:00 PM.

Customer Services

POSTED

DEADLINE

in about 16 hours

Screen Printing for Apparel

POSTED

DEADLINE

General Printing Services

Solicitation # 2026251

WeGo Public Transit is soliciting proposals for a firm-fixed-price contract to provide comprehensive copying, offset, and specialty printing services. The selected contractor will be responsible for all labor, equipment, and materials necessary to produce high-quality printed items, including brochures, maps, annual reports, banners, and signs. Preference will be given to firms capable of producing promotional materials, tickets, and screen-printed T-shirts. The contractor must be able to process files from Microsoft Office and Adobe via various digital means and provide hourly rates for design services. All deliverables must be FOB Nashville, Tennessee, with deliveries made to up to three locations within Davidson County. The solicitation, identified as number 2026251, requires a comprehensive submission including a cost form and various certifications regarding eligibility, lobbying, and debarment. Proposals must remain valid for 120 days from the opening date. The contract is subject to USDOT-required provisions under FTA Circular 4220.1G and Tennessee state clauses regarding nondiscrimination and conflicts of interest. Quality is determined solely by the agency, and proofs are required for approval before final production. An independent cost estimate projects a five-year total value of approximately 139,620.89 dollars, with an estimated first-year spend of 26,298.24 dollars.

POSTED

DEADLINE

IFB # PW-1274 -Printing & Mailing of Utility Invoices

Solicitation # BD-24-1270-TOF01-TOF01-132342

The City of Framingham is seeking sealed bids for on-call services to handle the printing and mailing of monthly and quarterly utility invoices. The scope of work involves an estimated volume of 76,000 invoices to be processed and mailed over the course of a fiscal year. This solicitation, identified as IFB # PW-1274, was posted on August 19, 2026, with a response deadline of September 9, 2026. The project will be performed in Framingham, Massachusetts, and is managed by the Purchasing department under the primary point of contact, Audra Shaw.

TOF01 - Purchasing

POSTED

DEADLINE

RFP Primary 10221453 Digital Output and Finishing Services

Solicitation # 0000040093

The State of California is seeking a contractor to provide comprehensive digital output and finishing services for the Department of Water Resources. The selected vendor will be responsible for providing all necessary labor, materials, equipment, and facilities to create visual presentation materials. These services are intended to support the departments water education goals and meet the requirements of the Governor's Office, the Natural Resources Agency, and various interagency clients. This solicitation, identified as Tender 0000040093, has a closing date of September 2, 2026, at 1:00 PM. The place of performance is located in West Sacramento, California. Interested parties should coordinate with the designated contact, Annie Cho, and may be required to register on the State of California's official website to participate in the bidding process.

State of California

POSTED

DEADLINE

RFP Primary 10221453 Digital Output and Finishing Services

Solicitation # 0000040093

The California Department of Water Resources is seeking a contractor to provide comprehensive digital output and finishing services under solicitation number 0000040093. The selected provider will be responsible for furnishing all necessary labor, materials, equipment, and facilities to produce visual presentation materials designed to support water education goals and meet the requirements of the Governor's Office, the Natural Resources Agency, and various interagency clients. This solicitation was posted on August 17, 2026, with a response deadline of September 2, 2026. The contract will be performed within the state of California, and interested parties can coordinate with the primary point of contact, Annie Cho, or access further details through the Cal eProcure portal.

California Department of Water Resources

POSTED

DEADLINE

MIL-STD-129 Compliant Marking and Bar-CodingThis subcontract, issued by the Defense Logistics Agency under the Department of Defense, focuses on the application of durable, machine-readable bar-codes and permanent labels on containers. The work must be performed in strict accordance with MIL-STD-129 Paragraph 5.11 and requires the inclusion of specific contract numbers and special handling markings. The project is categorized under NAICS code 323120 and was posted on August 17, 2026. This effort ensures that all shipping containers meet federal military standards for identification and logistics tracking to maintain compliance with Department of Defense requirements.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

Domestic Sourcing and Regulatory Compliance ConsultingThis subcontract opportunity, titled Domestic Sourcing and Regulatory Compliance Consulting, is issued by the Department of Defense under the Medical Supply Chain MD Surg FSF agency. The primary objective of the contract is to provide expert advisory services to ensure that medical procurements strictly adhere to the Buy American Act, the Berry Amendment, and DFARS sourcing requirements. The project is categorized under NAICS code 541611 and will be performed at Fort Sill, Oklahoma. Interested parties must submit their responses by September 1, 2026, following the posting date of August 26, 2026.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Hazardous Material Compliance and Safety Data Sheet (SDS) PreparationThis subcontract opportunity with the Department of Defense, specifically the Medical Supply Chain MD Surg FSF, focuses on the identification of hazardous components and the preparation of compliant Safety Data Sheets. The primary objective is to ensure all documentation meets strict federal and Department of Defense requirements for hazardous material compliance. The work is designated for performance at Fort Sill, Oklahoma, under NAICS code 541690. Interested parties must submit their responses by September 1, 2026, following the posting date of August 26, 2026.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Supply of Phenol Red pH Test TabletsThis subcontract involves the manufacture and delivery of 1,000 Phenol Red pH test tablets, which must be packaged in foil blister strips and adhere to specific military and medical standards. The project is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, with the place of performance located at Fort Sill, Oklahoma. The solicitation was posted on August 26, 2026, with a response deadline of September 1, 2026. Classified under NAICS code 325412, the contract focuses on the production of pharmaceutical preparations and related medical supplies to meet government requirements.

Pharmaceutical Preparation Manufacturing

POSTED

DEADLINE

AIRWAY, NASOPHARYNGEAL

Solicitation # SPE2DS-26-T-376L

This contract is for the procurement of one package of Robertazzi oblique tip nasopharyngeal airways, consisting of 12 non-sterile, disposable latex rubber units in size 30 French. The items must be delivered within 20 days after the order is placed to the Department of Defense medical supply chain. The product has a non-extendable shelf life of 60 months, and no more than 9 months may have passed from the date of manufacture to the date of delivery. All containers must be clearly marked with the lot control number and manufacture date, while shipping containers must include the purchase order number, transportation control number, and build directive number. Bidders are required to specify the source and part number being supplied.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

FORCEPS, TISSUE

Solicitation # SPE2DS-26-T-374X

This solicitation from the Department of Defense Medical Supply Chain seeks one unit of stainless steel intestinal tissue forceps. The required equipment must be a Turner-Babcock design with solid jaws, ring handles, and a nominal overall length of 9.5 inches, specifically intended for intestinal surgical procedures. The contract is identified by NSN 6515-01-458-4198 and requires delivery within five days after receipt of order. Bidders must specify the source and part number being supplied and adhere to DLA packaging requirements, technical quality standards, and regulations regarding the removal of government identification from non-accepted supplies.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

HUMIDIFIER, HYGROSCOPIC

Solicitation # SPE2DS-26-T-374Y

This contract is for the procurement of hygroscopic humidifiers with Luer-lock anesthesia circuits, specifically designed for use with Norkomed and Tiro M field anesthesia apparatus. The equipment is recommended for tidal volumes between 150 and 1500 ml and includes a Luer-lock port for gas sampling. The items are issued in packages of 20 units each, with a total requirement of one package under purchase request 7018046471. The supplied products must have a shelf life of 60 months, and no more than nine months may have elapsed from the date of manufacture to the date of delivery to the government. Delivery is required within five days after the order is placed. The contractor must specify the source and part number being supplied and adhere to DLA master technical, quality, and packaging requirements. This solicitation is managed by the Department of Defense Medical Supply Chain for performance in San Antonio, Texas.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

DRESSING, CHEST SEAL WO

Solicitation # SPE2DS-26-T-345L

Solicitation SPE2DS-26-T-345L is a request for quotations issued by the DLA Troop Support Medical Supply Chain for the procurement of chest seal wound dressings, specifically identified by NSN 6510-01-642-6212 and North American Rescue P/N 10-0037. These FDA-regulated medical devices are twin-pack dressings featuring three-channel pressure relief vents designed to prevent air from entering the chest cavity during inspiration while allowing air and blood to escape during exhalation. The product is a peel-and-apply system with a 60-month shelf life, requiring that no more than nine months elapse from the date of manufacture to the date of delivery to the government. The procurement requires delivery FOB destination to sites in Pensacola, Florida, and Fort Campbell, Kentucky, with a required delivery window of five days after receipt of order. Packaging must comply with MIL-STD-129 and ASTM D3951, with specific palletization requirements under RP001. The solicitation is not a small business set-aside and incorporates various federal regulations, including the Buy American Act and DFARS requirements for safeguarding covered defense information. All quotes must be submitted via the DLA Internet Bid Board System, and payment will be processed electronically through the Wide Area WorkFlow system.

All Other Health and Personal Care Retailers

POSTED

DEADLINE

in about 18 hours

SPONGE, LAPAROTOMY

Solicitation # SPE2DS-26-T-351E

This solicitation is for the procurement of RFDetect surgical laparotomy sponges, specifically designed for surgical object detection with X-ray capabilities. The items measure 4x18 inches and are sterile, disposable, and supplied in cases of 200 units. The contract requires one case under NSN 6510-01-687-4052, with a delivery requirement of five days after the order is placed. The Department of Defense, through the Medical Supply Chain MD Surg FSF, mandates that all supplies adhere to DLA master technical and quality requirements and Medical Marking Standard No. 1. Bidders must specify the source and part number being supplied. Packaging must be commercial grade, utilizing sealed unit containers and suitable exterior shipping containers to ensure safe delivery to Fort Bragg, ZIP 28310.

Sanitary Paper Product Manufacturing

POSTED

DEADLINE

in about 18 hours

CASE, DEFIBRILLATOR-MON

Solicitation # SPE2DS-26-T-374G

This solicitation is for the procurement of one soft molded carrying case designed for the ZOLL Propaq MD defibrillator-monitor. The case must be constructed of vinyl with cushion siding to ensure the protection of the equipment. The item is identified by NSN 6515-01-615-0896 and is issued as a single unit. The contract is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, with performance located in San Antonio, Texas. Bidders are required to specify the source and part number being supplied and must adhere to DLA packaging requirements and technical quality standards. Delivery is required within five days after the order is placed.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

SUTURE, ABSORBABLE, SURG

Solicitation # SPE2DS-26-T-350A

This solicitation from the Department of Defense Medical Supply Chain for the procurement of absorbable surgical sutures specifies a plastic glycolide lactide copolymer, size 4-0, 27 inches in length, with a 3.5 inch circle and 36 sutures per box. The requirement is for three boxes under NSN 6515-01-604-1967, with a delivery deadline of 20 days after the order is placed. The contract mandates a non-extendable shelf life of 60 months and adherence to DLA packaging and quality requirements. Bidders must provide the specific source and part number being supplied. The solicitation is managed by the Medical Supply Chain MD Surg FSF, with a response deadline of August 28, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

in about 18 hours

ANTISERUM, VIBRIO CHOLE

Solicitation # SPE2DS-26-T-349Q

This contract is for the procurement of five bottles of monovalent Vibrio Cholerae Ogawa antiserum, with each bottle containing 3ml. The material is subject to a non-extendable shelf life of 36 months, and no more than five months may have elapsed from the date of manufacture to the date of delivery to the government. The product requires strict refrigeration storage between 2 to 8 degrees Celsius and must not be frozen. The supplier must adhere to DLA packaging and medical marking standards, ensuring each unit is in a sealed container to prevent damage. Compliance with the Hazard Communication Standard is required, including the submission of Safety Data Sheets and appropriate labeling. Delivery is expected within 20 days after the order is placed, and all labels must clearly state the manufacture date, expiration or retest date, and the contract or lot number.

Family Planning Centers

POSTED

DEADLINE

in about 18 hours

Solicitation # SPE2DS-26-T-376C

This solicitation from the Department of Defense Medical Supply Chain for the procurement of adult plastic elongated nonrebreathing oronasal masks requires the delivery of nine packages, with each package containing 50 disposable units. The masks feature a contour molded design with an integrated reservoir bag and 84-inch tubing, including a swivel mechanism for flexible oxygen source attachment. All supplies must be destroyed after 60 months and adhere to specific DLA packaging and quality requirements, including the removal of government identification from non-accepted supplies. The contract, identified by solicitation number SPE2DS-26-T-376C and NSN 6515-01-164-3755, mandates a delivery timeline of 20 days after the order is placed. Bidders are required to specify the source and part number being supplied. The place of performance is located in Williamsburg, Virginia, and the response deadline for this federal acquisition is September 1, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE