Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on March 17, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Common Munitions Built-In-Test Reprogramming Equipment System (CMBRE) - Contractor Logistics Support (CLS) and Production

Closed
FA8533-25-R-0001Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334515
New
DIBBS
METER, AUDIO LEVEL
Solicitation # SPE7M1-27-T-0210
Solicitation SPE7M1-27-T-0210 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 10 audio level meters. This requirement is designated as a total small business set-aside under NAICS 334515. The items, identified by NSN 6625006489157 and associated with Prime Technology LLC part numbers 0150M1505AB0094 and 150W-DB, are classified as critical application items. Delivery is required within 91 days after order, with shipping terms set as FOB Origin and the final destination for both inspection and acceptance located at DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and safety standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Because the items may contain batteries and are subject to hazardous materials regulations, the contractor must comply with IP025 and the Hazard Communication Standard for labeling. Quality assurance will be managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury and requires compliance with various DFARS and FAR clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the use of Wide Area WorkFlow for electronic invoicing and payment.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 2 days

General Info

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

Place of Performance

Warner Robins, GA, USA

Set-Aside

NONE

Documents

16

FA8533-25-R-0001-0001 Amendment - CMBRE Support

PDF, High priority: read this firstamendment
High

FA8533-25-R-0001-0002 Amendment

PDF, High priority: read this first2 pages · amendment
High

FA8533-25-R-0001 Amendment 0003

PDF, High priority: read this first9 pages · amendment
High

FA8533-25-R-0001 - CMBRE System Support RFP

PDF, High priority: read this first354 pages · rfp
High

FA8533-26-0001 DD Form 254

PDF, High priority: read this first5 pages · specifications
High

FD20602630003 - AFMC Form 158 Packaging Requirements

PDF, High priority: read this firstspecifications
High

FD2060-26-30003 CDRL B/E/H/L/P010

PDF, High priority: read this first3 pages · cdrl
High

FD2060-26-30003 CDRL Exhibit CFJMQ - Engineering Drawing Tree

PDF, High priority: read this first3 pages · cdrl
High

FD2060-26-30003 CDRL Exhibits ADGKN

PDF, High priority: read this first67 pages · sow
High

FD20602630003 - Transportation Data for Solicitations (DD Form 1653)

PDF, High priority: read this first3 pages · specifications
High

GFP Attachment - CMBRE Plus (1010391)

PDF, High priority: read this first1 page · gfp-attachment
High

IUID Marking Details - DFARS 252.211.7003

PDF, High priority: read this first31 pages · specifications
High

IUID Marking Details - NSN 6625015330798KV and Others

PDF, High priority: read this first6 pages · specifications
High

PWS FD2020-26-30003 - CMBRE Contractor Logistics Support

PDF, High priority: read this first39 pages · sow
High

PWS FD2020-26-30003 - CMBRE Contractor Logistics Support

PDF, High priority: read this first39 pages · sow
High

Wage Determination 2015-4495, Revision 25

PDF, High priority: read this firstwage-determination
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

4 updates
PhaseClosed
Posted

Presolicitation

Notice updated

The notice description changed.

Type Changed

Presolicitation → Solicitation

Notice updated

The notice description changed.

Notice updated

Response deadline changed from Mar 20, 2025 to Apr 20, 2025. The notice description changed.

Notice updated

The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8533 Aflcmc Rokb
Contacts2 people available
OfficeROBINS AFB, GA, 31098-1670, USA
Office AddressROBINS AFB, GA, 31098-1670, USA
Contacts
Benjamin Wilton

Full Description

Show more
Amendment 0003 is to incorporate provision and clause changes as a result of Class Deviation 2025-O0003 - Restoring Merit-Based Opportunities in Federal Contracts and Class Deviation 2025-O0004 - Revocation of Executive Order on Sustainability. Amendment 0002 is to extend the proposal due date to 20 April 2025. Amendment 0001 is added to correct clauses, correct Best Estimated Quantity on CLIN 2035, correct CLINs X007-X008 and X012-X040 to show Best Estimated Quantity, and attach revised Performance Work Statement dated 5 Feb 2025. This Request for Proposal (RFP) is to establish a follow-on sole source contract to provide new production requirements and Contractor Logistics Services (CLS) required to sustain the Common Munitions BIT/Reprogramming Equipment (CMBRE) Systems to include the capability to repair CMBRE systems, provide consumable production, parts production, sustaining engineering, program management, and maintain cyber security requirements. The contractor shall furnish all material, support equipment, tools, test equipment, and services. The contractor will be responsible for providing, maintaining, and calibrating all support equipment at their facility or a subcontractor's facility. Contractor furnished material or parts used for replacement shall equal or exceed the quality of the original material or parts. The CMBRE system consists of the CMBRE Plus (NSNs 6625-01-535-4586 and 6625-01-654-1986) along with adapter units (ADUs) and all associated cables. Specifically, the CMBRE Plus consists of three cables: Test Adapter Unit (TAU) case, Controller Unit Test case, and The CMBRE Accessory Kit case. In addition, the ADU-891 consists of two cases: one case houses a switchbox and munitions unique interface cable, and the other case holds the remaining munitions unique interface cables. The ADU-890 is a single case containing a switchbox and munitions unique interface cable. The CMBRE systems are used in weapons build-up areas by the United States Air Force (USAF), United States Navy (USN), and numerous foreign military forces. All CMBRE Interface Test Adapters (ITA), Initial Spare Kits, ADU-891 Conversion Kits, and all associated cables will be covered under this strategic contract. For the production portion of the contract, the supplier must provide the following: ADU-890/E (NSN 6625-01-533-0798), ADU-891(V)1/E (NSN 6625-01-543-8090), ADU-891(V)3/E (NSN 6625-01-561-0677), ADU-891A(V)2/E (NSN 6625-01-638-6914), CMBRE initial spares kits, and assorted items belonging to the CMBRE configuration. For the Contractor Logistics Support (CLS) service portion of the contract, the supplier must provide Program Management, Technical Support, Depot Level Repair, Engineering Services for Obsolescence Mitigation, meet and assist with cybersecurity of the CMBRE system, and as-needed and per Government request, development and implementation of FMS Familiarization & Fault Isolation Courses. This Indefinite Delivery, Requirements type contract will include a basic twelve (12) month period of performance with four (4) twelve month option periods. Per FAR Clause 52.217-8, Option to Extend Services against applicable orders will also be included. Quantities are based on Best Estimated Quantities (BEQ). Destination and delivery requirements are to be determined (TBD) and will be cited with the issuance of individual task/delivery orders. Solicitation documents will be posted to SAM.gov website. Electronic procedure will be used for this solicitation at SAM.gov. No telephone requests will be honored and no hard copies will be mailed out. This is a sole source requirement per FAR 6.302-1. Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. This requirement will be purchased from Northrop Grumman Systems Corporation (NGSC), CAGE: 1LTU5. Responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency. The Government does not own the data for these items. No technical data is available. No foreign contractors shall be permitted to participate at the prime contractor level and no awards shall be made to foreign contractors.

More opportunities from Department Of Defense → FA8533 Aflcmc Rokb

Same awarding agency

NAICS: 334515
Federal
FOPR for F-16 AAGs for the Common Aircraft Portable Reprogrammable Equipment (CAPRE) Secure Memory Loader Verifier (SMLV)
Solicitation # FA8533-26-R-0007
Solicitation FA8533-26-R-0007 is a Fair Opportunity Proposal Request for the development of F-16 Aircraft Adapter Groups (AAGs) to be integrated into the Government's Common Aircraft Portable Reprogrammable Equipment (CAPRE) Secure Memory Loader Verifier (SMLV). The scope of work includes the development of production-level software, hardware, and corresponding technical orders. A critical requirement of the contract is for the contractor to obtain Line Replaceable Unit (LRU) data and artifacts from Original Equipment Manufacturers (OEMs), a list of which is provided in Attachment J. The total requirement consists of 1,800 cables, specifically 300 cables each for the ALQ-131, Anti-Skid, CPDG/eCPDG, CSFDR, EEFC, and FCSDR LRUs. This effort is restricted exclusively to awardees of the ATSA Multiple Award Contract (FA8533-24-R-0002) and will be awarded as a task order. Proposals must be submitted via DoD SAFE by December 16, 2026, at 4:00 pm EST. Evaluation will include a focus on past performance, specifically historical experience and the ability to integrate software and hardware, with a 15-page limit for the past performance volume. Performance may take place at various Air Force base Software Integration Lab (SIL) locations, and access to specific Technical Orders will be granted via ETIMS upon award.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

15 days ago

DEADLINE

in about 2 months
View Details
NAICS: 334511
Federal
Hardware and Software Integration for COLT+ UpgradeThe contract entails the integration of upgraded hardware and software components into the COLT+ system, specifically supporting the CRIM enhancements and a comprehensive technical refresh to modernize system capabilities. This work is focused on achieving full compatibility with the F-22 and B-2 aircraft, requiring rigorous system-level testing to ensure operational readiness and interoperability within existing defensive and combat platforms. The effort involves precise coordination between avionics, software architecture, and mission systems to meet stringent military performance standards without disrupting current mission-critical functions. The work is being performed under a subcontract through the Department of Defense, under the agency designation FA8533 Aflcmc Rokb, with all activities centered at Orlando. The North American Industry Classification System code 334511 confirms the contractor's role in navigation, measuring, electromedical, and control instruments manufacturing, indicating specialized technical expertise in defense-grade instrumentation and integration. The contract was posted on July 7, 2026, signaling an active procurement timeline aimed at maintaining the technological edge of U.S. strategic aircraft systems through timely modernization and validation testing.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS