Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Component Supply for Repair Kit (Raw Materials and Fasteners)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply of military-grade steel, aluminum, springs, and fasteners essential for assembling the Repair Kit, Latch, with strict requirements for traceable material certifications to ensure compliance with defense standards. All materials must be domestically sourced and delivered within the United States to support secure, reliable logistics and procurement integrity. The subcontract falls under NAICS code 332312, indicating manufacturing of forged and stamped metal products, and is managed by the Defense Logistics Agency under the Department of Defense. The project is posted as of July 21, 2026, with performance obligations tied to the specific assembly needs of the repair kit, emphasizing quality control, documentation, and timely delivery to maintain operational readiness.

General Info

Domestically sourced military-grade materials for repair kit assembly with traceable certifications and strict DOD delivery requirements.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 21

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of military-grade steel, aluminum, springs, and fasteners for use in the assembly of the Repair Kit, Latch, with traceable material certifications and domestic delivery.

Similar Contracts

Same NAICS industry code

BRACES, BRACKETS (M14-8)Saskatchewan Power Corporation is soliciting bids for the purchase and delivery of BRACES and BRACKETS designated as M14-8 through Tender Number 1018018, posted on MERX on July 21, 2026. All details regarding the requirements, specifications, and delivery expectations are outlined in the Invitation to Tender document accessible via MERX, with any amendments, clarifications, or updates also posted exclusively on that platform. The downloadable word version of the tender is provided for convenience, but in the event of any inconsistencies, the PDF version shall govern. The response deadline for submissions is August 11, 2026, at 9:00 PM SAR. The place of performance is within Saskatchewan, and all inquiries should be directed to Ochuko Ekpo, the primary point of contact, via email at ooekpo@saskpower.com or by phone at 306-566-3851. The contract is issued under the Saskatchewan Public Sector and is not subject to any specific set-aside provisions.

Saskatchewan Power Corporation

POSTED

about 20 hours ago

DEADLINE

Structural Steel Fabrication and InstallationThe contract requires the fabrication and installation of structural steel members such as beams, columns, and associated connections, all performed in strict compliance with AWS D1.1 standards and project-specific requirements. The scope encompasses all necessary tasks including cutting, welding, bolting, precise alignment, and on-site adjustments to ensure structural integrity and conformity to design specifications. The work must be executed with attention to safety, accuracy, and adherence to industry best practices for structural steel assemblies. This is a subcontract opportunity posted by the Town of Palm Beach in Florida, with a solicitation open for bids until August 20, 2026. The North American Industry Classification System code 332312 identifies the work under structural metal fabrication. While details on the physical location of performance and point of contact are unspecified, interested parties can access the full solicitation through the provided online portal. The contract does not indicate any set-aside status or specific organizational type requirements, leaving it open to qualified subcontractors who meet the technical and regulatory standards outlined.

Town Of Palm Beach

POSTED

about 23 hours ago

DEADLINE

Precision Machining of Structural Fitting

Defense Logistics Agency

POSTED

about 24 hours ago

DEADLINE

Manufacture of External Covering (Ordnance Component)The contract involves the precision fabrication and delivery of a military-grade external covering designated by NSN 1560017234050, specifically for use in defense ordnance systems. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with the work conforming to the NAICS code 332312 which pertains to forgings and stampings manufacturing. The component must meet stringent military specifications to ensure durability, performance, and compatibility within armored or weapon systems under extreme operational conditions. Delivery is expected to support critical defense infrastructure, with no specified set-aside designation indicating open competition among qualified contractors. Performance is not tied to a specific geographic location, as the place of performance is unlisted, allowing the subcontractor flexibility in manufacturing and logistics planning. The contract was posted on July 21, 2026, and can be referenced via the official DIBBS platform using the award number SPE4A726P5325. Although no point of contact or detailed address information is provided, the subcontractor is expected to adhere to all defense procurement standards, quality assurance protocols, and delivery timelines required for sensitive military components. The absence of a solicitation number suggests this award followed direct negotiation or a pre-qualified vendor arrangement within the defense supply chain.

Defense Logistics Agency

POSTED

about 24 hours ago

DEADLINE

Supply of Welding Studs (NSN: 5307003554873)The contract requires the manufacture or supply of 10,260 welding studs that conform to MIL-DTL specifications, ensuring they meet rigorous military performance and quality standards. Each stud must be marked with an Individual Unique Identification (IUID) to enable full traceability throughout the defense supply chain, and packaging must adhere to designated military packaging requirements to safeguard integrity during transport and storage. The items are identified by NSN 5307003554873 and fall under NAICS code 332312, indicating a focus on metal forging and stamping operations. Performance of this contract is designated for New Cumberland, Pennsylvania with a zip code of 17070-5002, and the award will be managed by the ASC Commodities Division under the Department of Defense. The solicitation was posted on July 21, 2026, with a stringent response deadline of July 24, 2026, indicating a rapid procurement cycle typical of urgent military logistics needs. Although the solicitation number is not provided, the contract is classified as a subcontract and operates through the DLA’s DIBBS platform, accessible via the provided UI link. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors regardless of business size or veteran status. The absence of a point of contact suggests reliance on the standard DIBBS procurement process, and the lack of detailed agency address information implies coordination is handled centrally by the ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Precision Fastener Manufacturing and Supply

Defense Logistics Agency

POSTED

about 24 hours ago

DEADLINE

Precision Fabrication of Structural Bracket (NSN 1560014418603)The contract entails the precise fabrication of a structural bracket to meet military specifications, with strict requirements covering material certification, dimensional accuracy, surface treatment, and compliant packaging. The part is identified by the National Stock Number 1560014418603 and falls under the NAICS code 332312 for forged steel and stamped metal product manufacturing. The work must adhere to all applicable defense standards, ensuring the component is suitable for critical military applications. Material sourcing and processing must be documented with full traceability, and the final product must pass rigorous inspection protocols to guarantee conformance. Performance is expected under a subcontract arrangement managed by the Defense Logistics Agency, a division of the Department of Defense. The solicitation was posted on July 21, 2026, and while the place of performance and specific location details are not provided, the work is subject to DoD compliance and oversight. Packaging must protect the bracket during transit and storage while maintaining the integrity of surface treatments and certifications. All deliverables must be fully documented, with no exceptions to quality or specification requirements, ensuring readiness for integration into military systems.

Defense Logistics Agency

POSTED

about 24 hours ago

DEADLINE

Structural Steel Fabrication and ErectionThe contract pertains to the fabrication and on-site erection of structural steel members for buildings, bridges, or towers under a subcontract arrangement. It is classified under NAICS code 332312, specifying the industry as structural steel fabrication. The solicitation was posted on July 21, 2026, with a strict response deadline of July 24, 2026, leaving a narrow window for potential bidders to submit proposals. The contracting organization is identified as the Maritime Supply Chain under the Department of Defense, indicating this work supports federal infrastructure or defense-related facilities. The place of performance is not specified, suggesting the location may vary based on project needs, and no point of contact is listed, which may require interested parties to seek additional details through the provided DIBBS portal link. As a subcontract opportunity, this requires participation through a prime contractor or as a designated subcontractor within an existing framework.

MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Aerospace Seat Component Supply

Defense Logistics Agency

POSTED

about 24 hours ago

DEADLINE

Structural Steel Fabrication and ErectionThe contract entails the fabrication and on-site assembly of structural steel frames and connections for a U.S. Department of Defense project under the agency name ASC SUPPLIER OPER AE AND AF DIV. The work is classified under NAICS code 332312, indicating it pertains to structural steel fabrication and erection services. Performance of the work is required at a designated location in New Cumberland, Pennsylvania, with the zip code 17070-5002. This is a subcontract opportunity, meaning the awarded party will operate under a prime contractor, and no set-aside type has been designated. The solicitation was posted on July 21, 2026, with a strict deadline for responses set for July 24, 2026, leaving a narrow window for submissions. All proposals must align with the technical and logistical demands of on-site steel assembly, and bidders are directed to the DIBBS platform via the provided link for full submission details and requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

SCREW, CLOSE TOLERANCEThis contract is for the procurement of 97 close-tolerance screws with NSN 5305-01-171-3611 under solicitation SPE4A6-26-T-08SX, sourced from approved suppliers including SPS Technologies LLC, Howmet Global Fastening Systems Inc, Huck International Inc, The Boeing Company, Sonic Industries Inc, and Hi-Shear Corporation. All items must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Physical identification markings on bare items must adhere to MIL-STD-130N paragraph 4.1.b(2), in addition to manufacturer logos and material identifiers. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization and unit packaging defined by RP001 DLA Packaging Requirements, and all packaging labeled per contract specifications. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated in the contract, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0. Delivery is required FOB origin within 171 days, with a target ship date of January 17, 2027, and the original required delivery date of December 25, 2026. The quantity variance is strictly zero percent, with no tolerance for over or under shipment. Inspection and acceptance occur at the destination, specifically at DLA Distribution Depot Oklahoma, Tinker AFB. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and may involve casting or forging processes requiring special tooling not held by the government, for which contractors must consult DLA’s Casting and Forging Assistance Program if needed. Freight and transportation instructions reference DLAD Proc Notes C19 and C20. The unit of issue is each (EA), with a unit price of $97.00 totaling $9,409.00, and all documentation must reference the correct ANSI X12 unit of issue as defined by DLA. The contract point of contact is Alexander Sotos, and the solicitation was posted on July 21, 202

ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Supply of Traffic Signal Poles (Manufactured Goods)

Transportation & Mobility

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Vehicular Pneumatic Tire Supply

Rubber Product Manufacturing for Mechanical Use

POSTED

about 24 hours ago

DEADLINE

Fluid Filter Element SupplyThe contract entails the procurement and timely delivery of four military-specification fluid filter elements, identified by NSN 2940014554730 and manufactured by Donaldson Co Inc, to Marine Corps Base Hawaii with a firm deadline of August 4, 2026. All items must fully comply with federal acquisition regulations including DFARS and DPAS priorities, as well as the packaging and labeling standards outlined in MIL-STD-129 to ensure seamless integration into military logistics systems. The contract is structured as a subcontract under the Defense Logistics Agency, operating within the Department of Defense, and falls under the NAICS code 332999 for other fabricated metal product manufacturing. Delivery is mandated to meet exacting defense standards without exception, and the procurement is tracked through the official DIBBS portal under contract references SPE7LX21D0087 and SPE7LX26FB11S.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 24 hours ago

DEADLINE

Wiring Harness Manufacturing and DeliveryThe contract entails the manufacture and delivery of a single military-spec wiring harness designated by NSN 6150016782844, built to meet federal procurement standards for use in defense applications. The work is performed under a subcontract issued by the Defense Logistics Agency within the Department of Defense, with the NAICS code 335931 indicating classification under Other Electrical Equipment and Component Manufacturing. The solicitation was posted on July 21, 2026, and the place of performance and specific delivery location are not detailed, though the contract is tied to a DLA award identified by the reference number SPE4A626V7127. Compliance with all military specifications and federal supply chain requirements is mandatory, and the contract does not include any set-aside provisions for small or disadvantaged businesses.

Current-Carrying Wiring Device Manufacturing

POSTED

about 24 hours ago

DEADLINE

Supply of Military-Specification Gasket (NSN 5330014537148)The contract obligates the supplier to deliver four units of a military-specification metal composite gasket identified by NSN 5330014537148 and part number 3929795, manufactured under CAGE code 15434, with full compliance to DPAS prioritization requirements. These gaskets must be delivered to Lajes Field no later than August 4, 2026, ensuring timely availability for critical defense operations. The contract is classified as a subcontract under NAICS code 332999 and is administered by the Defense Logistics Agency on behalf of the Department of Defense, with all performance and compliance obligations tied directly to the specified technical and logistical parameters. Delivery timelines, material specifications, and regulatory adherence are central to fulfilling contractual obligations, with no flexibility permitted regarding the gasket’s design, certification, or delivery destination.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 24 hours ago

DEADLINE

Supply of Corrosion Preventive Compound for U.S. Navy VesselThe contract entails the supply and delivery of 25 units of military-grade Corrosion Preventive Compound with National Stock Number 8030009381947 to a U.S. Navy vessel operating at FPO AE 09587. The item is classified under NAICS code 325998 and is being procured as a subcontract under the authority of the Defense Logistics Agency, a component of the Department of Defense. The delivery location is a deployed naval vessel, indicating the urgent and operational nature of the requirement, with the compound critical for protecting equipment from corrosion in harsh maritime environments. The contract was posted on July 21, 2026, and is managed through the DLA’s procurement system with the award and delivery contract identifiers SPE8ES24D0005 and SPE8ES26F65UE respectively. While specific details regarding pricing, delivery timelines, and point of contact are not provided, the focus remains solely on meeting the quantity and specification requirements for this authorized military application. The absence of a set-aside designation suggests the contract is open to all qualified suppliers without preferential treatment based on business size or status.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 24 hours ago

DEADLINE

Supply and Delivery of Enamel Paint (NSN 8010013316108)

Paint, Varnish, and Supplies Merchant Wholesalers

POSTED

about 24 hours ago

DEADLINE

Condenser Supply and DeliveryThe contract entails the procurement, packaging, and delivery of six commercial refrigeration condenser units to the DLA Distribution Center in Tracy, California, with all items required to meet strict military packaging and labeling standards to ensure compatibility with defense logistics protocols. The units must be fully compliant with specifications governing durability, transport readiness, and identification under federal military guidelines, even though they are commercial in nature. Performance is governed under a subcontract classified under NAICS code 333414, which corresponds to commercial and industrial refrigeration equipment manufacturing, and the solicitation was posted on July 21, 2026, under the Defense Logistics Agency’s authority as part of the Department of Defense’s supply chain operations. The contract does not specify a set-aside classification, indicating it is open to all eligible contractors without preference based on business size or ownership. Delivery logistics and compliance verification are critical to successful fulfillment, as the units will support essential refrigeration systems within a key military distribution hub.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 24 hours ago

DEADLINE

Epoxy Primer Coating Kit SupplyThe contract involves the supply of a single Epoxy Primer Coating Kit designated by NSN 8010014166557, destined for Fairchild Air Force Base in Washington. Delivery is structured under FOB destination terms, meaning the vendor retains responsibility for the item until it arrives at the specified location, at which point inspection will take place to verify compliance and condition. The contract is classified as a subcontract under the NAICS code 424910, which corresponds to miscellaneous durable goods merchant wholesalers, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 21, 2026, and while no solicitation number is provided, the award is tracked via the contract identification SPE8ES24D0005 with delivery reference SPE8ES26F65PZ. The place of performance and point of contact details are not specified in the provided data.

Farm Supplies Merchant Wholesalers

POSTED

about 24 hours ago

DEADLINE

Power Cable Assembly Manufacturing and SupplyThe contract entails the manufacture and supply of a military-specification power cable assembly identified by NSN 6150016572126, covering the full lifecycle from design validation through final delivery. This includes sourcing certified materials, precision assembly, rigorous quality control procedures, compliant packaging, and timely shipment to meet defense standards. All work must adhere to stringent military specifications and quality assurance protocols to ensure operational reliability under demanding conditions. The contract is classified as a subcontract under NAICS code 335931 and is issued by the Defense Logistics Agency on behalf of the Department of Defense. Although the solicitation number and specific performance location details are not provided, the work is intended to support critical defense logistics needs. The award was posted on July 21, 2026, and the contractual obligations are tied to the defense supply chain through the DIBBS platform, emphasizing strict compliance, traceability, and readiness for military deployment.

Current-Carrying Wiring Device Manufacturing

POSTED

about 24 hours ago

DEADLINE

Commercial Filter Element Supply – Hydraulic Fluid FilterThe contract requires the supply of two military-spec hydraulic fluid filter elements, identified by NSN 2910015522309 and Part No. RE541922, for delivery to Marine Corps Air Station Yuma in Arizona. Each unit must be fully traceable throughout its lifecycle, from manufacturing to final delivery, ensuring compliance with defense-grade accountability standards. The items are to be shipped using the fastest available traceable shipping method to guarantee timely and secure transport. The contract is classified as a subcontract under NAICS code 423840, managed by the Defense Logistics Agency on behalf of the Department of Defense. All delivery and compliance obligations are tied directly to the performance location at Yuma, with no alternate delivery options specified. The procurement is active and pending fulfillment under award number SPE7L126FAV5T.

Industrial Supplies Merchant Wholesalers

POSTED

about 24 hours ago

DEADLINE

Supply of Sealing Compound (NSN 8030008237917)The contract outlines the supply of five units of military-grade sealing compound identified by NSN 8030008237917, manufactured to meet federal specifications for performance and quality standards required by defense applications. The product must be delivered FOB destination to Naval Air Station Jacksonville in Florida, ensuring that the supplier assumes all transportation risks and costs until the goods arrive at the designated military location. This agreement falls under the NAICS code 325520, indicating it pertains to the manufacturing of other chemical products, and is classified as a subcontract within the broader procurement framework of the Department of Defense through the Defense Logistics Agency. Delivery must adhere strictly to federal compliance requirements, and while no solicitation number or set-aside details are provided, the contract’s structure implies direct fulfillment under an existing government procurement initiative to support naval maintenance and operational readiness.

Adhesive Manufacturing

POSTED

about 24 hours ago

DEADLINE

Supply of Military-Grade Enamel Paint (NSN 8010014811141)The contract awards the supply and delivery of 6,000 pints of military-grade enamel paint conforming to NSN 8010014811141 specifications for delivery to Fort Eustis, Virginia. The scope includes complete packaging and transportation services, with all requirements aligned to DPAS priorities and FOB Destination terms, ensuring the contractor assumes responsibility for shipment risks until official receipt at the designated location. The paint must meet stringent defense standards, and the performance is governed under the NAICS code 325510 for paint and coating manufacturing. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is tied to a specific procurement identifier and reflects a formal commitment to support military infrastructure needs. The posted date indicates the contract was made available in 2026, and while the exact delivery timeline and payment terms are not detailed here, compliance with federal procurement regulations, including logistics and quality controls, is mandatory. All deliverables must be properly documented and verified upon arrival at the destination to ensure full contractual fulfillment.

Paint and Coating Manufacturing

POSTED

about 24 hours ago

DEADLINE