Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Component Supply for Strainer Repair Kit

Active

Federal

Response Deadline08/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Fluid Handling Division of the Department of Defense is seeking a subcontractor for the supply of individual components necessary to assemble strainer repair kits. The required materials include seals, gaskets, filters, and metal fittings, all of which must be produced according to strict military specifications. This opportunity is listed under NAICS code 332919 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by August 24, 2026, following the posting date of August 11, 2026.

General Info

DoD seeks subcontractor for military-spec strainer repair kit components in New Cumberland, PA.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-T-332B.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

REPAIR KIT, STRAINER

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 11

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of individual components such as seals, gaskets, filters, and metal fittings required to assemble the repair kit to military specs.

Similar Contracts

Same NAICS industry code

Solicitation # N0010426QNC97

This contract pertains to the procurement of ball valve seats designated as Special Emphasis Level I material, critical to naval shipboard systems where failure could result in catastrophic consequences including loss of life or vessel integrity. The specification requires seats to conform to Naval Sea Systems Command Drawing 803-5001003, with material consisting of Teflon (Polytetrafluoroethylene) meeting precise ASTM-D4894 standards for tensile strength, elongation, melting point, specific gravity, hardness, and water absorption. Each component must be traceable to its certified heat, lot, or batch through unique identifiers marked on the part or via tagging, ensuring alignment with the accompanying mechanical and chemical test reports. All materials must be mercury-free, and no permanent marking is permitted on Teflon seats; instead, they must be tagged with traceability codes linked directly to certification data. The contractor must maintain a certified quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, subject to unannounced government audits and inspections at origin. Government Quality Assurance Representatives will conduct source inspections, and the contractor must facilitate immediate access to facilities, equipment, and records. The contract mandates strict configuration control, requiring all changes to be submitted via Engineering Change Proposals (ECPs) classified as Class I or II, with full documentation of impacts on form, fit, function, logistics, and lifecycle costs. Waivers and deviations, whether critical, major, or minor, require written approval from the Contracting Officer and must be reviewed by the Quality Assurance Representative. Certification of compliance must be submitted for every batch, containing specific data including contract numbers, NSNs, compliance statements, and authorized signatures. All material certification documentation must be submitted through the Wide Area Work Flow system to Portsmouth Naval Shipyard for prior acceptance before shipment, with explicit instructions for routing and notification. Subcontractors must adhere to the same stringent quality requirements, with prime contractors responsible for monitoring and verifying supplier capabilities. The requirement is issued under Emergency Acquisition Flexibilities and is DX-rated under the Defense Priorities and Allocations System, with mandatory compliance with Buy American provisions and small business program representations. The contract also enforces strict documentation handling, data control, and distribution restrictions under OPNAVINST 5510.1, with all technical data managed via the ECDS portal and WAWF for submission, acceptance, and audit readiness.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

48--VALVE,SAFETY RELIEF, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RZA22

The contract pertains to the repair or modification of a SAFETY RELIEF VALVE under solicitation N0010426RZA22, with a final offer submission deadline of 4:00 PM local time on July 24, 2026. Offers must be submitted as a Not-To-Exceed price based on a full repair effort, following a mandatory 90-day teardown and evaluation period during which the contractor must inspect, assess, and provide a Firm-Fixed Price proposal alongside a cost of new price. The work involves refurbishing the valve to meet Drawing V1E10601 and associated specifications, utilizing Government Furnished Property where available, and ensuring full compliance with Commercial Asset Visibility (CAV) reporting requirements. All repairs must account for potential damage, missing parts, and handling issues, with additional cost elements including teardown rates, throughput constraints, and induction expiration dates required in the proposal. The resultant contract will be a DO-rated order under the Defense Priorities and Allocations System and requires bilateral acceptance before execution. Delivery must adhere to a Requested Turnaround Time of 365 days, measured from the physical receipt of the asset at the contractor’s facility as recorded in the CAV system, with final Government inspection and acceptance mandatory within that window. The contractor must ensure compliance with MIL-STD-130 marking, mercury-free requirements, and configuration control, including submission of Engineering Change Proposals for any impact to form, fit, function, or interface. All packaging and preservation must meet MIL-STD-2073, with clear disclosure of any packaging locations and exceptions. Waivers and deviations must be submitted through the ECDS portal and classified as Critical, Major, or Minor, with full justification and logistical impact assessments. Documentation must be submitted electronically via WAWF, and all contractual documents are considered issued upon electronic transmission. The contracting office is NAVSUP Weapon Systems Support in Mechanicsburg, PA, with Amanda Gowdy as the primary point of contact. Small business subcontracting, Buy American, and equal opportunity requirements are incorporated, and all materials must comply with applicable regulations and distribution statements.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

Solicitation # N0010426QNE34

This Level 1 procurement is for the manufacture of critical shipboard valve components, specifically complete stem and disk assemblies for 1 1/2 inch globe valves and stop disks for 1/4 inch valves. Due to the high risk associated with failure in these systems, the materials are designated as Special Emphasis material, requiring strict quality control, heat traceability, and a certificate of compliance. The government will provide specific materials for the manufacture of certain stems, disks, and locknuts. The contract mandates a quality system compliant with ISO 9001 and requires source inspection by the Defense Contract Management Agency prior to shipping, as destination inspection is prohibited. Key technical requirements include specific welding and brazing standards, non-destructive testing, and strict adherence to thread inspection systems. The award includes an option for increased quantity available for 365 days following the award date. All certification data and documentation must be submitted via the Wide Area Workflow system for review and acceptance by the Portsmouth Naval Shipyard.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Solicitation # N00104-26-Q-BQ23

The contract solicitation is for two stop valves identified by NSN 1HM 4820 017117570 PP, issued under solicitation number N00104-26-Q-BQ23 by the Navsup Weapon Systems Support Mech, part of the Department of Defense. The opportunity is a total small business set-aside as defined by FAR 19.5, with a NAICS code of 332919, indicating it is exclusively available to small businesses. The solicitation was posted on May 6, 2026, and responses must be submitted by May 26, 2026, at 9:59 p.m. Eastern Time. All quotations must be submitted via the link provided or by contacting the primary point of contact, Adele H. Lamb, whose email is ADELE.H.LAMB.CIV@US.NAVY.MIL and phone number is 564-230-2521. The office is located in Mechanicsburg, Pennsylvania, 17050-0788, and further details can be accessed by visiting the official website at https://www.neco.navy.mil.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

Solicitation # N0010426QFF30

This solicitation is for the procurement of pipe and tube couplings, specifically 1 1/2 inch and 1/4 inch sizes, to be used in crucial shipboard systems. Due to the critical nature of these components, the material is designated as Special Emphasis material, requiring strict adherence to quality control procedures, including a one-year warranty and a mandatory certificate of compliance. The contract specifies the use of Alloy UNS C92200 or C90300 and prohibits welding on these materials. All items must undergo hydrostatic testing and meet precise pressure and time tolerances. The award will be made at the CLIN level, potentially resulting in multiple awards to different vendors. Eligible offerors must maintain a documented quality system compliant with ISO-9001 and provide certification data via the Wide Area Workflow (WAWF) for review and acceptance by the Portsmouth Naval Shipyard prior to shipment. This is a DO rated order certified for national defense use under the Defense Priorities and Allocations System. Final delivery of material is required within 365 days of the contract's effective date, with certification data submitted 20 days before the scheduled delivery.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 2 months

BONNET ASSEMBLY

Solicitation # N0010426QFE60

The contract pertains to the procurement of a Bonnet Assembly designated as SPECIAL EMPHASIS material due to its critical role in a shipboard system, where failure could lead to catastrophic consequences including loss of life or the vessel. The item must strictly conform to NAVSHIPS drawing 803-2177525 and associated material specifications including ASTM-A105 or MIL-S-24093, with mandatory phosphate coating and adherence to specific welding, heat treatment, and threading standards. Comprehensive quality assurance protocols are enforced, requiring full traceability from raw material through final assembly, with each component bearing a permanent, legible traceability mark linked to certification data. Chemical and mechanical test reports must accompany every lot, verified by 100% inspection, and must be authenticated using controlled electronic signatures that are unique to the individual and cannot be altered post-signature. All certifications, including weld procedures and qualification data, must be submitted for government approval prior to production, and any changes or deviations require formal, classified waiver requests reviewed and approved by the Contracting Officer. Delivery is contingent upon prior review and acceptance of all certification documentation via the Wide Area Work Flow (WAWF) system, with shipments restricted to N50286 and notifications sent to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL; no material may be shipped without formal acceptance. Final delivery must occur within 365 days of contract effective date, and early or incremental deliveries are permitted at no additional cost. The contract mandates ISO-9001 or MIL-I-45208 quality systems with embedded calibration controls per ISO-10012 or ANSI-Z540.3, and all subcontractors must flow down identical requirements. Government inspection at source is required, with the Defense Contract Management Agency overseeing nondestructive testing and quality verification. The material must be mercury-free, and any use of foreign certification requires conversion to U.S. units with authorized signoff. The procurement is a total small business set-aside, subject to DPAS priority rating for national defense, and governed by Buy American regulations. Configuration control is strictly maintained, with Engineering Change Proposals required for any design modifications affecting form, fit, function, or interface. All documentation must be submitted electronically in standardized formats, and access to proprietary Navy drawings requires prior authorization through SAM.gov.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

REPAIR MODULE,STRAI

Solicitation # N0010426QJC11

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

PARTS KIT,BALL VALV

Solicitation # N0010426QND00

This contract pertains to the supply of a special emphasis parts kit for a size 10 inch ball valve, consisting of a ball and two mating seats, to be used in a critical shipboard system where failure could lead to catastrophic consequences including loss of life or vessel. All components must strictly comply with Naval Ship Systems Drawings 4385051 and 4384678, along with referenced specifications including SAE AMS 6931 for the ball material and Dupont AF DE588 for the seats, with exacting mechanical and chemical property requirements. The ball must undergo a precise surface finish process to achieve a matte dull appearance with a surface roughness of 12 to 16 RHR, and spherical surface waviness must not exceed 0.0005 inches per inch of surface. Seat materials are subject to stringent testing for specific gravity, melting point, tensile strength, water absorption, hardness, and Teflon fiber content, with detailed procedures for dimensional stability testing using mineral oil baths and strict limits on inclusions. All materials must be traceable from raw stock to finished part through unique heat, lot, or batch markings permanently applied in accordance with MIL-STD-792, with traceability maintained through every manufacturing and subcontracting step. The contract mandates a fully documented quality system compliant with ISO-9001 and either ISO-10012 or ANSI-Z540.3 aligned with ISO-17025, or alternatively MIL-I-45208 with MIL-STD-45662. Government Quality Assurance Representatives will perform on-site inspections, and all suppliers must maintain records of all inspections, tests, and nonconformances, with 100% verification of certifications and traceability data. Welding, brazing, and hardfacing operations must follow S9074-AQ-GIB-010/248 or S9074-AR-GIB-010A/278, with all procedures and qualifications submitted and approved prior to work. Certification of compliance is required for all items and must include positive, unqualified statements of conformance, listing all tests performed, with full traceability to individual parts via unique identifiers. Material certification reports must show actual test results, prohibit transcription, and cannot include disclaimers. Shipping is prohibited until certification data is submitted via WAWF to Portsmouth Naval Shipyard with designated recipients and

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

Solicitation # N0010426QZB16

This contract is a high-priority procurement under the Navy’s Level One program for a CAP, VALVE item designated as Special Emphasis Material, where failure could result in catastrophic consequences including loss of life, shipboard system failure, or loss of the vessel. The item must comply with stringent quality and traceability requirements mandated by federal law, DoD policy, and the Defense Priorities and Allocation System, and is rated DO for national defense priority. The material must be manufactured to Carleton Technologies drawing 2432-0001-1 using QQ-N-281 Class A material and must undergo oxygen cleaning in accordance with MIL-STD-1330. All components require Level I Source Certification, with each part uniquely traceable from raw material through fabrication to final delivery via heat-lot or traceability numbers permanently marked in compliance with MIL-STD-792, even when surface area is too small for direct marking, in which case a durable tag must be affixed. A robust quality system compliant with ISO-9001 and ISO-10012 or ANSI-Z540.3 with ISO-17025 is mandatory, with MIL-I-45208 and MIL-STD-45662 accepted as alternatives. All welds, brazing, and fabrication must adhere to S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, requiring prior submission and approval of welding procedures and qualification data, with electronic submissions preferred in PDF format. Full documentation of chemical and mechanical properties, nondestructive testing, and cleaning procedures must be certified with electronic signatures, which are treated as legally equivalent to handwritten signatures under strict control protocols. All certifications must be 100% verified for completeness and accuracy, with zero-defect acceptance criteria applying to final inspection regardless of lot size, and small lots below eight units requiring 100% inspection. The Contractor must maintain traceability through all subcontracted operations and ensure suppliers meet equivalent quality standards through rigorous evaluation and audit processes. Government source inspection is required, and shipping must be coordinated via Wide Area Work Flow using prescribed codes, with material held until explicit acceptance is granted by Portsmouth Naval Shipyard. The item must be shipped FOB destination, with delivery required within 200 days, and all packaging and marking must follow MIL-STD-2073-1 and

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

Manufacture of Pressure Switches (Part Number 0001S00000052)

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

ADAPTER BUSHING

Solicitation # SPE7M0-26-T-038B

This contract, identified as SPE7M0-26-T-038B, is for the procurement of one adapter bushing with NSN 4730015394064 and part number 10009-5 from Panova Inc. The order is managed by the Department of Defense under the Maritime Supply Chain ESOC Buys. Delivery is required within five days after the order, with a required delivery date of August 10, 2026. The shipment is designated as an NMCS priority and is to be delivered FOB Origin to the USALRCTR Bavaria in Vilseck, Germany. The supplier must adhere to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance. Inspection and acceptance will take place at the destination.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-190J

This solicitation, issued by the Defense Logistics Agency under contract number SPE7MC-26-T-190J, is for the procurement of one valve disk, identified by NSN 4820-01-501-1418. The delivery is required within 20 days after receipt of order, with performance located in Mechanicsburg. The acquisition is open to full and open competition and is categorized under NAICS code 332919. The contract mandates strict adherence to DLA packaging and quality requirements, including the prohibition of Class I ozone-depleting chemicals. Significant security and compliance obligations are in place, including CMMC Level 2 certification, the protection of covered defense information, and strict export controls under ITAR and EAR regulations. Access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Metal Tube Assembly Supply

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

FITTING, LUBRICATION

Solicitation # SPE7M3-26-T-8188

This contract is for the procurement of one lubrication fitting, identified by NSN 4730011729119 and part number 41002974 from PTI Technologies Inc. The order is managed under solicitation SPE7M3-26-T-8188 by the Department of Defense Fluid Handling Division, with a required delivery date of August 14, 2026, and a delivery window of 20 days after receipt of order. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for delivery preparation and MIL-STD-129 for marking. Key compliance requirements include CMMC Level 2 self-assessment and the protection of covered defense information. The item is to be shipped FOB Origin to the Taiwan Army Zuo-Ying Ammunition Sub in Kaohsiung City, Taiwan.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

ADAPTER, MECHANICAL

Solicitation # SPE7M4-26-T-332Y

This contract is a solicitation for the procurement of one mechanical adapter, identified by NSN 4940016433914 and Tifco Industries part number 79927. The order is issued by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-332Y. Delivery is required within 20 days after the order is received, with an original required delivery date of August 10, 2026. The agreement specifies that shipping must be handled via traceable means to the Distribution Management Office at Camp Leune, North Carolina, and explicitly prohibits the use of parcel post. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements for procurement. Technical and quality standards are governed by the DLA Master List, and the contract stipulates a zero percent quantity variance for the order.

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

ADAPTER, STRAIGHT, TU

Solicitation # SPE7M3-26-T-8191

Contract SPE7M3-26-T-8191 is a solicitation from the Department of Defense Fluid Handling Division for the procurement of straight tube adapters, identified by NSN 4730016446201. The contract consists of four separate line items, each for a quantity of one unit, to be delivered to different naval vessels including the USS St Louis, USS Cooperstown, USS Marinette, and USS Minneapolis Saint Paul. Delivery is required within 20 days after receipt of order, with required delivery dates set for August 10 and 11, 2026. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and requires shipment via the fastest traceable means. Environmental compliance is critical, as the contract prohibits the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except in specific authorized cases. Inspection and acceptance will take place at the destination, with a zero percent quantity variance allowed.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-333A

This contract is for the procurement of 453 feet of metallic carbon steel tubing (1020) with a 1.000 inch outer diameter and 0.095 inch wall thickness. The tubing must be provided in random lengths between 12 and 24 feet and manufactured according to electric-resistance-welded carbon and alloy steel mechanical tubing specifications, specifically ASTM A513-06B. The order allows for a quantity variance of plus or minus 10 percent and requires delivery to DLA Distribution Red River in Texarkana, Texas, with a required delivery date of February 16, 2027. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The supplier must provide metal certifications via CDRL-METALSCERT and adhere to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. This procurement is conducted under full and open competition and incorporates technical and quality requirements from the DLA Master List.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 2 hours ago

DEADLINE

PACKING MATERIAL

Solicitation # SPE7M4-26-T-333K

This solicitation, issued by the Department of Defense Fluid Handling Division under number SPE7M4-26-T-333K, is for the procurement of 13 units of packing material identified by NSN 5330-01-011-5048. The contract requires delivery within 161 days after order and specifies that performance will take place in Tracy, California. The procurement is governed by DLA master technical and quality requirements, including specific standards for packaging, origin inspection, and identification marking of U.S. military property per MIL-STD-130N. The material is subject to strict environmental and safety constraints, explicitly prohibiting the use of asbestos and Class I ozone depleting chemicals. There is a general ban on the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional components like batteries or sensors as specified by NAVSEA. Additionally, the items have no shelf life requirement and must comply with covered defense information protocols.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE7M3-26-T-8192

This contract is a solicitation for the procurement of ten brass square head pipe plugs, identified by NSN 4730-01-663-3959. The requirement specifies that part number 0737A1000-1 is discontinued, and only part number 0737A1000-2 remains active. Approved sources for this source-controlled drawing include Parker-Hannifin Corporation and Anderson Metals Corp Inc. The items must adhere to the technical specifications of the cited drawing and the DLA Master List of Technical and Quality Requirements. Delivery is required within 20 days after order, with the shipment destined for Fort Bliss, Texas. Packaging must comply with ASTM D3951 and MIL-STD-129, and the contract authorizes Certificate of Conformance procedures per FAR 52.246-15. The procurement is managed by the Department of Defense Fluid Handling Division under solicitation number SPE7M3-26-T-8192.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

TUBING, NONMETALLIC

Solicitation # SPE7M4-26-T-332X

This contract is for the procurement of nonmetallic tubing under solicitation number SPE7M4-26-T-332X for the Department of Defense Fluid Handling Division. The requirement consists of 8 feet of tubing, identified by NSN 4720-01-583-0498, with a quantity variance allowed of plus 10 percent and minus 0 percent. Delivery is required within 10 days after order, with the final destination and inspection point located at Fort Hood, Texas. The supplier must adhere to DLA packaging requirements, specifically RP001 and MIL-STD-129, and ensure packaging aligns with ASTM D3951. Technical and quality requirements are governed by the DLA Master List, which takes precedence over ASTM standards. The contract specifies that any government identification must be removed from non-accepted supplies and identifies associated part numbers from General Dynamics Land Systems and NP Aerospace Limited.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 2 hours ago

DEADLINE

VALVE, LINEAR, DIRECT

Solicitation # SPE7M4-26-T-332V

This contract is a solicitation issued by the Department of Defense Fluid Handling Division for the procurement of one linear direct valve. The required item is identified by NSN 4820015186604 and corresponds to Eaton Aerospace part numbers 20739007 and DG4V3S6CHMFWB5-60. The delivery is specified as FOB Destination with a required delivery date of August 10, 2026, and a delivery window of 20 days. The shipment is destined for the USS New Orleans LPD 18. Strict adherence to DLA packaging requirements is mandatory, specifically referencing ASTM D3951 and MIL-STD-129 for marking and labeling. The contract incorporates technical and quality requirements from the DLA Master List, and it explicitly requires the removal of government identification from any non-accepted supplies.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

HOSE ASSEMBLY, NONME

Solicitation # SPE7M4-26-T-332S

This contract is for the procurement of three nonmetallic hose assemblies, identified by NSN 4720013636796 and Senior Operations LLC part number 353-016-0088-125, for use in B-2 aircraft. The order is managed by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-332S, with a required delivery date of August 10, 2026, and a delivery window of 20 days. The items must be shipped FOB Origin to Whiteman AFB in Missouri using traceable means. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements RP001. Inspection and acceptance will take place at the destination, and the contract incorporates specific technical and quality requirements as defined in the DLA Master List.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

TEE-Y, DRAINAGE PIPE

Solicitation # SPE7M3-26-T-8194

This contract is for the procurement of one TEE-Y drainage pipe, identified by NSN 4730200114564 and part number 23-0681 from Mobile Climate Control Industries. The solicitation, issued by the Department of Defense Fluid Handling Division under number SPE7M3-26-T-8194, requires delivery within 20 days. The item is to be delivered FOB Origin, with inspection and acceptance occurring at the destination. The shipment is destined for the Distribution Management Office at Camp Kinser, Japan. Strict adherence to DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards is mandatory. The contract incorporates specific technical and quality requirements as outlined in the DLA Master List, with an original required delivery date of July 31, 2026.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE7M3-26-T-8196

This contract is for the procurement of one hose mender, identified by NSN 4730017002814 and part number A-A-52403-12. The agreement is subject to full and open competition and requires adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging, configuration change management, and the removal of government identification from non-accepted supplies. Delivery is required within 10 days after receipt of the order, with a final required delivery date of June 5, 2026. The contract mandates strict environmental compliance, prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except in specific authorized cases. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA procurement requirements. The item is destined for the Royal Jordanian Air Force at Muwaffaq Salti AB, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE