This Sources Sought opportunity from Department Of Defense was posted on August 25, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Compressor Housing

Closed

FD20302601035Federal

Submission Closed09/25/2026, 04:59:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

DIBBS

Supply of Spacer, Sleeve (NSN 5365-01-034-2519)This subcontract, set aside for total small businesses under NAICS code 336413, involves the manufacture and delivery of 124,000 sleeve spacers, identified as NSN 5365-01-034-2519, for the Defense Logistics Agency Weapons Support ASC. The selected provider will supply these units to DLA Depots, ensuring all items are produced and delivered according to strict military and industry standards. Technical requirements include sampling per MIL-STD-1916 or ASQ H1331, packaging according to ASTM D3951 and RP001, and marking and labeling in compliance with MIL-STD-129. Additionally, the contractor must maintain CMMC Level 1 certification and adhere to all ITAR and EAR export control regulations to ensure the security and legality of the supply chain.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Antenna-430 ADF Repair and Overhaul ServicesThis subcontract involves providing repair and overhaul services for the Antenna-430 ADF, A1, supporting prime contractors on projects for the Department of Defense Navsup Weapon Systems Support. The scope of work includes the complete teardown, evaluation, and modification of units, where defective components are identified and replaced based on approved repair manual limits. All work must be performed using specialized avionics testing equipment and must strictly adhere to IPC/EIAJ-STD-001C soldering standards to ensure units are delivered in Ready for Issue condition. The opportunity is categorized under NAICS code 336413 and was posted on October 20, 2026, with a response deadline of November 19, 2026. This technical engagement focuses on maintaining critical aviation components to meet rigorous military specifications and operational readiness requirements.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Component SupplyThis subcontract, titled Aircraft Wheel Component Supply, involves providing replacement components, seals, and hardware to prime contractors supporting NAVSUP Weapon Systems Support aircraft wheel overhaul projects. The scope specifically focuses on delivering certified aircraft-grade replacement parts and aviation-grade alloys that meet approved repair manual specifications for NSN 1630-14-597-7780. Managed under the Department of Defense, the contract requires strict adherence to the Buy American Act and Trade Agreements certifications. Additionally, the supplier is responsible for providing Material Safety Data Sheets for any hazardous materials delivered. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, falling under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Half Repair and Overhaul ServicesThis subcontract for Aircraft Wheel Half Repair and Overhaul Services supports NAVSUP Weapon Systems Support projects within the Department of Defense. The scope of work involves the comprehensive teardown, evaluation, repair, and overhaul of aircraft wheel halves under NSN 1630-14-597-7780. The selected provider will be responsible for disassembling units, cleaning and inspecting parts according to approved manuals, replacing defective components, and reassembling the units using specialized fixtures, jigs, and test equipment. All deliverables must be provided in Ready for Issue condition and must strictly comply with MIL-STD-130 and MIL-STD-129 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Flight Model Solar Array Wings Supply

National Aeronautics And Space Administration

POSTED

DEADLINE

Component Evaluation and InspectionThis subcontract, titled Component Evaluation and Inspection, is issued by the Navsup Weapon Systems Support under the Department of Defense. The project involves performing technical evaluations and inspections of spoiler assemblies for prime contractors working on Department of the Navy aerospace projects. The primary objective is to identify structural cracks, corrosion, or fatigue through the application of Non-Destructive Testing methods, specifically X-ray, Ultrasonic, and Dye Penetrant techniques. Qualified providers must hold ASNT or equivalent aerospace inspection certifications to ensure technical compliance. The final deliverable for this engagement is a detailed evaluation report that includes specific recommended repair actions. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, and falls under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Spoiler Assembly Component SupplyThis subcontract, titled Spoiler Assembly Component Supply, is issued by Navsup Weapon Systems Support under the Department of Defense. The agreement focuses on the procurement of aerospace-grade replacement parts, fasteners, and sub-components necessary for the repair of NSN 1680-01-650-9016. The supplier is responsible for sourcing OEM or approved equivalent parts that match Reference Number 81205 113A4600-406 to support prime contractors on Department of the Navy aerospace repair projects. To ensure regulatory and origin compliance, the provider must furnish Buy American and Trade Agreements certifications. The contract falls under NAICS code 336413, with a posting date of October 20, 2026, and a response deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Spoiler Assembly Teardown and RepairThis subcontract, managed by Navsup Weapon Systems Support for the Department of Defense, involves the teardown, evaluation, and repair of NRP Spoiler Assemblies (NSN 1680-01-650-9016) for Department of the Navy aerospace projects. The selected contractor will be responsible for disassembling the units, conducting technical evaluations for wear and damage, and performing necessary repairs or modifications in strict accordance with OEM or military specifications. The work requires the use of precision measuring instruments and aerospace-grade tooling to ensure the delivery of certified, serviceable assemblies. Additionally, the contractor must possess CAV RP reporting capabilities to meet the administrative requirements of the project. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Skin Component Supplier (NSN 1560-01-723-6222)This subcontract involves the supply of aircraft skin components for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The selected supplier is responsible for manufacturing or sourcing parts that strictly adhere to NSN 1RD 1560-01-723-6222 QF specifications. All deliverables must be packaged according to MIL-STD-2073 and marked in accordance with MIL-STD-129, with final delivery directed to shipping point W25G1U. To ensure quality and precision, the contractor must maintain ISO 9001 or SAE AS9100 certification. Additionally, all equipment used in the process must be calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413 and requires responses to be submitted by November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Supply of Attitude Indicators (NSN 6610-01-432-3229)This subcontract, issued by the Department of Defense through the Pa DLA Aviation At Philadelphia, involves the supply of Attitude Indicators under NSN 6610-01-432-3229 for NAVAIR aviation component projects. The selected provider is responsible for manufacturing or procuring units that strictly adhere to TDP Version 003, ensuring that all hardware, software, and firmware are fully aligned with the established equipment baseline. The contractor must ensure all units are marked according to MIL-STD-130 and packaged in compliance with MIL-STD-2073. To qualify, the provider must maintain ISO 9001 certification and demonstrate compliance with DFARS 252.204-7012. The final deliverable consists of the physical indicator units, fully marked and packaged for delivery.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Fuel Relief Valve Teardown and RepairThis subcontract with Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of Fuel Relief Valves under NSN 7RH 2915-01-201-6004 EK. The scope of work includes conducting wear analysis, implementing approved repair procedures, and performing necessary environmental and quality conformance testing to deliver a fully certified, repaired valve for US Navy aviation projects. The contractor must maintain ISO 9001 or SAE AS9100 certification and utilize measuring and test equipment calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aviation Component Parts SupplierThis subcontract, managed by Navsup Weapon Systems Support under the Department of Defense, involves the supply of replacement parts, seals, and hardware for Air Pressure Regulators, specifically part number 166001039791. These components are intended for prime contractors working on Department of the Navy aviation projects. The supplier is required to provide OEM or approved equivalent aviation-grade seals and valves, ensuring all materials meet strict quality and origin standards. Key deliverables include the physical parts along with necessary quality certifications in compliance with Trade Agreements and hazardous materials modal regulations. The opportunity was posted on October 20, 2026, with a response deadline of November 20, 2026. The contract falls under NAICS code 336413, focusing on the specialized procurement of aviation component parts.

Navsup Weapon Systems Support

POSTED

about 7 hours ago

DEADLINE

in about 1 month

AI Contract Overview

The Department of the Air Force, through the 423rd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research via a Sources Sought Synopsis to identify potential providers for the new manufacture of Compressor Housings for the B-1 platform. The requirement involves the procurement of four units with part number 751607-2-2 and national stock number 1660-01-207-5331. This effort is strictly for new spares procurement and does not include repair requirements. Potential sources must be capable of providing all labor, materials, and equipment for manufacturing, including component procurement, inspection, testing, preservation, packaging, and shipping. This is not a formal solicitation, and no funds are currently available for the effort. The government is using this process to determine the best acquisition strategy and evaluate whether the requirement should be a small business set-aside under NAICS code 336413. Interested vendors must submit their business information, including CAGE code, UEI, and ownership status, by September 24, 2026. Additionally, qualified sources are required to complete a Source Approval Request package and submit it electronically via DoD SAFE. Technical requirements are governed by the Qualification Requirements and Engineering Data List, with official qualification details available on sam.gov under the keyword MQR-PSD-1.

General Info

Air Force market research for four B-1 platform compressor housings, NSN 1660-01-207-5331.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

OK, USA

Set-Aside

NONE

Documents

FD20302601035 Sources Sought – Compressor Housing

sources-sought

High

FD20302601035 Sources Sought for Compressor Housing

sources-sought

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedFeb 5

Sources Sought

Notice updatedAug 25

Response deadline changed from Mar 5, 2026 to Sep 25, 2026. The notice description changed. The point of contact changed.

Response DeadlineSep 25

Deadline has passed

Submission Closed

09/25/2026, 04:59:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Contacts1 person available

OfficeTINKER AFB, OK, 73145-3070, USA

Organization / AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Office AddressTINKER AFB, OK, 73145-3070, USA

Contacts

Workflow

contact@example.gov

Full Description

Spares Procurement of: Compressor Housing

Platform: B-1

NSN: 1660-01-207-5331
P/N: 751607-2-2

Notice ID (PR#): FD20302601035

AMC/AMSC: 1C

Department/Ind. Agency: DEPT OF DEFENSE
Sub-tier: DEPT OF THE AIR FORCE
Major Command: AFMC
Sub Command: AIR FORCE SUSTAINMENT CENTER
Office: 423rd SCMS

GENERAL INFORMATION

• Contract Opportunity Type: Sources Sought (Original)
• All Dates/Times are: (UTC-05:00) CENTRAL STANDARD TIME, CHICAGO, USA
• Please submit responses by: 9/24/26

Classification

• Federal Stock Class (manufacture): 1660
• NAICS Code: 336413

The proposed North American Industry Classification Systems (NAICS) Code has a corresponding Size Standard of 1,250 employees. The Government is interested in all businesses to include, Large Business, Small Business, Small Disadvantaged Businesses 8(a)s, Service-Disabled Veteran-Owned Small Businesses, Hubzone Businesses, and Women-Owned Small Businesses.

• Place of Performance: Tinker AFB, OK 73145 USA

CONTACT INFORMATION

Organization: 423rd SCMS
Workflow Email: 423scms.guea.workflow@us.af.mil
SEND RESPONSES HERE

PURPOSE/DESCRIPTION

INTERESTED SOURCES MUST SELECT “ADD ME TO INTERESTED VENDORS” BUTTON ABOVE OR BELOW TO BE CONSIDERED PARTICIPANTS IN THIS MARKET RESEARCH EFFORT.

THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUESTS FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE.

This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the United States Air Force to identify potential Spares Procurement sources for the requirements identified below and to determine if this effort can be competitive or a Small Business Set-Aside. The Government may consider breaking the requirement out by airframe. This is not a Request for Proposal (or solicitation) or an indication that a contractual commitment will exist for this requirement. The government does not intend to award a contract on the basis of this market research. No funds are available to fund the information solicited.

The Government will use the information gathered through publication of this SSS to determine the best acquisition strategy for this requirement. The Government is interested in all potential sources including Small Businesses, Small Disadvantaged Businesses, 8(a) businesses, Service-Disabled Veteran-Owned Small Businesses, HUBZone Small Businesses, Women-Owned Small Businesses, etc. The 423rd SCMS Supply Chain Management Squadron located at Tinker Air Force Base is requesting information, pursuant to FAR PART 10, in support of Market Research to identify potential sources for the Spares Procurement of the NSN(s) listed below.

REQUIREMENTS

Potential sources shall be capable of furnishing all labor, materials, facilities and equipment required to accomplish the new manufacture of the item(s) listed below. Generally, this entails the procurement/manufacture of component parts, inspection, testing, preservation/packaging, and shipping. Additionally, potential sources may be responsible for supply chain management, logistics planning, forecasting production requirements, long-lead time parts procurement, diminishing manufacturing sources and material shortage issues, and shipping serviceable assets. The unit prices will be established at the time of a contract award for the item(s) listed below. Potential sources may be responsible for nonrecurring engineering costs associated with becoming an approved source. The spares requirement for this effort is identified below:

Part Number: 751607-2-2
NSN: 1660-01-207-5331
Estimated Spares Requirement: 4ea

THIS IS A NEW SPARES BUY AND DOES NOT HAVE A REPAIR REQUIREMENT