Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

COMPRESSOR UNIT, REC

Active
SPE7M1-26-T-237JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of three reciprocating compressor units, identified by NSN 4310-01-211-4963 and part number CU4963 from NETEX INDUSTRIES, with a total quantity of three units to be delivered within 20 days under FOB destination terms. All deliveries must comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging methods, materials, and levels, with units packed in single unit containers and marked in accordance with MIL-STD-129 and MIL-STD-130 for government identification. The item is designated as a critical application item, and no variance in quantity is permitted—zero percent plus or minus. Inspection and acceptance occur at the destination, and the contract references the DLA Master List of Technical and Quality Requirements for all technical and quality standards identified by R or I numbers. The delivery destination is APO AP 96278-2069, while the freight shipping address is OSAN AB, South Korea. The solicitation number is SPE7M1-26-T-237J, with a response deadline of August 10, 2026, and an original required delivery date of July 27, 2026. The point of contact is Michael Reese at DLA, and all items must be procured using the DoD authorized unit of issue and comply with applicable transportation and logistics directives including DLAD procedural notes C19 and C20.

General Info

Three reciprocating compressors delivered FOB destination by July 27, 2026, per DLA packaging and marking standards.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

UNIT 2069, APO, AP, 96278-2069, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Michael Reese
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COMPRESSOR UNIT,REC
COMPRESSOR UNIT, RECIPROCATING.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
PHYSICAL IDENTIFICATION IAW MIL-STD-130
IS REQUIRED.
CRITICAL APPLICATION ITEM
NETEX INDUSTRIES 0WAG0 P/N CU4963
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017659099 0001 EA 3.000
NSN/MATERIAL:4310012114963
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:C
UNIT CONT:10 OPI:O
PACK CODE:Q PACKING LEVEL: B
SPE7M1-26-T-237J
SECTION B
PR: 7017659099 PRLI: 0001 CONT’D
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB5294
FB5294 51 LRS LGRDDC
UNIT 2069
APO AP 96278-2069
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
FB5294
FB5294 51 LRS LGRDDC
CP 011 82 505 784 5085
OSAN AB BLDG 824 SINJANG DONG
PYEONGTAEK CITY 17759
KR
M/F: (TCN) FB529462030323
RDD:
PROJ: TP 3
SUPP ADD: YBZ333 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 10
DIC: A01 DIST: 01 ADV: FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/27/2026
SPE7M1-26-T-237J NSN/Part Number: 4310-01-211-4963 Quantity: 3 EA Purchase Request: 7017659099QTY: 3 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, METAL
Solicitation # SPE7L4-26-T-5854
The contract is for a single unit of a metal hose assembly with NSN 4720-01-234-3003 and part number 114B355, supplied by STEWART & STEVENSON POWER PRODUCTS LLC. Delivery is required within five days of award, with FOB origin terms, and no variance in quantity is allowed. Inspection and acceptance occur at the origin point, and the item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, containment methods, and marking standards. The product must not contain or come into direct contact with mercury or mercury-containing compounds except for specified functional uses in batteries, lighting, instruments, weapon systems, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The delivery destination is the General Depot of Naval Supplies in Kaohsiung, Taiwan, and shipment must follow DLA transportation guidelines, with the freight forwarder and shipping details governed by DLAD PROC NOTES C19 and C20. The contract is issued under solicitation SPE7L4-26-T-5854, with an original required delivery date of July 31, 2026, and the supplier must adhere to all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
SPACER, REACTION, IGNITI
Solicitation # SPE4A7-26-T-600N
The contract pertains to the procurement of four units of SPACER, REACTION, IGNITION with NSN 5365-01-230-3095, under solicitation SPE4A7-26-T-600N, with a response deadline of August 6, 2026, and a required delivery within five days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting disclosure of associated technical data to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to such controlled data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and DLA questionnaire, and have received formal authorization from DLA. Packaging must adhere to DLA standards, inspection and acceptance occur at the manufacturer’s origin, and non-accepted items must have government identification removed. Covered defense information applies, and tailored higher-level quality requirements are enforced for both manufacturers and non-manufacturers. The solicitation is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Christian Roberson as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SPACER, SPECIAL SHAPED
Solicitation # SPE4A7-26-T-599N
The contract is for 56 special-shaped spacers identified by NSN 5365-01-588-4009 under solicitation SPE4A7-26-T-599N, with a delivery requirement of 171 days after order. The item is classified as a commercial item, allowing the use of a Certificate of Conformance unless restricted by a Quality Assurance Letter of Instruction. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are to be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in the sample lot unless otherwise stated. The contractor must comply with DLA packaging requirements and technical quality specifications referenced in the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. The item is subject to export control under ITAR or EAR, restricting technical data sharing with foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data requires JCP certification, completion of DOD export training, and DLA approval. The contractor must also maintain CMMC Level 2 certification through a certified third-party assessment organization. Physical identification of the product must meet specified marking requirements, and covered defense information protocols are enforced. The contract is managed by the Department of Defense through the ASC Supplier Operations AE and AF Division, with performance located in New Cumberland, PA, and primary point of contact is Tamera Greene.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
Federal
Fixed Canopy Manufacturing and AssemblyThe contract entails the fabrication, assembly, and rigorous quality assurance of 85 fixed canopies identified by NSN 1560-01-708-2761, requiring full compliance with both military specifications and ISO standards to ensure operational readiness and durability under demanding conditions. The work must be performed at the designated place of performance in Chambersburg, Pennsylvania, with all deliverables subject to stringent inspection and certification protocols to meet defense-grade requirements. This is a subcontract opportunity exclusively reserved for SBA-certified Women-Owned Small Businesses under the WOSB Sole Source Program, ensuring eligibility is restricted to businesses that meet the criteria outlined in FAR 19.15. The North American Industry Classification System code 332999 applies, covering other fabricated metal product manufacturing and reflects the specialized nature of the fabrication process. The solicitation was posted on July 29, 2026, and responses are due by August 28, 2026, at 9:00 p.m. Eastern Time, with no formal solicitation number issued. The contracting activity is managed under the Department of Defense through the DLA Aviation office in Huntsville, indicating direct support to military logistics and aviation systems. Although no point of contact is listed, interested parties must submit proposals through the SAM.gov platform using the provided link, and all technical, quality, and delivery requirements must be fully addressed to be considered responsive. The contract requires full adherence to federal acquisition regulations and quality control processes, with performance expectations aligned to the Department of Defense’s standards for sustainment and operational use.
Al DLA Aviation At Huntsville

POSTED

about 15 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332999
New
Federal
Fluid Pressure Filter SupplyThe contract is for the supply of a fluid pressure filter identified by NSN 4730-01-546-8847, required to meet established military filtration standards. It is structured as a subcontract under a Small Business Set Aside designation, fully reserved for small businesses, with the NAICS code 332999 indicating it falls under other miscellaneous manufacturing. The solicitation was posted on July 29, 2026, and responses must be submitted by August 4, 2026, at 7:00 PM. The contracting activity is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, under the Department of Defense, and performance is expected to occur under unspecified geographic parameters. There is no publicly listed point of contact or detailed address for the place of performance, and the opportunity is accessible via a SAM.gov portal link for further submission details.
Navsup Flt Logistics Ctr Puget Sound

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
Federal
Precision Machining of Aerospace Fuel Control HousingThe contract entails the precision manufacturing of a fuel control housing designated as NSN 2910-01-327-4181 and part number 360150-17, specifically for use in the BLACKHAWK system. The scope encompasses the full production cycle including sourcing of raw materials, computer numerical control machining, heat treatment, surface finishing, rigorous inspection protocols, and final delivery to meet stringent aerospace standards. All work must adhere to exacting technical specifications to ensure operational reliability in high-performance aviation environments. The effort is classified as a subcontract under NAICS code 332999 and is being managed by the Department of Defense through the DLA Aviation office in Huntsville. The solicitation was posted on July 29, 2026, with a firm deadline for responses on August 2, 2026, at 10:00 PM Eastern Time. Failure to meet deadlines or specifications will result in disqualification.
Al DLA Aviation At Huntsville

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
Federal
UID Marking & Asset Tagging ServicesThe contract requires the application of permanent, scannable unique identification markings to engines in strict compliance with DFARS 252.211-7003 and MIL-STD-130 standards. This includes the precise application of data matrix codes that meet all regulatory specifications for durability, legibility, and machine readability, along with full support for registry submission to ensure each engine is properly documented in the DoD Unique Identity system. The work must be performed to ensure traceability and accountability throughout the asset lifecycle, with all markings resistant to environmental degradation and capable of being reliably scanned under operational conditions. This subcontract is issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense and falls under NAICS code 332999 for other miscellaneous fabricated metal product manufacturing. The solicitation was posted on July 29, 2026, with a response deadline of August 4, 2026, at 6:01 PM. There is no specified set-aside classification, and the performance location is not detailed beyond the overseeing agency’s jurisdiction. All eligible subcontractors must demonstrate technical capability to meet the stringent UID requirements and provide documented proof of compliance with federal marking and registry protocols.
Navsup Flt Logistics Ctr Puget Sound

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
Federal
25--PANEL,VEHICULAR OPE
Solicitation # SPE7LX26U9072
The solicitation seeks quotations for 24 units of NSN 2510016879931, VEHICULAR PANEL OPE, under a Small Business Set Aside, with a guaranteed minimum order of three units and an estimated annual volume of one order. The contract, if awarded, will be an Automated Indefinite Delivery Contract valid for one year or until cumulative orders reach $350,000, with deliveries directed to multiple DLA depots across CONUS and OCONUS via consolidated shipping points. The only approved source for this item is 64678 A22-73379-002, and no technical specifications, plans, or drawings are provided. All responsible small business sources may submit electronic quotes by the deadline of August 13, 2026; hard copies are not available. The solicitation is issued under NAICS code 332999 by the Defense Logistics Agency Land and Maritime, with inquiries directed to the designated buyer via email. The contract will be managed under solicitation number SPE7LX26U9072 and can be accessed only through the online SAM.gov workspace link.
DLA Land And Maritime

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
Federal
47--HOSE,NONMETALLIC
Solicitation # SPE7M426T291A
The contract solicitation seeks nonmetallic hose with NSN 4720011515619, with a total requirement of 35 units—34 units to be delivered to DLA Distribution San Diego within 333 days after award, and one additional unit to be delivered within 60 days after award. This is a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside procurement under FAR 19.14, meaning only eligible SDVOSB firms may submit quotes. The solicitation number is SPE7M426T291A, and it is classified as a combined solicitation under NAICS code 332999. All responsible sources that qualify as SDVOSBs may respond, but quotes must be submitted electronically by the deadline of August 10, 2026. The solicitation was posted on July 29, 2026, and is managed by the DLA Land and Maritime office based in Columbus, Ohio, with all inquiries directed to the point of contact listed in the solicitation document. Performance location details are unspecified, and the contract does not indicate any restrictions beyond the set-aside requirement.
DLA Land And Maritime

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
Federal
25--WINDOW,VEHICULAR
Solicitation # SPE7LX26U9070
The solicitation seeks quotes for 121 vehicular windows under NSN 2510016178631, with an estimated annual order volume of two and a guaranteed minimum quantity of 18 units; deliveries will be made to various CONUS and OCONUS DLA depots via consolidated and containerized shipping points. The contract, if awarded, will operate as an Automated Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, whichever comes first. Only the approved source, identified as 64678 18-57409-003, is eligible, and no technical specifications, plans, or drawings are provided. The solicitation is a Small Business Set Aside, total, under NAICS code 332999, and is open to all responsible sources that submit electronic quotes by the deadline. Issued by the Department of Defense through DLA Land and Maritime, the solicitation number is SPE7LX26U9070, posted on July 29, 2026, with responses due by August 13, 2026. All submissions must be submitted electronically via the provided SAM.gov link; hard copies are not available. Questions must be directed via email to the designated point of contact listed in the solicitation’s block 5, with additional guidance available on the DIBBS portal. Performance location details are not specified, but deliveries will reach multiple DLA depots across the United States and overseas.
DLA Land And Maritime

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
Federal
PIP-II HB650 CM3 Magnetic Shield
Solicitation # 384626-DSF
Fermilab, as a U.S. Department of Energy contractor, is seeking proposals for the fabrication, assembly, and delivery of the PIP-II HB650 CM3 Magnetic Shield under solicitation number 384626-DSF. This procurement supports the PIP-II Project and requires detailed adherence to the accompanying Statement of Work. Interested parties must submit proposals directly to the designated primary point of contact, Seth Fryar, no later than August 26, 2026, at 7:00 PM Eastern Time. Associated technical drawings referenced in Exhibit D are not publicly posted and must be requested directly from the primary contact. The solicitation was posted on July 29, 2026, and falls under NAICS code 332999 for other fabricated metal product manufacturing, with no set-aside provisions applied. All work is expected to be performed at Fermilab’s facility in Batavia, Illinois, with correspondence and submissions directed to the provided contact information.
Fermilab - DOE Contractor

POSTED

about 15 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332999
New
DIBBS
Military Packaging and Preservation ServicesThe contract requires comprehensive cleaning, drying, and preservation of a stud assembly in strict compliance with MIL-STD-2073-1E, Packaging Code U, to ensure complete protection against corrosion during both transit and extended storage. All work must adhere to the rigorous standards outlined in the military specification to guarantee the integrity and functionality of the component under harsh environmental conditions. The task involves precise procedural execution to eliminate contaminants, thoroughly dry the assembly, and apply approved preservation methods that meet or exceed federal military packaging requirements. This subcontract is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with performance obligations centered at Hunter Army Airfield, Georgia, in the 31409-0000 ZIP zone. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026, with the North American Industry Classification System code 332999 indicating it falls under other fabricated metal product manufacturing. The contract is not subject to any specific set-aside designation and must be executed to ensure readiness and logistical reliability for military use.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 332911
New
DIBBS
TRANSDUCER, SERVOVAL
Solicitation # SPE7M1-26-T-238D
This contract pertains to the procurement of a transducer, servovalve identified by NSN 4810-01-153-8090, with a quantity of six units to be delivered within 70 days under solicitation SPE7M1-26-T-238D. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List, including tailored higher-level quality standards, configuration change management protocols, and inspection and acceptance procedures conducted at origin. Packaging must adhere to MIL-STD-2073-1E with specific methods for preservation, wrapping, and containment, while marking follows MIL-STD-129 without special codes, and palletization aligns with DLA packaging guidelines. Delivery is FOB origin to the specified warehouse in Tracy, California, with no variance allowed in quantity. The contract prohibits intentional inclusion of mercury or mercury-containing compounds except in specified functional applications such as batteries, instruments, or Navy-controlled systems, with additional containment requirements for portable devices as per NAVSEA 5100-003D. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. The contract specifies that unit identification is not required, and transportation logistics are governed by DLA procedural notes C19 and C20. The required delivery date is December 4, 2027, though an earlier ship date of October 20, 2026, has been indicated. The point of contact for inquiries is Sara Wilson of the Department of Defense, Maritime Supply Chain.
Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-238C
This contract issued by the Defense Logistics Agency pertains to the procurement of magnetic contactors under NSN 6110011019710 and part number 70550-02028-101, with quantities of 61 units required at a unit price of $61.00 for a total contract value of $3,721. The product is classified as a critical application item for Sikorsky Aircraft Corporation, Te Connectivity Corporation, and National Machine Company, and must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited in or in direct contact with the supplied hardware, except for specific functional uses such as in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices required to have shock-proof construction and secondary containment per NAVSEA 5100-003D. All supplies must be packaged in accordance with MIL-STD-2073-1E and marked according to MIL-STD-129 with no special marking codes, and palletization must meet DLA packaging standards. Delivery is FOB origin with zero variance permitted and inspection and acceptance occurring at the destination. The required delivery date is January 2, 2027, with a shipment deadline of January 11, 2027, and delivery must be completed within 153 days of award. The solicitation was issued under a Service-Disabled Veteran-Owned Small Business Set-Aside with a response deadline of August 10, 2026, and procurement is governed by DLA procedures for transportation and shipping to Corpus Christi, Texas.
Relay and Industrial Control Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-237G
The contract pertains to the procurement of one magnetic contactor starter unit with NSN 6110-01-411-9297, supplied by General Electric Company under solicitation SPE7M1-26-T-237G. Deliveries are due within 20 days of contract award and must be shipped FOB destination with no variance allowed in quantity. Inspection and acceptance occur at the delivery point, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including MIL-STD-129 marking with no special codes. The item is to be delivered to USNS PILILAAU T AKR 304 in FPO AP 96675, with transportation governed by DLA procedural notes C19 and C20. Strict sampling protocols apply per MIL-STD-1916 or ASQ H1331, mandating zero non-conformances unless otherwise stated, with attributes designated as critical, major, or minor and corresponding verification levels or AQLs assigned accordingly. Mercury and mercury-containing compounds are prohibited in any hardware or supply unless specifically exempted for functional uses such as batteries, fluorescent lamps, or controlled instruments, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier. Technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by solicitation or award date depending on acquisition size. All requirements are binding, and the contractor must adhere to the designated unit of issue, delivery schedule, and government-specific identifiers for compliance.
Other Measuring and Controlling Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
CONTROLLER, MOTOR
Solicitation # SPE7M1-26-T-238H
The contract specifies the procurement of one unit of a motor controller with NSN 6110015270208 and part number PL215-023-010, supplied by Carolina Power Systems of Sumter Inc, designated as a critical application item. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur at the final destination. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 guidelines, including palletization requirements. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, instruments, sensors, weapon systems, or specified reagents, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. The item must be labeled and shipped according to DLA procedures, with delivery addressed to USS SAN ANTONIO LPD 17 at FPO AE 09587, under shipment code RDD 777 and transportation reference DLAD PROC NOTES C19 and C20. The original required delivery date is July 2, 2026, and the contract is governed by solicitation SPE7M1-26-T-238H under a federal procurement framework managed by the Department of Defense’s Maritime Supply Chain.
Other Measuring and Controlling Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, CHIP, FIXED
Solicitation # SPE7M1-26-T-238F
This contract specifies the procurement of 42 units of a fixed chip resistor with part number TNPW121034K0BETA from VISHAY DALE ELECTRONICS, LLC, identified by NSN 5905-01-689-2990. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date depending on acquisition size. Packaging, preservation, and marking must comply with MIL-STD-2073-1E, MIL-DTL-39032 for resistors, and MIL-STD-129, with special marking code ZZ-ZZ applying. The item must be delivered FOB origin within 84 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, with delivery directed to the DLA Distribution San Joaquin warehouse in Tracy, California. The need ship date is November 3, 2026, and the original required delivery date is December 31, 2026. The unit of issue is each, priced at $42.00 per unit for a total value of $1,764. Transportation logistics follow DLA Procurement Notes C19 and C20, and all packaging must align with palletization standards outlined in RP001. The contract is issued under solicitation SPE7M1-26-T-238F, with responses due by August 10, 2026, and falls under NAICS code 334416 for electronic component manufacturing.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333912
New
DIBBS
RING, PISTON
Solicitation # SPE7M1-26-T-237P
The contract is for one piston ring with part number 18-20419-12R1 and NSN 4310-01-706-4138, issued by the Defense Logistics Agency under solicitation SPE7M1-26-T-237P. Delivery is required within 20 days of contract award, with shipments to be delivered FOB destination to the USS HYMAN G RICKOVER (SSN 795) at FPO AE 09591. No variance in quantity is permitted, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking codes. Palletization must follow DLA’s RP001 packaging requirements, and parcel post is prohibited—shipment must be sent by the fastest traceable means. The required delivery date is July 27, 2026, and the contract is assigned to DLA vendors who must use the VSM system for fulfillment. The item falls under NAICS code 333912 and is procured by the Department of Defense through the Maritime Supply Chain office.
Air and Gas Compressor Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333912
New
DIBBS
RING, PISTON
Solicitation # SPE7M1-26-T-237L
The contract pertains to the procurement of one piston ring, part number 18-20416-7R1 and NSN 4310-01-706-3788, under solicitation SPE7M1-26-T-237L, with a required delivery within 20 days of award to the USS HYMAN G RICKOVER at FPO AE 09591. The item must be delivered FOB destination with zero variance in quantity and is subject to inspection and acceptance at the delivery point. Packaging must comply fully with MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revision control tied to the solicitation or award date depending on acquisition size. Supplier shipment must be made via the fastest traceable means, excluding parcel post, using the V27157 vendor code and RDD 777 for logistics tracking. The contract specifies the unit of issue as each, priced at one dollar, with total price reflecting the single unit. The supplier is directed to use VSM for DLA shipments, and the procurement is tied to project JK5 TP 3 under supply chain support code YNEA01. All delivery logistics, transportation procedures, and compliance are bound by DLA procedural notes C19 and C20, and the contract includes a required delivery date of July 27, 2026.
Air and Gas Compressor Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333996
New
DIBBS
SPINDLE ASSEMBLY
Solicitation # SPE7M1-26-T-237U
The SPINDLE ASSEMBLY with NSN 4320-01-192-4193 is a restricted source item requiring government engineering source approval, with procurement governed by DLA packaging and technical quality requirements referenced from the DLA Master List. Manufacturing may involve casting or forging operations where government-provided tooling is not available, necessitating a Casting and Forging Assistance Request for sourcing support. The solicitation is a Total Small Business Set-Aside under NAICS code 333996, with bids due by August 10, 2026, and delivery expected 398 days after order award. Offerors must submit comprehensive technical documentation including all manufacturing drawings, detailed process and operation sheets identifying critical processes and inspection criteria, and source information for forgings and castings. A shock extension report per MIL-S-901 in DI-ENVR-80706 format is mandatory, and if original OEM drawings are unavailable, an engineering analysis report must detail the reverse engineering methodology, including sample counts, measurement techniques, data compilations, and justification for dimensional deviations. All submissions must comply with MIL-T-31000 requirements and any deviations or waivers must be formally requested through an engineering change proposal. The purchase request is 7017600955 for one unit, with performance to be delivered to San Diego, California.
Fluid Power Pump and Motor Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335312
New
DIBBS
CONTROLLER, ELECTRICAL
Solicitation # SPE7M1-26-Q-1307
The contract pertains to the procurement of a single unit of an electrical controller, identified by NSN 6110-01-662-6290, under solicitation SPE7M1-26-Q-1307. Delivery is required 261 days after the award date, with firm fixed pricing and zero variance allowed in quantity. The item must be shipped to the specified destination in Virginia Beach, Virginia, using traceable means only—parcel post is explicitly prohibited. Packaging must comply with MIL-STD-2073-1E, with specific methods for preservation, wrapping, and containment, and marking must adhere to MIL-STD-129 without any special identification codes. The controller is designated as a critical application item, and its supply is tied to the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications referenced by R or I numbers. The contract strictly prohibits the use or incorporation of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, instrumentation, weapon systems, or specific chemical reagents authorized by NAVSEA. Portable devices containing mercury must be shock-proof and feature a secondary containment barrier as mandated by NAVSEA 5100-003D. Any substitute chemicals require prior approval unless explicitly authorized by the governing specifications. The item’s requirement is linked to purchase request 7013945979, with a scheduled ship date of September 22, 2025, and the contract is issued under the Department of Defense’s Maritime Supply Chain, using the authorized DoD unit of issue. Government-specific codes and identifiers are included for internal tracking and logistics purposes.
Motor and Generator Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, PAP
Solicitation # SPE7M1-26-T-238E
The contract is for the procurement of 56 units of a fixed paper-dielectric capacitor identified by NSN 5910-00-779-6646 and part number 7710252, sourced from approved suppliers including EXXELIA USA, INC. and HI-REL CAPACITORS INC. The item is subject to source-controlled drawing requirements, meaning only the listed manufacturers and their approved part numbers are acceptable, and all delivered units must fully comply with the specified drawing and technical standards. Packaging and marking must adhere strictly to MIL-STD-2073-1E and MIL-STD-129, including special labeling per IPC/JEDEC J-STD-609 to identify lead content, with all packaging coded as U and marked with the ZZ special requirement code. The delivery schedule requires shipment no later than February 3, 2026, with final delivery due in 67 days from the award date, delivered FOB origin to the designated receiving warehouse in Tracy, California. Inspection and acceptance occur at destination, with no variance allowed in quantity. All requirements are governed by the DLA Master List of Technical and Quality Requirements, and hazardous materials handling must follow DLAD PROC NOTE C19 and C20. The contract is issued under solicitation SPE7M1-26-T-238E with a unit price of $56.00 and a total value of $3,136.00, and is managed by the Department of Defense’s Maritime Supply Chain office.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333996
New
DIBBS
IMPELLER, PUMP, CENTRIFU
Solicitation # SPE7M1-26-T-238A
This contract specifies the procurement of two centrifugal pump impellers with an 8.1875 inch diameter, identified by NSN 4320013175413 and part number 3-0010-04 from Air & Liquid Systems Corporation. The impellers are classified as critical application items and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. No mercury or mercury-containing compounds may be intentionally added or come in direct contact with the hardware except for specific exempted uses such as batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents designated by NAVSEA, and any portable devices containing mercury must have shock-proof construction and a secondary containment barrier in accordance with NAVSEA 5100-003D. The items must be delivered FOB origin with zero variance in quantity and are subject to inspection and acceptance at the destination. Packaging must adhere to DLA packaging requirements and palletization standards, with specified containment, wrapping, and labeling details. The delivery deadline is 161 days from award, with an original required delivery date of February 24, 2027, and a need ship date of January 19, 2027. The contract is issued under solicitation SPE7M1-26-T-238A, structured as a total small business set-aside under NAICS code 333996, with delivery addressed to the DLA Distribution facility in New Cumberland, Pennsylvania, and all transportation governed by DLAD procedural notes.
Fluid Power Pump and Motor Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333996
New
DIBBS
RING, WEARING
Solicitation # SPE7M1-26-T-237F
The contract pertains to a wearing ring, specification part number 9-0145-01 and NA1098-1, supplied by Air & Liquid Systems Corporation for use on a centrifugal pump under the Buffalo Pump Division of Buffalo Forge. The item is classified as a critical application component with a single-unit quantity required under purchase request 7017656905, delivered FOB destination within 20 days of contract award. The National Stock Number is 4320-00-139-3973, and delivery is directed to USS GEORGE WASHINGTON CVN 73 at FPO AP 96607. Packaging must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 with no special marking, and palletization complies with DLA packaging requirements. The contract prohibits the use of ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except in specified functional applications such as batteries, fluorescent lights, or instrument sensors, with additional containment requirements for portable devices. Preservation, packaging, and marking materials must also be free of mercury. The supplier must perform a CMMC Level 2 self-assessment and comply with all technical and quality requirements referenced in the DLA Master List. Transportation and shipping instructions are governed by DLAD Proc Notes C19 and C20, and the item is subject to inspection and acceptance at the destination. The solicitation, issued under SPE7M1-26-T-237F with a response deadline of August 10, 2026, requires full compliance with Department of Defense procurement standards and unit of issue definitions as specified by ANSI X12.
Fluid Power Pump and Motor Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details