Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on August 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Concrete Forming and Placement

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238110
New
South Concourse Evolution (SCE) Bid Package 2.1
Solicitation # Bid Package 2.1
The South Concourse Evolution (SCE) Bid Package 2.1 is a solicitation issued by Hensel Phelps for the Seattle-Tacoma International Airport in Washington. The scope of work focuses on Subsystem 2.1.01, specifically for new building concrete under NAICS code 238110. This opportunity is designated as an 8(a) set-aside for Small Disadvantaged Businesses, with an estimated budget range between 8 million and 10 million dollars. Bids must be submitted via email by 2:00 PM PDT on October 15, 2026. Compliance requirements for this project include adherence to a Project Labor Agreement (PLA) and the provision of a Workers Compensation Waiver of Subrogation from all subcontractors. Bidders are required to submit a bid bond with their initial proposal using the provided forms. Furthermore, successful bidders must furnish 100 percent payment and performance bonds for any subcontracts exceeding 100,000 dollars. All final subcontracts must be executed on standard Hensel Phelps subcontract forms.
Hensel Phelps

POSTED

about 6 hours ago

DEADLINE

in 12 days
NAICS: 238110
New
SLED
Concrete Patio Removal and Replacement
Chatham County

POSTED

about 19 hours ago

DEADLINE

in 28 days
NAICS: 238110
New
SLED
26-0126-2 Concrete Replacement at the Chatham County Aquatic Center
Solicitation # 26-0126-2
Solicitation 26-0126-2 is a one-time purchase contract issued by Chatham County, Georgia, to remove and replace approximately 1,800 square feet of concrete patio beneath the canopy entrance at the Chatham County Aquatic Center in Savannah. The scope of work includes subgrade preparation, installation of a moisture barrier, and the pouring of a reinforced concrete slab at least 4 inches thick with a minimum 3,000 PSI and a broom finish. Additionally, the contractor must install an underground drainage system using Schedule 40 PVC piping to route roof downspout water away from the structure. Key technical requirements include a specific grading slope, the use of a #3 rebar grid or heavy-duty welded wire mesh, and mandatory water testing of drain lines prior to concrete placement. The contract will be awarded to the responsible bidder who provides the best value based on price, responsibility, and past performance. Bidders must submit all required documentation, including Forms A-I and E-Verify affidavits, via the online procurement portal by November 6, 2026. Mandatory requirements for the selected contractor include maintaining liability and workman's compensation insurance, holding a current Chatham County Tax Certificate, and adhering to a 30% combined MBE/WBE participation goal. Payments are processed within 30 days of receiving an approved invoice, and work may only begin after the issuance of a written contract and a Notice to Proceed from the Purchasing Director.
Chatham County

POSTED

about 19 hours ago

DEADLINE

in 28 days
NAICS: 238110
New
SLED
Concrete Repair & Patching
Texas Department of Transportation

POSTED

about 21 hours ago

DEADLINE

in 25 days
NAICS: 238110
New
SLED
Signal Base & Pedestal Concrete Repair
Texas Department of Transportation

POSTED

about 21 hours ago

DEADLINE

in 25 days
NAICS: 238110
New
SLED
Concrete Barrier and Curbing
Texas Department of Transportation

POSTED

about 21 hours ago

DEADLINE

in 25 days
NAICS: 238110
New
SLED
Concrete Patching and Repair
Texas Department of Transportation

POSTED

about 21 hours ago

DEADLINE

in 26 days
NAICS: 238110
New
SLED
Bridge Concrete Repair
Texas Department of Transportation

POSTED

about 21 hours ago

DEADLINE

in 25 days
NAICS: 238110
New
SLED
Concrete and Thermal Protection
NYS OGS Design & Construction - Construction Contractors

POSTED

about 21 hours ago

DEADLINE

in 5 days
NAICS: 238110
New
SLED
Concrete and Moisture Protection
NYS OGS Design & Construction - Construction Contractors

POSTED

about 21 hours ago

DEADLINE

in 5 days
NAICS: 238110
New
SLED
Access Ramps, Retaining Walls, and Staircase Construction
DAS Procurement

POSTED

about 21 hours ago

DEADLINE

in 27 days
NAICS: 238110
New
SLED
Cast-in-Place Concrete Work
Ohio Department of Public Safety

POSTED

about 21 hours ago

DEADLINE

in 18 days

AI Contract Overview

Show more

The Concrete Forming and Placement subcontract, issued by the Department of Defense under the ASC Commodities Division, involves the forming, reinforcement, and pouring of structural concrete for foundations, slabs, and walls. This project falls under NAICS code 238110 and is managed through the DIBBS procurement system. The solicitation was posted on August 26, 2026, with a response deadline set for September 3, 2026. Interested parties must submit their responses by this date to be considered for the subcontract.

General Info

DoD subcontract for structural concrete forming and placement; responses due September 3, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

238110 - Poured Concrete Foundation and Structure Contractors

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-23ER.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BOLT, SHEAR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Forming, reinforcement, and pouring of structural concrete for foundations, slabs, and walls.

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPEA46-26-T-25CQ
This contract, identified as SPE4A6-26-T-25CQ, is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 52 sleeve bushings under NSN 3120-01-228-0655. The items are identified as critical application items with part number CF2-AA-851-7 from Flowserve Corp. The contract specifies a delivery timeframe of 138 days after order, with a need ship date of January 25, 2027, and an original required delivery date of July 30, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The procurement is subject to rigorous technical and quality standards, including DLA packaging requirements (RP001), tailored higher level quality requirements (RQ001), and specific marking and measuring equipment standards (RQ017 and RT001). A strict prohibition is placed on the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, packaging, and marking, except for specific functional exceptions. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129. The solicitation falls under NAICS code 332991 and requires adherence to the DLA Master List of Technical and Quality Requirements.
Ball and Roller Bearing Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-16JU
Solicitation SPE4A6-26-T-16JU, issued by the DLA Aviation ASC Commodities Division, is for the procurement of five units of a specific cable assembly, identified by NSN 5995-01-693-2225 and part numbers 78550-08801-101 (Sikorsky Aircraft Corporation) or AA27500 (Semco Instruments, Inc.). The requirement is for a fixed-price delivery with a required delivery date of October 23, 2027, and a delivery timeline of 428 days. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and logistical standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance will be conducted at the destination using sampling methods per MIL-STD-1916 or ASQ H1331. Key regulatory requirements include compliance with NIST SP 800-171 for cybersecurity and OSHA 29 CFR 1910.1200 for hazardous material labeling. Item Unique Identification (IUID) is not required for this procurement. Invoicing must be processed electronically through the Wide Area Workflow (WAWF) system.
Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-23QQ
This contract is for the procurement of three special purpose electrical cable assemblies, identified by NSN 5995017357678 and L3Harris Technologies part number 11496-1554-A009. The items are designated as critical application items and must be delivered to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of August 8, 2027. The delivery timeframe is set at 338 days after order, with shipping terms established as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to various technical and quality requirements, including CMMC Level 2 self-assessment, covered defense information protocols, and specific DLA packaging and marking standards. Notably, the materials must not contain intentionally added mercury, except in specific functional cases approved by NAVSEA. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, and the items do not have a shelf life requirement.
Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332722
New
DIBBS
Precision Machine Bolt SupplyThis subcontract involves the manufacture or procurement of one specialized machine bolt, identified as NSN 5306-01-722-2609, for prime contractors supporting the Department of Defense ASC Commodities Division. The component must adhere to MIL-STD-1916 or ASQ H1331 sampling standards and MIL-STD-2073-1E packaging requirements, with final delivery to the Electric Boat Corporation in North Stonington, Connecticut. The agreement mandates strict adherence to the Buy American Act and the Berry Amendment, alongside rigorous security and export compliance including NIST SP 800-171/CMMC Level 2 and ITAR/EAR regulations. This procurement falls under NAICS code 332722 and requires the delivery of a fully inspected part.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
Supplier of Plain Round Nuts (NSN 5310-00-90-24097)This subcontract involves the manufacture or procurement of 88 plain round nuts, specifically Part Number MS172330 under NSN 5310-00-90-24097, to support prime contractors on DLA Aviation ASC projects. The selected supplier must adhere to strict quality sampling standards per MIL-STD-1916 or ASQ H1331 and ensure all marking and packaging comply with MIL-STD-129, RP001, and MIL-STD-2073-1. Additionally, the contractor is required to maintain full compliance with the Buy American Act and the Berry Amendment. The deliverables are to be shipped FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. This opportunity is managed by the Department of Defense under the ASC Commodities Division, falling under NAICS code 332722. Interested parties must have submitted their responses by the deadline of October 13, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 488510
New
DIBBS
Secure Freight Forwarding to FPO (USS Ronald Reagan)This subcontract involves providing specialized shipping and delivery services for prime contractors supporting the Department of Defense ASC Commodities Division. The primary objective is the transport of defense components to the USS Ronald Reagan CVN 76 at FPO AP 96616 under FOB Destination terms. The service provider must ensure all shipments are delivered directly to the end-user vessel while adhering to strict routing requirements for Fleet Post Office destinations. The contractor is required to maintain rigorous packaging and labeling compliance in accordance with MIL-STD-2073-1E and MIL-STD-129 throughout the transit process. Additionally, the provider must possess the necessary capabilities and authorizations to handle ITAR-controlled hardware. This opportunity falls under NAICS code 488510 and requires a response by October 13, 2026.
Freight Transportation Arrangement

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 332710
New
DIBBS
Manufacture of Straight Headle PinsThis subcontract involves the precision machining and manufacture of straight headle pins, specifically NSN 5315-01-475-5557, for prime contractors supporting the Department of Defense ASC Commodities Division. The project requires strict adherence to quality control standards, utilizing inspection systems compliant with SAE AS9003 or ISO 9001 and zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. All finished products must be packaged in accordance with MIL-STD-2073-1E. Compliance requirements include the US/Canada Joint Certification Program and DFARS 252.204-7012. The contract falls under NAICS code 332710, with the place of performance located at FPO 96616. Interested parties must note the response deadline of October 13, 2026.
Machine Shops

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 336611
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-35WY
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 24 sleeve bushings under part number 3120-01-288-7168. The contract requires delivery within 128 days after the order is placed and is categorized under NAICS code 336611. Performance is designated for New Cumberland, Pennsylvania, with the primary point of contact being Niyana Yarber. The agreement is subject to strict technical and quality standards, including DLA packaging requirements and inspection and acceptance at origin. It mandates compliance with Cybersecurity Maturity Model Certification Level 2 and contains covered defense information. Furthermore, the technical data is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DOD export-controlled technical data training to access the information.
Ship Building and Repairing

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
RIVET, SOLID
Solicitation # SPE4A6-26-U-4394
Solicitation SPE4A6-26-U-4394 is a total small business set-aside for the procurement of solid rivets, specifically part number NAS1097KE3-12 (NSN 5320011788407). This is a unilateral Indefinite Delivery Contract (IDC) with a maximum value of 350,000.00 USD and an estimated annual quantity of 9,232 units. The items are classified as commercial critical application items and must be manufactured in accordance with the current revision of the NAS1097 part standard and reference drawing 13873 EI-011788407. Delivery is required within 93 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. Quality assurance is governed by a zero-based sampling plan following MIL-STD-1916 or ASQ H1331, with specific AQLs assigned to critical, major, and minor attributes. Packaging must comply with ASTM D3951 and MIL-STD-129, though DLA Master List requirements and RP001 palletization standards take precedence. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The contract also mandates compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information.
Hardware Manufacturing

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-27SQ
This contract is for the procurement of six special purpose electrical cable assemblies, identified by NSN 6150014771234 and part number 031-01609-000 from Johnson Controls Navy Systems, LLC. The delivery is required within 171 days, with a need ship date of March 8, 2027, and a final delivery date of July 6, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with zero-based sampling required for acceptance. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. Technical and quality requirements are further detailed in the DLA Master List.
Other Electronic Component Manufacturing

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
BUS, CONDUCTOR
Solicitation # SPE4A6-26-T-37SC
Solicitation SPE4A6-26-T-37SC is a fixed-price request for quotation issued by the DLA Aviation, ASC Commodities Division, for the procurement of one conductor bus, identified by NSN 6150-01-559-9742. This item is classified as a Commercial Off-The-Shelf product. The required delivery date is February 2, 2027, with a need ship date of September 6, 2026, for delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, with packaging governed by MIL-STD-2073-1E and marking by MIL-STD-129. Palletization must follow DLA requirement RP001. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to any hardware or supplies. Additionally, the contractor must comply with the Buy American Act, the Berry Amendment, and CMMC Level 2 Self-Assessment standards. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
Other Electronic Component Manufacturing

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A6-26-T-37VC
Solicitation SPE4A6-26-T-37VC is a total small business set-aside issued by the Department of Defense, ASC Commodities Division, for the procurement of 12 units of Wiring Harness, Bran. The required items are identified by NSN 5995016011190 and Daimler Truck North America LLC part number A06-83417-000. This fixed-price contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of October 31, 2026, and a delivery window of 23 days after order. Shipping terms are FOB Origin, while inspection and acceptance will occur at the destination. The contractor must adhere to strict quality and technical standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance involves sampling per MIL-STD-1916 or ASQ H1331, with specific AQL levels for critical, major, and minor attributes. Additionally, the contract mandates a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and compliance with the Buy American Act and Berry Amendment. Payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.
Other Electronic Component Manufacturing

POSTED

2 days ago

DEADLINE

in 4 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS