Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Concrete Placement and Finishing

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Concrete Placement and Finishing involves the installation of stow pin sockets and the execution of concrete pouring for prime contractors at Jacksonville Port Authority marine terminal projects. The scope of work specifically requires setting fabricated sockets and pouring and finishing concrete surfaces at Ft Markers 1565 and 1720 in strict accordance with ASTM standards. The contractor is responsible for providing all necessary concrete mixing and finishing equipment to complete the project. The final deliverable consists of eight installed and encased stow pin sockets with professionally finished concrete surfaces. This project falls under NAICS code 238110 and is associated with the Jacksonville Port Authority in Florida.

General Info

Subcontract for installing eight stow pin sockets and concrete finishing at Jacksonville Port.

Documents

This scope was carved out of ITB_MC-2132.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

INTSALLATION OF NEW CRANE STOW PIN SOCKETS AT THE TALLEYRAND MARINE TERMINAL (TMT)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyFlorida → Jacksonville Port Authority
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installs stow pin sockets and performs concrete pouring for prime contractors on Jacksonville Port Authority (JAXPORT) marine terminal projects. Sets fabricated sockets in place, pours concrete, and finishes surfaces at Ft Markers 1565 and 1720 per ASTM standards. Requires concrete mixing and finishing equipment. Delivers eight installed and encased stow pin sockets with finished concrete surfaces.

Similar Contracts

Same NAICS industry code

More opportunities from Florida → Jacksonville Port Authority

Same awarding agency

New
SLED
BLOUNT ISLAND MARINE TERMINAL HANJUNG CRANE #8841 REFURBISHMENT
Solicitation # ITB_EQ-2039A
The Jacksonville Port Authority (JAXPORT) is soliciting bids under contract ITB_EQ-2039A for the refurbishment of Hanjung Crane #8841 at the Blount Island Marine Terminal. The scope of work includes rolling back the crane to a designated service area, replacing the trolley rail system using JAXPORT-provided materials, performing critical structural repairs, and executing comprehensive painting and corrosion removal. The project must be completed within 90 calendar days from the Notice to Proceed. Award will be based on the lowest price consistent with specifications, subject to a responsibility determination evaluating the contractor's financial standing, experience, and organizational capacity. Bids must be submitted electronically via OpenGov by 2:00 PM ET on November 17, 2026. A pre-bid conference and site visit are scheduled for October 28, 2026, with a deadline for questions on November 2, 2026. Key contractual requirements include a mandatory 5% Small and Emerging Business (SEB) participation goal, 100% performance and statutory payment bonds, and a 5% bid security. Contractors are restricted from subcontracting more than 25% of the total jobsite work without approval. Personnel must undergo mandatory security and safety training, and all on-site vehicles must be clearly identified. Payment will be processed through E-Builder, with mobilization and demobilization paid at 60% and 40% respectively.

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 238990
New
SLED
INTSALLATION OF NEW CRANE STOW PIN SOCKETS AT THE TALLEYRAND MARINE TERMINAL (TMT)
Solicitation # ITB_MC-2132
The Jacksonville Port Authority (JAXPORT) is soliciting bids under contract ITB_MC-2132 for the installation of two new sets of stow pin sockets to secure dockside gantry cranes at the Talleyrand Marine Terminal. The project involves installing four sockets each at foot markers 1565 (Berth 7) and 1720 (Berth 6). The selected contractor must provide all labor, materials, equipment, and supervision, with a required completion timeline of 90 calendar days following the Notice to Proceed. Key deliverables include concrete testing via certified independent agencies and the submission of a jobsite-specific electronic safety manual. The work must adhere to strict technical standards, including OSHA 29 CFR regulations and specific ASTM and structural welding codes. Bids must be submitted electronically in PDF format via OpenGov by 2:00 PM ET on November 18, 2026. A mandatory pre-bid conference and site visit are scheduled for October 29, 2026. The contract will be awarded to the lowest responsive responsible bidder based on the total bid amount for five specific line items, including mobilization, metal fabrication, and concrete finishing. Bidders must provide a bid security of 5 percent of the bid amount and certify they are not controlled by a foreign country of concern. Administrative requirements include the use of E-Builder for invoicing, compliance with GAAP accounting practices, and mandatory security and safety training for all personnel working on the JAXPORT job site.
All Other Specialty Trade Contractors

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
New
SLED
TALLEYRAND MARINE TERMINAL (TMT) PILE, CAP, AND BEAM REHAB
Solicitation # ITB C-2131
The Jacksonville Port Authority is soliciting bids for contract ITB_C-2131 to perform repairs on existing prestressed concrete piles at the Talleyrand Marine Terminal, specifically within Berth 6. The scope of work includes the underwater installation of non-structural pile jackets and the design, installation, testing, and commissioning of a cathodic protection system consisting of galvanic and bulk anodes. The project must be completed within 270 calendar days from the receipt of the Notice to Proceed, with an additional one-year performance period for final cathodic protection system testing. Award will be granted to the lowest responsive and responsible bidder based on the total bid amount for specified line items. Interested contractors must attend a mandatory pre-bid conference and site visit on October 15, 2026, and submit all questions by October 19, 2026. Sealed bids must be submitted in PDF format via the OpenGov portal by 2:00 PM ET on November 3, 2026. Required submission materials include a bid bond for 5 percent of the bid amount, a signed bid form, and various certifications including Conflict of Interest, Public Entity Crime, and E-Verify forms. The contractor is required to provide performance and payment bonds for 100 percent of the contract value and ensure all personnel complete mandatory security and safety training. All project documentation and payment requests must be managed through the Trimble E-Builder Enterprise system.

POSTED

2 days ago

DEADLINE

in 18 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS