Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Concrete Removal Contractor

Active

State & Local

Response Deadline10/01/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Texas Department of Transportation involves the removal of concrete sidewalks for prime contractors within Bexar County, Texas. The contractor is responsible for utilizing concrete sawing and breaking equipment to remove sidewalks, with the scope of work measured by square yardage. The contractor must manage the hauling and disposal of all debris in accordance with standard construction safety regulations to deliver a fully cleared site. This project falls under NAICS code 238910 and is scheduled for October 2026.

General Info

Concrete sidewalk removal and debris disposal for TxDOT in Bexar County by October 2026.

Agency

Texas Department of Transportation

NAICS

238910 - Site Preparation Contractors

Place of Performance

Bexar, TX, USA

Set-Aside

NONE

Documents

This scope was carved out of 6509-98-001.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Bexar County — CSJ 6509-98-001 — October 2026 Letting — Local-Let Maintenance

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 1

subcontract

Response DeadlineOct 1

Submission deadline

Response Deadline

10/01/2026, 12:00:00 AM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas Department of Transportation

ContactsNo contacts available

OfficeN/A

Organization / AgencyTexas Department of Transportation

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs removal of concrete sidewalks for prime contractors on TxDOT projects in Bexar County, TX. Uses concrete sawing and breaking equipment to remove existing sidewalks measured by square yardage. Manages hauling and disposal of debris per standard construction safety regulations. Delivers a cleared site with concrete sidewalks removed.

Similar Contracts

Same NAICS industry code

Utility Excavation and BackfillThis subcontract for Utility Excavation and Backfill supports the San Diego Job Corps Center on the Bldg. 63B Drain Replacement project. The selected contractor will be responsible for excavating to expose damaged piping, removing roots and debris, and performing necessary backfilling and compaction using specialized equipment to prevent future settling. The primary objective is to deliver exposed piping ready for repair and ensure all excavated areas are properly restored. The opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, VOSB, and SDVOSB entities under NAICS code 238910. Interested parties must submit their responses by October 13, 2026.

San Diego Job Corps Center

POSTED

about 10 hours ago

DEADLINE

Riprap Material SupplyThis subcontract opportunity is for the supply and delivery of 24 tons of PennDOT R-4 riprap to prime contractors working on US Army Corps of Engineers projects. The material must meet all PennDOT specifications and be delivered directly to the project site located in the 15223 zip code area. Managed by the Department of Defense through the W072 Endist Pittsburgh office, this requirement is designated as a total Small Business Set Aside under NAICS code 238910. The solicitation was posted on September 24, 2026, with a response deadline of October 26, 2026.

W072 Endist Pittsburgh

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Riprap & Geotextile InstallationThis subcontract for the Department of Defense, specifically the W072 Endist Pittsburgh, involves bank stabilization work for prime contractors on US Army Corps of Engineers projects. The scope of work includes removing damaged geotextiles and installing Class 4 Type A non-woven geotextile on prepared subgrades, followed by the placement of R-4 riprap in accordance with PDT 408 Specification Sections 735 and 850. The project requires the delivery of 24 tons of riprap and the installation of 47 square yards of geotextile. The opportunity is designated as a total Small Business Set Aside under NAICS code 238910. Performance will take place in the 15223 zip code area. Interested parties must submit their responses by the deadline of October 26, 2026.

W072 Endist Pittsburgh

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Earthwork & Sediment RemovalThis subcontract opportunity with the Department of Defense, specifically the W072 Endist Pittsburgh, involves earthwork and sediment removal for US Army Corps of Engineers projects. The scope of work includes the excavation, removal, and disposal of 1,051 cubic yards of in-channel shoaling, the installation of erosion and sedimentation control measures, and the creation of temporary water diversions and pumping systems. Additionally, the contractor is responsible for placing and compacting new soil fill in 6-inch loose lifts using vibratory plate compactors or steel-wheeled rollers to ensure a cleared channel and stabilized subgrade according to PDT 408 Specifications. The project is designated as a total Small Business Set Aside under NAICS code 238910. Performance will take place in the 15223 zip code area. Interested parties must submit their responses by October 26, 2026, at 4:00 PM.

W072 Endist Pittsburgh

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Clearing, Grubbing, and Erosion ControlThis subcontract for the Bridger-Teton National Forest under the Department of Agriculture involves site clearing, grubbing, and the removal of timber, construction slash, and debris using heavy machinery. The contractor is responsible for implementing sediment and erosion control measures in accordance with Section 023701 and managing the disposal of waste materials to deliver a graded site prepared for corral installation. The project is located in Moran, Wyoming, and is designated as a total Small Business Set Aside under NAICS code 238910. The solicitation was posted on September 24, 2026, with a response deadline of October 29, 2026.

Bridger-Teton National Forest

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Stormwater and Erosion ControlThis subcontract involves the installation of drainage systems and erosion control measures for prime contractors working on Aemetis Biogas, LLC projects located in Keyes, California. The scope of work includes the installation of drainage basins and the implementation of stormwater mitigation strategies, specifically utilizing riprap and silt fences to prevent waste discharge. The contractor is required to ensure full compliance with CEQA environmental standards, NPDES permitting, and Regional Water Quality Control Board regulations. The ultimate objective of the agreement is the delivery of a fully completed stormwater management system that meets all specified regulatory and environmental requirements.

Stanislaus County

POSTED

about 19 hours ago

DEADLINE

Hydro Excavation ServicesThis subcontract for hydro excavation services is issued by Murphy Pipeline Contractors, LLC for lead service line replacement projects located in Cincinnati, Ohio. The contractor will utilize high-pressure water excavation to safely expose underground utilities and deliver potholes, specifically to prevent utility strikes during the replacement process. The opportunity is designated as a small business set-aside, welcoming applicants including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and certified Minority or Disadvantaged Business Enterprises. Interested parties must respond by September 28, 2026, under NAICS code 238910.

Murphy Pipeline Contractors, LLC

POSTED

about 22 hours ago

DEADLINE

Indefinite Delivery Indefinite Quantity Construction - Colorado

Solicitation # IFB CO-102926

POSTED

DEADLINE

in about 1 month

Dock Demolition and Debris RemovalThe Dock Demolition and Debris Removal subcontract involves providing site cleaning and material removal services for prime contractors working on City of Everett Parks and Facilities projects. The scope of work focuses on removing existing decking materials and garbage from dock areas to ensure the site is cleared and ready for reconstruction. A critical component of the project is the use of debris containment systems to comply with strict Hydraulic Project Approval permit requirements, which are designed to prevent water contamination. This opportunity is associated with NAICS code 238910 and is located in Everett, Washington. The solicitation was posted on September 23, 2026, with a response deadline of October 29, 2026.

City of Everett

POSTED

DEADLINE

in about 1 month

Concrete Demolition and Debris RemovalThis subcontract for the City of Milledgeville involves the demolition and removal of degraded concrete for Fire Rescue Service Station projects. The contractor is responsible for using concrete saws, jackhammers, and hauling trucks to clear approximately 40 by 40 feet of existing pavement and all associated construction debris to deliver a site ready for subgrade preparation. A critical requirement of the project is the coordination with Fire Rescue personnel to ensure that emergency response capabilities remain fully operational throughout the process. The solicitation was posted on September 23, 2026, with a response deadline of October 16, 2026, falling under NAICS code 238910.

City of Milledgeville

POSTED

DEADLINE

Site Grading and ExcavationThis subcontract for Site Grading and Excavation involves performing site preparation for prime contractors on projects for the Clinch County Board of Commissioners in Georgia. The scope of work includes clearing, grubbing, the removal of existing vegetation or pavement, and the grading and compaction of the sub-base. All activities must be executed according to the 2021 Edition of the GDOT Standard Specifications to ensure the site is ready for concrete pouring. The contractor will utilize heavy machinery, including excavators, skid steers, rollers, and dump trucks for soil hauling. This opportunity was posted on September 23, 2026, with a response deadline of October 27, 2026. The project falls under NAICS code 238910 and is managed by the Clinch County Board of Commissioners.

Clinch County Board of Commissioners

POSTED

DEADLINE

in about 1 month

Civil/Excavation SubcontractorThis subcontract for School District 43 in Coquitlam involves providing civil and excavation services for various facility projects. The scope of work includes site preparation, trenching for underground electrical services, the installation of concrete-encased secondary ducts, and the construction of concrete pads for transformers and outdoor kiosks. Additionally, the subcontractor is responsible for installing equipment protection bollards and restoring disturbed foundations to their original state. All work must be performed in strict compliance with the BC Building Code and Port Coquitlam bylaws. The contract was posted on September 23, 2026, with a response deadline of October 23, 2026. The primary objective is the delivery of completed trenches and concrete pads to support the prime contractor's project requirements.

School District No. 43 (Coquitlam)

POSTED

DEADLINE

More opportunities from Texas Department of Transportation

Same awarding agency

Vehicle Electrical & Control SystemsThis subcontract for Vehicle Electrical and Control Systems involves the electrical wiring and installation of control systems for prime contractors on Texas Department of Transportation equipment procurement projects. The scope of work includes installing electrical components, control panels, and wiring specifically for striping guns to deliver a fully operational electrical control system. All deliverables must adhere to OSHA standards and carry UL, FMRC, or NEMA listings. The opportunity is associated with NAICS code 335999 and was posted on September 23, 2026, with a response deadline of October 23, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Six-Gun Two-Color Striping System SupplyThis subcontract for the Texas Department of Transportation involves the supply of a Six-Gun Two-Color Striping System designed for prime contractors on equipment procurement projects. The scope of work includes the engineering and delivery of an integrated application system featuring paint reservoirs, glass bead dispensers, and a six-gun setup to ensure the uniform application of traffic line marking paint and reflective beads with sharp line definition. The opportunity was posted on September 23, 2026, with a response deadline of October 23, 2026. Classified under NAICS code 339999, the contract focuses on providing specialized hardware essential for high-quality road striping operations.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Air-Ride Steel Platform FabricationThis subcontract involves the fabrication and installation of a steel platform designed for prime contractors working on Texas Department of Transportation equipment procurement projects. The scope of work focuses on professional welding and steel fabrication to integrate an air-ride suspension system onto a truck chassis, providing a stable base necessary for the operation of striping guns. All deliverables must strictly adhere to TxDOT specifications regarding durability and stability. The final requirement is the delivery of a completed steel platform with a fully integrated air-ride suspension system. This opportunity is categorized under NAICS code 332312 and is associated with the Texas Department of Transportation.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Cab-Over Truck Chassis SupplyThis subcontract opportunity with the Texas Department of Transportation involves the supply of one new cab-over-type truck chassis designed for prime contractors on equipment procurement projects. The required chassis must be of first-class quality, capable of supporting a heavy steel platform and an air-ride suspension system, while adhering to all applicable safety and road standards. The solicitation was posted on September 23, 2026, with a response deadline of October 23, 2026. This procurement falls under NAICS code 336120 and is managed through the TxDOT Bonfire hub.

Heavy Duty Truck Manufacturing

POSTED

DEADLINE

Truck Mounted Striping Machine, Two Color, Multiple-Line

Solicitation # 601440000053800

The Texas Department of Transportation (TxDOT) is soliciting proposals for the procurement of one self-contained, truck-mounted, six-gun, two-color striping machine. The equipment must be capable of uniformly applying traffic line marking paint and glass reflective beads with sharp line definition. Technical requirements specify a cab-over-type truck chassis with a steel platform on air-ride suspension, and the unit must comply with TxDOT Specification 072-08-74, Federal Motor Vehicle Safety Standards, and specific OSHA safety regulations regarding handrails and toe plates. The equipment will be delivered to San Angelo, Texas, and is subject to acceptance inspection and performance testing upon receipt, which must be completed within five working days. The contract will be awarded based on best value, considering factors such as installation and life cycle costs, delivery terms, agency productivity impact, and training costs. To be considered responsive, vendors must submit a comprehensive proposal via the Euna Procurement system by October 23, 2026, including a pricing schedule, execution of proposal, Texas Family Code certification, data sheets, and vendor qualifications. Mandatory certifications include compliance with child support obligations under Texas Family Code Section 231.006 and various state affirmations regarding conflicts of interest and ethical conduct. Final acceptance and payment are contingent upon the provision of the Manufacturer's Statement of Origin and the completion of all required training.

Construction Machinery Manufacturing

POSTED

DEADLINE

OEM Elevator Replacement Parts SupplierThis subcontract agreement establishes a supplier for genuine Original Equipment Manufacturer replacement parts supporting prime contractors on Texas Department of Transportation Austin District projects. The scope of work includes the provision of critical components such as door operator motors, brake magnets, solid state components, resistors, condensers, transformers, and steel selector cables. The supplier is responsible for maintaining a warehouse inventory of these OEM-certified parts to ensure minimal downtime for project operations. This procurement falls under NAICS code 423830 and is managed by the Texas Department of Transportation, with a response deadline set for October 23, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Annual Elevator Inspection and Compliance CertificationThe Annual Elevator Inspection and Compliance Certification is a subcontract opportunity with the Texas Department of Transportation for the Austin District. The selected provider will perform annual safety and operational inspections of elevators for prime contractors to ensure all units comply with state, local, and original equipment manufacturer safety standards. The scope of work includes conducting comprehensive inspections of all units and delivering formal Certificates of Compliance along with detailed annual inspection reports. This opportunity is categorized under NAICS code 541330, with a response deadline of October 23, 2026.

Engineering Services

POSTED

DEADLINE

Elevator Maintenance and Repair Technician ServicesThis subcontract for Elevator Maintenance and Repair Technician Services supports prime contractors on Texas Department of Transportation Austin District projects. The scope of work involves comprehensive monthly maintenance and operational upkeep of elevator systems, specifically focusing on the repair of microprocessor controllers, motor windings, drive sheaves, thrust bearings, and worm gears in accordance with OEM requirements. The selected provider must utilize specialized mechanical driving equipment and elevator control systems, and all personnel must hold a Qualified Mechanic certification. Key deliverables include the provision of fully operational elevator systems and the submission of detailed maintenance logs. The opportunity is categorized under NAICS code 811310, with a response deadline of October 23, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Elevator Maintenance and Repair Services

Solicitation # 601440000053754

Solicitation 601440000053754 is a request for proposals from the Texas Department of Transportation for elevator maintenance, repair, and inspection services within the Austin District. The scope of work includes maintaining elevators at the Stassney Headquarters, Greer Building, and Flight Services in accordance with OEM requirements, ASME standards, and TDLR regulations. The contract requires the vendor to provide a Preventive Maintenance Plan and Checklist within 14 days of award and adhere to strict response times, including a two-hour window for emergency calls and a 24-hour window for normal service calls. The initial term of the contract expires on March 11, 2028, with the possibility of three one-year renewals at the agency's discretion. The award will be based on the best value for the state, utilizing a weighted evaluation system after a pass/fail screening for completeness, financial capability, and HUB subcontracting compliance. Qualified respondents must possess at least five years of business experience and provide detailed personnel certifications, including QEI-1 inspectors. Submission requirements are stringent, requiring separate documents for pricing, execution of proposal, and vendor qualifications, as well as a mandatory Subcontracting Plan and Texas Family Code certification. Financial stability is verified through the submission of financial statements from the past three years. For evaluation purposes, the estimated contract value is set at 225,000 dollars, with pricing based on hourly rates for mechanics and helpers, monthly maintenance fees, and a percentage markup for parts.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Lubbock DHQ Site Generator Addition, Lubbock District

Solicitation # 05-470426729R

POSTED

DEADLINE

in about 1 month

Solicitation # 6511-08-001

The Texas Department of Transportation has issued a solicitation titled HOT MIX under solicitation number 6511-08-001. This SLED organization opportunity was posted on September 23, 2026, and requires responses to be submitted by the deadline of November 18, 2026. The place of performance for this contract is located in Madison, Texas. Interested parties can find further details and submission guidelines through the provided bid portal link.

Asphalt Paving Mixture and Block Manufacturing

POSTED

DEADLINE

in about 2 months

Solicitation # 6511-06-001

The Texas Department of Transportation has issued a solicitation titled HOT MIX under solicitation number 6511-06-001. This SLED organization contract is for performance in Freestone, Texas, with a posting date of September 23, 2026. Interested parties must submit their responses by the deadline of November 17, 2026. Further details and application instructions can be accessed through the provided bid portal link.

Asphalt Paving Mixture and Block Manufacturing

POSTED

DEADLINE

in about 2 months

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS