Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONDUIT, NONMETALLIC

Active
SPE4A7-26-T-614NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of 35 feet of nonmetallic spiral plastic conduit with a nominal length of 18 feet per unit, designated by NSN 5975-01-465-7129, under solicitation SPE4A7-26-T-614N. The item is classified as a critical application product and must comply with SAE AS81914/1 Revision A dated January 1, 2014, and SAE AS81914 Revision A dated March 1, 2024, with technical and quality requirements defined by the DLA Master List of Technical and Quality Requirements, which take precedence over any commercial standards. Manufacturing must be performed by an accredited facility listed on the Performance Review Institute’s Qualified Manufacturers List or Qualified Products List, and sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with attribute verification levels tied to AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor defects respectively. The conduit is subject to DLA packaging specifications, requiring compliance with MIL-STD-129 for marking and labeling, ASTM D3951 for commercial packaging if nonhazardous, or TQ requirement IP025 if hazardous per FED-STD-313, with all packaging palletized per RP001. The item may be sourced from General Motors Corporation, Military Vehicles Operation, under BOA DAAE07-85-G-J001, and minimum order quantities and pricing must be confirmed directly. Delivery is FOB origin with a 171-day lead time, an acceptable quantity variance of plus or minus 10%, and inspection and acceptance points at destination. The required delivery date is March 21, 2027, with a need ship date of January 31, 2027, and all shipments must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, following DLAD Proc Note C19 and C20 for transportation routing.

General Info

Procure 35-foot nonmetallic spiral plastic conduit per SAE AS81914, QML-manufactured, zero defects, FOB origin, delivery by March 21, 2027, to New Cumberland PA.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

326220 - Rubber and Plastics Hoses and Belting ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-614N.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
JESSICA GENTRY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONDUIT,NONMETALLIC
TUBING,PLASTIC,SPIRAL
LENGTH 18 FEET NOMINAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS NSN IS LISTED AS A PRIMARY QPL OR QML
THEREFORE THE QUALIFIED PRODUCTS LIST OR
QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
THIS ITEM MAY BE ACQUIRED FROM GENERAL MOTORS
CORPORATION, MILITARY VEHICLES OPERATION, CAGE
7X677, BOA DAAE07-85-G-J001 OR SUCCEEDING BOA.
CONTACT 7X677 FOR MINIMUM ORDER QUANTITY AND
RELATED PRICE. IF MINIMUM ORDER QUANTITY EXCEEDS
INSTANT BUY QUANTITY AND TOTAL PURCHASE PRICE
JUSTIFIES REVIEW, CONTACT ITEM MANAGER TO SEE
IF BUY QUANTITY WILL BE INCREASED. SAM KEGLEY,
SVS, 88243, (614) 692-4201.
THIS IS A PERFORMANCE REVIEW INSTITUTE (PRI) QML OR QPL ITEM. PRODUCT
SUPPLIED TO THIS SPECIFICATION SHALL BE MANUFACTURED BY AN ACCREDITED
MANUFACTURER (FOR COMPONENTS) AND/OR ASSEMBLED BY AN ACCREDITIED
MANUFACTURER OR ACCREDITED ASSEMBLING DISTRIBUTOR (FOR ASSEMBLIES) AS
LISTED IN THE PRI QUALIFIED MANUFACTURER LIST (QML)OR QUALIFIED PRODUCTS
LIST (QPL) FOR THIS STANDARD. THE QML OR QPL IS AVAILABLE AT
WWW.EAUDITNET.COM.
SPE4A7-26-T-614N
SECTION B
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RT001: MEASURING AND TEST EQUIPMENT
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC NON GOVT STD SAE AS81914/1 REVISION NR A DTD 01/01/2014 PART PIECE NUMBER: M81914/1-1110
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD SAE AS81914 REVISION NR A DTD 03/01/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017742335 0001 FT 35.000
NSN/MATERIAL:5975014657129
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE4A7-26-T-614N
SECTION B
PR: 7017742335 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/31/2027 Original Required Delivery Date:03/21/2027
SPE4A7-26-T-614N NSN/Part Number: 5975-01-465-7129 Quantity: 35 FT Purchase Request: 7017742335QTY: 35 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M0-26-T-030Q
This contract specifies the procurement of a nonmetallic hose assembly with the NSN 4720-01-710-6978 and part number 12647529-2, requiring strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. The item is classified as a TYPE I (CODE W) with a non-extendable shelf life of 120 months, and supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Notes #C03 from August 2016. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 for shelf-life identification, and palletization must meet DLA packaging requirements. The item is subject to full and open competition with no quantity variance allowed, and delivery is required within five days FOB origin to Fort Bliss, Texas, via traceable freight methods excluding parcel post. The contract is issued under solicitation SPE7M0-26-T-030Q with a required delivery date of August 4, 2026, and a response deadline of August 17, 2026. The unit of issue is each (EA), with a single unit priced at $1.00, and the point of contact is Abaigael Masterson of the Department of Defense’s Maritime Supply Chain ESOC. All technical data packages reference specific drawings dated between 2015 and 2026, and the item must be shipped via government-designated logistics channels using the provided freight and marking instructions. Government-use fields include internal identifiers such as IPD, DIC, and ADV codes, and the procurement falls under NAICS code 326220 for rubber product manufacturing.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326220
New
DIBBS
BELT, V
Solicitation # SPE7LX-26-U-9225
This contract is for the procurement of 591 units of a V-belt, cogged or notched, identified by NSN 3030-00-294-9785 and part number AX56, sourced from approved suppliers including Gates Corporation, Dayco Products Inc, and Contitech USA Inc. The item is covered under DLA Direct, CONUS, with a total price of $591.00 at $1.00 per unit, and delivery is required within 70 days FOB origin. The quantity is fixed with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and fully adhere to MIL-STD-129 for marking and labeling, with palletization following DLA Packaging Requirements RP001. All technical and quality requirements referenced by R or I numbers in the DLA Master List of Technical and Quality Requirements supersede any other standards. The solicitation is a total small business set-aside under NAICS code 326220, issued under contract number SPE7LX-26-U-9225, with a response deadline of August 19, 2026, and a posted date of August 4, 2026. The primary point of contact is Theodore Misiolek of the Strategic Acquisition Program Directorate, Department of Defense.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M9-26-Q-0036
The contract is for seven units of a hose assembly, nonme, identified by NSN 4720-01-649-7970, under solicitation SPE7M9-26-Q-0036, which is a total small business set-aside for NAICS code 326220. The pricing is firm fixed price with zero variance allowed in quantity, and delivery is required 106 days after the award date to the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, with all supplies subject to packaging requirements per MIL-STD-2073-1E and DLA standards, including specific marking per MIL-STD-129 and no special markings. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on the acquisition size. The item must be delivered in accordance with DLA Procurement Notes C19 and C20 regarding transportation and freight, and the packaging must adhere to prescribed materials, cushioning, containment, and palletization standards. The Government point of contact is Jennifer Hopkins, and the purchase request number is 7005352642 with a required ship date of May 30, 2024.
ELECTRICAL DEVICES DIV

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 326220
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-299T
This contract is for the procurement of four units of a flexible air duct hose, identified by part number DAYFLEX DFD-T and NSN 4720-01-668-9666, under solicitation SPE7M4-26-T-299T. The supplier must deliver the items within 20 days of award, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific marking and palletization requirements as defined by DLA packaging standards. The product is exempt from shelf life restrictions and strictly forbidden from containing any Class I ozone-depleting chemicals, with any substitutes requiring prior approval unless explicitly permitted by the specification. The items are destined for distribution through the DLA logistics network, with primary delivery to M29021 at Camp Kinser, JP, and tracking reference M20220. The unit of issue is each, priced at $4.00 per unit for a total of $16.00, and the contract mandates adherence to all applicable technical and quality requirements referenced through the DLA Master List. The solicitation was posted August 4, 2026, with responses due by August 17, 2026; the required delivery date is July 31, 2026, and the contract is associated with project TP 2 and a government use identifier IPD 05.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY SET, N
Solicitation # SPE7M0-26-T-030N
The contract pertains to a single unit of a hose assembly set with NSN 4720-01-578-9052 and part number 2605808 supplied by Caterpillar Inc, designated under solicitation SPE7M0-26-T-030N. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance—exactly one unit must be delivered. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while strictly adhering to DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. All packaging and labeling must conform to MIL-STD-129, with palletization following DLA’s RP001 procurement packaging guidelines. The unit of issue is one each, and the required delivery date is August 4, 2026. The shipment is destined for Prince Sultan AB, Saudi Arabia, with the government freight shipping and markfor address matching the military logistics facility W8000V. Transportation and shipment procedures must follow DLAD PROC NOTES C19 and C20. The contract requires the supplier to remove any government identification from non-accepted supplies, and all documentation must reflect the correct unit of issue as defined by DoD standards. The point of contact is Abaigael Masterson of the Department of Defense’s Maritime Supply Chain ESOC, with the solicitation posted August 4, 2026, and responses due by August 17, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326220
New
DIBBS
BELT, V
Solicitation # SPE7L1-26-T-911S
The contract specifies the supply of one Belt, V with NSN 3030-01-497-7416, under solicitation SPE7L1-26-T-911S, and requires delivery within 20 days to the destination FPO AP 96672 aboard the USS MOMSEN DDG 92. Strict prohibitions are in place against intentional addition or direct contact of mercury or mercury-containing compounds with supplied hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents authorized by NAVSEA. Portable devices containing mercury must be shock-proof and include a secondary containment barrier compliant with NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required, and palletization must follow DLA Packaging Requirements (RP001). All shipments must use the fastest traceable means and are prohibited from parcel post; transportation guidelines are governed by DLAD Proc Notes C19 and C20. The unit of issue is each (EA), with zero variance allowed on quantity, and inspection and acceptance occur at the destination. The contract references DLA’s Master List of Technical and Quality Requirements for incorporated technical specifications and requires compliance with the revision in effect on the solicitation issue date. Delivery is FOB destination, and the original required delivery date is July 31, 2026.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326220
New
DIBBS
BELT, V
Solicitation # SPE7LX-26-U-9227
This contract pertains to the procurement of a V-belt with NSN 3030-00-160-8285 and part number A27, supplied by CONTITECH USA, INC, under solicitation SPE7LX-26-U-9227. The requirement is for 1,052 units to be delivered FOB origin within 56 days, with no variance allowed in quantity. The item is classified as a Type I shelf-life item with a non-extendable shelf life of 84 months, and at least 71 months of shelf life must remain upon delivery. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 indicating Type I shelf life, and palletization must meet DLA packaging standards. The contract explicitly prohibits the use of ozone-depleting chemicals and mercury or mercury-containing compounds in the product, preservation, packaging, or marking, with limited exceptions for functional mercury in specific applications such as batteries, fluorescent lights, and weapon systems, provided they meet additional containment requirements. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and for this simplified acquisition, the version in effect on the solicitation issue date applies. The contract is a Total Small Business Set-Aside under NAICS code 326220, with Theodore Misiolek designated as the primary point of contact for inquiries.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M0-26-T-028V
The contract is for a single nonmetallic hose assembly identified by NSN 4720-01-596-1146 and part number 2266588, with a required delivery of five days from the award date and a firm delivery date of August 3, 2026. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including compliance with MIL-STD-129 for marking and labeling, and RP001 for packaging standards. The unit of issue is one each, with zero variance allowed, and the delivery is FOB origin. Inspection and acceptance occur at the destination. The shipment must be sent via traceable freight, excluding parcel post, and shipped to Fort Leonard Wood, Missouri, with specific military logistics identifiers required. The supplier must remove all government identification from non-accepted items, and the contract is governed by the version of the DLA Master List in effect on the solicitation issue date. The solicitation number is SPE7M0-26-T-028V, under NAICS code 326220, issued by the Department of Defense through the Maritime Supply Chain ESOc Buys office, with a response deadline of August 17, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326220
New
DIBBS
BELT, V
Solicitation # SPE7L1-26-T-913V
The contract pertains to the procurement of one V-belt identified by NSN 3030-01-238-2369 and part number 705K6, with a required delivery within five calendar days from the order date under the solicitation SPE7L1-26-T-913V. The item must be supplied in strict compliance with DLA packaging standards, specifically ASTM D3951 and MIL-STD-129 for marking and labeling, with all packaging palletized per RP001 requirements and subjected to the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. The delivery is to be made FOB origin to Fort Bliss, Texas, using a traceable freight method and explicitly excluding parcel post, with the shipment designated as RDD/NCMS and marked to the designated government shipping point. The item must also be uniquely identified in accordance with MIL-STD-130N, with specific part numbers and vendor codes including General Motors LLC, Dayco Products Inc., and Carlisle Power Transmission, ensuring proper government property traceability. The purchase quantity is one unit at a unit price of one dollar, with no allowable variance in delivery quantity. The contract includes a required delivery date of August 4, 2026, and the solicitation response deadline is August 17, 2026, with inspection and acceptance occurring at the destination point, governed by DLA policies and assigned government administrative codes for tracking and funding purposes.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326220
New
DIBBS
BELT, POSITIVE DRIVE
Solicitation # SPE7L1-26-T-911R
The contract requires the delivery of one positive drive belt, identified by NSN 3030-01-497-7413 and part number H329, furnished by Boston Machinery Inc from Peabody MA, under solicitation SPE7L1-26-T-911R. The item must be delivered within 20 days FOB destination to the USS MOMSEN DDG 92 at FPO AP 96672, with no variance allowed in quantity, and inspection and acceptance occurring at the delivery point. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container specifications, while marking must follow MIL-STD-129 without special codes. Palletization adheres to DLA packaging requirements, and shipment must be transported via the fastest traceable method, explicitly prohibiting parcel post. The contract strictly prohibits intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except for specified functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and naval reagents, with additional containment requirements for portable devices. The supplier must ensure compliance with MIL-STD-130N for identification marking and reference the DLA Master List of Technical and Quality Requirements for all applicable R and I numbers. The original required delivery date is July 31, 2026, and the contract is issued under DoD procurement rules with a single unit of issue and total price of one unit.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7L1-26-T-914J
The contract specifies the procurement of one hose assembly, nonmetallic, with NSN 4720-01-579-3797 and part number 2385587 from Caterpillar Inc, under solicitation SPE7L1-26-T-914J. The item must be delivered within ten days to the designated military facility at Prince Sultan Air Base, Saudi Arabia, with delivery terms set as FOB origin and no tolerance for quantity variance. Inspection and acceptance are to occur at the destination point. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization governed by DLA Packaging Requirements for Procurement (RP001), and all technical and quality standards referenced by R or I numbers from the DLA Master List take precedence. The unit of issue is each, and the contract includes specific freight and shipping instructions tied to DLAD PROC NOTE C19 and C20, with the shipment designated as RDD 555. The original required delivery date is July 30, 2026, and the point of contact for inquiries is Kristina Derry of the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M0-26-T-029Y
The contract is for a single nonmetallic hose assembly with NSN 4720-01-710-6973, issued under solicitation SPE7M0-26-T-029Y by the Department of Defense through the Maritime Supply Chain ESOC Buys unit. The item is required for delivery to Fort Bliss, Texas, within five days of award, and full and open competition is applicable. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date. The product is not subject to shelf life limitations but is subject to strict export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons, including foreign nationals within the United States. Compliance with DFARS 252.225-7048 is mandatory, and only contractors approved by DLA with JCP certification, completed training on handling controlled data, and approval to access such data may receive the technical information. Cybersecurity requirements mandate CMMC Level 2 certification by a C3PAO, and additional requirements include removal of government identification from non-accepted supplies, physical marking of the bare item, and protection of covered defense information. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A7-26-T-611K
The contract specifies the procurement of 62 boxes of blind rivets with NSN/Part Number 5320-01-330-2847 under solicitation SPE4A7-26-T-611K, with a response deadline of August 12, 2026, and a delivery requirement within 171 days after award. The item is designated as a critical item requiring origin inspection, and all supplies must comply with detailed technical and quality requirements indexed by R or I numbers referenced in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to DLA standards, and documentation for source approval is mandatory. Government identification must be removed from non-accepted supplies, and inspection and acceptance will occur at the origin. Covered defense information is potentially applicable, and tailored higher-level quality requirements govern both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, with Brad Ingram of the Department of Defense, ASC Supplier Operations AE and AF Division, serving as the primary point of contact.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DRUM ASSEMBLY, WINCH
Solicitation # SPE4A7-26-T-615R
The contract is for the procurement of seven drum assemblies for winches with part number 9-14986 and NSN 1680-00-229-9128, under solicitation SPE4A7-26-T-615R. Delivery is required within 171 days of award, with performance to occur at Tinker AFB, Oklahoma. The solicitation, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, closed for responses on August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent configuration management, inspection at origin, and export control regulations under ITAR or EAR, restricting technical data access to contractors with approved JCP certification, completed DOD export training, and formal DLA authorization. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Physical marking of bare items and controlled handling of technical data are mandatory per DFARS 252.225-7048. All data sharing involving foreign persons, including U.S. subsidiaries and foreign nationals within the United States, is prohibited without prior government authorization.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
KEYBOARD, DATA ENTRY
Solicitation # SPE4A7-26-T-615E
The contract is for the procurement of 13 keyboard, data entry units with NSN/Part Number 5895-01-587-7441, classified as a commercial off the shelf item. The solicitation number is SPE4A7-26-T-615E, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 12, 2026, and a required delivery date 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided website, with the revision in effect on the solicitation issue date or award date controlling based on acquisition size and any applicable amendments. Government identification must be removed from non-accepted supplies as per RQ011. The place of performance is designated as San Diego, CA, with Michael Johnson serving as the primary point of contact via email and phone. The NAICS code is 334511, and the procurement falls under federal acquisition guidelines without a specified set-aside type.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, MACHINE THREAD
Solicitation # SPE4A7-26-T-610X
This contract is for the procurement of 1,854 units of a machine thread bushing identified by NSN 5365-01-270-7546, under solicitation SPE4A7-26-T-610X, with a response deadline of August 12, 2026, and a delivery timeline of 128 days after award. The item is classified as a commercial item and is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which must be adhered to based on the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed. The item must be physically marked as specified, and any technical data associated with it is subject to export controls under ITAR or EAR, requiring prior authorization for disclosure to foreign persons or entities, including foreign nationals within the U.S. Only contractors with JCP certification, approved training completion, and DLA authorization may access this controlled technical data. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 332510 and is managed by the Department of Defense through the ASC Supplier Oper AE and AF DIV, with performance expected in Texarkana, Texas, and primary point of contact being Jamiah Sutton.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-613C
The contract pertains to the procurement of a SHIM part identified by NSN 5365-01-725-5627 and part number 56767-1, manufactured in compliance with Basic Drawing NR 70210 56767 Revision D dated 11/07/1955. A total of 21 units are to be delivered FOB origin with zero variance allowed in quantity, and delivery must be completed within 171 days from the contract award, with an original required delivery date of January 7, 2027, and a need ship date of January 31, 2027. Inspection and acceptance occur at the origin, and packaging must conform to MIL-STD-2073-1E with designated preservation methods, materials, and unit packaging details, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and the delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined by the drawing or specification. The supplier must comply with DLA’s Master List of Technical and Quality Requirements identified by R or I numbers, including specific provisions for removal of government identification, physical marking of bare items, and documentation for source approval requests. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and covered defense information is subject to RD002 controls. Documentation for source approval must meet RC001 standards, and all units must be shipped in accordance with DLA transport and freight procedures. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under contract number SPE4A7-26-T-613C, and the primary point of contact is Jessica Gentry.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PISTON, HYDRAULIC AC
Solicitation # SPE4A7-26-T-612C
The contract specifies the procurement of two hydraulic pistons for air conditioning systems under NSN 1650-01-517-7844 and part number 11463841 from RANDOLPH & BALDWIN, INC. Delivery is required FOB origin within 171 days, with no variance allowed in quantity, and inspection and acceptance are to occur at the manufacturer’s location. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must follow MIL-STD-129 and RP001 guidelines. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Quality management systems must meet ISO 9001:2015, and measuring equipment must meet RT001 standards. Physical identification and bare item marking are mandatory per RQ017. The contract references revision B of drawing NR 18876 dated 08/13/1997 and revision D dated 07/02/1985, with a newer revision dated 03/14/2024 governing the current requirement. The item must be delivered to the DLA Distribution facility in New Cumberland, PA, with the original required delivery date set for January 27, 2027, and an anticipated ship date of January 31, 2027. The contract was solicited under SPE4A7-26-T-612C, classified under NAICS 336413, with Jamiah Sutton as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
VIBRATION ISOLATOR,
Solicitation # SPE4A7-26-T-612K
The contract pertains to the procurement of 605 units of a vibration isolator, identified by NSN 1680-01-552-5433 and part number 51037 from TECH PRODUCTS CORP, under solicitation SPE4A7-26-T-612K. Delivery is required within 67 days of order placement, with FOB origin terms and inspection and acceptance occurring at the destination. The quantity is fixed with no tolerance for variance, and packaging must comply with ASTM D3951 while adhering strictly to MIL-STD-129 for marking and labeling, with palletization governed by DLA’s RP001 packaging requirements. The DLA Master List of Technical and Quality Requirements supersedes any conflicting standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item is designated as a critical application component and must be physically marked per RQ017. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. The delivery address is DLA Distribution Jacksonville, and transportation guidelines reference DLAD Proc Notes C19 and C20. The original delivery requirement is set for December 12, 2026, with a needed ship date of July 15, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SAFETY CABLE KIT
Solicitation # SPE4A7-26-T-614C
The Safety Cable Kit is procured under NSN 5342-01-625-3947 with a total quantity of 16 packaging groups, where each packaging group contains 50 individual kits, resulting in 800 total kits. Each kit consists of a cable and a magazine, and each magazine is preloaded with 50 ferrules compliant with specification AS3510-0312K. The unit of issue was changed to packaging group (PG) on April 1, 2022, and all items must adhere to DLA packaging requirements for procurement. Physical identification and bare item marking are mandated, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances allowed unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the manufacturer’s origin, and the item is procured competitively under a military specification. The contract solicitation number is SPE4A7-26-T-614C, with a response deadline of August 12, 2026, a posting date of August 4, 2026, and a delivery requirement 171 days after award. The point of contact is Jamiah Sutton of the Department of Defense’s ASC Supplier Oper AE and AF Division, and the place of performance is New Cumberland, Pennsylvania, with NAICS code 332510 applicable.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
CORE ASSY BOND, SPEC
Solicitation # SPE4A7-26-T-612N
This contract pertains to the procurement of a CORE ASSY BOND, specified under part number LM-200-158 and NSN 2995015940126, with a quantity of 20 units to be delivered FOB origin within 171 days from the contract date. The delivery is to be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The item is designated as a critical application item, triggering stringent compliance requirements including compliance with CMMC Level 2 Self-Assessment and strict physical identification and bare item marking protocols. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and DLA packaging guidelines, with palletization following RP001 specifications. All samples must be inspected using zero-based sampling per MIL-STD-1916 or ASQ H1331, Table 1, with acceptance thresholds of zero non-conformances unless otherwise directed; attributes are classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes default to major. Measurement and test equipment must meet RT001 standards, and documentation for source approval requests is required under RC001. Removal of government identification from rejected items is mandatory under RQ011, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers under RQ001. The contract is under solicitation SPE4A7-26-T-612N, issued by the Department of Defense, with a response deadline in August 2026 and a required delivery date of May 23, 2027. No quantity variance is permitted, and the unit of issue is each, with full compliance with DLA’s authorized unit of issue framework.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-612E
The contract pertains to the procurement of SHIM with NSN 5365-01-472-5933, totaling 117 units, under solicitation number SPE4A7-26-T-612E, which was posted on August 4, 2026, with responses due by August 12, 2026. The item is subject to strict export control regulations under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons, regardless of location, requires prior authorization from the U.S. Department of State or Department of Commerce. Foreign nationals employed by U.S. companies or subsidiaries are equally restricted, and compliance with DFARS 252.225-7048 is mandatory. Distribution is limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD training on handling export-controlled data, and have successfully submitted the DLA Export-Controlled Technical Data Questionnaire, all while receiving formal approval from the DLA controlling authority. The place of performance is specified as New Cumberland, Pennsylvania, with a delivery timeline of 171 days after contract award. The contracting office is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact Brandon Smith reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHACKLE
Solicitation # SPE4A7-26-T-614L
This contract, identified by solicitation number SPE4A7-26-T-614L, is for the procurement of 99 units of a shackle with NSN 4030-01-657-5940 and part number 10823-17279 from Fastenal Company Div Oshk, CAGE code 3SPK0. The item must be delivered FOB origin with no variance in quantity and is subject to destination inspection and acceptance. The required delivery date is December 4, 2026, with an allowable delivery window of 171 days, and the shipment must be prepared by January 31, 2027. Packaging and labeling must comply strictly with MIL-STD-129 and ASTM D3951, with packaging requirements subordinate to the DLA Master List of Technical and Quality Requirements. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001). All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List in effect on the solicitation issue date, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are deemed major. The unit of issue is each (EA), priced at $99.00, for a total value of $9,801. The delivery destination is DLA Distribution Barstow, Central Receiving Warehouse 7, with specific contact details provided. Transportation and shipping instructions must follow DLAD Proc Notes C19 and C20. The contract includes mandatory physical marking of the item as specified under RQ017 and requires removal of government identification from non-accepted supplies as per RQ011.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-614K
The contract pertains to the procurement of a single unit of DUCT ASSEMBLY,AIR C with NSN/Part Number 0001S00000052, under solicitation SPE4A7-26-T-614K, with a delivery requirement of 260 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed or transferred to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled technical data, and approved access via the DLA questionnaire are permitted to receive or work with this information. The procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance scheduled for Key West, Florida, 33040-9059, and the primary point of contact is Georgina Vass at georgina.vass@dla.mil. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, under a federal contracting mechanism with NAICS code 331491.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details