Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

CONNECTING LINK, HIN

Active
SPE7M4-26-T-266XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of five Connecting Links, Hinge Side, identified by NSN 2040-01-449-9765, under solicitation SPE7M4-26-T-266X issued by the Defense Logistics Agency’s Fluid Handling Division. Delivery is required 85 days after date of order, with a final delivery deadline of October 14, 2026, and shipment must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, under FOB Origin terms. The item is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and the specification explicitly incorporates export control requirements under ITAR or EAR, restricting access to contractors approved through the US/Canada Joint Certification Program, who have completed required export control training and questionnaire. The contract mandates compliance with MIL-STD-2073-1E for packaging and preservation, and MIL-STD-129 for labeling and barcoding, with preservation codes specified for method, cleaning, and preservative materials. The contract enforces federal regulatory compliance including cybersecurity protections under DFARS 252.204-7012 for safeguarding covered defense information, prohibitions on hexavalent chromium and hazardous materials under DFARS 252.223-7008 and 252.223-7001, and mandatory Safety Data Sheets aligned with OSHA standards. Contractors must also adhere to Clause 52.222-54 on employment eligibility verification, FAR 52.223-23 on sustainable products, and combat trafficking in persons requirements. Inspection and acceptance are to occur at destination under Government authority, with zero non-conformances required for critical items as per MIL-STD-105 and ASQ Z1.4 standards. The contract utilizes FAR 52.216-1 Alternate I for contract type, though the specific type is left blank, and includes multiple DFARS clauses on whistleblower rights, information safeguarding, and covered defense telecommunications equipment disclosures. Offerors must submit Unique Entity ID, CAGE code, and proper socioeconomic certifications, with electronic submission mandated via the DIBBS portal by July 27, 2026, and all invoicing required through WAWF. No pricing information is provided in the solicitation, and evaluation factors for award are not specified in

General Info

Procure five hinge side links under DLA solicitation, deliver to New Cumberland by Oct 14, 2026, comply with ITAR, MIL-STD, and federal regulations.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-266X for DLA Fluid Handling Division

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS

Full Description

Show more
CONNECTING LINK,HIN
CONNECTING LINK,HINGE SIDE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2040-01-449-9765 Quantity: 5 EA Purchase Request: 7017528944QTY: 5 Delivery: 85 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
RETAINING RING, GLANThis contract is for the procurement of two retaining rings, GLAN, with NSN 5365-01-096-3593 and part numbers 1386F56P06 and 1386F64H01, supplied by Northrop Grumman Systems Corporation under solicitation SPE4A6-26-T-07JF. The items are classified as critical application components requiring strict compliance with DLA packaging, marking, and quality requirements, including adherence to MIL-STD-2073-1E for preservation and MIL-STD-129 for labeling, with no special marking permitted. The contract mandates zero tolerance for mercury or mercury-containing compounds in any phase of manufacturing, packaging, or preservation, except for specific functional applications explicitly authorized by NAVSEA, which must include secondary containment for portable devices. Sampling and inspection follow MIL-STD-1916 or equivalent zero-defect acceptance criteria, with verification levels assigned based on attribute criticality, and no item uniqueness marking is required per Service customer direction. Delivery is FOB origin with a strict quantity variance of plus or minus zero percent and must be completed in 169 days, with the original delivery deadline set for September 27, 2028, and the requested ship date of January 10, 2027. The contract incorporates all relevant technical and quality requirements from the DLA Master List, including tailored higher-level quality provisions applicable to both manufacturers and non-manufacturers, source approval documentation, and procedures for removing government identification from non-accepted supplies. Packaging must conform to RP001 standards and be palletized accordingly, with all materials compliant with IP056's mercury prohibition. Inspection and acceptance occur at the destination facility at the DLA Distribution New Cumberland facility in Pennsylvania, with transportation details governed by DLAD procedural notes. The solicitation is a total small business set-aside under NAICS code 332510, issued by the Department of Defense’s ASC Commodities Division, with Christian Ray as the primary point of contact. The unit of issue is each, with a total contract value of $4.00 for the two units, and all documentation must align with DLA’s authorized unit of issue standards.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RINGThis contract specifies the procurement of a spacer, ring with NSN 5365-01-307-9609 and part number 7451FT-4780 manufactured by Greene Tweed & Co Inc, with a total quantity of 35 units to be delivered FOB origin within 114 days of the contract award. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers including tailored higher-level quality standards, inspection and acceptance at origin, and removal of government identification from non-accepted supplies. Documentation must adhere to DLA packaging requirements per RP001 and MIL-STD-2073-1E, with packaging coded as U and marking in accordance with MIL-STD-129 without special markings. Sampling shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are to be verified at levels VII, IV, and II respectively. Measuring and test equipment must meet RT001 standards, and the unit of issue is each (EA) with no quantity variance permitted. Delivery is to DLA Distribution Depot Hill in Hill AFB, Utah, and transportation logistics comply with DLAD Proc Notes C19 and C20. The original required delivery date is March 9, 2027, with a need ship date of November 8, 2026, and the contract was issued under solicitation SPE4A7-26-T-561G with a response deadline of July 21, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, BOWThe contract pertains to the procurement of 18 units of a HANDLE, BOW item with NSN 5340-01-647-4423 under solicitation SPE7L1-26-T-790U, issued by the Department of Defense’s Land Supply Chain through DLA Land and Maritime. Delivery is required within 53 days ADO to the specified location in New Cumberland, Pennsylvania, with FOB ORIGIN terms governing shipment responsibility. All items must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and packaging must conform to MIL-STD-129 for marking, labeling, and bar-coding, as well as RP001 for DLA packaging standards. Non-hazardous materials must adhere to ASTM D3951, while hazardous materials are subject to FED-STD-313 and 29 CFR 1910.1200, requiring prior approval of hazard labels if not pre-listed. The contract mandates compliance with FAR clauses including 52.216-1 Alternate I for fixed-price contract type, 52.223-7001 for hazardous material labeling, 52.223-3 for hazardous material identification, and 52.227-1 Alternates I and II for authorization and consent. Electronic invoicing is mandatory via WAWF using approved document types such as Invoice and Receiving Report Combo. The offeror must hold a valid UEI and CAGE code and is required to submit socioeconomic certifications, including whether the entity qualifies as a small business, HUBZone, SDVOSB, WOSB, or EDWOSB, with representations to be validated in SAM. Inspection and acceptance occur at the destination, performed by the government, with adherence to FAR 52.246-1. Proposals must be submitted through DIBBS by July 16, 2026, with no amendments currently issued. Payment administration will follow DoDAAC routing in WAWF, though specific payment office details are not provided. No evaluation factors, contract value, or option clauses are specified in the solicitation, and no attachments or formal Section J list is present. The contract type will be finalized upon award, contingent on the selected vendor’s compliance with all technical, quality, packaging, labeling, and regulatory mandates
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
YOKE BUSHINGThe contract pertains to the procurement of 29 yoke bushings, identified by NSN 5365-01-463-3947 and part number 650301-D35, for use in L3Harris Maritime Power & Energy systems. Delivery is required within 168 days of contract award, with shipment FOB origin and final inspection and acceptance occurring at the destination—DLA Distribution’s New Cumberland, Pennsylvania facility. The items must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking codes required. Preservation methods must adhere to MIL-PRF-23199E, and barcoding must follow ISO/IEC 16388. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemically specified reagents, with portable mercury-containing devices required to have shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Sampling for quality assurance must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required unless otherwise specified. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The unit of issue is each (EA), with no variance allowed in quantity.
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 4 days
View Details