Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CONNECTING LINK, RIG

Active
SPE7L3-26-T-124TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of two rigid connecting links for the main landing gear of military equipment, identified by NSN 3040-00-001-3669, with a delivery requirement of 427 days after award. The technical specifications require adherence to SAE AMS-A-225 instead of QQ-A-225, surface roughness compliant with ASME B46.1, geometric tolerancing per ASME Y14.5, and marking in accordance with MIL-STD-130 in place of IM-8. Ozone-depleting chemicals are strictly prohibited, and any substitutions must be approved unless explicitly permitted by the specifications. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; only contractors with approved JCP certification, completed DLA training, and authorized access may receive the controlled data. Cybersecurity maturity is mandated at CMMC Level 2, and the contractor must comply with DLA’s packaging standards, tailored quality requirements, and configuration change management through formal engineering change proposals. Inspection and acceptance must occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. Full and open competition applies, with no set-aside, and all technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements in effect at the RFP issue date. The contracting activity is the Department of Defense, Land Supplier Operations Vehicle Support, with the point of contact listed as Karen McCarley, and performance is designated to Jacksonville, Florida.

General Info

Procure two rigid landing gear links per strict military specs, deliver in 427 days, CMMC Level 2, ITAR-controlled, JCP-certified contractor only.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

BLDG 175 SWAN ROAD, JACKSONVILLE, FL, 32212-0103, US

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-124T.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Karen McCarley
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTING LINK,RIG
CONNECTING LINK, RIGID.
(RETRACTION CYLINDER MLG).
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) -------------------------------------
EXCEPTION TO DRAWING:
USE SAE AMS-A-225 IN LIEU OF QQ-A-225
-------------------------------------
ENGINEERING DATA REQUIREMENTS: (HILL AFB FORM 462)
MARKING PER MIL-STD-130 IN LIEU OF IM-8. MINIMUM MARKING REQUIREMENTS APLY.
SURFACE ROUGHNESS PER ASME B46.1 IN LIEU OF MIL-STD-10.
GEOMETRICAL TOLERANCING PER ASME Y14.5 IN LIEU OF 20Y201.
FULL AND OPEN COMPETITION APPLY
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
SPE7L3-26-T-124T
SECTION B
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3040-00-001-3669 Quantity: 2 EA Purchase Request: 7016080307QTY: 2 Delivery: 427 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGThe contract is for the procurement of a rigid connecting link with NSN 3040-01-453-7810 and part numbers 17B9F1112-551 from The Boeing Company and 4609-551 from Tyee Aircraft Inc, under solicitation SPE7L4-26-U-0984. The item is classified as a critical application component for military use and is subject to stringent technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. The contract specifies a quantity of 15 units at a unit price of $15.00, for a total value of $225.00, with zero variance allowed in quantity. Delivery is required within 259 days FOB origin, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-129 for marking and labeling, palletization must adhere to RP001 DLA Packaging Requirements, and all packaging must also meet ASTM D3951 unless overridden by the DLA Master List. The item is procured under DLA Direct CONUS coverage, and the unit of issue is each. The contract was posted on July 21, 2026, with proposals due by August 5, 2026, under NAICS code 333613, and is managed by the Department of Defense’s Combat Vehicles and Armament office, with Heather Kessler as the point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHTThe contract pertains to the procurement of a straight shaft identified by part number 392184-7 and NSN 3040-01-544-1203, with a quantity of 14 units to be delivered FOB origin in accordance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. The item is classified as a critical application item under Lockheed Martin Corp and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, indicated by R or I numbers. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stipulated, and attributes are to be classified with corresponding verification levels or AQLs. Packaging must adhere to DLA-specific guidelines including palletization and the use of specified preservation methods and materials, with no special marking required. Delivery is required within 171 days of order placement, with an original required delivery date of May 13, 2027, and a need ship date of January 17, 2027. The destination for delivery is the DLA Distribution San Joaquin facility in Tracy, California, with inspection and acceptance occurring at the destination. No quantity variance is permitted, and the unit price is $14.00 per unit for a total contract value of $196.00. The contract is issued under solicitation number SPE4A5-26-T-303C, with a response deadline of July 29, 2026, and is categorized under NAICS code 333613. Transportation instructions are governed by DLA procedural notes C19 and C20, and the unit of issue is EA as defined by DLA standards. The point of contact for the contract is Hope Scott of the Department of Defense’s ASC Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
GEAR, SPECIAL
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
CASING, FLEXIBLE SHAThe contract pertains to the procurement of a flexible shaft casing assembly, identified by part number 10053603 and NSN 3040-01-525-0768, with a quantity of four units. The item is classified as a critical application item and is being procured under DLA Direct, CONUS coverage, with delivery required within 177 days FOB origin. The quantity is fixed with no variance allowed, and both inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence over this standard. All packaging and labeling must conform to MIL-STD-129, and palletization must adhere to the DLA Packaging Requirements for Procurement. The unit of issue is each, with a total contract value based on an estimated quantity, and the item is not guaranteed to be purchased by the IDC. The contract is issued under solicitation SPE7L3-26-U-0639, with a response deadline of August 5, 2026, and is classified under NAICS code 333613. The contracting office is the Department of Defense, Land Supplier Operations Vehicle Support, with Stephen Weaver as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
COLLAR, SHAFTThe contract is for the procurement of one collar, shaft with NSN 3040-01-658-5553 and part number 4325320 from OSHKOSH DEFENSE LLC, issued under solicitation SPE7L1-26-T-856M. The item must be delivered in a single unit within 121 days to the designated location in Albany, Georgia, under FOB origin terms, with no tolerance for quantity variance. All packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container specifications, while marking must adhere to MIL-STD-129 with no special marking codes required. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date based on acquisition size. Delivery must be directed to the DLA Distribution Management Office in Albany, Georgia, and the required delivery date is July 20, 2026, with a submission deadline for responses on August 3, 2026. The contract falls under NAICS code 333613 and is managed by the Department of Defense’s Land Supply Chain organization, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
BALL JOINTThe contract is for the procurement of a ball joint with NSN 3040-01-600-1867 and part number 2998K321 from McMaster-Carr Supply Co, under solicitation SPE7LX-26-U-8915, with a total quantity of 16 units at a unit price of $16.00, resulting in a total price of $256.00. The requirement is designated as a Total Small Business Set-Aside under NAICS code 333613, and delivery must be made within 49 days FOB origin with no tolerance for quantity variance. All items must be packaged and marked in strict compliance with MIL-STD-129 and ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence over any material standard. Inspection and acceptance occur at the destination point, and packaging must follow DLA’s Packaging Requirements for Procurement (RP001), including palletization standards. The U/I is EA and the QUP is specified as 001, meaning each unit pack contains one item. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. Primary point of contact is Theodore Misiolek, reachable via phone or email. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation issue date for simplified acquisitions. The item is covered under DLA Direct, CONUS, and the contract explicitly states that the estimated quantity may not be fully purchased by the IDC. All documentation and labeling must conform to the referenced standards and DLA directives without exception.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
BRAKE, BASEThis contract is for the procurement of 21 units of BRAKE, BASE with NSN 3040-01-165-4444 under solicitation SPE7LX-26-U-8900, a total small business set-aside classified under NAICS code 333613. The delivery is due within 99 days after contract award, with responses due by August 5, 2026. The specification incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions controlled by the solicitation issue date for simplified acquisitions. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The product must not contain any Class I ozone-depleting chemicals, and any substitutions require prior approval unless explicitly authorized by the specification. Inspection and acceptance are to occur at origin, and configuration changes must be managed through an Engineering Change Proposal with formal request for variance if deviations are necessary. Technical data associated with this item is subject to export controls under ITAR or EAR, with restrictions on disclosure to foreign persons both domestically and abroad, requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed required DLA training and questionnaires. The contracting office is the Strategic Acquisition Program Directorate within the Department of Defense, with Theodore Misiolek as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGIDThis solicitation, SPE7L1-26-T-859R, is a Women-Owned Small Business Set-Aside for 168 rigid connecting links with a delivery requirement of 505 days after award, under purchase request 7017440434. Offerors must comply with stringent domestic sourcing rules, including the Berry Amendment, Buy American Act, and applicable DFARS clauses, with a lowered Berry threshold of $150,000, requiring full disclosure of any non-domestic materials used. The use of additive manufactured parts is prohibited unless explicitly approved by the contracting officer, and any such proposal will be deemed ineligible for award. Offerors are strongly encouraged to provide quantity ranges in their quotes due to the unpredictable and fluctuating nature of procurement needs, as fixed quantities may lead to administrative inefficiencies unless under Auto IDC. A “No Bid” submission is required on DIBBS for those planning to quote after the closing date to avoid assumption of non-procurability. All offerors must represent that they will not supply covered telecommunications equipment or services prohibited under FAR 52.204-24 or DFARS 252.204-7016. Small business joint ventures must submit required certifications for eligibility under applicable set-aside categories. Contractors must register through DLA’s new Account Management & Provisioning System (AMPS) within two months to gain access to the Vendor Shipment Module, and those using VSM WebServices must implement schema updates by April 23, 2025, or lose shipping capability. Fast Pay is not applicable, and all submissions must be made via DIBBS with full compliance to the specified clauses and representations.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
RING, ROD, PISTONThe contract pertains to the procurement of 11 units of RING, ROD, PISTON with NSN 3040-01-348-1517 under solicitation SPE4A5-26-T-300M, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 171 days of award, with responses due by July 29, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment specifies a later revision. Packaging must comply with DLA procurement standards, and government identification must be removed from non-accepted supplies. Physical identification of bare items is required, though Item Unique Identification is not mandated per the Service customer's request. Export control provisions apply to technical data associated with this item, which is subject to ITAR or EAR regulations; disclosure to foreign persons, including foreign nationals within the U.S., is restricted and requires prior authorization. Access to this controlled data is limited to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and been approved by DLA. The place of performance is Tinker AFB, Oklahoma, and inquiries may be directed to Rasulbek Kilichev at the provided contact information.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
GEAR RACKThe contract pertains to the procurement of a single gear rack, part number 895-28365, manufactured by Moog Inc. for use in a hydraulic rotary actuator model FS-895, identified by NSN 3020-01-159-2738. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with any applicable R or I numbers governing specifications. The supplier must adhere to DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking needed. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components such as batteries, instruments, or weapon systems, and any permitted mercury-containing devices must meet Navy specifications for containment and shock protection. The supply must be shipped within 20 days of contract award, delivered FOB origin, with no tolerance for quantity variance, and inspected and accepted at the destination. Freight must be sent by the fastest traceable means, not parcel post, to the designated receiving facility at Silverdale, Washington, with all packaging palletized according to DLA requirements. Cybersecurity maturity model certification Level 2 self-assessment is required, and the contract mandates removal of government identification from non-accepted supplies. The required delivery date is July 17, 2026, with a solicitation response deadline of August 3, 2026.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHTThe contract specifies the procurement of one straight shaft, identified by NSN 3040-01-551-7822 and part number TYUW33008B, under solicitation SPE7L4-26-T-5734, with a required delivery within 20 days of contract award. The item must be delivered FOB destination, with no tolerance for quantity variance, and is subject to inspection and acceptance at the delivery point. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit containerization, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and shipment must be made via traceable transport methods, explicitly prohibiting parcel post. The destination is the USS JOHN PAUL JONES DDG 53 at FPO AP 96669, with shipment reference RDD 777 and supplier identifier YNCG03. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers, with revision control tied to the solicitation or award date depending on acquisition size. The contract enforces strict compliance with DoD unit of issue standards and mandates use of the DLA Vendor Shipping Module for logistics coordination. The original delivery deadline is July 16, 2026, and the point of contact is Anna-Rachelle Betts at DLA, with additional Federal use codes and administrative data applicable for internal tracking.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
RACK, PISTON, ACTUATOThe contract pertains to the procurement of a rack, piston actuator identified by NSN 3040-01-117-4775 and manufacturer part numbers 28916 and 895-28365 from MOOG INC. Only one unit is required, with a strict delivery requirement of 20 days from contract award, FOB origin, and no variance allowed in quantity. The item is classified as a critical application, subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which must be adhered to as of the solicitation or award date depending on acquisition size. The use of mercury or mercury-containing compounds is strictly prohibited unless explicitly exempted for functional components such as batteries, fluorescent lighting, sensors, or weapon systems, and even then, portable mercury-containing devices must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with specific preservation, marking, and palletization standards, and the item must be shipped via the fastest traceable means—parcel post is explicitly prohibited. Delivery is to be made to the receiving officer at Building 7000, Door 12, Silverdale, WA, with a required delivery date of July 17, 2026. The contract is issued under solicitation SPE7M4-26-T-271X, with a response deadline of August 3, 2026, and is administered by the Department of Defense’s Fluid Handling Division, with Blake Tushar as the point of contact.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 339991
New
DIBBS
GASKET, SPIRAL WOUNDThe contract is for the procurement of 20 units of a metallic/flexible graphite spiral wound gasket with part number M16265, rated for 0.750 NPS and 600 PSI, designated by NSN 5330-01-438-5299. The item must conform to current or previously valid revisions of the established part standard, with all units manufactured after the solicitation date required to meet the latest revision. Strict quality and packaging controls are enforced, including compliance with MIL-DTL-117, Type II, Class C, Style 1 for packaging, mandating a medium-duty, waterproof, greaseproof, and opaque sealed bag for all deliveries, including direct vendor delivery, foreign military sales, and stock shipments. This item is manually excluded from the First Destination Packaging program and is not eligible for standard commercial packaging. The contract prohibits the intentional addition of mercury or mercury-containing compounds, with limited exceptions for designated functional uses such as batteries, instruments, or weapon systems, and requires any portable fluorescent lamps or instruments containing mercury to be shockproof with a secondary containment barrier as per NAVSEA 5100-003D. Sampling and verification adhere to MIL-STD-1916 or ASQ H1331, Table 1, or a comparable zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sampled lots unless otherwise specified. The contract incorporates technical and quality requirements from the DLA Master List, and all suppliers must ensure the item is free of asbestos, with any alternatives requiring formal approval under Clause L30 and Provision 4 conditions. The solicitation number is SPE7L3-26-T-124V, issued on July 21, 2026, with responses due by August 3, 2026, and delivery due within 154 days after delivery order. The contracting activity falls under the Department of Defense, specifically Land Supplier Operations Vehicle Support, with a place of performance in Tracy, CA, and primary point of contact Susan Diamond.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333618
New
DIBBS
FILTER ELEMENT, INTAKEThis contract is for the procurement of 470 units of a filter element for an intake air cleaner, identified by NSN 2940-01-614-7614 and part numbers DC-VG-1 and 91930899, under solicitation SPE7L3-26-U-0642. The item is classified as a critical application item and is subject to technical and quality requirements referenced from the DLA Master List, which governs specifications based on the solicitation issue date. Delivery must occur within 41 days FOB origin with no variance allowed in quantity, and inspection and acceptance are required at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. The contract is structured as a DLA Direct, CONUS procurement, with a unit price of $470 per unit, resulting in a total estimated value of $220,900, though the quantity is non-binding and may not be fully purchased. The solicitation is a total small business set-aside under NAICS code 333618, with responses due by August 5, 2026, and is managed by the Department of Defense’s Land Supplier Operations Vehicle Support office, with Aaron Moore as the primary point of contact.
Other Engine Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
GASKETThis contract is for the procurement of one gasket with NSN 5330-00-164-3580 under solicitation SPE7L3-26-T-124N, issued by the Department of Defense through the Land Supplier Operations Vehicle Support office. The item must be delivered within 20 days of order to Fort Campbell, Kentucky, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination. The gasket must comply with MIL-STD-130N for identification marking and is exempt from asbestos as defined in FED-STD-313. Packaging must adhere to MIL-STD-2073-1E with specific methods including medium-duty, waterproof, greaseproof, opaque packaging per MIL-DTL-117, Type II, Class C, Style 1, and marking in accordance with MIL-STD-129. No special marking is required. The item is to be palletized following DLA packaging requirements and shipped using traceable freight methods, not parcel post, with the shipment directed to Fort Campbell, KY. The contract references DLA’s Master List of Technical and Quality Requirements for all technical and quality specifications, with revisions controlled by the solicitation issue date. The supplier must ensure all components meet the listed approved part numbers from manufacturers including Taylor Machine Works, Eaton Corporation, Dana Automotive Systems, Linear Motion LLC, General Motors, Mitsubishi Caterpillar Forklift, and Linde Material Handling. The point of contact is Susan Diamond, and the response deadline is August 3, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333612
New
DIBBS
GEAR SECTOR, SPURThis contract pertains to the procurement of a single gear sector, spur with NSN 3020-01-611-7082 and part number MTM-10503, issued by the Defense Logistics Agency under solicitation SPE7L3-26-T-124S. The requirement is for one unit to be delivered within ten days of contract award, with delivery terms set at FOB origin and no variance allowed in quantity. All packaging must comply with ASTM D3951 and MIL-STD-129, and palletization must adhere to DLA’s specific packaging directives, with the DLA Master List of Technical and Quality Requirements taking full precedence over any referenced standards. The item is to be shipped by the fastest traceable means, excluding parcel post, to a U.S. Army facility in Drawsko Pomorskie, Poland, under shipment RDD 555, with the marking and freight address clearly identified. The supply is classified under NAICS code 333612 and is subject to government-only use designations including IPD 05 and DIC A0A. The required delivery date is July 14, 2026, and the solicitation was posted on July 21, 2026, with responses due by August 3, 2026. Technical and quality requirements are incorporated reference-only via the DLA Master List, accessible online, with control determined by the solicitation or award date depending on acquisition size. The point of contact for inquiries is Lee Miller, and the contract is administered under the Department of Defense’s Land Supplier Operations Vehicle Support division. The unit of issue is each, and the total contract value is $1.00.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
LATCH, DOOR, VEHICULAR
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 313320
New
DIBBS
PACKING WITH RETAINER
Fabric Coating Mills

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336411
New
DIBBS
GASKETThe contract pertains to the procurement of a gasket with part number 53100387-1 and NSN 5330-01-316-2470, with a quantity of nine units to be delivered within 168 days of award. The item is subject to stringent material restrictions, including a complete prohibition of asbestos as defined by Fed-Std-313 and a ban on the intentional addition of mercury or mercury-containing compounds in direct contact with the hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment barrier to prevent leakage, in compliance with NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The solicitation number is SPE7L3-26-T-106F, issued on July 9, 2026, with responses due by July 20, 2026, under NAICS code 336411 for motor vehicle parts manufacturing. The contracting activity is the Department of Defense, specifically the Land Supplier Operations Vehicle Support, with performance required at Tracy, California, and primary point of contact Susan Diamond via email and phone provided.
Aircraft Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339991
New
DIBBS
PACKING WITH RETAIN
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336390
New
DIBBS
COMPUTER, SPECIAL PUThe contract pertains to the procurement of one unit of a Computer, Special PU with the NSN 2541-01-694-4944 under solicitation SPE7L3-26-T-124P, issued by the Department of Defense through the Land Supplier Ops Vehicle Spt organization. Delivery is mandated within five days of award and the place of performance is Fort Hood, Texas. The technical and quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, requiring a medium-duty, waterproof, greaseproof, and opaque bag to protect the item from UV deterioration, and this requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The item is explicitly excluded from the First Destination Packaging Program and is not eligible for standard commercial packaging. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutions must be approved unless already authorized by the specifications. Items supplied must be completely free of asbestos, and any alternative materials must receive formal approval in accordance with Clause L30 and Provision 4 conditions. Point of contact for inquiries is Kayla Buchanan, with the solicitation open until August 3, 2026.
Other Motor Vehicle Parts Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
TWISTLOCK, RETRACTABThe contract pertains to the procurement of a TWISTLOCK, RETRACTAB item with NSN 2590-01-491-1897 and part number 9HA827, issued under solicitation SPE7L3-26-U-0638 by the Department of Defense through the Land Supplier Operations Vehicle Support organization. A total quantity of 39 units is requested at a unit price of $39.00, totaling $1,521.00, with delivery required within 85 days FOB origin. The item is subject to strict compliance with DLA’s Master List of Technical and Quality Requirements, which take precedence over any other standards such as ASTM D3951, and must be packaged per MIL-STD-129 and RP001 packaging guidelines. Ozone-depleting chemicals are strictly prohibited in manufacture or incorporation, and any substitute materials require prior approval. The item may require casting or forging with specialized tooling not held by the government, and vendors are directed to submit a Casting and Forging Assistance Request if needed. Inspection and acceptance occur at the destination, with no variance permitted in quantity delivered. Packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, with palletization aligned to DLA standards. The contract is a DLA Direct, CONUS procurement, and all technical, quality, and packaging requirements are binding and non-negotiable.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details