Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONNECTING LINK, RIG

Active
SPE4A6-26-T-11WGFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a single Connecting Link, Rig, identified by NSN 3040-01-241-7449 and part number 70219-42410-045, procured under solicitation SPE4A6-26-T-11WG for the Department of Defense through the ASC Commodities Division. Delivery is required within 171 days from the award date, with a required ship date of January 31, 2027, and a final delivery deadline of July 26, 2027, at FOB Origin. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. No quantity variance is permitted, and the unit of issue is a single unit. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization strictly following DLA Packaging Requirements for Procurement, and all technical and quality requirements from the DLA Master List take precedence. Item Unique Identification is not required per the Service customer’s request, though other marking and labeling standards including physical identification and removal of government identification from non-accepted supplies must be followed. Technical and quality compliance is governed by multiple DLA Master List requirements including RQ001 for tailored higher-level quality requirements, RQ042 mandating ISO 9001:2015 for both manufacturers and non-manufacturers, RT001 for measuring and test equipment, and RD004 requiring a Cybersecurity Maturity Model Certification Level 2 self-assessment. Acceptable sampling follows Sikorsky Corporation’s alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. Covered defense information requirements apply, and all documentation must align with source approval procedures. The contract references DLA’s authorized unit of issue and requires adherence to cybersecurity and packaging protocols, with point of contact Tammy Ballard listed for inquiries. The solicitation opens with a response deadline of August 12, 2026, and includes comprehensive compliance obligations beyond standard procurement practices.

General Info

Single Connecting Link procured for DoD, delivery due by July 26, 2027, to New Cumberland, PA, with strict DLA packaging and cybersecurity compliance.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11WG.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Tammy Ballard
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTING LINK,RIG
CONNECTING LINK,RIG
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
SIKORSKY CORPORATION, CAGE 78286 ALTERNATE SAMPLING PLAN QAP 1201
PROCEDURE, "ATTRIBUTE SINGLE STATISTICAL ACCEPTANCE SAMPLING" IS
ACCEPTABLE. SIKORSKY CORPORATION'S ALTERNATE PLAN MUST MEET OR EXCEED
THE REQUIREMENTS OF ASQ H1331 OR MIL-STD-1916.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
SIKORSKY AIRCRAFT CORPORATION 78286 P/N 70219-42410-045
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-11WG
SECTION B
PR: 7017742782 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017742782 0001 EA 1.000
NSN/MATERIAL:3040012417449
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/31/2027 Original Required Delivery Date:07/26/2027
SPE4A6-26-T-11WG NSN/Part Number: 3040-01-241-7449 Quantity: 1 EA Purchase Request: 7017742782QTY: 1 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
CAM, CONTROL
Solicitation # SPE7L1-26-T-913C
This contract issued by the Department of Defense through the Land Supply Chain under solicitation SPE7L1-26-T-913C seeks one unit of NSN 3040-01-628-1622, identified as W S DARLEY & CO P/N X8102, under the CAM,CONTROL designation. The item must be delivered within five days of award, FOB origin, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and codes, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and the shipment is designated as RDD 999/NMCS with transportation governed by DLAD PROC NOTE C19 and C20. The delivery destination is the Reparable Issue Point at Camp Kinser, with distribution managed through M20220. The required delivery date is August 3, 2026, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, applicable based on acquisition size and amendment dates. The unit of issue is each (EA), and the contract is classified under NAICS code 333613 with no set-aside designation. Primary point of contact is Kristina Derry, reachable at the provided phone and email.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, ACTU
Solicitation # SPE7L1-26-T-912N
The contract pertains to the procurement of one cylinder assembly, actuating, linear, identified by NSN 3040-01-651-0388 and part number AVP-0.75X2.25-R, with a quantity of one unit. Delivery is required within ten days from the contract award, with delivery terms set at FOB origin and no quantity variance permitted. Inspection and acceptance both occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including specific packaging methods, materials, and container specifications. Marking must adhere to MIL-STD-129 with no special marking required. The item is subject to DLA's Packaging Requirements for Procurement and palletization standards, with shipments directed to the Distribution Management Office at Camp Kinser, Japan. Transportation and freight details reference specific DLA procedural notes, and the item is marked for delivery to MWSS 172. The solicitation number is SPE7L1-26-T-912N, with a response deadline of August 17, 2026, and the original required delivery date is July 31, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced under R and I numbering, with the applicable revision tied to the solicitation or award date depending on acquisition size. The contracting agency is the Department of Defense under the Land Supply Chain, and the point of contact is Kristina Derry.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGID
Solicitation # SPE7L1-26-T-914N
This contract pertains to the procurement of a single rigid connecting link, identified by NSN 3040-01-691-5927 and part number 072249 from L3 Technologies, Inc., with a required delivery within five days of award, delivered FOB destination. The item is classified as a critical application item and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, incorporating specifications identified by R or I numbers. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific packaging methods including preservative treatment, intermediate containment labeled E5, and a packing code of U, while avoiding any use of mercury or mercury-containing compounds except under limited, approved exemptions such as functionally necessary components in batteries, sensors, or weapon systems, which themselves require secondary containment and shock-proof construction per NAVSEA 5100-003D. All supplies must be marked according to government specifications with no additional special markings, and palletization must follow DLA packaging guidelines. The delivery destination is FPO AP 96349, with the final delivery location at the Commander, SRF-JRMC Yokosuka Naval Base in Japan. The contract requires exact quantity compliance with zero variance tolerance and includes specific transportation and freight shipping instructions referenced in DLAD procedural notes. The required delivery date is August 4, 2026, and all compliance, marking, and packaging directives are mandatory for acceptance at destination, where inspection and acceptance will occur.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIG
Solicitation # SPE4A5-26-T-328D
This contract is for the supply of 56 connecting links, rig, identified by NSN 3040-01-432-8239, under solicitation SPE4A5-26-T-328D, with a delivery requirement of 604 days after award. The contractor must provide detailed certification or accreditation information for the current dealer or distributor and confirm no Fast Pay terms apply. First Article Testing is mandatory for Lot Item 3040/14328239; the contractor must test one unit and submit a formal test report within 90 calendar days of contract award, with advance notice of at least 14 days prior to shipment for Government inspection. The Contracting Officer will issue written approval, conditional approval, or disapproval within 30 days of receiving the report, as outlined in Procurement Note H03. Production Lot Testing follows First Article approval, requiring the contractor to provide 14 days’ notice before the Government selects a random sample from the production lot for destructive testing. The samples must be shipped to Redstone Technical Test Center at Redstone Arsenal, Alabama, clearly marked as production lot samples and accompanied by all required documentation including signed DD Forms 1222 and 250/IRAPT, test reports, material certifications, process sheets, manufacturing drawings with proprietary markings, and a prepaid return shipping label. The contractor must price CLINs to cover all costs associated with consumed or destroyed test samples. Testing by the Government may take up to 180 days total, and the contractor is responsible for ensuring all submittals comply with MIL STD 129 and supplemental requirements in Procurement Note E04. The contract is issued by the Department of Defense, Office of ASC Supplier Operations OEM Division, with Jalon Lynch as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, A
Solicitation # SPE7L1-26-T-912H
The contract is for one cylinder assembly, identified by NSN 3040-01-682-5121 and part numbers 291050 and SEA1770-10203.02, supplied by YAMBA WELDING & ENGINEERING PTY and LEIDOS AUSTRALIA PTY LIMITED, respectively. It is classified as a commercial item and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with marking following MIL-STD-129 and no special marking codes applied. The item must be delivered FOB origin within 20 days of contract award, with inspection and acceptance occurring at the destination. The delivery address is the 2nd Assault Amphibian Battalion at Camp Lejeune, North Carolina, and shipping must be via the fastest traceable means—parcel post is prohibited. The contract is under solicitation SPE7L1-26-T-912H with a required delivery date of July 31, 2026, and the unit of issue is a single unit (EA). For government use only, the supply chain data includes a TCN, project code TP 2, and specific distribution and fulfillment codes.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, ACTU
Solicitation # SPE7LX-26-U-9235
The contract is for the procurement of 60 units of a linear actuating cylinder assembly identified by NSN 3040-01-572-7391 under solicitation SPE7LX-26-U-9235, issued by the Defense Logistics Agency’s Strategic Acquisitions Program Directorate. The requirement is a total small business set-aside under NAICS code 333613, with a 598-day delivery timeline and a response deadline of August 19, 2026. The item is subject to stringent technical and quality controls, including mandatory compliance with DLA’s Master List of Technical and Quality Requirements, export control regulations under ITAR or EAR, and restrictions on the use of ozone-depleting chemicals. Technical data associated with this item is classified as export-controlled and may only be accessed by contractors with approved U.S./Canada Joint Certification Program credentials, completion of DLA-specific training, and formal authorization. Configuration changes require formal engineering change proposals, and components must be sourced from qualified products or manufacturers listed per procurement note H02. Additionally, all supplies must adhere to DLA packaging standards, and government identification must be removed from non-accepted items. Cybersecurity requirements include CMMC Level 2 certification for any third-party assessors involved.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7L4-26-T-5980
The contract pertains to the procurement of a single unit of a pulley with a groove, identified by NSN 3020-01-338-4624 and part number SC-108, under solicitation SPE7L4-26-T-5980. Delivery is required within 20 days from the award date, with FOB origin terms, and the item must be delivered to Fort Eustis, Virginia, identified by the shipping address W26RK4, Building 1610, Patch Rd, AWCF SSF. The quantity variance is strictly zero percent, meaning exactly one unit must be supplied. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while adhering to MIL-STD-129 for marking and labeling. DLA’s Master List of Technical and Quality Requirements supersede any conflicting standards, and palletization must meet the specific packaging guidelines outlined in RP001. Shipments must use traceable methods only, excluding parcel post, and are tied to a government tracking number and project code TP 3. The contract specifies the unit of issue as each and the total price for one unit. The required delivery date is July 24, 2026, and the purchase request number is 7017643799. The point of contact is Anna-Rachelle Betts, and inquiries should be directed to her at the provided email and phone. The solicitation was issued on August 4, 2026, with responses due by August 17, 2026, under NAICS code 333613 for the Department of Defense's Combat Vehicles and Armament division. All technical and quality requirements referenced through R or I numbers in the DLA Master List govern the product’s conformance, and the Government maintains administrative controls for tracking and disposition using the designated DIC, DIST, and ADV codes. The vendor, Columbus Jack Corporation, is expected to fulfill all specifications, packaging, and delivery obligations to avoid rejection or non-compliance.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
GEAR, WORM WHEEL
Solicitation # SPE7L4-26-T-5982
The contract is for one worm wheel gear, identified by NSN 3020-01-087-5122 and part number 27021-1280, under solicitation SPE7L4-26-T-5982, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. The item must comply with technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must follow MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking code, and the gear must be packaged in a Type 1, 2, or 3, Class B or C, Style 1 bag per MIL-B-117. Delivery is required within 20 days FOB origin with zero variance in quantity, inspected and accepted at destination. The item must be shipped via the fastest traceable means, explicitly excluding parcel post, to the receiving address in Silverdale, Washington, with a required delivery date of July 28, 2026. All shipments must adhere to specified palletization and container instructions, and the point of contact for inquiries is Anna-Rachelle Betts. The contract includes government-only identifiers and project codes for tracking and administrative purposes.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L1-26-T-911G
The contract specifies the procurement of one straight shaft with NSN 3040-01-521-9922 and part number LG0094-533 from SAF-HOLLAND, INC. The item is to be delivered within five days of contract award, with delivery terms set at FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and all packaging must comply with ASTM D3951 unless superseded by higher-priority DLA Master List of Technical and Quality Requirements. Packaging and labeling must adhere to MIL-STD-129, and palletization must meet DLA’s RP001 packaging standards. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated delivery point at Building 3416, 8 Liberty Street, Devens, MA 01434-4320. The required delivery date is August 5, 2026, and the contract is issued under solicitation SPE7L1-26-T-911G with a response deadline of August 17, 2026. The item falls under NAICS code 333613 and is managed by the Department of Defense’s Land Supply Chain. All government identification must be removed from non-accepted supplies, and the contract includes specific tracking identifiers including RDD 999, project TP 1, and supplier code W90NHW.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
PROPELLER SHAFT WIT
Solicitation # SPE7L1-26-T-913J
This contract specifies the procurement of a single unit of a propeller shaft with a U-joint cataloged under NSN 2520-20-007-7387, sourced from approved manufacturers including EUGEN KLEIN GMBH, ELBE HOLDING GMBH CO. KG, and GENERAL DYNAMICS LAND SYSTEMS CANADA. The item must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications including ASTM D3951. Ozone depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the governing specifications. Packaging and shipping must adhere to DLA’s RP001 packaging requirements and MIL-STD-129 labeling standards, with hazardous material packaging following IP025 if applicable per FED-STD-313. The item must be delivered FOB origin within five days of contract award, shipped via traceable freight methods excluding parcel post, and addressed to the designated delivery point at Fort Carson, Colorado. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The contract reference number is SPE7L1-26-T-913J, with a required delivery date of August 3, 2026, and the unit of issue is each. All contractual obligations are binding under DLA procurement rules, and the point of contact for inquiries is Kristina Derry.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
GEARSHAFT, SPUR
Solicitation # SPE7L1-26-T-913A
The contract pertains to the procurement of one spur gearshaft, identified by NSN 3040-21-914-9942 and part number 22400, supplied by PULLMASTER WINCH CORPORATION DBA 38335. The item must be delivered within five days of contract award, shipped FOB origin, with strict quantity compliance—no variance allowed—and inspected and accepted at the destination. Packaging requirements mandate compliance with ASTM D3951, but are superseded by DLA’s Master List of Technical and Quality Requirements, which take precedence; all packaging and labeling must adhere to MIL-STD-129 with unit packaging as specified. Palletization must conform to DLA Packaging Requirements for Procurement. The delivery destination is BLDG 4925, SANTA FE AVE, FORT HOOD TX 76544, with shipment required via traceable means excluding parcel post, and marked for RDD/ NMCS shipment. The use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification provisions, and any substitute chemicals require prior approval unless explicitly authorized. The gearshaft has no shelf life requirement. The contract number is SPE7L1-26-T-913A, with a required delivery date of August 5, 2026, and the solicitation was posted on August 4, 2026, with responses due by August 17, 2026. The unit of issue is each (EA), priced at one dollar, and the purchase request number is 7017727186. Government use codes and shipping identifiers are included for internal tracking, and primary point of contact is Kristina Derry of the Department of Defense.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
Mechanical Actuator Supply (Non-Aircraft)
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332312
New
DIBBS
Supply of Fasteners (NSN 5307-01-212-4400)The contract pertains to the manufacture or supply of standardized fasteners identified by NSN 5307-01-212-4400, specifically for integration into defense systems. As a commercial item procurement, it mandates strict adherence to military specifications and federal supply chain standards to ensure compatibility, reliability, and interoperability within military equipment. The item falls under NAICS code 332312, classifying it as a manufacturing activity related to screw, bolt, and fastener production, and is being procured under a subcontract mechanism by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, providing vendors with a two-week window to submit proposals. While no specific place of performance or point of contact is detailed, the procurement is governed by the Defense Logistics Agency’s procurement framework, as indicated by the official DIBBS portal link. All suppliers must meet the defense sector’s quality, documentation, and delivery requirements without any set-aside provisions for small or disadvantaged businesses, emphasizing a competitive, open-market approach aligned with DoD supply chain objectives.
Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Assessment Support
Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation Management
Administrative Management and General Management Consulting Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Production Lot Testing (PLT) Services
Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-11RF
This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING SE
Solicitation # SPE4A6-26-T-11ZR
The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12FD
The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details