Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONNECTOR BODY, RECE

Active
SPE7M5-26-T-367PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a connector body receptacle with part number 5935-00-892-3059, requiring one unit to be delivered within 20 days to the destination FPO AE 09578 aboard the USS McFaul DDG74. The item is classified as a critical application and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The use of ozone-depleting substances is strictly prohibited in all manufacturing and processing stages unless explicit written approval from the contracting officer is obtained, and mercury or mercury-containing compounds are banned from direct contact with the hardware except in limited, specially defined cases such as functional mercury in batteries or fluorescent lights, which must include a secondary containment boundary. Compliance with MIL-STD-1916 or equivalent zero-based sampling plans is required for inspection, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or corresponding AQLs, and acceptance must result in zero non-conformances unless otherwise stated. Packaging, marking, and preservation must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-55330, with special marking code 00-00 indicating no additional requirements. The delivery is FOB destination with no quantity variance permitted, and inspection and acceptance occur upon receipt at the destination. The contract also mandates adherence to Department of Defense transportation protocols, including specific procedures for vessel and DLA vendor shipments, and includes designated government-use fields for tracking and logistics compliance.

General Info

One connector body receptacle due in 20 days to USS McFaul, FPO AE 09578, with strict quality and environmental compliance.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

UNIT 100311 BOX 1, FPO, AE, 09578, US

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-367P.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Margaret Smith
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTOR BODY,RECE
CONNECTOR BODY<(>,<)> RECEPTACLE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
SPE7M5-26-T-367P
SECTION B
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
COOPER INTERCONNECT, INC. 99447 P/N 000400-0027
KEYSTONE GENERAL INC 64147 P/N SM-D-414144
IAW REFERENCE
REVISION NR DTD
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017673570 0001 EA 1.000
NSN/MATERIAL:5935008923059
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PRESERVATION AND PACKAGING SHALL BE IAW THE
LATEST REVISION OF MILITARY SPECIFICATION:
MIL-DTL-55330, FOR CONNECTORS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
V21948
USS MCFAUL DDG74
SPE7M5-26-T-367P
SECTION B
PR: 7017673570 PRLI: 0001 CONT’D
UNIT 100311 BOX 1
FPO AE 09578
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V21948
USS MCFAUL DDG74
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
M/F: (TCN) V219486169CE53
RDD: 777
PROJ: 9AL TP 2
SUPP ADD: YNCSE1 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 04
DIC: A41 DIST: 9B ADV: FC: SR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/28/2026
SPE7M5-26-T-367P NSN/Part Number: 5935-00-892-3059 Quantity: 1 EA Purchase Request: 7017673570QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
COVER, ELECTRICAL CO
Solicitation # SPE7M5-26-T-367F
The contract specifies the procurement of three electrical cover units with NSN 5935-01-534-4832 and part number 660-012NF15U6-106, under solicitation SPE7M5-26-T-367F, with a required delivery within 20 days of award. The item is to be delivered FOB destination, with no tolerance for quantity variance, and inspected and accepted at the delivery point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. If the item is not classified as hazardous per FED-STD-313, it must be commercially packaged per SPE7M5-26-T-367F and palletized per RP001 requirements. Government identification must be removed from non-accepted supplies, and all items must be physically identified per RQ017. Delivery is directed to MALS-12 at MCAS Iwakuni, Japan, with a secondary parcel post address at FPO AP 96310-7161. Transportation logistics follow DLAD Proc Note C19 for vessel shipment and C20 for first destination transport. The original required delivery date is July 30, 2026, and the contract is issued under a federal solicitation managed by the Department of Defense’s Active Devices Division with point of contact Margaret Smith.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M0-26-T-029H
The contract specifies the procurement of 40 units of a commercial off the shelf (COTS) electrical plug connector identified by part number HBL400MGN from HUBBELL INC WIRING DEVICE DIV and NSN 5935016743784, with a unit price of $40.00 and a total value of $1,600.00. Delivery is required within five days of order, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with DLA Master List requirements, MIL-STD-129 labeling, and either ASTM D3951 for non-hazardous items or TQ requirement IP025 if hazardous under FED-STD-313. Palletization must follow RP001 packaging guidelines. The item must be shipped by the fastest traceable means, excluding parcel post, to the designated receiving facility in Tobyhanna, Pennsylvania, with freight addressed to ASARS 1C BAY 6. The required delivery date is August 3, 2026, and the contract reference is SPE7M0-26-T-029H, governed by DLA technical and quality standards that supersede all other specifications. The point of contact is Gerard Quinn, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-R-XC26
This contract, issued under solicitation number SPE4A6-26-R-XC26 by the DLA Aviation ASC Commodities Division, is a Firm Fixed Price Indefinite Delivery Purchase Order for 28 units of the Cable Assembly, RADI RA001, identified by NSN 5995-01-657-9352 and part number 09-2830203-1 manufactured by General Dynamics Mission Systems, Inc. The item is designated as a Critical Application Item, requiring strict adherence to technical and quality standards defined in the DLA Master List of Technical and Quality Requirements, accessible online, with specific requirements identified by R or I numbers governing its design, manufacturing, and inspection. The contract mandates compliance with military packaging standards MIL-STD-2073-1E and marking standards MIL-STD-129, with no special marking required, and palletization must follow DLA Packaging Requirements for Procurement (RP001). Sampling for quality assurance must conform to MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes treated as major unless otherwise defined. Inspection and acceptance occur at destination, and the contractor must maintain an inspection system consistent with FAR 52.246-2. Delivery is required within 99 days after receipt of order under FOB Origin terms, with shipments destined for various CONUS stock locations identified per individual delivery order. The contract has a base period of five years (1825 days) with a guaranteed minimum quantity of seven units and a maximum order limit of 28 units, and the total estimated contract value is capped at $350,000. The contractor must comply with extensive regulatory clauses covering cybersecurity (CMMC Level 2 self-assessment), defense information protection (RD002), removal of government identifiers (RQ011), physical item marking (RQ017), export control, prohibition of hexavalent chromium and certain materials from Xinjiang, Buy American provisions, and whistleblower protections. Payment is electronic via WAWF, and the contractor is required to use U.S.-flag vessels for ocean transport unless prior written approval is obtained. Offer
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-Q-0830
The contract is for the procurement of three electrical plug connectors identified by NSN 5935-01-374-7034 and part number M83723/86W2028N, conforming to MIL-DTL-83723H Rev H and MIL-DTL-83723/86E Rev E specifications dated January and March 2024 respectively. This is a qualified item requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts, and all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements take precedence. The product is designated as a critical application item and must not contain any Class I ozone-depleting chemicals, with any substitute chemicals requiring prior approval. All items must be marked and labeled per MIL-STD-129, packaged in accordance with DLA packaging standards RP001, and shipped commercially per ASTM D3951 unless classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. Palletization must follow RP001 guidelines, and the unit of issue is each, with zero variance allowed in quantity. Delivery is required within 90 days after award, with FOB origin terms and inspection and acceptance occurring at destination. The shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania and the contract is managed by the Department of Defense’s Active Devices Division with Andrew Bracken as the primary point of contact. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, and the material is needed by March 19, 2027.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M0-26-T-028S
The contract is for the procurement of 600 electrical plug connectors, part number AP-176 manufactured by AMPHENOL CORPORATION, with NSN 5935-01-460-9394, to be delivered within five days to the Tobyhanna Army Depot in Pennsylvania. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting commercial standards such as ASTM D3951. Zero tolerance is enforced for quantity variance, and delivery is FOB origin with inspection and acceptance occurring at the destination. Packaging must adhere to MIL-STD-129 labeling and RP001 packaging guidelines, with hazardous materials packaged per FED-STD-313 and TQ requirement IP025, while non-hazardous items must meet commercial packaging standards consistent with DLA directives. Use of ozone-depleting substances is strictly prohibited unless prior written approval from the contracting officer is secured, and mercury or mercury compounds may not be intentionally introduced into the product except for specific functional exceptions like batteries or instruments, which must include secondary containment per NAVSEA 5100-003D. Shipment must be sent via the fastest traceable means, excluding parcel post, to the designated ASARS receiving facility. The contract is issued under solicitation SPE7M0-26-T-028S with a required delivery date of August 3, 2026 and requires compliance with the DoD unit of issue framework. All items must be permanently marked per RQ017 and bear no government identification if rejected. The point of contact for inquiries is Gerard Quinn of the Department of Defense.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-T-366T
The contract is for a single electrical plug connector, part number MS3116F22-21P, identified by NSN 5935008929324, which is classified as a qualified item under the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts. The item must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, including specific standards MIL-DTL-26482J and MS3116E, and is designated as a critical application item. The use of any Class I ozone-depleting substances in its design, manufacturing, or testing is strictly prohibited unless explicit written approval from the contracting officer is obtained, and this prohibition overrides all other specification requirements except performance criteria. Packaging must strictly follow DLA requirements, including MIL-STD-129 labeling and RP001 palletization guidelines, with commercial packaging per ASTM D3951 only acceptable if the item is not hazardous under FED-STD-313. The item must be delivered in one unit within 20 days FOB origin to Mayport Naval Station, Florida, with no quantity variance permitted, and inspected and accepted at the destination. Shipping must occur by traceable freight methods; parcel post is prohibited. The contract was issued under solicitation SPE7M5-26-T-366T, with a required delivery date of July 31, 2026, and is subject to full and open competition with no set-aside. All documentation and compliance obligations are binding and supersede general commercial practices unless specifically exempted for commercial items as defined in FAR 11.001.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
SHELL, ELECTRICAL CONNE
Solicitation # SPE7M0-26-T-031B
This contract pertains to the procurement of a single electrical connector shell, identified by NSN 5935-01-394-8224 and part number 463AS002NF2006F3, under solicitation SPE7M0-26-T-031B. The requirement is for one unit to be delivered within five days of award, with delivery terms set at FOB origin and no quantity variance permitted. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, wrapper material, and packaging levels. Marking adheres to MIL-STD-129 with no special markings required, and palletization follows DLA packaging standards. The item is destined for the Naval Supply Depot in Hagatna, Guam, under a RDD 999/NMCS shipment, with freight details governed by DLAD procedural notes C19 and C20. The contract incorporates all referenced technical and quality requirements listed in the DLA Master List, as applicable on the solicitation issue date. The contract was posted on August 4, 2026, with responses due by August 17, 2026, and falls under NAICS code 334417 for electrical connector manufacturing. It is managed by the Department of Defense’s Maritime Supply Chain ESO Buys office, with Gerard Quinn as the primary point of contact. The delivery must be completed by the original required delivery date of August 4, 2026, and the government retains full control over post-delivery logistics and usage. Federal compliance, including removal of government identification from non-accepted items and physical identification of bare items, is enforced throughout. The procurement is governed by DLA-specific administrative and logistical directives, and the unit of issue is a single unit, consistent with DoD standards. All contractual obligations, including shipping, marking, compliance, and documentation, are binding and must be executed in full alignment with DLA and DoD policies.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
TERMINAL BOX
Solicitation # SPE4A7-26-T-608P
The contract pertains to the procurement of four terminal boxes identified by NSN 5940000803932 and part number M24558/12-450, governed by technical specifications MIL-DTL-24558C Supplement 1 and MIL-DTL-24558/12B, with compliance required to DLA’s Master List of Technical and Quality Requirements. All items must meet stringent quality assurance standards, including sampling per MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances accepted unless otherwise specified; attributes are classified as critical, major, or minor with corresponding verification levels or AQLs. The product must be marked per MIL-STD-129 with no special marking codes, packaged per MIL-STD-2073-1E using preservative method 10, contained in E5 units, and palletized according to DLA packaging requirements. Delivery is FOB origin with a 171-day lead time, scheduled for completion by January 31, 2027, to a designated DLA distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. Quantity variance is zero percent, and the contract is managed under solicitation SPE4A7-26-T-608P with a response deadline in August 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M0-26-T-029X
The contract specifies the procurement of two connector receptacles with part number IT41030AFK28-20SB1N0F11 and NSN 5935-01-690-6762 under solicitation SPE7M0-26-T-029X, with a required delivery within five days of award. The unit price is $2.00 per unit, totaling $4.00, with no variance allowed in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. All packaging must comply with DLA Master List of Technical and Quality Requirements, which override ASTM D3951, and must conform to MIL-STD-129 labeling and RP001 packaging standards. If the item is classified as hazardous under FED-STD-313, it must be packaged per TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 applies. The items must be palletized according to DLA guidelines and shipped using the fastest traceable method—parcel post is prohibited. The delivery destination is ASRS Building 1 Bay 6, Tobyhanna PA, while the freight shipping and marking address is ASARS 1C Bay 6, Tobyhanna PA. The required delivery date is August 3, 2026, and the contract mandates strict adherence to government-specific identifiers, with no alterations to markings on non-accepted supplies. The primary point of contact is Gerard Quinn of the Department of Defense, and the solicitation response deadline is August 17, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M2-26-T-5986
This contract specifications pertain to a electrical plug connector designated by NSN 5935-01-260-5258 and part number D38999/26WD35PB, required in a quantity of 2,600 units to be delivered FOB origin within 161 days. The item must conform to MIL-DTL-38999N and MIL-DTL-38999/26G standards and is classified as a qualified product under the DLA Qualified Products List for connector assemblies and electrical contacts. Manufacturing sources are restricted: materials produced by Amphenol, Matrix, or Pyle National between July 2006 and June 2016 are prohibited, as are items from Bendix Corporation manufactured between January 1977 and February 1984. Traceability documentation may be requested to verify manufacturing dates and origins. The product is designated as a critical application item and must be free of mercury and its compounds except in approved applications such as batteries, laboratory instruments, and weapon systems, with additional containment requirements for portable devices containing mercury. Use of Class I ozone-depleting substances is strictly prohibited in any phase of production unless written approval is granted. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking required. Delivery is to the DLA Distribution Center in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The contract enforces zero variance in quantity and requires the unit of issue to be each. The solicitation was issued on August 4, 2026, with responses due by August 17, 2026, under contract number SPE7M2-26-T-5986.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M0-26-T-029U
This contract specifies the procurement of a connector receptacle identified by NSN 5935016735782 and part number D38999/20SD97SA, meeting the technical standards of MIL-DTL-38999/20H and MIL-DTL-38999N with revisions dated August 2022 and September 2023 respectively. The item is classified as qualified under the Qualified Products List for Federal Stock Class 5935 connector assemblies and electrical contacts, with compliance required per procurement note H01. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date based on acquisition size. Packaging must adhere to MIL-STD-2073-1E with specific methods for preservation, wrapping, and containerization, and all marking must follow MIL-STD-129 without special marking codes. The item is to be palletized per DLA packaging guidelines and shipped via the fastest traceable means, excluding parcel post. The contract calls for six units to be delivered FOB origin within five days of award, with no variance permitted in quantity. Inspection and acceptance occur at the destination, specifically at the ASARS 1C Bay 6 facility in Tobyhanna, Pennsylvania. The required delivery date is August 3, 2026, with the original need date left blank. The contract number is SPE7M0-26-T-029U with a unit price of $6.00 per unit totaling $36.00. The shipping and delivery addresses are both located at the Tobyhanna Army Depot, and the point of contact for inquiries is Gerard Quinn of the Maritime Supply Chain ESOc Buys office under the Department of Defense. The item is classified under NAICS code 334417 and is issued in units of one each (EA) as per DoD authorized unit of issue guidelines.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M0-26-T-029P
The contract pertains to the procurement of a 12V alternator plug connector, identified by part number 6304526-59 and NSN 5935-01-517-0246, with a single unit quantity requiring delivery within five days FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951 unless otherwise specified, and compliance with MIL-STD-129 for marking and packaging is mandatory. Sampling must adhere to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in the sample lot unless otherwise stipulated; attributes are classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes default to major. The use of ozone-depleting substances is strictly prohibited except with explicit written approval from the contracting officer, and mercury or mercury compounds may not be intentionally introduced, except in specified functional applications such as batteries, fluorescent lights, or naval instruments, with additional containment requirements for portable devices. Packaging must follow DLA-specific standards under RP001 and comply with Fed-Std-313 for hazardous materials, otherwise commercial packaging per ASTM D3951 is acceptable. The item must be shipped by the fastest traceable means, excluding parcel post, to the designated DLA distribution office in Jacksonville, Florida. Delivery is subject to exact quantity compliance with no variance permitted, inspection and acceptance occur at destination, and the supplier must obtain ESA approval if sourcing from an unapproved source. The contract number SPE7M0-26-T-029P and purchase request 7017726995 are referenced in all documentation, with the original required delivery date set for August 5, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE
Solicitation # SPE7M5-26-T-367E
This contract specifies the procurement of a fixed wire resistor with part number RER55F36R5R and NSN 5905-01-134-1187, meeting technical specifications MIL-PRF-39009/2C and MIL-PRF-39009E, both dated August 5, 2022. The item is classified as a critical application component, and all manufacturing, testing, and processing procedures are prohibited from using Class I ozone-depleting substances unless explicit written approval is obtained from the Contracting Officer. The resistor must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific lead finish labeling in accordance with IPC/JEDEC J-STD-609, which mandates clear identification of lead content on every unit package. Delivery is required within ten days of contract award, with FOB origin terms, zero quantity variance, and inspection and acceptance occurring at the destination. The sole quantity ordered is one unit, shipped via traceable freight methods excluding parcel post to the designated military address at Fort Benning, Georgia. All performance, material, and marking requirements are governed by referenced military specifications and DLA master lists, with no exceptions permitted unless formally approved.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334220
New
DIBBS
RADOME, POLARIZER
Solicitation # SPE7M5-26-Q-0829
The contract is for the procurement of 12 units of a RADOME, POLARIZER with NSN/Part Number 5985-01-157-5180 under solicitation SPE7M5-26-Q-0829, which is a total small business set-aside under NAICS code 334220. The offering is issued by the Department of Defense’s Active Devices Division, with a response deadline of August 19, 2026, and requires delivery within 463 days after order. The technical and quality requirements governing this acquisition are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Access to the controlled technical data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been approved by DLA. Configuration changes require formal engineering change proposals, and non-accepted supplies must have government identification removed. The contract also mandates CMMC Level 2 certification from third-party assessment organizations for cybersecurity compliance and incorporates DLA packaging standards for procurement.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M5-26-T-367K
The contract pertains to the procurement of twelve antennas under NSN 5985-99-671-2175, with a delivery requirement of 234 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision active on the RFP issue date unless amended. Alternate offerors must submit a complete data package including documentation for both the approved and alternate parts. The solicitation numbers SPE7M5-26-T-367K was posted on August 4, 2026, with responses due by August 17, 2026, under NAICS code 334220, and is managed by the Department of Defense’s Active Devices Division. The point of contact is Matthew Stanko, reachable at fmtewiq@dla.mil or 312-850-7245, and performance is to occur in New Cumberland, Pennsylvania, 17070-5002.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334220
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M5-26-T-367D
This contract is for the procurement of one cartridge fuse, identified by NSN 5920-01-368-3718 and commercial part numbers JJN-60 from Cooper Bussmann, LLC and 128311013 from Eaton Corporation, categorized as a commercial off-the-shelf item. The requirement is governed by DLA packaging standards under MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required and packaging configured for dry storage without cushioning or intermediate containers. Delivery is due within 20 days from the contract date, FOB origin, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be shipped to the designated military logistic site in Soto Cano, Honduras, and is subject to DLA transport protocols, including procurement notes C19 and C20 for freight handling. The procurement is issued under solicitation SPE7M5-26-T-367D, with a response deadline of August 17, 2026, and a required delivery date of July 30, 2026. Technical and quality requirements referenced via R and I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. The unit of issue is each, priced at $1.00, totaling $1.00 for the single unit. The point of contact is Matthew Stanko, and the solicitation is managed by the Department of Defense’s Active Devices Division. Government-use identifiers and logistical codes are embedded in the shipment data, and the item must comply with all hazardous materials transportation guidelines as outlined in DLA procedural notes, despite not being classified as hazardous.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334413
New
DIBBS
SEMICONDUCTOR DEVICE, T
Solicitation # SPE7M5-26-T-366Y
The contract specifies the procurement of a semiconductor device, specifically a thyristor, identified by NSN 5961-01-480-5281, with a quantity of two units. The item is classified as a commercial off the shelf product, and the procurement is governed by stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The supplier must comply with qualified suppliers and testing lists for Federal Supply Class 5961 and 5962, as defined in Procurement Note M01, and adhere to physical marking standards for bare items. Packaging must meet DLA-specific requirements, and the contractor is obligated to retain full supply chain traceability documentation as mandated by DLAD Procurement Note C03 from August 2016. Additionally, government identification must be removed from any non-accepted supplies. The solicitation is issued under SPE7M5-26-T-366Y, with a response deadline of August 17, 2026, and delivery is required within 20 days after award. The place of performance is Keyport, WA, and the contracting office is the Department of Defense's Active Devices Division, with Margaret Smith as the primary point of contact.
Semiconductor and Related Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
COVER, ELECTRICAL CO
Solicitation # SPE7M5-26-T-367G
This contract involves the procurement of a cover for an electrical connector with part number 660-012NF21U6-208 and NSN 5935-01-549-5224, for a quantity of four units at a unit price of four dollars, totaling sixteen dollars. Delivery is required within twenty days to the destination FPO AP 96310-7161 under FOB destination terms, with no tolerance for quantity variance. The item must comply with strict packaging and preservation standards as defined by MIL-STD-2073-1E and MIL-DTL-55330 for connectors, and marking must conform to MIL-STD-129 with no special marking code. All packaging and palletization must meet DLA’s procurement requirements, and the use of any Class I ozone-depleting substances in manufacturing, testing, or cleaning is strictly prohibited unless written approval is secured from the contracting officer—a restriction that overrides any conflicting specification but does not lessen performance obligations. The item is subject to inspection and acceptance at the delivery point, and transportation logistics follow specific DLA procedural notes C19 and C20. The solicitation number is SPE7M5-26-T-367G, issued by the Department of Defense’s Active Devices Division, with a response deadline of August 17, 2026, and an original required delivery date of July 30, 2026. Technical and quality requirements referenced under R or I numbers are governed by the DLA Master List, and the applicable revision depends on whether it is a simplified or large acquisition as defined by solicitation and award timelines.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 444180
New
DIBBS
CLAMP, CABLE, ELECTRI
Solicitation # SPE7M5-26-T-366W
The contract pertains to the procurement of two electrical cable clamps with part number 620FS003NF10 and NSN 5935-01-624-8720, supplied by Glenair, Inc. Delivery is required within 20 days to RAF Lakenheath, United Kingdom, under FOB origin terms with no tolerance for quantity variance. The items must comply with MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, without any special marking codes. Packaging must adhere to DLA packaging requirements, and the use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited unless explicit written approval is obtained from the contracting officer; this restriction does not apply to commercial items as defined by FAR 11.001. Inspection and acceptance occur at the destination, and the shipment must follow DLA transport procedures noted in C19 and C20 with aRDD identifier of 777. The contract references the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. The unit of issue is each, priced at $2.00 per unit, totaling $4.00 for the order. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Active Devices Division through Margaret Smith, with the primary point of contact provided.
Other Building Material Dealers

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, SEQUENCING
Solicitation # SPE7M5-26-T-367L
This contract solicitation, identified by SPE7M5-26-T-367L, is for 185 units of SWITCH, SEQUENCING with NSN 5930-00-246-9757, under a Women-Owned Small Business Set-Aside, and requires delivery within 93 days after order. Mandatory source inspection must occur at the manufacturer’s facility, and surplus materials are not acceptable. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item must conform to both the cited technical data and the specified part number, and vendor control drawings apply. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with supplied hardware, except in specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; portable lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract mandates CMMC Level 2 certification by a third-party assessment organization for cybersecurity compliance. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior governmental authorization for any disclosure to foreign persons, regardless of location. Only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and formal DLA authorization may access restricted technical data. The contract is managed by the Department of Defense’s Active Devices Division, with performance to be delivered to Jacksonville, Florida, and inquiries directed to Lea Dawn Robertson.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M5-26-T-366U
This contract pertains to the procurement of electrical contacts identified by NSN 5999-01-457-0915 and part number Molex LLC 1UX99 P/N 16-02-0117, with a quantity of 24 units to be delivered within 20 days under solicitation SPE7M5-26-T-366U. The items must be furnished in strict compliance with DLA packaging standards, including MIL-STD-2073-1E and MIL-STD-129 for marking, and must not contain mercury or mercury compounds unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, or weapons systems as defined by NAVSEA. Any exempted mercury-containing devices must include a secondary containment to prevent leakage and meet NAVSEA 5100-003D requirements. Packaging and shipping instructions specify that delivery must be FOB origin, inspected at destination, and shipped via the fastest traceable method without parcel post, with freight directed to the Naval Station Newport address and a separate parcel post address for administrative purposes. The contract enforces zero variance in quantity, requires adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and includes detailed packaging codes, containment methods, and special handling directives. The required delivery date is July 31, 2026, with the solicitation issued on August 4, 2026 and responses due by August 17, 2026, under a federal procurement framework governed by the Department of Defense and managed by the Active Devices Division.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details