This Solicitation opportunity from Department Of Defense was posted on May 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CONNECTOR, INHALANT

Closed

SPE2DS-26-T-063UFederal

Submission Closed05/18/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339113

New

DIBBS

NEEDLE, HYPODERMICThe contract pertains to the procurement of hypodermic needles identified by the National Stock Number 6515-01-562-0759, with a total quantity requested of four units. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, was posted on June 15, 2026, and has a response deadline of June 22, 2026. This is a federal solicitation for supplying medical needles, likely to support defense-related medical operations or inventories. Details such as the specific office address, place of performance, and contact information were not provided in the contract data. The contract is categorized under a solicitation type without any specified set-aside or NAICS code. The contracting opportunity was made publicly accessible through the Defense Logistics Agency’s online portal, allowing qualified suppliers to respond within the stipulated timeframe.

Defense Logistics Agency

POSTED

DEADLINE

TENSIOMETERThe contract involves the procurement of a single tensiometer, identified by the NSN/Part Number 6635-00-530-1130, under Purchase Request 7017077584. The solicitation, titled "TENSIOMETER," was issued by the Defense Logistics Agency, part of the Department of Defense, with the solicitation number SPE4A5-26-T-239J. The opportunity was posted on June 15, 2026, and responses were due by June 23, 2026. This procurement is classified as a federal solicitation, though there is no specified set-aside category or applicable NAICS code. The contract details indicate the procurement is managed by a federal agency without specific office or performance location information disclosed. The contract is part of the Department of Defense's efforts to acquire necessary equipment, ensuring timely response and compliance with federal solicitation procedures. Although direct points of contact and physical addresses are not provided, interested parties are directed to the Defense Logistics Agency's online portal for more information and submission of proposals.

Defense Logistics Agency

POSTED

DEADLINE

SUTURE, NONABSORBABLThe contract involves the procurement of nonabsorbable sutures, identified by the national stock number 6515-01-613-4307, with a total quantity requested of two units. This solicitation, numbered SPE2DS-26-T-153J, was issued by the Defense Logistics Agency under the Department of Defense. The request was posted on June 15, 2026, with a response deadline set for June 22, 2026. The contract is a solicitation type with no specific set-aside status or NAICS code indicated, and is intended for federal organization use. The place of performance and office address details are unspecified beyond the agency and organization names. The procurement process is conducted through the Defense Logistics Agency, ensuring compliance with government acquisition procedures. Further information and response submission can be accessed via the linked Defense Logistics Agency bidding system.

Defense Logistics Agency

POSTED

DEADLINE

TRAINING AID, PROSTHThe contract pertains to the procurement of a single unit of a training aid for prosthetics, identified by the national stock number 6910-01-656-5343. This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is designated as SPE2DH-26-T-4563 and was posted on June 15, 2026, with a response deadline of June 22, 2026. The contract type is a solicitation without any specified set-aside provisions or NAICS code. The purchase request number associated with this procurement is 7017156114, indicating the formal request for acquisition. The place of performance and precise office location details are not specified, and no contact information is provided. This acquisition is federally organized, emphasizing its role within the Department of Defense's logistics and supply chain efforts. The solicitation and related documents can be accessed through the Defense Logistics Agency’s bidding system online.

Defense Logistics Agency

POSTED

DEADLINE

RESUSCITATION KIT, MThe contract involves the procurement of a single resuscitation kit, designated as "RESUSCITATION KIT, M" with the National Stock Number 6515-01-513-9276. This solicitation, identified by the number SPE2DS-26-T-153V, was issued by the Defense Logistics Agency under the Department of Defense. The request was officially posted on June 15, 2026, with a deadline for response set a week later on June 22, 2026. The contract appears to be a straightforward procurement without any specific set-aside provisions or designated types of organizations for eligibility. The place of performance and point of contact details are unspecified, indicating either a flexible delivery location or pending contract award details. The solicitation is publicly available through the Defense Logistics Agency's DIBBS platform, ensuring transparency in the procurement process. This contract primarily focuses on acquiring essential medical equipment to support defense-related operational needs.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

This contract involves the procurement of a specific medical device known as the inhalant mask elbow connector, a valved tee adapter designed for use with nebulizers to safely introduce medication into respiratory circuits. The device features a spring-loaded valve that opens and closes during nebulizer insertion and removal, ensuring safety and convenience. It measures 22 mm in inner and outer diameter, is latex-free, intended for single use, and is packaged in cases of 30 units. The product is regulated by the FDA, and bidders must provide detailed information including source and part number. Packaging and marking must comply with military and medical standards to ensure the product’s protection and identification during shipment. The contract specifies delivery to Fort Bragg, NC, with a lead time of 20 days and delivery terms FOB destination. Inspection and acceptance points are also designated at the destination. The procurement must adhere to DLA technical and quality requirements, with packaging conforming to ASTM D3951 and marked per MIL-STD-129 and Medical Marking Standard No. 1 for defense logistics. Shipment instructions emphasize traceable delivery methods excluding parcel post. All contract documentation, including bidding and packaging standards, aligns with Department of Defense procedures for medical supplies, reflecting the strict quality control and regulatory oversight necessary for this type of medical equipment.

General Info

Procure 30-unit latex-free inhalant mask elbow connectors, FDA-regulated, delivered FOB Fort Bragg in 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

NAICS

339113 - Surgical Appliance and Supplies Manufacturing View NAICS

Place of Performance

BLDG 4, FORT BRAGG, NC, 28310, US

Set-Aside

NONE

Documents

(1)

RFQ SPE2DS-26-T-063U Medical Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 11

Solicitation

Response DeadlineMay 18

Deadline has passed

Submission Closed

05/18/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Office AddressUS

Contacts

Michael Small

contact@example.gov

+1 (555) 000-0000

Full Description

CONNECTOR,INHALANT
CONNECTOR<(>,<)> INHALANT MASK ELBOW, DRUG
DELIVERY SYSTEM
USED IN CONJUNCTION WITH A NEBULIZER,
THE VALVED TEE ADAPTER OFFERS A SAFE
AND CONVENIENT WAY TO INTRODUCE
MEDICATION INTO THE CIRCUIT; ITS
SPRING-LOADED VALVE OPENS AND CLOSES
THE CIRCUIT DURING NEBULIZER INSERTION
AND REMOVAL; DIM: 22MM I.D./O.D.,
LATEX FREE, SINGLE USE, 30S
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
UNIT OF ISSUE CASE, CS, OF 30S
.
BIDDER SHALL SPECIFY SOURCE AND
PART NUMBER BEING SUPPLIED.
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. .
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
SPE2DS-26-T-063U
SECTION B
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
VYAIRE MEDICAL INC 7RDL2 P/N 002060
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016713625 0001 CS 1.000
NSN/MATERIAL:6515016578343
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
HT0913
AMC BRAGG PA
2817 REILLY ROAD
BLDG 4
FORT BRAGG NC 28310
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
SPE2DS-26-T-063U
SECTION B
PR: 7016713625 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
HT0913
AMC BRAGG PA
2817 REILLY ROAD
BLDG 4
FORT BRAGG NC 28310
US
M/F: (TCN) HT091361264362
RDD:
PROJ: TP 3
SUPP ADD: YMEHS7 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A0A DIST: ADV: 2A FC: J6
Need Ship Date:00/00/0000 Original Required Delivery Date:05/12/2026
SPE2DS-26-T-063U NSN/Part Number: 6515-01-657-8343 Quantity: 1 CS Purchase Request: 7016713625QTY: 1 Delivery: 20 days ADO