Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CONNECTOR, INTRAVENOUS

Active
SPE2DS-26-T-255GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

456199 - All Other Health and Personal Care RetailersView NAICS

Place of Performance

BLDG 5505A WICKHAM AVE, FORT CAMPBELL, KY, 42223-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Allen Costello
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTOR,INTRAVENOUS INFUSION SYSTEM
CONNECTOR,INTRAVENOUS INFUSION SYSTEM
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SHALL BE MALE<(>,<)> NEEDLE-FREE<(>,<)> LATEX-FREE<(>,<)> DISPOSABLE
<(>,<)> STERILE AND SWABBABLE. USED AS A HEPARIN LOCK OR A SALINE LOCK.
RATED FOR 6 DAYS CONTINUOUS USE.
UNIT OF ISSUE EACH
SHALL HAVE A SHELF LIFE OF 36 MONTHS. NOT MORE THAN 5 SHALL HAVE ELAPSED
FROM THE DATE OF MANUFACTURE TO THE DATE OF DELIVERY TO THE GOVERNMENT.
MARKING ON ALL CONTAINERS SHALL INCLUDE THE LOT (CONTROL) NUMBER AND
DATE OF MANUFACTURE PREFIXED BY (MFD)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
SPE2DS-26-T-255G
SECTION B
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RS020: Shelf-life requirement RS001 for a TYPE I (CODE Q) item with a shelf life of 36 months (non-extendable) applies to this item.
ALTITUDE TECHNOLOGIES INC. 04JV2 P/N 02157
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017548732 0001 EA 50.000
NSN/MATERIAL:6515016268000
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W34GMT
0129 CS BN CO A COMPOSITE
AWCF SSF
BLDG 5505A WICKHAM AVE
FORT CAMPBELL KY 42223-5000
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W34GMT
SPE2DS-26-T-255G
SECTION B
PR: 7017548732 PRLI: 0001 CONT’D
0129 CS BN CO A COMPOSITE
AWCF SSF
BLDG 5505A WICKHAM AVE
FORT CAMPBELL KY 42223-5000
US
MARKFOR
W34GMT
0129 CS BN CO A COMPOSITE
AWCF SSF
BLDG 5505A WICKHAM AVE
FORT CAMPBELL KY 42223-5000
US
M/F: (TCN) W34GMT61980049
RDD: 211
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026
SPE2DS-26-T-255G NSN/Part Number: 6515-01-626-8000 Quantity: 50 EA Purchase Request: 7017548732QTY: 50 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 456199
New
DIBBS
CLAMP, HEMORRHAGE COThe contract is for a combat-ready hemorrhage control clamp designed to rapidly control severe bleeding through self-application or buddy application, constructed from medical-grade polycarbonate plastic and stainless steel, and supplied sterile. The device is classified as a TYPE I item with a non-extendable shelf life of 48 months and is subject to stringent technical and quality requirements defined in the DLA Master List, with the applicable revision determined by the solicitation or award date. It is governed by DLA packaging standards, and covered defense information protocols apply to the procurement. Supplies must comply with requirements for removal of government identification from non-accepted items. The item is identified by NSN 6515-01-629-7044 with a unit of issue of one each, under solicitation SPE2DS-26-T-252X, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF office. Bidders must specify the source and part number being offered, with proposals due by July 27, 2026, and delivery required within 20 days of award to an FPO address.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
FILTER ELEMENT, VENTILAThe contract specifies the procurement of a HEPA filter element for ventilators, identified by part number 28022 and NSN 6515-01-630-1354, supplied by Teleflex Medical with CAGE code 1SL40. The item is to be delivered in a single box containing twenty units, with a firm delivery deadline of 20 days from the required date of July 21, 2026, under FOB destination terms. Delivery is required to a military medical facility in Busan, South Korea, with a strict zero variance allowance on quantity. All packaging must comply with commercial standards as defined in the procurement documentation, ensuring each unit is sealed in a protective container to prevent damage, and all shipping containers must be suitable for safe, cost-effective transport by common carriers. The material must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contract is subject to applicable defense information controls. The item is part of a medical acquisition under a Department of Defense solicitation issued on July 19, 2026, with a response deadline of July 27, 2026, and is managed by the Medical Supply Chain Medical Surgical Federal Supply Facility.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
FRAME, SPECTACLEThe contract is for the procurement of a spectacle frame, identified by NSN 6540-01-631-0160, with a unit of issue of each and a quantity of one unit. The item features black spring hinge temples and must comply with DLA packaging and technical requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition scale. Bidders are required to specify the source and part number being supplied. The contract has a delivery requirement of 20 days after order placement and is associated with purchase request 7017485361. The solicitation number is SPE2DS-26-T-247P, issued on July 19, 2026, with responses due by July 27, 2026. The contract falls under NAICS code 456199 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF office, with performance to be delivered to Fort Hood, Texas, 76544. Primary point of contact is Tiffany Parker, reachable via email and phone listed in the data.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 6 days
View Details
NAICS: 456199
New
DIBBS
INTUBATION KITThe intubation kit is a disposable medical supply containing a single endotracheal tube with a stylet, a 10 cc syringe, a velcro tube tie, and a packet of surgical lubricant, issued individually as one unit. The product must have a minimum shelf life of 24 months, and no more than three months may have elapsed between the date of manufacture and delivery to the government. All packaging must clearly display the NSN, manufacturer name, CAGE code, date of manufacture, expiration or retest date, contract number, and lot number. The kit must comply with technical and quality requirements referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must meet DLA standards, and any non-accepted supplies must have government identification removed prior to return. The NSN is 6515-01-632-4831, with a sole quantity of one unit under purchase request 7017526905, requiring delivery within 20 days of award to Nellis AFB, Nevada. The solicitation number is SPE2DS-26-T-247X, issued July 19, 2026, with responses due by July 27, 2026, under the NAICS code 456199 and managed by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 6 days
View Details
NAICS: 456199
New
DIBBS
PORCELAIN REPAIR KIThe contract calls for the procurement of a single porcelain repair kit designated by NSN 6520-01-577-8543, consisting of six 1.2 mL syringes including Permaflo Dentin Opaquer, EtchArrest, OpalDam, Peak Universal Bond, Porcelain Etch, and Ultradent Silane, along with eighty Brush Tips comprising four different types: Black Mini, Black Micro, Micro 20 Ga, and Inspiral. All components must be sealed in a unit container that protects against damage and packaged in commercial exterior shipping containers suitable for safe transport via common carrier at the lowest rate, with export packaging applied as needed. The kit must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and require labeling with the date of manufacture, expiration or retest date, contract number, and lot number in accordance with MMS1B. The product must have an 18-month shelf life, with no more than three months elapsed between manufacturing and government delivery. Compliance with FDA regulations is implied due to the medical nature of the components, and all hazardous materials must meet Hazard Communication Standard requirements with Safety Data Sheets submitted prior to award. Delivery is required within 20 days of the solicitation date to FPO AP 96672-4090 under FOB Destination terms, with inspection and acceptance performed by the Government at the delivery point. The solicitation number is SPE2DH-26-T-5265, issued on July 16, 2026, with responses due by July 23, 2026, and must be submitted exclusively via the DIBBS portal. The contract incorporates numerous FAR and DFARS clauses related to labor standards, cybersecurity, trafficking in persons, sustainable products, subcontracting, inspection, default, safeguarding information systems, and prohibited procurement of certain telecommunications equipment, alongside specific DFARS clauses mandating compliance with NIST SP 800-171, reporting cyber incidents, and controlling defense information. Offerors must provide their UEI and certify size status and socioeconomic classifications if claiming small business or other designated categories, and must disclose any covered defense telecommunications equipment or services, along with associated CAGE codes and UEIs for joint venture partners. Packaging and labeling must align with DLA’s RP001 requirements and ASTM D3951 for non-hazardous materials, while
MEDICAL SUPPLY CHAIIN FSH

POSTED

6 days ago

DEADLINE

in 1 day
View Details
NAICS: 456199
New
DIBBS
BLANKET, HYPOTHERMIAThe contract pertains to the procurement of 17 units of a hypothermia blanket under solicitation SPE2DH-26-T-5256, with a required delivery date of July 20, 2026, and a 20-day delivery window after order placement. The item is a commercial medical device regulated by the FDA, manufactured by NORTH AMERICAN RESCUE, LLC with part number ZZ-0051, and identified by NSN 6532016277888. Each unit measures 78 inches in length by 43 inches in width, is packaged in sealed containers measuring 10 inches high by 6.75 inches wide by 2.5 inches deep, and weighs 1 pound 13 ounces. The blanket features a tapered design for optimal thermal insulation, a built-in hood, an integrated fluid absorption pad, and continuous 1.5-inch Velcro closures for rapid casualty access, with a weight capacity of 250 pounds. All packaging and marking must adhere to the Medical Marking Standard No. 1, which supersedes MIL-STD-129 for medical acquisitions, and must comply with ASTM D3951 unless overridden by the DLA Master List of Technical and Quality Requirements. Palletization must follow RP001 DLA Packaging Requirements, and shipments must be sent via traceable means, prohibiting parcel post. Delivery is FOB destination to Gulfport, Mississippi, with inspection and acceptance conducted at the delivery point by the government. The contract specifies the use of electronic invoicing through WAWF and requires compliance with multiple FAR and DFARS clauses including those addressing hazardous materials, whistleblower rights, employment eligibility, trafficking in persons, sustainable products, and NIST SP 800-171 cybersecurity requirements. The solicitation allows for small business set-asides and requires offerors to affirm their size status and socioeconomic certifications through the Unique Entity Identifier and CAGE code systems. Pricing details are incomplete in the contract data, though the unit price is listed as $17.00, totaling $289 for 17 units. The contracting officer retains discretion in award determination, and all suppliers must complete required forms via the DIBBS portal, with submissions due by July 23, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 456199
New
DIBBS
POINT, ENDODONTICThe contract solicits a single box of 120 gutta percha points for endodontic use, identified by the NSN 6520-01-643-3521, with each point color-coded and sized between 45 and 80, all at a consistent 30mm length. The unit of issue is a box of 120, and delivery is required within five days after order placement at JBER, Alaska, 99506-4400, under FOB Destination terms. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and packaging must comply with MIL-STD-2073-1E, QUP: 001, Packing Level B, as well as DLA-specific requirements RP001 and Medical Marking Standard No. 1, which supersedes MIL-STD-129 for medical items. Commercial packaging per ASTM D3951 is required unless the material is hazardous, in which case FED-STD-313 and TQ requirement IP025 apply. The product must be marked and packed to ensure safe transport and acceptance by common carriers, with government identification removed from any non-accepted supplies. The solicitation, issued as a Request for Quotations under SPE2DH-26-T-5202 by the Department of Defense’s Medical Supply Chain, falls under NAICS code 456199 and is not a small business set-aside, though HUBZone price preferences may be applied. Compliance with the Buy American Act and Berry Amendment is mandatory, and cybersecurity requirements include safeguarding covered defense information per FAR 252.204-7012 and adherence to NIST SP 800-171. Contractors must be registered in SAM and WAWF, submit invoices and receiving reports electronically via WAWF, and comply with prohibitions on hazardous materials, human trafficking, and unauthorized disclosure of information. Representations regarding small business status, covered telecommunications equipment, and entity identifiers are required. The contract incorporates numerous clauses addressing whistleblower rights, confidentiality, labor standards, transportation, safety, and contractor performance risk notifications, with deviations from standard FAR provisions effective under deviation 2026-00038 for key administrative and compliance sections.
MEDICAL SUPPLY CHAIIN FSH

POSTED

7 days ago

DEADLINE

in about 16 hours
View Details
NAICS: 456199
SLED
Hygiene Items - DOC-PEThe contract titled Hygiene Items - DOC-PE is a solicitation issued by the Louisiana Procurement agency under the state-level government entity, targeting the supply of hygiene-related products. The solicitation was posted on July 14, 2026, with a response deadline of July 28, 2026, at 4:00 PM Eastern Time, and is open to eligible responders under the SLED classification, indicating it is intended for state, local, or educational entities. There is no designated set-aside type or NAICS code provided, suggesting the opportunity is open to a broad range of vendors without specific small business or diversity targets. Performance of the contract will occur within the state of Louisiana, and the procurement is managed through the Louisiana Office of State Procurement. All inquiries and communications should be directed to the primary point of contact, the LaPAC Help Group, via email at doa-osphelpdesk@la.gov or by phone at 225-342-8010. Further details and participation instructions can be accessed through the official online portal linked in the contract data.
Procurement

POSTED

8 days ago

DEADLINE

in 6 days
View Details
NAICS: 456199
SLED
Toothbrushes for Austin SSLCThe Texas Health and Human Services Commission is soliciting bids for a blanket order to supply anti-shank and soft toothbrushes for adult use under solicitation number HHS0017608. The solicitation was posted on July 9, 2026, with responses due by July 23, 2026, at 4:30 PM Central Time. The contract is intended for state, local, and educational use, and the products will be delivered to facilities within Texas. The primary point of contact for questions or additional information is Ana Breest, reachable via email at Ana.Breest@hhs.texas.gov or by phone at 512-406-2679. All purchases under this blanket order will be managed through the Texas SmartBuy portal, and the specific requirements for product specifications, packaging, and delivery will be outlined in the official solicitation document available at the provided URL.
Health and Human Services Commission

POSTED

12 days ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
NEBULIZER, MEDICINALThe contract specifies the procurement of 50 units of a medicinal nebulizer, each comprising a mouthpiece, TEE, 7-foot tubing, and a 6-inch flex tube, with the unit of issue listed as PG/50EACH. Each complete unit must be sealed in a protective container to prevent damage or breakage and packed in commercial shipping containers suitable for safe transport via common carriers at the lowest cost to the delivery point at Fort Campbell, Tennessee. All items must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and markings must be applied in accordance with this standard, which is available through DLA Troop Support. The procurement is governed by technical and quality requirements from the DLA Master List, with applicable revisions tied to the solicitation or award date. Bidders are required to clearly identify the source and part number of the supplied product. The NSN is 6515-01-466-0371, with a delivery requirement of 20 days after order award under solicitation SPE2DS-26-T-254Q, issued by the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
BAG, URINE COLLECTIONThe contract is for a urine collection bag with a 2000 CC capacity, featuring 182.88 cm (72 inch) tubing and a 400 mL urine meter with a white background and graduated markings, including a small burette chamber and a spring-loaded sample port designed for use with a Foley catheter. The package includes a Foley tray and a 10 CC prefilled syringe in 18 French size with a 5 CC capacity, supplied as a disposable unit in packages of ten. The item is identified by NSN 6515-01-406-7748, with a quantity of two packages required, under purchase request 7017553324, and delivery must be completed within 20 days of award. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring that each unit is sealed and protected against damage and that shipping containers guarantee safe delivery at the lowest cost to the specified point of performance at Scott AFB, 62225-5252. The solicitation is issued under SPE2DS-26-T-255A with a submission deadline of July 27, 2026, and incorporates referenced technical and quality requirements from the DLA Master List, requiring bidders to specify the exact source and part number being offered. Compliance with DLA packaging and marking directives is mandatory for all medical acquisitions under this solicitation.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
CHIP, CARBON DIOXIDEThe item specified is a CHIP, CARBON DIOXIDE, a single-use diagnostic component containing ten measurement capillaries pre-filled with a carbon dioxide reagent designed for use with the CMS gas analyzer. It has a measurement range of 200 to 3000 ppm and is issued in individual units. The contract requires strict compliance with technical and quality standards referenced in the DLA Master List, including packaging per DLA requirements, removal of government identification from non-accepted supplies, and adherence to Medical Marking Standard No. 1 which supersedes MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport via common carrier at the lowest cost to Joint Base Andrews, Maryland. The item carries a non-extendable shelf life of 24 months, with the condition that no more than three months may have elapsed between date of manufacture and government delivery. Labeling must include the date of manufacture, expiration date, retest date, contract number, and lot number in accordance with the latest revision of MMS1C. The procurement is governed by solicitation SPE2DS-26-T-254L, with a deadline for response on July 27, 2026, and a delivery date of 20 days after award. Two units are required under purchase request 7017553325, and the contract falls under NAICS code 621410 as a federal medical supply acquisition managed by the Department of Defense through the Medical Supply Chain MD Surg FSF.
Family Planning Centers

POSTED

about 12 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
ADAPTER, OXYGEN FLOWThe adapter is a flexible silicone device designed to connect a Passy Muir Valve to ventilator tubing or closed suction systems, featuring a 22mm outer diameter that stretches to ensure a secure fit. It is color-coded purple for compatibility with the PMV 2001 model and is also usable with the PMV 2000 and PMV 005. The adapter is latex-free and intended for use within ventilator circuits to facilitate airflow control while maintaining a reliable seal. It is sold individually, with the unit of issue listed as each. The product is identified by NSN 6515-01-722-3342 and must be marked according to the latest Medical Marking Standard No. 1. Bidders are required to specify the source and part number being supplied. The procurement falls under solicitation SPE2DS-26-T-255Y, issued by the Department of Defense’s Medical Supply Chain MD SURG FSF, with a response deadline of July 27, 2026. Delivery is required within five days of award, and the contract incorporates DLA technical, quality, and packaging requirements, including the removal of government identification from non-accepted supplies.
Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 5 days
View Details
NAICS: 315990
New
DIBBS
APRON, CRYOGENICThe cryogenic apron is a multi-layer protective garment measuring 42 inches in length and 24 inches in width, designed to safeguard the torso and upper legs from extreme cold exposure caused by direct contact with cryogenic materials or splashes of supercooled liquids. Constructed from material capable of withstanding temperatures ranging from -162 to +148 degrees Celsius (-260 to +300 degrees Fahrenheit), it features adjustable straps and quick-release buckles at both the waist and neck for secure, customizable fit and rapid removal in emergencies. Proper storage requires a clean, dry environment to maintain performance integrity. The item is sold as a single unit, identified by NSN 8415-01-497-6110, with a requirement for one unit under purchase request 7017556478 and delivery expected within five days of award. Compliance with DLA packaging and technical requirements is mandatory, referencing the DLA Master List of Technical and Quality Requirements, and bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-255H by the Department of Defense through the Medical Supply Chain MD Surg FSF, has a response deadline of July 27, 2026, and is targeted at federal suppliers with performance directed to APO ZIP 96328-5225.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
CATHETERIZATION KIT, URThe contract specifies the procurement of a urethral catheterization kit, identified by NSN 6515-01-615-2124, containing a 16 Fr Foley catheter with a 2000 mL anti-reflux valve bag, designed for infection control and including a complete set of sterile accessories: drape, underpad, specimen container, five prep balls, povidone-iodine solution, gloves, dual prefilled syringes (10 cc sterile water and 10 cc lubricant), and forceps. Each unit is packaged as a sealed tray of ten kits, with the unit of issue defined as a packaged group of ten. The product must have a mandatory 36-month shelf life, with no more than five months elapsed from manufacture to government delivery. Labeling must include NSN, manufacturer and CAGE code, date of manufacture or expiration, contract number, and lot number, in compliance with Medical Marking Standard No. 1, which replaces MIL-STD-129. Packaging must meet commercial standards under DLA’s RP001 requirements, protect against damage, and be shipped in suitable exterior containers to ensure safe, low-cost delivery to the destination. All packaging and labeling must adhere to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards like ASTM D3951. The product is FDA-regulated and subject to referral verification in EBS. Delivery is FOB destination, with zero tolerance for quantity variance. Two shipments totaling one package each are required, with delivery deadlines of July 22 and July 23, 2026, to Fort Bragg, North Carolina, and USS Charleston, respectively. All shipments must use traceable transportation methods, prohibiting parcel post, and palletization must comply with DLA packaging guidelines.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
DRESSING, OCCLUSIVE, ADHThis contract specifies the procurement of TEGADERM Transparent Occlusive Adhesive Dressings, each measuring 2.375 inches wide by 2.750 inches in length, intended for use as a sterile dressing for peripheral and central intravenous catheters or as a wound covering. The product is to be supplied in individually packaged units, with a unit of issue consisting of 100 packages per lot. The dressings must have a shelf life of 36 months from the date of manufacture, and no more than five months may have elapsed between the manufacturer’s date and delivery to the government. All markings must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and must include the date of manufacture, expiration or retest date, contract number, and lot number. Packaging must adhere to commercial standards, ensuring protection from damage during transit, with interior units sealed in suitable containers and exterior shipping containers designed for safe, low-cost delivery via common carrier to the specified point of delivery, including FPO destinations. The item is identified by NSN 6510-01-234-8943, with a required quantity of three packages, and delivery must occur within 20 days of award. The solicitation number is SPE2DS-26-T-255V, with a response deadline in July 2026, and all technical and quality requirements referenced under R-numbers are governed by the DLA Master List of Technical and Quality Requirements in effect at the time of solicitation. The supplier must clearly state the source and part number being offered, and government identification must be removed from any non-accepted supplies in accordance with RQ011.
Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
CURETTE, EAR
Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
TEST STRIPS, GLUCOSE
Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
CUFF, SPHYGMOMANOMETERThe contract specifies the procurement of pediatric-sized non-invasive blood pressure cuffs, with bladder dimensions of 3.5 inches in width and 7.1 inches in length, designed for limb circumferences between 18 and 26 centimeters. This item serves as a replacement component for NSNs 6515-01-582-4060 and 6515-01-582-4072, and is identified by NSN 6515-01-593-8773 and Philips part number 40401B. Three units are required, each to be delivered as a single unit of issue, with a firm delivery deadline of 20 days after award, FOB destination, and no variance permitted in quantity. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must also meet ASTM D3951 standards, with DLA Master List of Technical and Quality Requirements taking precedence. Packaging must ensure protection from damage and be suitable for commercial shipping, using sealed unit containers and secure exterior shipping containers capable of safe transport at the lowest rate. The shipment must be traceable and cannot be sent via parcel post. Delivery is to the U.S. Air Force Medical Command at Fort Sam Houston, San Antonio, Texas, with the required delivery date set for July 23, 2026. The supplier, Philips North America LLC, must adhere to all DLA packaging and marking requirements under RP001 and ensure full compliance with government procurement specifications for medical equipment.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
DRAPE, WOUND CARE
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, ACUPUNCTURE
Surgical and Medical Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 5 days
View Details