Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CONNECTOR, PLUG, ELECTRI

Active
SPE7M5-26-T-308KFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a connector plug, electrical, identified by NSN 5935-01-276-0612 and part number D38999/46WF32SN, governed by military specification MIL-DTL-38999/46B and referenced under solicitation SPE7M5-26-T-308K. The item is classified as a critical application item and must comply with the Qualified Products List (QPL) requirements for Federal Stock Class 5935 connector assemblies and contacts. Manufacturing by certain vendors is restricted: materials produced by Amphenol (CAGE 77820), Matrix (CAGE 14283), or Pyle National (CAGE 49367) with lot dates between July 2006 and June 2016 are unacceptable, as are those produced by Bendix Corporation (CAGE 77820) between January 1977 and February 1984. Use of any Class I ozone-depleting substances is strictly prohibited in design, manufacturing, or cleaning processes without explicit written approval from the Contracting Officer. Traceability documentation may be demanded to verify manufacturing origin and dates. The item must be procured in quantities of 64 units, delivered FOB origin within 168 days, with no variance allowed in quantity. Inspection and acceptance occur at the destination facility in Tracy, California. Packaging must comply with MIL-STD-129 for marking and labeling, and with either ASTM D3951 for non-hazardous items or FED-STD-313 TQ requirement IP025 if hazardous, with all DLA Master List technical and quality requirements taking precedence over commercial standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes must be verified at specified levels with AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Palletization adheres to DLA packaging requirements, and delivery must reach the designated warehouse by the original required date of November 20, 2026, with a need ship date of January 5, 2027. The unit price is $64.00 per unit, totaling $4

General Info

Procurement of 64 electrical connectors for U.S. government via DLA, solicited July 9, 2026, due July 20, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-308K.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Margaret Smith
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTOR,PLUG,ELECTRICAL
CONNECTOR,PLUG,ELEC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ012: QUALIFIED PRODUCTS LIST (QPL) CONNECTOR ASSEMBLIES AND QPL
ELECTRICAL CONTACTS. THIS IS A QUALIFIED ITEM. QUALIFICATION
REQUIREMENTS IN PROCUREMENT NOTE H01 "QUALIFIED PRODUCTS LIST (QPL) FOR
FEDERAL STOCK CLASS (FSC) 5935 CONNECTOR ASSEMBLIES AND CONTACTS" APPLY.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Material manufactured by Amphenol CAGE (77820), Matrix CAGE (14283), or Pyle National CAGE (49367) with lot date codes from July 2006 through June 2016 is not acceptable whether offered as new material or surplus.
Traceability documents may be required by the Government before or after award to establish manufacturing dates and sources.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MATERIAL MANUFACTURED BY BENDIX CORPORATION
CAGE 77820, WITH LOT DATE CODES FROM JANUARY
1977 THROUGH FEBRUARY 1984 ARE NOT ACCEPTABLE.
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
SPE7M5-26-T-308K
SECTION B
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
THIS NSN IS LISTED AS A PRIMARY QPL OR QML THEREFORE
THE QUALIFIED PRODUCTS LIST OR QUALIFIED MANUFACTURERS
LIST IS APPLICABLE.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-38999N(1) REVISION NR N DTD 09/14/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-38999/46B(1) NOT 3 REVISION NR B DTD 12/18/2024 PART PIECE NUMBER: D38999/46WF32SN
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017438099 0001 EA 64.000
NSN/MATERIAL:5935012760612
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE7M5-26-T-308K
SECTION B
PR: 7017438099 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/05/2027 Original Required Delivery Date:11/20/2026
SPE7M5-26-T-308K NSN/Part Number: 5935-01-276-0612 Quantity: 64 EA Purchase Request: 7017438099QTY: 64 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332112
New
DIBBS
Precision Metal Fabrication of Bearing LinerThe contract requires the manufacture of a precision-engineered bearing housing liner to full military specifications, demanding exacting adherence to dimensional tolerances, material composition, and quality control standards for use in defense applications. The product must meet rigorous performance and reliability criteria appropriate for critical military systems, with all manufacturing processes subject to strict compliance verification. Subcontractors are expected to demonstrate capability in high-precision metal fabrication and quality assurance protocols consistent with defense industry requirements. The solicitation is issued under NAICS code 332112 for forged and stamped metal product manufacturing, classified as a subcontract opportunity posted by the ASC Commodities Division of the Department of Defense. The response deadline is set for July 28, 2026, with performance to be carried out at FPO, ZIP 96306-1204. All submissions must be received by the stated deadline through the official DIBBS portal, and technical and compliance qualifications will be evaluated to ensure alignment with military-grade standards. There is no set-aside designation specified, meaning the contract is open to all eligible subcontractors capable of fulfilling the technical and logistical demands.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
Precision Electrical Connector ManufacturingThe contract requires the manufacture of military-grade electrical connectors conforming to the MIL-DTL-38999N Revision N specification, specifically the D38999/24WJ20SB model, with full compliance to all defense standards for materials, processing, and performance. Every production step must include rigorous traceability documentation from raw material sourcing through final assembly, ensuring complete accountability and quality assurance. Inspections must be conducted per applicable military and industry protocols, with all inspection records retained and available for audit. Packaging must meet stringent defense requirements to protect against environmental damage and ensure readiness upon delivery. The work is classified as a subcontract under the NAICS code 332112, issued by the Department of Defense through the Maritime Supply Chain office. The solicitation was posted on July 20, 2026, with responses due by August 4, 2026. All delivered units must be fully certified, properly labeled, and shipped in accordance with defense logistics procedures to ensure seamless integration into military systems. The place of performance and point of contact details are not specified, but adherence to the exact technical parameters and documentation requirements is mandatory for contract fulfillment.
MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332112
New
DIBBS
Machine Bolt Manufacturing and SupplyThe contract calls for the manufacture and supply of 112 machine bolts designated by NSN 5306-01-492-6795, all of which must meet strict military specifications covering quality, packaging, labeling, and environmental compliance, including a mandatory mercury-free production process. These components are intended for critical military use and must adhere to exacting standards to ensure performance, durability, and safety under operational conditions. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, reinforcing the government’s commitment to supporting small business participation in defense contracting. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, and the performance location is specified as Tracy, California, with a ZIP code of 95304-5000. The contracting activity falls under the ASC Commodities Division of the Department of Defense, and the appropriate NAICS code is 332112, which classifies the work within the forging and stamping industry. The contract is accessible via the DIBBS platform, and all bidders must ensure full compliance with federal acquisition regulations, particularly those pertaining to small business set-asides, as well as the technical and environmental requirements outlined for the bolts.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
Precision Metal Forging and Stamping for Connecting Link, RigThe contract entails the manufacturing of 59,000 units of the Connecting Link, Rig, identified by NSN 3040014537807, adhering strictly to military specifications RA001 and packaging standard RP001. This is a subcontract under the broader procurement framework managed by the Defense Logistics Agency within the Department of Defense, focusing on precision metal forging and stamping processes to meet exacting defense requirements. The work is not tied to a specific geographic performance location, and no set-aside preferences are indicated, suggesting it is open to qualified subcontractors regardless of business size or ownership characteristics. The solicitation was posted on July 20, 2026, and is associated with the NAICS code 332112, which classifies the work under Forging and Stamping. Although no point of contact or detailed office address is provided, the contract can be accessed through the DIBBS system using the reference number SPE7L226P0084. The production volume and adherence to specific military standards indicate this is a critical supply requirement for military equipment, where quality, consistency, and compliance are paramount. The absence of a sole source or set-aside designation implies competitive bidding among qualified metalworking contractors capable of fulfilling the technical and volume demands.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 332112
New
DIBBS
Precision Forging of Bell Crank ComponentsThe contract entails the precision forging of high-integrity aluminum or steel blanks specifically for the bell crank component identified by NSN 3040-01-158-6089 and part number 70400-02502-046, produced to stringent aerospace material and dimensional standards. The manufacturing process must ensure structural integrity, dimensional accuracy, and compliance with aerospace-grade specifications, as the component is critical to mechanical systems within defense equipment. The work is classified as a subcontract under NAICS code 332112, indicating it falls within the forging and stamping industry, and is awarded through the Defense Logistics Agency under the Department of Defense. Performance of the contract is expected to meet all technical and quality benchmarks required for military aerospace applications, though specific delivery locations or points of contact are not detailed in the provided data. The posting date indicates the solicitation was made in July 2026, suggesting this is a forward-looking procurement activity, and the award is linked to contract SPE4A122G0005 with delivery identifier SPE4A526F7873, providing traceability through DLA’s procurement system. The subcontract structure implies the prime contractor or system integrator is managing the broader assembly while delegating this highly specialized forging task to a qualified supplier with proven capability in high-strength metal component production.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 332112
New
DIBBS
Raw Material Sourcing and Forging for Aerospace ComponentsThe contract entails the supply of certified raw materials such as aluminum and steel alloys, alongside comprehensive forging services required for the production of aerospace surge tank mounting assemblies. All materials must be supplied with full material traceability from the mill through to the finished component, including the provision of certified Material Test Reports to ensure compliance with stringent aerospace quality standards. The forged parts must meet exacting technical and performance specifications critical to the operational integrity of defense-related aerospace systems. This subcontract is administered by the Defense Logistics Agency under the Department of Defense, with the NAICS code 332112 indicating classification within the forging and stamping industry. The work is performed in support of national defense infrastructure and requires adherence to rigorous documentation and verification protocols to guarantee material authenticity and process control. The contract was posted on July 20, 2026, and is linked to a specific award identification, indicating its integration into broader defense supply chain operations.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINEThe contract is for the procurement of 112 machine bolts identified by NSN 5306-01-492-6795 under solicitation SPE4A6-26-T-07XC, issued by the Department of Defense’s ASC Commodities Division. The requirement is a total small business set-aside under NAICS code 332112, with responses due by July 28, 2026, and delivery expected within 258 days after order placement. The item is subject to multiple technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect at the solicitation issue date. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. The technical data associated with this item is controlled under ITAR or EAR, restricting its export or disclosure to foreign persons unless authorized by the Department of State or Commerce, and only contractors with approved JCP certification, completed export control training, and DLA authorization may access such data. The place of performance is Tracy, California, with Tyler Greene as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINEThe contract solicitation SPE4A6-26-T-05KR is for the procurement of machine bolts with NSN 5306-00-116-7791, designated as a Critical Application Item and identified as a GE PBL item under a simplified acquisition framework. The total requirement is for 1,817 units divided into two line items: 414 units at $414.00 each and 1,403 units at $1,403.00 each, with delivery mandated within 191 days of the award date. FOB origin terms apply, with inspection and acceptance occurring at the manufacturer’s facility, and supplies must be packaged per ASTM D3951 while strictly adhering to the superior DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for labeling and RP001 for palletization. The contract incorporates comprehensive quality assurance provisions through RQ001, RQ006, RQ009, RQ011, and RQ017, requiring manufacturers to maintain inspection systems compliant with SAE AS9003 or ISO 9001 tailored to SAE AS9003, and enforcing zero-defect sampling standards under MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major, and MIL-STD-105/ASQ Z1.4 may be used only if zero non-conformances are achieved in the sample lot. The solicitation imposes stringent compliance obligations including full adherence to the Berry Amendment and Buy American Act with a reduced threshold of $150,000, requiring disclosure of any non-domestic materials. Contractors must implement cybersecurity controls compliant with NIST SP 800-171 under DFARS 252.240-7997 and safeguard Covered Defense Information per FAR 252.204-7012, while also abiding by prohibitions on covered telecommunications equipment and mandatory arbitration agreements. Participation requires active registration and current representations in the System for Award Management (SAM), including small business size status under NAICS 332112, and submission of a Certificate of Quality
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, RECEPTACLE, EThis contract involves the procurement of a precision electrical connector, receptacle type, identified by NSN 5935014604596 and part number D38999/24WJ20SB, governed by MIL-DTL-38999N Revision N dated September 14, 2023, and TDP Rev A Gen 1. The item is classified as a qualified product under the Qualified Products List for Federal Stock Class 5935, meaning only manufacturers pre-qualified per procurement note H01 are eligible. Manufacturing traceability is mandatory, with materials produced by Amphenol, Matrix, or Pyle National between July 2006 and June 2016 explicitly prohibited regardless of condition, and traceability documentation may be requested before or after award. The use of any Class I ozone-depleting substances in design, manufacturing, testing, or cleaning is strictly prohibited unless prior written approval from the contracting officer is obtained, and this prohibition overrides all other specification requirements while maintaining performance standards. The item is designated as critical application and must be delivered FOB origin with no variance allowed in quantity—exactly ten units at a unit price not specified, delivered in 81 days. Packaging and labeling must strictly adhere to MIL-STD-129, with hazardous materials packaged per IP025 and non-hazardous materials per ASTM D3951, though all DLA Master List requirements supersede ASTM standards. Palletization must comply with RP001, and bare items must be permanently marked with CAGE code and lot/date codes as required by RQ017. The contract type is an indefinite-delivery vehicle under the Department of Defense’s Maritime Supply Chain with a ceiling value of $350,000 and a guaranteed minimum of one unit. Inspections and acceptances occur at destination, and all deliveries must be invoiced through WAWF. Compliance with federal cybersecurity standards, including NIST SP 800-171 and FAR 52.204-7012, is required alongside flow-down obligations to subcontractors, including hazardous material reporting and U.S.-flag vessel use for international shipments, which demands advanced waiver requests if applicable. Contractors must affirm their size status, UEI, and CAGE code, and represent compliance with anti-trafficking, employment eligibility, sustainable product, and whistleblower rights provisions. No attachments are formally
MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINEThe contract is for the procurement of 2,454 machine bolts identified by NSN 5306-00-177-5559 under purchase request 7017409847, with a total price of $2,454.00 per unit. The items must comply with Technical Data Package Revision A Generation 1 standards referenced to SAE AS9530B, SAE AS7452, and QAP 13873 CDRL-COQC-19071. Delivery is required within 293 days FOB origin, with no variance allowed in quantity, and acceptance occurs at the point of origin. Packaging must adhere to ASTM D3951 with precedence given to the DLA Master List of Technical and Quality Requirements, and all items must be marked and labeled per MIL-STD-129 with palletization following RP001 DLA Packaging Requirements. The unit of issue is each, and the delivery destination is DLA Distribution Warner Robins at Robins AFB, Georgia. The required delivery date is November 20, 2027, with a need ship date of May 18, 2027. Transportation logistics are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE4A6-26-T-07ZR, issued by the Department of Defense’s ASC Commodities Division, with a response deadline of July 28, 2026. Primary point of contact is Debra Fowler.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, PLUG, ELECTRIThe contract specifies the procurement of a single electrical plug connector, part number MS3147E12-50S, with a National Stock Number of 5935-00-247-8298, requiring a quantity of twelve units. This is a qualified item under the Qualified Products List (QPL) for Federal Stock Class 5935, and only sources qualified under SAE-AS81703 and referenced in specification MIL-C-81703 Supplement 1A are acceptable; commercial substitutes are prohibited without explicit written government approval. The item is designated as critical application, necessitating strict adherence to technical documentation revisions TDP Rev A Gen 1, with no exceptions for non-conforming components. Manufacturing processes are strictly restricted from using Class I ozone-depleting substances unless written approval from the contracting officer is obtained, and mercury or mercury compounds are banned from contact with the item except in narrowly defined exceptions such as batteries, lighting, and specific instruments, with additional containment requirements for portable devices. Packaging must comply with DLA’s master requirements, including MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging if non-hazardous, though DLA’s technical requirements supersede all other standards. The item must be delivered FOB origin within 168 days to Robins Air Force Base, Georgia, with zero tolerance for quantity variance, inspected and accepted at destination, and palletized per RP001 guidelines. The contract’s performance deadline is January 5, 2027, with an original delivery requirement of February 14, 2027, under solicitation SPE7M5-26-T-312E, issued by the Department of Defense’s Active Devices Division, and responses were due by July 20, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332112
New
DIBBS
COMPRESSOR, REFRIGERATIThe contract pertains to the procurement of 14 units of a refrigeration compressor, identified by NSN 4130-01-574-7713 and part number 18-00091-113 from Carrier Corp, under solicitation SPE8E8-26-T-4765. Delivery is required within 195 days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951, unless superseded by higher-priority DLA Master List of Technical and Quality Requirements, which take full precedence. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The unit of issue is each, with a total contract value of $14.00 per unit. The designated delivery point is the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002. The original required delivery date is February 18, 2027, with a need ship date of February 12, 2027. Transportation and freight shipping instructions are governed by DLAD Proc Notes C19 and C20. Documentation for source approval and handling of covered defense information are applicable, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the solicitation issue date. The contract was posted July 20, 2026, with responses due by July 31, 2026, under NAICS code 332112.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
WAWF Invoicing and Payment Processing ServicesThe contract requires the submission of electronic invoices and receiving reports through the Wide Area WorkFlow system in strict adherence to DFARS 252.232-7006, utilizing either the Invoice 2in1 format or the standard electronic formats prescribed by the Department of Defense. All submissions must be accurately structured and timely delivered to ensure compliance and proper payment processing. The work is scoped under a subcontract and is assigned the NAICS code 541512, indicating a focus on computer systems design and related services. Performance is tied to the location of New Cumberland with ZIP code 17070-5002, and the contracting activity falls under the Active Devices Division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by August 4, 2026, and participation is conducted via the DIBBS portal using the provided solicitation number.
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging, Marking, and Shipping Compliance ServicesThe contract requires comprehensive packaging, preservation, and marking services fully aligned with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring military-grade compliance for all handled items. Specifically, dry preservation method 10 must be applied to protect equipment from environmental degradation, while unit packaging under Pack Code U ensures items are individually prepared for efficient handling and distribution. All packages must be marked using DoDAAC-based routing protocols to guarantee accurate tracking and delivery through defense logistics networks. The work is tied to a subcontract under the ACTIVE DEVICES DIVISION of the Department of Defense, with performance centered at New Cumberland, Pennsylvania, ZIP 17070-5002. The North American Industry Classification System code 493190 indicates the service falls under Other Support Activities for Transportation, emphasizing logistics and handling specialization rather than manufacturing. Proposals must be submitted by August 4, 2026, with the solicitation open since July 20, 2026, and no set-aside provisions specified for small business or other categories.
Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
Manufacturing of Military-Grade Electrical Connector Body, ReceptacleThe contract requires the manufacture of 18 units of a military-spec electrical connector body, receptacle, identified by Part No. A-A-55463-06 and NSN 5935-01-323-6812, fully compliant with A-A-55463A Revision A, Generation 4, and DLA RA001 specifications. The work must be performed to exacting military standards ensuring reliability and performance under operational conditions, with the finished products destined for use in defense applications. The NAICS code 334417 indicates this falls under the category of Electronic Component and Product Manufacturing, emphasizing precision fabrication and adherence to technical and quality control requirements. The solicitation is classified as a subcontract and was posted on July 20, 2026, with responses due by August 4, 2026. Performance is to occur at the facility located in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contract is managed by the Active Devices Division under the Department of Defense, which oversees procurement for critical military electronics components. The precise location of performance and the strict compliance requirements indicate that the contractor must have the necessary certifications and capabilities to meet defense-grade production and inspection standards. The contract will be administered through the DLA DIBBS system using the referenced solicitation number SPE7M526Q0741.
Electronic Connector Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Small Business Subcontracting and Accelerated Payments AdministrationThe contract requires comprehensive administration of subcontracting activities designated exclusively for small businesses under a Total Small Business Set-Aside, as defined by FAR 19.5, with the NAICS code 541611 for management consulting services. The performance location is situated in Cherry Point, North Carolina, with all subcontracting obligations governed by the Federal Acquisition Regulation, particularly the requirement to implement accelerated payments as specified in FAR 52.232-40. The contractor must systematically track all small business subcontractors, maintain accurate records, and submit mandatory reports through the Electronic Subcontracting Reporting System to ensure full compliance with federal guidelines. The contract emphasizes strict adherence to payment timelines for small business subcontractors, with the expectation that payments are accelerated in accordance with the specified regulation. The effort is managed under the Department of Defense and administered by the Active Devices Division, with a response deadline of July 31, 2026, following the posting date of July 20, 2026. No solicitation number is listed, reinforcing the focus on the regulatory structure and administrative rigor required to uphold small business participation and payment integrity. The place of performance and the nature of the work indicate a high degree of coordination with government systems and compliance reporting under defense contracting protocols.
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541511
New
DIBBS
Prohibited Telecommunications Equipment Screening and ReplacementThis contract requires the identification and replacement of prohibited telecommunications equipment sourced from vendors such as Huawei and ZTE across IT assets, in full compliance with DFARS 252.204-7018. The work involves conducting thorough audits to detect any covered telecommunications equipment or services that are deemed a security risk, followed by the timely removal and substitution with approved alternatives to ensure system integrity and regulatory adherence. The project must be executed within the designated place of performance at Cherry Point, North Carolina, with strict attention to timelines and audit accuracy to meet federal defense specifications. The opportunity is structured as a small business set-aside under the SBA’s Total Small Business Set-Aside category, exclusively available to small businesses as defined by FAR 19.5, and is classified under NAICS code 541511 for computer systems design services. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and is issued under the Department of Defense through the Active Devices Division. Contractors must be prepared to deliver compliant solutions under subcontract terms and demonstrate established processes for equipment verification, documentation, and secure logistics during the replacement phase.
Custom Computer Programming Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CMMC ImplementationThis contract requires the implementation of NIST SP 800-171 cybersecurity controls to achieve compliance with CMMC Level 2 standards, focused on system hardening, robust access controls, and comprehensive audit logging across all relevant systems and environments. The effort is scoped to ensure the contractor meets the Department of Defense’s cybersecurity requirements for handling controlled unclassified information, with the ultimate goal of passing a formal CMMC Level 2 assessment. Work must be performed at Cherry Point, North Carolina, with all security measures aligned to federal guidelines and tailored to the specific infrastructure and operational context of the Active Devices Division. The contract is structured as a small business set-aside under SBA requirements, exclusively available to businesses classified as total small businesses as defined by FAR 19.5, and falls under NAICS code 541512 for computer systems design services. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and all proposals must demonstrate clear expertise in NIST framework application, CMMC readiness, and defense contracting compliance. The successful vendor will be responsible for documenting control implementation, maintaining audit trails, and providing evidence of continuous compliance, all in support of securing sensitive defense-related systems at the specified location.
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Labeling and Safety ComplianceThe contract requires the provision of hazard warning labels and safety data sheets that fully comply with OSHA’s Hazard Communication Standard and DFARS clause 252.223-7001, ensuring proper identification and communication of chemical hazards across military supply chains. All labeling must adhere to MIL-STD-129 specifications for uniformity and durability, and the vendor must implement a robust system for managing and maintaining up-to-date safety data sheets for all hazardous materials. This subcontract is set aside entirely for small businesses as defined by the SBA and is categorized under NAICS code 541690 for other scientific and technical consulting services. The performance location is designated as Cherry Point, North Carolina, with a response deadline of July 31, 2026, and the solicitation is issued by the Department of Defense’s Active Devices Division through the DIBBS platform.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Domestic Freight & Logistics (U.S.-Flag Vessel Requirement)The contract requires the transportation of goods via U.S.-flag vessels for overseas shipments, with a clear mandate to use American-owned and operated vessels for international freight. For domestic logistics, the contractor must coordinate the movement of cargo to DLA Distribution in Columbus, Ohio, ensuring timely and secure delivery to the specified zip code 43213. The scope encompasses end-to-end logistics planning and execution, including handling, scheduling, and compliance with U.S. maritime regulations for overseas segments. All work must align with the North American Industry Classification System code 484220, which pertains to general freight trucking, and is structured as a subcontract under the Department of Defense’s Active Devices Division. Responses are due by July 31, 2026, following a posting date of July 20, 2026, and the solicitation is accessible through the DIBBS platform for potential bidders.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Compliance & Cybersecurity SupportThe contract seeks advisory or audit support to ensure adherence to critical cybersecurity standards including DFARS 252.204-7012, NIST SP 800-171, and CMMC Level 2 requirements. The primary focus is on facilitating a thorough self-assessment process and generating comprehensive documentation to demonstrate compliance with these defense-related cybersecurity frameworks. This support is essential for organizations handling controlled unclassified information and must be delivered with precision to meet federal contractual obligations. The work is classified as a subcontract under NAICS code 541611, with performance centered in Columbus, Ohio, 43213. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, under the purview of the Department of Defense’s Active Devices Division. No specific set-aside type is indicated, and the contract aims to secure expert services that will directly contribute to the contractor’s ability to validate and maintain cybersecurity compliance in alignment with Department of Defense mandates.
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326199
New
DIBBS
ESD/EMI Protective Packaging SupplyThe contract calls for the supply of electrostatic discharge and electromagnetic interference protective packaging materials that meet the stringent requirements of MIL-PRF-81705, specifically including Type I and Type III barrier materials. All materials must be sourced exclusively from manufacturers listed on the Qualified Products List QPL-81705 to ensure compliance with military-grade standards for ESD and EMI protection. The packaging is intended for use in sensitive electronic applications where environmental and static control are critical to mission success. This subcontract is issued by the Active Devices Division under the Department of Defense, with performance required at a location in Columbus, Ohio with the zip code 43213. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. The North American Industry Classification System code 326199 indicates the focus is on other rubber product manufacturing, aligning with the specialized nature of the protective packaging materials. There is no set-aside designation specified, and all qualified vendors meeting the technical and sourcing requirements are eligible to respond.
All Other Plastics Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
Supply of Linear Microcircuit (NSN: 5962011999837)The contract calls for the procurement and delivery of twenty units of a linear microcircuit identified by National Stock Number 5962011999837, which must fully comply with applicable military specifications. Each unit requires proper packaging and labeling to meet defense logistics standards, ensuring traceability and readiness for military use. The finished product must be shipped to DLA Distribution in Columbus, Ohio, with the delivery address designated by the zip code 43213. This is a subcontract under the Department of Defense’s Active Devices Division, classified under NAICS code 334418 for other semiconductor and related device manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, leaving a narrow window for qualification and proposal submission. While no set-aside designation or point of contact details are provided, the requirement is specific, time-sensitive, and aligned with defense supply chain protocols, emphasizing strict adherence to technical and logistical directives for military-grade electronics.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541330
New
DIBBS
Inspection and Quality Assurance Services (MIL-STD-1916 Compliance)The contract requires the execution of final inspection services for capacitors under strict quality standards, specifically employing MIL-STD-1916 or ASQ H1331 sampling plans to ensure zero non-conformances and full compliance with accepted quality levels for critical, major, and minor defects. The work must be performed to exacting military and industry benchmarks, emphasizing the absolute absence of defects in every inspected unit, making precision and rigorous quality control paramount. The inspection process is non-negotiable in its requirements, leaving no room for tolerance in adherence to the specified standards. The contract is a subcontract under the Department of Defense’s Active Devices Division, with performance expected at a designated location in New Cumberland, Pennsylvania, ZIP code 17070-5002. Issued under NAICS code 541330 for Engineering Services, the opportunity is open for response until July 31, 2026, with posting dated July 20, 2026. All submissions must meet the demanding compliance criteria without deviation, and bidders must be fully prepared to deliver flawless inspection outcomes aligned with defense-quality expectations.
Engineering Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details