CONNECTOR, PLUG, ELECTRI

CONNECTOR,PLUG,ELECTRICAL
CONNECTOR,PLUG,ELECTRICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ012: QUALIFIED PRODUCTS LIST (QPL) CONNECTOR ASSEMBLIES AND QPL
ELECTRICAL CONTACTS. THIS IS A QUALIFIED ITEM. QUALIFICATION
REQUIREMENTS IN PROCUREMENT NOTE H01 "QUALIFIED PRODUCTS LIST (QPL) FOR
FEDERAL STOCK CLASS (FSC) 5935 CONNECTOR ASSEMBLIES AND CONTACTS" APPLY.
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
Material manufactured by Amphenol CAGE (77820), Matrix CAGE (14283), or Pyle National CAGE (49367) with lot date codes from July 2006 through June 2016 is not acceptable whether offered as new material or surplus.
Traceability documents may be required by the Government before or after award to establish manufacturing dates and sources.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
SPE7M0-27-T-1204
SECTION B
ONLY ITEMS.
THIS NSN IS LISTED AS A PRIMARY QPL OR QML THEREFORE
THE QUALIFIED PRODUCTS LIST OR QUALIFIED MANUFACTURERS
LIST IS APPLICABLE.
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-38999/26G(4) REVISION NR G DTD 08/11/2022 PART PIECE NUMBER: D38999/26KD97PN
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-38999N(1) REVISION NR N DTD 09/14/2023 PART PIECE NUMBER: D38999/26KD97PN
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019084799 0001 EA 12.000
NSN/MATERIAL:5935016150876
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
SPE7M0-27-T-1204
SECTION B
PR: 7019084799 PRLI: 0001 CONT’D
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
MARKFOR
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
M/F: (TCN) W31G1Y631000HG
RDD:
PROJ: TP 1
SUPP ADD: W31G1Y SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2L FC: VE
Need Ship Date:00/00/0000 Original Required Delivery Date:11/12/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7019069107 0001 EA 8.000
NSN/MATERIAL:5935016150876
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
SPE7M0-27-T-1204
SECTION B
PR: 7019069107 PRLI: 0001 CONT’D
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
MARKFOR
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
M/F: (TCN) W31G1Y6309017R
RDD: 314
PROJ: TP 1
SUPP ADD: W31G1Y SIG: A
SPE7M0-27-T-1204
SECTION B
PR: 7019069107 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2L FC: VE
Need Ship Date:00/00/0000 Original Required Delivery Date:11/10/2026
SPE7M0-27-T-1204 NSN/Part Number: 5935-01-615-0876 Quantity: 12 EA Purchase Request: 7019084799QTY: 12 Delivery: 5 days ADO