CONNECTOR, PLUG, ELECTRI
Active
SPE7M5-26-T-329HFederalResponse Deadline
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
Show more
The contract specifies the procurement of a plug electrical connector identified by NSN 5935012971938 and part number MS27467E23B21P, complying with MIL-DTL-38999N and MS27467M standards, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements. The item is subject to strict qualification controls as a Qualified Products List item, and manufacturing by Bendix Corporation with lot date codes from January 1977 through February 1984 is explicitly prohibited. The use of any Class I ozone-depleting substances in any manufacturing or processing stage is forbidden unless prior written approval from the contracting officer is obtained, with no exceptions for commercial items or part-numbered-only components. Removable crimp-type contacts must not be installed in the connector insert; instead, they must be securely packed in a noncorrosive rigid container and enclosed within the unit container, with all preservation and packaging conforming to MIL-DTL-55330. Sampling for quality compliance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and inspection and acceptance occur at the destination. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with no special marking required. Shipment must be made via the fastest traceable means to the Naval Special Warfare Group 8 in Pearl City, HI, under RDD 777, explicitly prohibiting parcel post. Two line items are included: four units at $4.00 each and four units at $2.00 each, with a total delivery window of 20 days from the contract date and a required delivery date of July 13, 2026. Full and open competition applies, and serial numbers, if needed, must be requested via email with a PDF of the contract and drawing details for verification.
General Info
Procure 8 MS27467E23B21P connectors, compliant with MIL-DTL-38999N, no ozone-depleting substances, shipped to Pearl City HI by July 13, 2026.
Agency
Department Of Defense → ACTIVE DEVICES DIVISIONView Agency
NAICS
334417 - Electronic Connector ManufacturingView NAICS
Place of Performance
2001 VICTOR WHARF ACCESS BLDG 987, PEARL CITY, HI, 96782, USSet-Aside
NONE
Timeline
PhaseSolicitation
Response Deadline
Organization & Contact Information
Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Office AddressUS
Contacts
Full Description
Show more
CONNECTOR,PLUG,ELECTRICAL
CONNECTOR,PLUG,ELEC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ012: QUALIFIED PRODUCTS LIST (QPL) CONNECTOR ASSEMBLIES AND QPL
ELECTRICAL CONTACTS. THIS IS A QUALIFIED ITEM. QUALIFICATION
REQUIREMENTS IN PROCUREMENT NOTE H01 "QUALIFIED PRODUCTS LIST (QPL) FOR
FEDERAL STOCK CLASS (FSC) 5935 CONNECTOR ASSEMBLIES AND CONTACTS" APPLY.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MATERIAL MANUFACTURED BY BENDIX CORPORATION
CAGE 77820, WITH LOT DATE CODES FROM JANUARY
1977 THROUGH FEBRUARY 1984 ARE NOT ACCEPTABLE.
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
FULL AND OPEN COMPETITION APPLIES.
Serial numbers, if required by drawing, can be obtained via e-mail at nswcpcdsdvcm@navy.mil. When requesting serial numbers the contractor shall attach in the email a PDF copy of the government contract form which shows the drawing and revision number. The Naval Surface Warfare Center, Panama City Division will verify the vendor is building to the latest revision of the drawing.
SPE7M5-26-T-329H
SECTION B
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev A Gen 1 IAW BASIC SPEC NR MS27467M(1) NOT 2 REVISION NR M DTD 08/27/2024 PART PIECE NUMBER: MS27467E23B21P
TDP Rev A Gen 1 IAW REFERENCE QAP 53711 SDV-SPARES-CDRL REVISION NR DTD 12/16/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-38999N(1) REVISION NR N DTD 09/14/2023 PART PIECE NUMBER: MS27467E23B21P
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017493452 0001 EA 4.000
NSN/MATERIAL:5935012971938
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE7M5-26-T-329H
SECTION B
PR: 7017493452 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
CONNECTORS WITH REMOVABLE CONTACTS.
..
REMOVABLE CRIMP TYPE CONTACTS SHALL "NOT" BE
INSTALLED IN THE CONNECTOR INSERT, BUT SHALL BE
PLACED IN A CLOSE FITTING NONCORROSIVE RIGID
CONTAINER, SUCH AS A VIAL OR BOX, AND ENCLOSED
WITHIN THE UNIT CONTAINER. ANY SPARE CONTACTS
FURNISHED SHALL ALSO BE WITHIN THIS CONTAINER.
PRESERVATION AND PACKAGING SHALL BE IAW THE
LATEST REVISION OF MILITARY SPECIFICATION:
MIL-DTL-55330, FOR CONNECTORS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
R55457
NAVAL SPECIAL WARFARE GROUP 8
LOGISTICS SUPPORT UNIT 8
2001 VICTOR WHARF ACCESS BLDG 987
PEARL CITY HI 96782
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R55457
NAVAL SPECIAL WARFARE GROUP 8
LOGISTICS SUPPORT UNIT 8
2001 VICTOR WHARF ACCESS BLDG 987
PEARL CITY HI 96782
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R5545761891315
RDD: 777
PROJ: EE5 TP 2
SUPP ADD: YSTOCK SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A4A DIST: X9B ADV: FC: CR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/13/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M5-26-T-329H
SECTION B
PR: 7017493451 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017493451 0001 EA 2.000
NSN/MATERIAL:5935012971938
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
CONNECTORS WITH REMOVABLE CONTACTS.
.. REMOVABLE CRIMP TYPE CONTACTS SHALL "NOT" BE INSTALLED IN THE CONNECTOR INSERT, BUT SHALL BE PLACED IN A CLOSE FITTING NONCORROSIVE RIGID CONTAINER, SUCH AS A VIAL OR BOX, AND ENCLOSED WITHIN THE UNIT CONTAINER. ANY SPARE CONTACTS FURNISHED SHALL ALSO BE WITHIN THIS CONTAINER. PRESERVATION AND PACKAGING SHALL BE IAW THE LATEST REVISION OF MILITARY SPECIFICATION: MIL-DTL-55330, FOR CONNECTORS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
CONNECTORS WITH REMOVABLE CONTACTS.
.. REMOVABLE CRIMP TYPE CONTACTS SHALL "NOT" BE INSTALLED IN THE CONNECTOR INSERT, BUT SHALL BE PLACED IN A CLOSE FITTING NONCORROSIVE RIGID CONTAINER, SUCH AS A VIAL OR BOX, AND ENCLOSED WITHIN THE UNIT CONTAINER. ANY SPARE CONTACTS FURNISHED SHALL ALSO BE WITHIN THIS CONTAINER. PRESERVATION AND PACKAGING SHALL BE IAW THE
SPE7M5-26-T-329H
SECTION B
PR: 7017493451 PRLI: 0001 CONT’D
LATEST REVISION OF MILITARY SPECIFICATION:
MIL-DTL-55330, FOR CONNECTORS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
R55457
NAVAL SPECIAL WARFARE GROUP 8
LOGISTICS SUPPORT UNIT 8
2001 VICTOR WHARF ACCESS BLDG 987
PEARL CITY HI 96782
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R55457
NAVAL SPECIAL WARFARE GROUP 8
LOGISTICS SUPPORT UNIT 8
2001 VICTOR WHARF ACCESS BLDG 987
PEARL CITY HI 96782
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R554576177SD67
RDD: 777
PROJ: Z2P TP 2
SUPP ADD: YSOE01 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A4A DIST: X9B ADV: FC: CR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/13/2026
SPE7M5-26-T-329H NSN/Part Number: 5935-01-297-1938 Quantity: 4 EA Purchase Request: 7017493452QTY: 4 Delivery: 20 days ADO
CONNECTOR,PLUG,ELEC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ012: QUALIFIED PRODUCTS LIST (QPL) CONNECTOR ASSEMBLIES AND QPL
ELECTRICAL CONTACTS. THIS IS A QUALIFIED ITEM. QUALIFICATION
REQUIREMENTS IN PROCUREMENT NOTE H01 "QUALIFIED PRODUCTS LIST (QPL) FOR
FEDERAL STOCK CLASS (FSC) 5935 CONNECTOR ASSEMBLIES AND CONTACTS" APPLY.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MATERIAL MANUFACTURED BY BENDIX CORPORATION
CAGE 77820, WITH LOT DATE CODES FROM JANUARY
1977 THROUGH FEBRUARY 1984 ARE NOT ACCEPTABLE.
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
FULL AND OPEN COMPETITION APPLIES.
Serial numbers, if required by drawing, can be obtained via e-mail at nswcpcdsdvcm@navy.mil. When requesting serial numbers the contractor shall attach in the email a PDF copy of the government contract form which shows the drawing and revision number. The Naval Surface Warfare Center, Panama City Division will verify the vendor is building to the latest revision of the drawing.
SPE7M5-26-T-329H
SECTION B
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev A Gen 1 IAW BASIC SPEC NR MS27467M(1) NOT 2 REVISION NR M DTD 08/27/2024 PART PIECE NUMBER: MS27467E23B21P
TDP Rev A Gen 1 IAW REFERENCE QAP 53711 SDV-SPARES-CDRL REVISION NR DTD 12/16/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-38999N(1) REVISION NR N DTD 09/14/2023 PART PIECE NUMBER: MS27467E23B21P
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017493452 0001 EA 4.000
NSN/MATERIAL:5935012971938
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE7M5-26-T-329H
SECTION B
PR: 7017493452 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
CONNECTORS WITH REMOVABLE CONTACTS.
..
REMOVABLE CRIMP TYPE CONTACTS SHALL "NOT" BE
INSTALLED IN THE CONNECTOR INSERT, BUT SHALL BE
PLACED IN A CLOSE FITTING NONCORROSIVE RIGID
CONTAINER, SUCH AS A VIAL OR BOX, AND ENCLOSED
WITHIN THE UNIT CONTAINER. ANY SPARE CONTACTS
FURNISHED SHALL ALSO BE WITHIN THIS CONTAINER.
PRESERVATION AND PACKAGING SHALL BE IAW THE
LATEST REVISION OF MILITARY SPECIFICATION:
MIL-DTL-55330, FOR CONNECTORS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
R55457
NAVAL SPECIAL WARFARE GROUP 8
LOGISTICS SUPPORT UNIT 8
2001 VICTOR WHARF ACCESS BLDG 987
PEARL CITY HI 96782
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R55457
NAVAL SPECIAL WARFARE GROUP 8
LOGISTICS SUPPORT UNIT 8
2001 VICTOR WHARF ACCESS BLDG 987
PEARL CITY HI 96782
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R5545761891315
RDD: 777
PROJ: EE5 TP 2
SUPP ADD: YSTOCK SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A4A DIST: X9B ADV: FC: CR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/13/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M5-26-T-329H
SECTION B
PR: 7017493451 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017493451 0001 EA 2.000
NSN/MATERIAL:5935012971938
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
CONNECTORS WITH REMOVABLE CONTACTS.
.. REMOVABLE CRIMP TYPE CONTACTS SHALL "NOT" BE INSTALLED IN THE CONNECTOR INSERT, BUT SHALL BE PLACED IN A CLOSE FITTING NONCORROSIVE RIGID CONTAINER, SUCH AS A VIAL OR BOX, AND ENCLOSED WITHIN THE UNIT CONTAINER. ANY SPARE CONTACTS FURNISHED SHALL ALSO BE WITHIN THIS CONTAINER. PRESERVATION AND PACKAGING SHALL BE IAW THE LATEST REVISION OF MILITARY SPECIFICATION: MIL-DTL-55330, FOR CONNECTORS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
CONNECTORS WITH REMOVABLE CONTACTS.
.. REMOVABLE CRIMP TYPE CONTACTS SHALL "NOT" BE INSTALLED IN THE CONNECTOR INSERT, BUT SHALL BE PLACED IN A CLOSE FITTING NONCORROSIVE RIGID CONTAINER, SUCH AS A VIAL OR BOX, AND ENCLOSED WITHIN THE UNIT CONTAINER. ANY SPARE CONTACTS FURNISHED SHALL ALSO BE WITHIN THIS CONTAINER. PRESERVATION AND PACKAGING SHALL BE IAW THE
SPE7M5-26-T-329H
SECTION B
PR: 7017493451 PRLI: 0001 CONT’D
LATEST REVISION OF MILITARY SPECIFICATION:
MIL-DTL-55330, FOR CONNECTORS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
R55457
NAVAL SPECIAL WARFARE GROUP 8
LOGISTICS SUPPORT UNIT 8
2001 VICTOR WHARF ACCESS BLDG 987
PEARL CITY HI 96782
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R55457
NAVAL SPECIAL WARFARE GROUP 8
LOGISTICS SUPPORT UNIT 8
2001 VICTOR WHARF ACCESS BLDG 987
PEARL CITY HI 96782
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R554576177SD67
RDD: 777
PROJ: Z2P TP 2
SUPP ADD: YSOE01 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A4A DIST: X9B ADV: FC: CR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/13/2026
SPE7M5-26-T-329H NSN/Part Number: 5935-01-297-1938 Quantity: 4 EA Purchase Request: 7017493452QTY: 4 Delivery: 20 days ADO