Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CONNECTOR, PLUG, ELECTRI

Active
SPE7M5-26-Q-0791Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 195 electrical plug connectors with NSN 5935-01-008-2404 under solicitation SPE7M5-26-Q-0791, issued by the Department of Defense’s Active Devices Division. Delivery is required within 145 days after award, and quotes must derive from approved sources and materials explicitly listed on the referenced drawing, ensuring strict compliance with technical and quality standards incorporated from the DLA Master List of Technical and Quality Requirements. The solicitation closed on August 7, 2026, with performance to be conducted at Robins AFB, Georgia, and primary point of contact is Corey Carter. No ozone-depleting chemicals may be used in any component, and this prohibition overrides any conflicting specification requirements without exempting product performance obligations. Any substitute chemicals require prior approval unless already authorized by the specification. Configuration changes must be managed through formal engineering change proposals or variance requests, and government identification must be removed from rejected supplies. Packaging must comply with DLA procurement standards, and the acquisition falls under NAICS code 332112.

General Info

Procure 195 electrical plug connectors per NSN 5935-01-008-2404, delivery in 145 days, no ozone-depleting chemicals, Robins AFB, Georgia.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Corey Carter
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTOR,PLUG,ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
"QUOTES MUST BE BASED UPON FURNISHING AN ITEM
MANUFACTURED BY AN APPROVED SOURCE AND FROM AN
APPROVED MATERIAL CITED ON THE DRAWING
REFERENCED BELOW. THE CITED DRAWING SPECIFIES
WHICH MATERIALS ARE ACCEPTABLE AND PROVIDES NSN/Part Number: 5935-01-008-2404 Quantity: 195 EA Purchase Request: 7017440553QTY: 195 Delivery: 145 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332112
New
DIBBS
Precision Metal Shim ManufacturingThe contract requires the manufacture of 48 precision-engineered shim components with part number 212-011-731-101 and NSN 5365014936230, aligned with specifications set by the Defense Logistics Agency and Sikorsky. Each component must be produced to exacting tolerances and include proper packaging and labeling as mandated by the requirements. The work falls under NAICS code 332112, indicating it is within the metal forging and stamping industry, and is classified as a subcontract opportunity issued by the ASC Supplier Operations OEM Division under the Department of Defense. The solicitation was posted on July 28, 2026, with a firm response deadline of August 5, 2026, and all performance must meet the technical and compliance standards established by the government. The place of performance and point of contact details are not specified, but the official solicitation can be accessed via the DIBBS platform.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-10DR
The contract pertains to the procurement of 231 machine bolts identified by NSN 5306-00-785-1102 and part number 9411631, supplied to meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The items are designated as critical application components for General Motors Corp and Rolls-Royce Solutions America Inc, requiring strict adherence to MIL-STD-1916 or ASQ H1331 sampling protocols with zero non-conformances permitted unless otherwise stated. Attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required, and palletization must conform to DLA packaging requirements. The items must be delivered FOB origin within 164 days, with no variance allowed in quantity, inspected and accepted at destination. The delivery address is DLA Distribution Depot Hill at Hill AFB, Utah, with freight shipping instructions referencing DLAD procedural notes C19 and C20. The original required delivery date is January 27, 2027, with a need ship date of January 17, 2027. The contract, issued under solicitation SPE4A6-26-T-10DR, was posted on July 28, 2026, with responses due by August 5, 2026. It falls under NAICS code 332112 and is managed by the Department of Defense’s ASC Commodities Division. The unit of issue is each, with a total price of $231.00 at $1.00 per unit. Technical compliance, packaging, marking, and delivery protocols are binding and must align with all referenced DLA and military standards without exception.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-07ZR
The contract solicitation SPE4A6-26-T-07ZR seeks the procurement of 2,454 machined bolts, NSN 5306001775559, identified as MS9530-10, manufactured to Technical Data Package Rev A Gen 1 in compliance with SAE AS9530B Revision B dated 08/01/2015, SAE AS7452 Revision D dated 07/01/2021, and Quality Assurance Procedure QAP 13873 Revision D dated 03/12/2019. The item is designated a critical application requiring full traceability, inspection certification, and adherence to stringent military and aerospace standards. Delivery is required FOB Origin to Warner Robins Air Force Base, Georgia, with a 293-day delivery window following the need ship date of May 18, 2027, and an original delivery deadline of November 20, 2027. Quantity is fixed at 2,454 units with zero variance allowed, and inspection and acceptance occur at the origin. Packaging must adhere to ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence, and all packaging and labeling must follow MIL-STD-129 including 2D barcode requirements and proper unit of issue and quantity per unit pack as specified. Palletization must conform to DLA RP001 standards. All hazardous materials must be labeled per OSHA Hazard Communication Standard and require submission of Safety Data Sheets; federal exemptions apply only if explicitly identified. The contract mandates compliance with multiple FAR clauses including Equal Opportunity for Workers with Disabilities, Combating Trafficking in Persons, Employment Eligibility Verification, Sustainable Products, Hazardous Materials Identification, Safeguarding of Contractor Information Systems, and Changes – Fixed Price, all subject to Deviation 2026-00038. Authorization and Consent clauses include both Alternate I and Alternate II versions. Invoicing must be conducted exclusively through Wide Area WorkFlow, and the offeror must provide a Unique Entity ID and CAGE Code, especially if offering under small business set-asides such as HUBZone, 8(a), SDVOSB, WOSB, or EDWOSB. Offerors must affirm their size status and disclose joint venture partners’ UEIs if applicable, and
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332112
New
DIBBS
HEAT INTERCHANGER, R
Solicitation # SPE8E8-26-T-4870
The contract is for one Heat Interchanger, R, with NSN 4130-01-612-2728 and part number 026-4376-000, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. Delivery is required within 20 days to the USS RONALD REAGAN CVN 76 at FPO AP 96616, with delivery terms FOB destination and no tolerance for quantity variance. All items must comply with DLA packaging requirements as defined in RP001 and marking standards per MIL-STD-129, using packaging methods specified under MIL-STD-2073-1E, including preservation, packaging, and container codes. The item must be shipped in a single unit with intermediate containment labeled D3 and packaged without special marking. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or authorized chemical reagents, and any portable devices containing mercury must include shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements identified by R or I numbers, with compliance determined by the master list revision effective on the solicitation issuance date. Transportation and shipping procedures must adhere to DLAD Proc Notes C19 and C20, and the purchase request number is 7017643732 under contract SPE8E8-26-T-4870. Inspection and acceptance occur at the destination, and the required delivery date is July 24, 2026.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-83M0
The contract pertains to the procurement of 706 units of a machine bolt identified by NSN 5306-99-138-3093 and part number 7980-1302-017, with deliveries required within 116 days under FOB origin terms. The item is designated as a critical application component, subject to stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items marked and labeled accordingly, and palletization following DLA specifications. Sampling for quality assurance is to be conducted using MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with acceptance criteria requiring zero non-conformances unless otherwise specified. Attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively, or equivalent AQLs, and unspecifed attributes default to major. The contract mandates adherence to documentation standards including source approval requirements and physical identification markings, with all components sourced from approved suppliers including Goodrich Control Systems Ltd, Safran Electrical & Power UK Ltd, and Advanced Logistics for Aerospace (UK). Delivery is directed to DLA Distribution at the New Cumberland, Pennsylvania facility, with no quantity variance allowed and inspection and acceptance occurring at destination. The solicitation was issued on July 28, 2026, with responses due by July 31, 2026, under contract number SPE4A6-26-T-83M0, procured by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A7-26-T-583F
The contract pertains to the procurement of 500 machine bolts identified by NSN 5306-00-054-1438 under solicitation SPE4A7-26-T-583F, with delivery required within 158 days after receipt of order by June 1, 2026. The item is classified as a commercial item and must be manufactured in accordance with the current revision of SAE AS9566 Revision B dated July 1, 2018, with prior revisions accepted for items produced before the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions including RQ006 for quality conformance inspection, RQ009 for inspection and acceptance at origin, RQ011 for removal of government identification from non-accepted supplies, and RQ017 mandating physical identification markings on bare items consistent with MIL-STD-130N paragraph 4.1.b(2). Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with hardware except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and have a secondary containment boundary per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E using preservation method 10, green bag wrapping, no cushioning material, unit containers marked BL, intermediate containers E5, and a pack code of U. Palletization adheres to DLA Packaging Requirements for Procurement (RP001). Marking is governed by MIL-STD-129, with no special marking required. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes must be evaluated at verification levels VII, IV, and II respectively, or corresponding AQLs of 0.1, 1.0, and 4.0. Inspection and acceptance occur at origin under contractor responsibility, with Certificate of Quality Compliance required. The contract prohibits hexavalent chromium and requires hazardous material labeling in compliance with 29 CFR 1910.1200. It includes compliance clauses
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332112
New
DIBBS
CONDENSER, REFRIGERA
Solicitation # SPE8E8-26-T-4891
The contract pertains to the procurement of one condenser for refrigeration equipment with NSN 4130-01-583-8050 and part number 891-14230, issued under solicitation SPE8E8-26-T-4891 by the Defense Logistics Agency. The item must be delivered within five days to the Sierra Army Depot in Herlong, California, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129 as dictated by the DLA Master List of Technical and Quality Requirements, which takes precedence over any general standards. The unit of issue is each, and palletization must adhere to DLA packaging directives. The shipment must use the fastest traceable means, excluding parcel post, and must be marked with the designated government information including the mail forward code, project identifier, and required delivery date of November 24, 2025. The contract references strict government control over identification, handling, and documentation, with specific instructions for labeling and shipping to the designated depot facility.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332112
New
Federal
Precision Aerospace Casting (Aluminum)The contract entails the precision manufacturing of a control exhaust nozzle using aluminum casting methods, with full responsibility for mold design, casting, finishing, and dimensional verification to meet the specifications outlined in Source Control Drawing 4083931. All work must adhere to stringent aerospace quality standards, ensuring the final component meets exacting functional and dimensional tolerances required for critical aerospace applications. The scope covers the entire production lifecycle from initial tooling through final inspection, with no room for deviation from the approved technical documentation. This is a subcontract issued under the NAICS code 332112 for aluminum foundry operations, sponsored by the Department of Defense through the FA8121 Afsc Pzaaa office. The solicitation was posted on July 28, 2026, with a firm response deadline of August 12, 2026, at 5:00 PM, leaving a limited window for qualified vendors to submit proposals. Performance location details are unspecified, and no set-aside designation or point of contact information is provided, suggesting that eligible contractors must independently verify all operational and compliance requirements prior to bidding. All work must be completed in accordance with Defense Department procurement protocols and aerospace industry best practices.
FA8121 Afsc Pzaaa

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-03RG
The contract is for the procurement of 6,106 machine bolts with NSN 5306-00-097-8968 under solicitation SPE4A6-26-T-03RG, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 158 days after order award, with responses due by July 30, 2026. The item falls under NAICS code 332112 and is subject to a comprehensive set of technical, quality, and regulatory requirements. These include compliance with DLA’s Master List of Technical and Quality Requirements identified by R and I numbers, such as packaging standards, inspection protocols at origin, removal of government identification from non-accepted items, and cybersecurity certification at CMMC Level 2. The technical data associated with this item is export-controlled under ITAR or EAR, restricting its disclosure to foreign persons regardless of location, and access is limited to contractors with approved JCP certification, completed DOD export control training, and formal DLA authorization. Additionally, the contract mandates tailored higher-level quality requirements for both manufacturers and non-manufacturers, requires physical marking of the bare item, and applies Covered Defense Information protocols under DFARS 252.225-7048. Performance is to be delivered to New Cumberland, PA, with Duane Watkins as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in about 14 hours
View Details
NAICS: 332112
New
DIBBS
BEAM, ACCESS DOOR
Solicitation # SPE7L3-26-T-135A
The contract pertains to the procurement of three BEAM ACCESS DOOR units with part number 12488266 under solicitation SPE7L3-26-T-135A, issued by the Department of Defense through DLA for the U.S. Army. Delivery is required within ten days of award, with shipment FOB origin and no variance allowed in quantity. The item must comply with MIL-STD-130N for identification marking and MIL-STD-129 for packaging, adhering to special packaging instructions AK15368022 Rev A and special marking requirements including “ARROW UP OPEN THIS SIDE” and mechanical handling directives. Preservation and packaging are strictly prohibited from containing mercury or mercury compounds. The product is defined by multiple Army drawings and referenced technical data packages, with chemical agent resistant coatings (CARC) mandated per DCSC Drawing 16236 CS-2300-0001 superseding any conflicting finish requirements. Ozone-depleting chemicals are forbidden, and substitute chemicals require prior approval. The supplier must be a CMMC Level 2 Certified Third-Party Assessment Organization, and all configuration changes require formal engineering change proposals. Quality compliance is governed by Certificate of Conformance procedures unless waived by a quality assurance letter. The item is sourced under full and open competition, with performance directed to Zaczernie, Poland, under RDD/ANMCS shipping protocols and specific transportation guidance outlined in DLAD procedural notes. The required delivery date is July 22, 2026, with a solicitation response deadline of August 7, 2026, and point of contact is Lee Miller.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332112
New
DIBBS
STARTER, MOTOR
Solicitation # SPE7M0-26-T-008W
The contract solicits a single motor starter with NSN 6110-01-137-1923 under a Total Small Business Set-Aside, requiring offerors to be registered in the System for Award Management and certified as small businesses under NAICS code 332112. The item must be delivered within five days of award to FPO AP 96675, shipped FOB Origin via the fastest traceable means, with vessel transport subject to DLA procedural notes C19 and C20. Technical and quality requirements are defined by the DLA Master List of Technical and Quality Requirements, with packaging and marking fully compliant with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods and unit container standards. Sampling for acceptance must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in any sampled lot unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may be used only for determining sample size, not acceptance criteria. Mercury or mercury-containing compounds are prohibited except in specified exceptions such as batteries, fluorescent lamps, and certain instruments, with portable devices requiring double containment per NAVSEA 5100-003D. Hazardous materials must be labeled in accordance with 29 CFR 1910.1200 and MIL-STD-129, and the contract includes mandatory clauses on cyber security, whistleblower rights, trafficking in persons, employment eligibility verification, and prohibitions on covered telecommunications equipment. Payment requires submission of invoice and receiving report through Wide Area Workflow, and the contractor must comply with all applicable DFARS and FAR clauses, including those related to safety notifications, government delay of work, and restrictions on mandatory arbitration. All representations and certifications must be actively maintained in SAM, and updates to size or socioeconomic status are required within 30 days of contract modifications or novation agreements.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in about 14 hours
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M0-26-T-019F
The contract specifies the procurement of a single electrical connector receptacle identified by NSN 5935-01-365-0486 and part number D38999/40WJ24SA, requiring strict compliance with MIL-DTL-38999/40B and MIL-DTL-38999N standards. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific mandates for qualified product list adherence under procurement note H01, prohibitions against ozone-depleting substances in manufacturing unless explicitly approved, and mandatory traceability documentation to verify manufacturing dates and sources. Items produced by Amphenol, Matrix, or Pyle National between July 2006 and June 2016 are explicitly rejected regardless of condition. Sampling must follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stated, and inspection is designated at destination with no variance allowed in quantity. Packaging must adhere to MIL-STD-129 and DLA packaging requirements, with non-hazardous items packaged per ASTM D3951 only if not superseded by higher DLA standards. Delivery is FOB origin with a five-day lead time, and shipping must use the fastest traceable means with parcel post prohibited. The item is to be delivered to Letterkenny Army Depot in Chambersburg, PA, with the required delivery date set for July 24, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M5-26-T-357P
The contract is for the procurement of eight antennas with NSN/part number 5985-99-671-2175 under solicitation SPE7M5-26-T-357P, issued by the Department of Defense’s Active Devices Division. The requirement is governed by DLA packaging and technical quality specifications referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions. Deliverables must be shipped within 225 days after contract award, and the place of performance is designated as New Cumberland, Pennsylvania, with zip code 17070-5002. The offeror must submit a complete data package covering both the approved part and any alternate part, and the government’s identification must be removed from non-accepted supplies. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and the North American Industry Classification System code is 334220. Primary points of contact include Matthew Stanko, reachable via email fmtewiq@dla.mil or phone 3128507245, with additional details accessible through the DIBBS portal linked in the contract data.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 444180
New
DIBBS
RELAY, HYBRID
Solicitation # SPE7M5-26-T-357V
The contract pertains to the procurement of 12 units of a hybrid relay with NSN 5945-01-550-7433 and part number TDH-8050-9002P under solicitation SPE7M5-26-T-357V, with a unit price of $12.00 and total value of $144.00. Delivery is required within 147 days of contract award, with FOB origin terms, and inspection and acceptance occur at the destination. The item must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129, including a special marking code ZZ for additional requirements. Packaging must comply with DLA’s procurement standards and include specific preservation methods, unit containment, and palletization rules. Each unit pack must be labeled in compliance with IPC/JEDEC J-STD-609 for lead content identification, with markings placed as specified. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the shipment must adhere to DLA procedural notes C19 and C20 for transportation and freight. The contractor is required to meet cybersecurity compliance based on CMMC Level 2 self-assessment, and all technical and quality provisions referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements. Covered Defense Information applies, and any non-accepted supplies must have government identification removed. This is a simplified acquisition with the controlling revision of the Master List tied to the solicitation issuance date, and no quantity variance is permitted. The contract was posted July 29, 2026, with a response deadline of August 10, 2026, and the original required delivery date is June 1, 2027, with a need ship date of January 5, 2027. The point of contact is Jeanette Heisey of the Department of Defense’s Active Devices Division, and further details are available through the DIBBS platform.
Other Building Material Dealers

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, MEMORY
Solicitation # SPE7M5-26-T-357S
The contract is for the procurement of a microcircuit, memory item with Federal Supply Class 5962, requiring strict adherence to technical, quality, and packaging standards governed by DLA directives and referenced industry specifications. The item is classified as a qualified item under the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List, with procurement subject to the requirements outlined in Procurement Note M01. Traceability documentation must be maintained and submitted prior to shipment, using DLA Land and Maritime Form 918, with electronic submissions limited to 15 megabytes and named per a strict convention. Shipment authorization is contingent upon written confirmation from the contract administrator, and failure to comply with traceability and documentation rules will result in non-final payment. The item must be marked in accordance with IPC/JEDEC J-STD-609 to indicate lead content and packaged per MIL-STD-2073-1E and MIL-STD-129, with special ESD and EMI protective packaging required using only qualified materials listed on QPL-81705. Cushioning must meet A-A-59136 Class 1, Grade B standards, with a minimum density of 1.7 pounds per cubic foot, and components must be immobilized to prevent lead damage. The item is identified as a critical application with approved source specifications and must not contain intentional mercury or mercury compounds except under specific exceptions. Packaging must include special ESD sensitivity labeling, and all deliveries are FOB origin with inspection and acceptance at destination. The contract requires delivery of four units within 161 days, with a target shipment date of January 19, 2027, to a designated DLA distribution facility in Columbus, Ohio.
Semiconductor and Related Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-26-T-357D
The contract specifies the procurement of one electromagnetic relay, part number 5945013037626, under solicitation SPE7M5-26-T-357D, with a required delivery within 20 days of award. The item must be manufactured in strict compliance with source-controlled drawing NR 1X4F3 and associated technical and quality requirements referenced from the DLA Master List, accessible online. Only vendors with authorized access to the limited rights data may submit quotes, and the product must conform precisely to the drawing specifications regardless of approved part number listings. The relay is designated a critical application item, and its packaging must follow MIL-STD-2073-1E and MIL-STD-129 standards, including special marking code ZZ and palletization per DLA requirements. Each unit package must be marked in accordance with IPC/JEDEC J-STD-609 to clearly identify lead content and other attributes, with markings placed per the standard’s specifications. Delivery is FOB origin to a military facility in Kaohsiung, Taiwan, with no variance allowed in quantity. The contract includes government-only administrative data and directs transportation per DLA procedural notes. The required delivery date is July 31, 2026, with a response deadline of August 10, 2026, and primary point of contact is Jeanette Heisey of the Department of Defense’s Active Devices Division.
Relay and Industrial Control Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
PLATE, RETAINING, ELECTR
Solicitation # SPE7M5-26-Q-0793
The contract specifies the procurement of 136 retaining plates for electrical connectors, identified by NSN 5935-01-413-0422, under solicitation SPE7M5-26-Q-0793. The item is designated as a critical application and qualifies under the Qualified Products List for Federal Stock Class 5935, requiring strict adherence to procurement note H01. Technical compliance is governed by SAE AS85049F Rev F dated 04/01/2021, with reference also made to SAE AS85049/95C Rev C dated 04/01/2011. The item must conform to DLA’s Master List of Technical and Quality Requirements, and all quality verification follows MIL-STD-1916 or ASQ H1331 Table 1 sampling plans with zero non-conformances required unless otherwise stated. Attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. The contract prohibits the intentional use of mercury or mercury-containing compounds except in specific exemptions such as batteries, fluorescent lights, sensors, or weapon systems as defined by NAVSEA, and mandates shockproof design with secondary containment for any portable mercury-containing devices. Use of Class I ozone-depleting substances is strictly forbidden in manufacturing or cleaning unless written approval is obtained from the contracting officer. Packaging must comply with MIL-STD-2073-1E, using preservative methods including drying, vacuum sealing, and appropriate wrapping materials, with marking requirements aligned to MIL-STD-129 and no special markings applied. Delivery is FOB origin with a firm fixed price and zero tolerance for quantity variance, with inspection and acceptance occurring at destination. Delivery must be completed within 90 days after award date, and all shipments shall be directed to DLA Distribution Cherry Point, North Carolina. The item is part of a federal procurement under NAICS code 334417 with a specified need date of November 20, 2026.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334220
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE7M5-26-T-357J
This contract specifies the procurement of an adapter connector under solicitation SPE7M5-26-T-357J, with a requirement for two units to be delivered within twenty days FOB destination. The item is identified as a commercial off-the-shelf product with NSN 5935010929429 and is subject to strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The delivery address is a U.S. Navy vessel shipment to USS DECATUR DDG 73, and transportation logistics must follow DLAD procedures C19 and C20. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware except in limited, approved applications such as batteries, fluorescent lights, and specified instrument controls, with additional containment requirements for portable devices. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor qualities respectively. The supplier must comply with DLA packaging and quality requirements as referenced from the DLA Master List, and the contract enforces a zero variance tolerance on quantity. The point of contact for inquiries is Margaret Smith, and the item is classified under NAICS code 334220.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
FILTER, RADIO FREQUE
Solicitation # SPE7M5-26-T-358B
The contract pertains to the procurement of a radio frequency interference filter identified by part number RF13034E and NSN 5915-01-479-5585, with a quantity of four units required. Delivery is mandated within 28 days from the contract award, with shipment originating FOB origin and inspected and accepted at the destination. The item is classified as a critical application item, requiring strict adherence to packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, with no special marking codes applied. Packaging must conform to specific methods including dry preservation, unit container type A1, and intermediate container type D3 with no cushioning material. The contract explicitly prohibits the intentional use of mercury or mercury compounds in the product or its contact components, except for specific functional applications such as batteries, fluorescent lamps, sensors, weapons systems, or reagents specified by NAVSEA, with portable devices containing mercury requiring shock resistance and secondary containment per NAVSEA 5100-003D. All technical and quality requirements referenced via R and I numbers must be sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date depending on acquisition size. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the original required delivery date is December 13, 2026, with a need ship date of September 8, 2026. The contract is issued under solicitation SPE7M5-26-T-358B, with a unit price of $4.00 per unit, totaling $16.00, and the point of contact is Samuel Cooper of the Department of Defense’s Active Devices Division.
Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334412
New
DIBBS
NRP, POWER RACK INTE
Solicitation # SPE7M5-26-T-358E
This contract specifies the procurement of a Power Rack Assembly identified by NSN 5998-01-615-3636 and part number 508-00574-01 from KATO ENGINEERING INC., with a total quantity of eight units to be delivered FOB origin within 168 days of contract award. The item is subject to stringent technical and quality standards defined by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with MIL-STD-130 for Item Unique Identification (IUID) as mandated by DFARS 252.211-7003. All units require unique serial numbering on the item itself, intermediate packaging, and shipping container, with corresponding serials documented on the packing list per MIL-STD-129. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including reusable Type VI containers from Appendix C for circuit cards, with ESD and EMI protection as required by MIL-PRF-81705 using qualified barrier materials from QPL-81705 suppliers. The item is classified as ESD sensitive, necessitating cushioning prior to bagging, gentle air removal, heat sealing, and application of ESD handling labels. Special marking code 39 must appear on all containers in accordance with MIL-STD-129 and ASTM D5445, and the packaging design must pass safe delivery validation per MIL-STD-2073-1 and ASTM D4169, Distribution Cycle 18, Assurance Level 3. Prohibited materials include mercury or mercury compounds. Deliveries must reach the designated receiving warehouse in Tracy, CA, with no quantity variance allowed. The contract requires strict compliance with all prescribed packaging, marking, and handling procedures to ensure mission-critical readiness and safe transport.
Bare Printed Circuit Board Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
AMPLIFIER, RADIO FRE
Solicitation # SPE7M5-26-T-358F
The contract is for the procurement of four Radio Frequency Amplifiers with part number SXA3929 and NSN 5996-01-464-6320 under solicitation SPE7M5-26-T-358F, issued by the Department of Defense’s Active Devices Division as a Total Small Business Set-Aside. Delivery is required within 161 days to Tinker AFB, Oklahoma, with FOB Origin terms and a mandatory delivery date of July 27, 2027. The item must fully comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and the technical data cited in the solicitation—though incomplete—must still be met. The product is designated as ESD-sensitive, requiring DOD-qualified packaging per MIL-PRF-81705, including Type I and Type III barrier materials for electrostatic discharge and electromagnetic interference protection. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 marking standards, with special labeling code 39 indicating ESD sensitivity, and must include adequate cushioning to prevent lead damage. The supplier must verify all ESD/EMI packaging materials originate from QPL-81705 qualified manufacturers and use approved protective workstations during handling. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required, and configuration changes must be managed through formal engineering change proposals or variance requests. Removal of government identification from non-accepted supplies is prohibited. The unit of issue is each (EA), with no quantity variance allowed, and inspection and acceptance occur at destination. A required ship date of January 19, 2027, precedes the delivery deadline, and transportation must follow DLA Procurement Notes C19 and C20.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, N
Solicitation # SPE7M5-26-T-357F
The contract specifies the procurement of one variable resistor with NSN 5905-00-907-9823 and part number 7017659304, governed by military specification MIL-PRF-94/5K Revision K dated 09/26/2022, and incorporates technical and quality requirements from the DLA Master List referenced in RA001. All supplies must comply with DLA packaging standards (RP001), including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with special requirements indicating the use of marking code ZZ and adherence to IPC/JEDEC J-STD-609 for lead finish identification on each unit pack. The item is subject to qualified products or manufacturers lists (QPL/QML) as specified in RQ016, and qualification requirements in procurement note H02 apply. Delivery is required within 20 days FOB origin, with zero variance in quantity, and must be shipped by the fastest traceable means excluding parcel post to the delivery address at Fort Campbell, Kentucky. The unit is to be shipped in bulk using the break point code W80N5C, palletized per DLA requirements, and marked for government use with codes identifying the shipment, project, and contracting office. The required delivery date is July 27, 2026, with a response deadline of August 10, 2026, and this solicitation is for a federal acquisition under NAICS code 334416 with no setaside designation.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Preservation ServicesThe contract requires precise packaging, preservation, and marking of electrical connectors in full compliance with MIL-STD-2073-1E and MIL-STD-129 standards to ensure long-term storage and secure transport under military specifications. All work must meet rigorous military requirements for material compatibility, corrosion protection, labeling, and unit identification to safeguard component integrity throughout extended storage and operational deployment. The services are intended for delivery to a defined performance location in New Cumberland, Pennsylvania, with ZIP code 17070-5002, and must be executed by a qualified subcontractor capable of adhering to Department of Defense standards. The solicitation was posted on July 28, 2026, with a firm response deadline of August 10, 2026, and falls under the NAICS code 493190, which pertains to other support activities for transportation. The contracting activity is managed by the Active Devices Division under the Department of Defense, and bidders must submit proposals through the designated DIBBS portal by the specified deadline to be considered.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling ServicesThe contract involves providing hazardous materials compliance and labeling services to ensure all hazard warning labels and Safety Data Sheets meet the requirements of OSHA’s Hazard Communication Standard and relevant federal regulations including FIFRA, FDCA, CPSA, FHSA, and the FAA Act. The work requires meticulous adherence to regulatory standards for the accurate preparation, formatting, and documentation of chemical safety information to support safe handling, storage, and transportation of hazardous materials. The contractor must demonstrate proficiency in interpreting complex regulatory frameworks and translating them into compliant technical documentation. This is a subcontract under the Department of Defense’s Active Devices Division, with performance required at the location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026. The NAICS code 541690 identifies the scope as other scientific and technical consulting services, indicating the nature of the work is specialized and professional. The contract does not specify a set-aside type, and there is no designated point of contact provided in the data, requiring bidders to utilize the official DIBBS portal for further information or submissions.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details